Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com SMD Wire Wound EMI Common Mode Chip—SCM3216F series A. Electrical specifications: Part Number Common Mode Impedance (Ω) (Typical) @ 100MHz Rated Current (mA) DC Resistance (ohm) Max. Rated Voltage (Vdc) Withstand Voltage (Vdc) Insulation Resistance @125VdC (MΩ) Min. SCM3216F-900M SCM3216F-161M SCM3216F-261M SCM3216F-601M SCM3216F-102M SCM3216F-222M 90 160 260 600 1000 2200 370 340 310 260 230 200 0.30 0.40 0.50 0.80 1.0 1.2 50 125 10 (1) (2) (4) (3) B. Mechanical Drawing: 1.60 ± 0.2 0.17 1.9 ± 0.2 3.2 ± 0.2 0.60 (Typ) (4) (3) 1.60 3.70 1.60 (2) 0.40 (1) Unit: mm 0.60(Typ) C. Features: 1. 2. 3. 4. 5. 6. 7. Tolerance: M:±20. Small size, low profile. Impedance range: from 90Ω to 2200Ω. High common mode impedance at high frequency effects. Excellent noise suppression performance. Temperature rise: 15ºC at rated current on 25ºC ambient. Operating temperature: From –40ºC to +85°C. D. Applications: 1. Common mode noise suppression of signal lines in high speed and high-density digital equipment, such as personal computers and peripherals. 2. Suitable for differential signal line such as USB2.0, IEEE1394 and LVDS, capable of high speed signal transmission without distortion due to its high coupling. SMD wire wound Common Mode Chip Inductor: P/N SCM3216F-series Oct. 10, 2004. Page: 1 of 2 Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com SMD Wire Wound EMI Common Mode Chip—SCM3216F series E. Impedance curve: Special specifications are available for customer’s requirement. SMD wire wound Common Mode Chip Inductor: P/N SCM3216F-series Oct. 10, 2004. Page: 2 of 2