RoHS SINGLE PORT RJ45 10/100 BASE-T AR11-3861 10/100 Base-T Ethernet Application Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard operating temp: 0ºC to +70ºC Electrical Specifications @ 25°C Part Number AR11-3861 OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Insertion Loss (dB Max) 0.3-100MHz -1.0 Turns Ratio chip: cable ( ± 3%) 1CT:1CT 30MHz -18 Return Loss (dB Min) 50MHz -15 80MHz -12 Electrical Specifications @ 25°C Part Number AR11-3861 30MHz -38 Cross Talk (dB Min) 60MHz -38 100MHz -38 30MHz -40 CMR (dB Min) 60MHz -40 100MHz -40 HI-POT (Vrms) 0.8mA/2Sec. 1500 All specifications subject to change without notice. MECHANICAL 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 06/21/13 www.alliedcomponents.com RoHS SINGLE PORT RJ45 10/100 BASE-T AR11-3664 SCHEMATICS LED Schematic Code: B (See chart below) LED Code A B C D E F G H I W Left LED +9, -10 -9, +10 Green Yellow Green Green Yellow Yellow Orange Green Orange Green Green - Right LED +11, -12 -11, +12 Yellow Green Green Yellow Green Orange Green Yellow Yellow Yellow Yellow PCB LAYOUT NOTES 1. Shield2. Housing3. RJ Terminal- 0.20mm THICKNESS BRASS C2680 H. PLATING NICKEL 20" min Standard Material Nylon66, Glass filled Polyester UL94V-0 Standard Color Black. Plastic: Nylon66 G.F, UL94V-0, Standard Color Black. Pin: 0.35mm Thickness Phos-Bronze C5210 EH. Plating: Nickel 40u”~60u”, for all and Sn100u-120u, and Gold Plating 6”. 4. Input Terminal Plastic: Nylon66, G.F, Glass Filled, UL94V-0, Standard Color Black. Pin: 0.35mm Thickness Phos-Bronze C2680. Plating: Nickel 40u"-60u" for all and Sn 100u”-120u” 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 06/21/13 15 www.alliedcomponents.com