POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation RECTIFIER SINGLE DIODES MODULE - Full hermetic packaging - Base plate insulation uisng AlN substrate - Industrial compatible packaging - Contract screws available on request POSEICO SPA Via N. Lorenzi 8, 16152 Genova - ITALY Tel. +39 010 6556234 - Fax +39 010 6557519 Sales Office: Tel. +39 010 6556775 - Fax +39 010 6442510 AZD1080 Repetitive voltage up to Mean on-state current Surge current 2800 V 1080 A 30 kA TARGET SPECIFICATION feb 04 - ISSUE : 0 Symbol Characteristic Tj [°C] Conditions Value Unit BLOCKING V RRM Repetitive peak reverse voltage 150 2800 V V RSM Non-repetitive peak reverse voltage 150 2900 V I RRM Repetitive peak reverse current 150 75 mA CONDUCTING I F (AV) Mean on-state current 180° sin, 50Hz, Tc=100°C I F (AV) Mean on-state current 180° sin. 50Hz, Tc=55°C I FSM Surge on-state current sine wave, 10 ms I² t without reverse voltage V F On-state voltage On-state current = V F(TO) r F R th(j-c) Thermal impedance Junction to case 42 °C/kW R th(c-h) Thermal impedance Case to heatsink 15 °C/kW T j Operating junction temperature -30 / 150 °C V ins RMS insulation voltage 50Hz, circuit to base,all terminal shorted Mounting tourque Case to heatsink Busbars to terminals I² t 1080 150 1800 A A 1760 A 30 kA 4500 x1E3 A²s 25 1.20 V Threshold voltage 150 0.80 V On-state slope resistance 150 0.110 mohm MOUNTING T Mass ORDERING INFORMATION : AZD1080 S 28 standard specification VRRM/100 25 4500 V 4 to 6 12 to 18 2800 Nm Nm g AZD1080 RECTIFIER SINGLE DIODES MODULE TARGET SPECIFICATION POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation feb 04 - ISSUE : 0 SURGE CHARACTERISTIC Tj = 150 °C 3500 35 3000 30 2500 25 2000 20 ITSM [kA] On-state Current [A] ON-STATE CHARACTERISTIC Tj = 150 °C 1500 15 1000 10 500 5 0 0 0 0.5 1 1.5 1 10 n° cycles On-state Voltage [V] 100 177 90 45.0 79.5 4 TRANSIENT THERMAL IMPEDANCE G-K Terminali A 2.8x0.8 40.0 104 70 Ø6 30.0 .5 70 1 2 46 30 3 Ø1 25.0 58 Zth j-c [°C/kW] 35.0 V5 20.0 80 92 15.0 10.0 5.0 0.0 0.001 2 0.01 0.1 1 10 1 100 t[s] Distributed by All the characteristics given in this data sheet are guaranteed only with uniform clamping force, cleaned and lubricated heatsink, surfaces with flatness < .03 mm and roughness < 2 µm. In the interest of product improvement POSEICO SPA reserves the right to change any data given in this data sheet at any time without previous notice. If not stated otherwise the maximum value of ratings (simbols over shaded background) and characteristics is reported.