SCM2012FH-I Series –SMD COMMON MODE CHOKE COILS Rev. A A. Electrical Specifications: Impedance P/N @100MHz DCR Max. (Ω) SCM2012FH-670_-I SCM2012FH-900_-I SCM2012FH-121_-I 67 90 120 0.30 0.40 0.45 (Ω) Rated Current Max.(mA) Rated Voltage (Vdc) Withstand Voltage (Vdc) Insulation Resistance Min. (MΩ) @125Vdc 400 300 250 50 50 50 125 125 125 10 10 10 B. Dimensions: mm (Inch) Series SCM2012FH-I Tol. a 2.0 (0.079) ±0.2 (0.008) b 1.2 (0.047) ±0.2 (0.008) c 1.2 (0.047) ±0.2 (0.008) d 0.45 (0.018) e 0.4 (0.016) f 2.6 (0.102) g 0.8 (0.031) h 1.2 (0.047) i 0.4 (0.016) Typ. Typ. Typ. Typ. Typ. Typ. C. Schematic: D. General Information: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. SCM2012FH-xxx_-I, “SCM2012FH” = P/N, “xxx” = Impedance, “_” = Tolerance, “-I” = Internal code. Tolerance “_”: M: ± 20% Small size & low profile Maximum Temperature Rise: 15°C (when measured at 25°C ambient). Impedance measured with HP4291B RF Impedance Analyzer DCR measured using the 16502 milliohm meter. Operating temperature: -40°C to +125ºC Storage temperature: -40°C to +125ºC Impedance and Current Range: From 67 Ohms (400 mA) to 120 Ohms (250 mA) Unspecified values available on request. MSL: Level 1. E. Applications: 1. 2. Common mode noise suppression of signal lines in high speed and high-density digital equipment, such as personal computers and peripherals. The cut-off frequency of HDMI for differential mode is 3.5 GHz and 6GHz respectively, so they don’t interfere with higher-speed differential signals such as DVI, HDMI. The product is suited for use on the transmission side of digital TVs, DVD recorders and liquid crystal projectors. Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 SCM2012FH-I Series –SMD COMMON MODE CHOKE COILS Rev. A F. Characteristics Curve: Impedance vs. Frequency (Common Mode) Impedance vs. Frequency (Normal Mode) Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989