NSL-32-034 Optocoupler Features 5.7 min. Compact, moisture resistant package Low LED current Fast rise and decay time Passive resistance output Low distortion Ideal for applications requiring matched devices 25.4 min. Photocell 2.54 + LED Description This optocoupler consists of an LED input optically coupled to a photocell. The photocell resistance is high when the LED current is “off” and low resistance when the LED current is “on”. Absolute Maximum Ratings Storage Temperature Operating Temperature Soldering Temperature (1) Isolation Voltage (peak) Anode lead 0.25 x 0.51 -40 to +75C -40 to +75C 260C 2000V 6.0 - 6.5 - 0.45-0.56 cell leads Dimensions in mm. Lead spacing tolerance: +/-0.13 3.30 Color dot 5.72 - 6.22 Cathode lead 0.25 x 0.64 + LED Photocell Circuit Schematic Electrical Characteristics (TA=25C unless otherwise noted) Symbol Parameter Min. Typ. Max. Units Test Conditions LED IF Forward Current 40 mA (2) VF Forward Voltage 2.0 V IF = 16 mA IR Reverse Current 100 A VR = 4V Cell VC Maximum Cell Voltage 60 V (Peak AC or DC) PD Power Dissipation 50 mW (2) Coupled RON On Resistance 1.5 K IF = 10mA A 9.0 12 B 12 15 K IF = 1mA C 15 18 ROFF Off Resistance 5 M 10 sec after IF = 0, 5Vdc on cell. TR Rise Time 3.5 msec Time to 63% of final conductance @ IF = 16 mA TF Decay Time 12 msec Time to 100K after removal of IF = 16 mA TC Cell Temp Coefficient 0.6 %/C IF > 5 mA Specifications subject to change without notice REV 04/17-14 Note: (1) Derate linearly to 0 at 75C. (2) Cells are light adapted @ 30 - 50 ftc. for 16 hour minimum prior to test. (3) > 0.08” from case for < 5 sec. (4) Packaged in ranges, printed with part number NSL-32-034, followed by a letter “A”, “B” or “C” Advanced Photonix Canada Inc., 300 St-Sacrement Suite 519 Montréal, QC, Canada H2Y 1X4 Page 1 Phone:(514) 768-8000 Fax: (514) 768-8889 http://www.advancedphotonix.com