CLD-CT1135.001 PRODUCT FAMILY DATA SHEET Cree® P4 LED CP43B-RGS CP43B-AGS PRODUCT DESCRIPTION FEATURES APPLICATIONS This revolutionary package design • Size (mm): 7.6 x 7.6 • Channel Letter • Color and Typical Dominant Wavelength: Red (624nm) Amber(591nm) • Amusement • Luminous Intensity (mcd) CP43B-RGS: (2130-8200) CP43B-AGS: (2130-8200) • Lead - Free • RoHS Compliant allows the lighting designer to reduce the number of LEDs required and provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible through the efficient optical-package design and highcurrent capabilities. The low-profile package can be easily coupled with reflectors or lenses to efficiently distribute light and provide the desired lit appearance. This product family employs green and blue LED materials, which allows designers to match the color of many lighting applications such as vehicle signal WWW.CREE.COM/HB lamps and amusement lighting. Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. the Cree logo are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp Cree P4 LED CP43B-RGS/AGS ABSOLUTE MAXIMUM RATINGS (TA = 25°C) Items Symbol Absolute Maximum Rating Unit Red/Amber Forward Current Peak Forward Current IF 70 mA Note1 IFP 200 mA Reverse Voltage VR 5 V Power Dissipation PD 210 mW Operation Temperature Topr -40 ~ +100 °C Storage Temperature Tstg -40 ~ +100 °C Lead Soldering Temperature Tsol Max. 260°C for 5 sec. max. (3 mm from the base of the epoxy bulb) ESD Class 2 Note2 Electrostatic Discharge Classification (MIL-STD-883E) Note: 1.A heat sink is recommended if the device is operated at ambient temperatures higher than 25°C. 2.Pulse width ≤0.1 msec, duty ≤1/10. TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C) Characteristics Color Symbol Condition Unit Forward Voltage Red/Amber VF IF = 70 mA V Reverse Current Red/Amber IR VR = 5 V μA Dominant Wavelength Luminous Intensity 50% Power Angle Minimum Typical Maximum 2.5 3.0 100 Red λD IF = 70 mA nm 618 624 630 Amber λD IF = 70 mA nm 584 591 599 Red IV IF = 70 mA mcd 2130 4500 2130 5000 Amber IV IF = 70 mA mcd Red/Amber 2θ½H-H IF = 70 mA deg 90 Red/Amber 2θ½V-V IF = 70 mA deg 35 Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 2 Cree P4 LED CP43B-RGS/AGS INTENSITY BIN LIMIT (IF = 70 mA) Red Amber Bin Code Min.(mcd) Max.(mcd) Bin Code Min.(mcd) Max.(mcd) V0 2130 3000 V0 2130 3000 W0 3000 4180 W0 3000 4180 X0 4180 5860 X0 4180 5860 Y0 5860 8200 Y0 5860 8200 • Tolerance of measurement of luminous intensity is ±15% COLOR BIN LIMIT (IF = 70 mA) Red Amber Bin Code Min.(nm) Max.(nm) Bin Code Min.(nm) Max.(nm) RA 618 630 A2 584 587 A3 587 590 A4 590 593 A5 593 596 A6 596 599 • Tolerance of measurement of dominant wavelength is ±1 nm VF BIN LIMIT (IF = 70 mA) Red Amber Bin Code Min. (V) Max. (V) Bin Code Min. (V) Max. (V) 23 2.0 2.2 23 2.0 2.2 24 2.2 2.4 24 2.2 2.4 25 2.4 2.6 25 2.4 2.6 26 2.6 2.8 26 2.6 2.8 27 2.8 3.0 27 2.8 3.0 • Tolerance of measurement of VF is ±0.05V. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 3 Cree P4 LED CP43B-RGS/AGS ORDER CODE TABLE* Color Kit Number Viewing Angle Red CP43B-RGS-CV0Y0AA4 Red Red Color Luminous Flux (mlm) Dominant Wavelength Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) 90 2130 8200 RA 618 RA 630 CP43B-RGS-CW0Y0AA4 90 3000 8200 RA 618 RA 630 CP43B-RGS-CX0Y0AA4 90 4180 8200 RA 618 RA 630 Kit Number Viewing Angle Min. Max. Color Bin Min. (nm) Color Bin Max. (nm) Amber CP43B-AGS-CV0Y0264 90 2130 8200 A2 584 A6 599 Amber CP43B-AGS-CW0Y0354 90 3000 8200 A3 587 A5 596 Amber CP43B-AGS-CX0Y0354 90 4180 8200 A3 587 A5 596 Luminous Flux (mlm) Dominant Wavelength Notes: 1. The above kit numbers represent order codes which include multiple flux-bin and color-bin codes. Only one flux-bin code and one color-bin code will be shipped on each reel. And single flux-bin code,single color bin-codes will not be orderable. 2. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions. 3. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 4 Cree P4 LED CP43B-RGS/AGS GRAPHS The above data are collected from statistical figures that do not necessarily correspond to the actual parameters of each single LED. Hence, these data will be changed without further notice. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 5 Cree P4 LED CP43B-RGS/AGS MECHANICAL DIMENSIONS All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted. An epoxy meniscus may extend about 1.5 mm down the leads. Burr around bottom of epoxy may be 0.5 mm max. NOTES RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/ EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. Vision Advisory Claim Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye. Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 6 Cree P4 LED CP43B-RGS/AGS KIT NUMBER SYSTEM All dimensions in mm.Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp Packaging Standard” document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner: Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 7 Cree P4 LED CP43B-RGS/AGS PACKAGING Features: • • • • • The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags. Cardboard boxes will be used to protect the LEDs from mechanical shock during transportation. The boxes are not water resistant, and they must be kept away from water and moisture. The Tube Pack type of packaging. Max 60 pcs per tube. R xxx xxx R C OL OR LED LAMP T YPE LXXXXXXXX-XXX LOT J OWAXXXXX -XX-XXX QT Y RANK P CS Iv Vf Hu e X XX XX AX XXX XXX XXX X Copyright © 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks Copyright © 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc. of Cree, Inc. 8