POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation RECTIFIER DIODE POSEICO SPA Via Pillea 42-44, 16153 Genova - ITALY Tel. + 39 010 8599400 - Fax + 39 010 8682006 Sales Office: Tel. + 39 010 8599400 - Fax + 39 010 8681180 AR3001LT Repetitive voltage up to Mean forward current Surge current 1000 V 5835 A 50.4 kA FINAL SPECIFICATION set 02 - ISSUE : 03 Symbol Characteristic Tj [°C] Conditions Value Unit BLOCKING V RRM Repetitive peak reverse voltage 190 1000 V V RSM Non-repetitive peak reverse voltage 190 1100 V I RRM Repetitive peak reverse current 190 75 V=VRRM mA CONDUCTING I F (AV) Mean forward current 180° sin ,50 Hz, Th=55°C, doub le side cooled 5835 A I F (AV) Mean forward current 180° sin ,50 Hz, Tc=85°C, double side cooled 6460 A I FSM Surge forward current Sine wave, 10 ms without reverse voltage 50.4 kA I² t I² t V FM Forward voltage V F(TO) r F 190 12701 x 1E3 Forward current = 4500 A A²s 25 1.16 V Threshold voltage 190 0.75 V Forward slope resistance 190 0.055 mohm SWITCHING t rr Reverse recovery time Q rr Reverse recovery charge I rr Peak reverse recovery current µs 190 µC A MOUNTING R th(j-h) Thermal impedance, DC Junction to heatsink, double side cooled R th(c-h) Thermal impedance Case to heatsink, double side cooled T Operating junction temperature F j Mounting force 15 °C/kW 5 °C/kW -30 / 190 °C 22.0 Mass 200 ORDERING INFORMATION : AR3001LT S 10 standard specification VRRM/100 / 24.5 kN g AR3001LT RECTIFIER DIODE FINAL SPECIFICATION POSEICO POSEICO SPA POwer SEmiconductors Italian COrporation set 02 - ISSUE : 03 FORWARD CHARACTERISTIC Tj = 190 °C SURGE CHARACTERISTIC Tj = 190 °C 20000 60 18000 50 14000 40 12000 ITSM [kA] Forward Current [A] 16000 10000 8000 30 20 6000 4000 10 2000 0 0 0,6 1,1 1,6 Forward Voltage [V] 1 10 n°cycles TRANSIENT THERMAL IMPEDANCE DOUBLE SIDE COOLED 16,0 14,0 Zth j-h [°C/kW] 12,0 10,0 8,0 6,0 4,0 2,0 0,0 0,001 0,01 0,1 1 10 t[s] Distributed by All the characteristics given in this data sheet are guaranteed only with uniform clamping force, cleaned and lubricated heatsink, surfaces with flatness < .03 mm and roughness < 2 µm. In the interest of product improvement POSEICO SPA reserves the right to change any data given in this data sheet at any time without previous notice. If not stated otherwise the maximum value of ratings (simbols over shaded background) and characteristics is reported. 100