RoHS AR11-3847I Single Port RJ45 Connector 10/100/1000 Base-T Gigabit for Ethernet Application Impedance: 100OHMS RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Industrial Temp: -40ºC to +85ºC Contact Factory for Standard Temp. Available in other Circuit Designs Optional Gold Plating Thickness Electrical Specifications @ 25°C Part Number AR11-3847I OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Turns Ratio chip: cable (±2%) 1CT:1CT Insertion Loss (dB Max) 1-100MHz -1.0 1-30MHz -18 Return Loss (dB Min) 30-60MHz -18-20Log(F/30MHz) 60-80MHz -12 Electrical Specifications @ 25°C CMR CDMR Cross Talk HI-POT (dB Min) (dB Min) (dB Min) (Vrms) 0.5-1MHz 10MHz 30MHz 50MHz 100MHz 0.3-1MHz 10MHz 30MHz 60MHz 100MHz 0.3-1MHz 10MHz 30MHz 60MHz 100MHz 0.5mA/2Sec. -40 -35 -37 -50 -50 -40 -50 -50 -30 1500 -47 -30 -42 -45 -50 -50 All specifications subject to change without notice. MECHANICAL 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 15 06/03/13 www.alliedcomponents.com RoHS RoHS Single Port RJ45 Connector AR11-3847I SCHEMATICS LED Schematic Code: L (See chart below) LED Code A B C D E F G H I J K L M Left LED Right LED +11, -12 -11, +12 +13, -14 -13, +14 Green Yellow Yellow Green Green Green Green Yellow Yellow Green Yellow Orange Green Orange Green Yellow Green Yellow Green Green Orange Yellow Green Yellow Green Yellow Green Green Yellow Yellow Green Orange Green Orange Green - PCB LAYOUT NOTES 1. Shield- 0.20mm THICKNESS BRASS C2680 H. PLATING NICKEL 30u-50u" Min. 2. HousingStandard Material FR52, Glass filled Polyester UL94V-0 Standard Color Black. 3. RJ Terminal- Plastic: FR52 GF UL94V-0, Standard Color Black. Pin: 0.35mm Thickness Phos-Bronze C5210 EH. Plating: Nickel 40u"-60u" for all and Sn 100%, and 3u” Gold Plating. 4. Input Terminal: Plastic FR2, Glass Filled, UL94V-0, Standard Color Black. Pin: 0.35mm Thickness Phos-Bronze SUS430. Plating: Nickel 40u"-60u" for all and Sn 100%. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 15 06/03/13 www.alliedcomponents.com