Surface Mount Multilayer Ceramic Chip Capacitors

V I S H AY I N T E R T E C H N O L O GY, I N C .
INTERACTIVE
data book
SURFACE MOUNT MULTILAYER
CERAMIC CHIP CAPACITORS
VISHAY
Notes:
1. To navigate:
a) Click on the Vishay logo in any document to go to the overview page.
b) Click on the document name within the overview to go directly to the
document.
c) Use the scroll or page up / page down functions.
d) Use the Adobe ® Acrobat ® page function in the browser bar.
2. To search the text of the catalog, use the Adobe ® Acrobat ® search function.
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
VSE-DB0097-1502
V I SHAY I NTE RTE CHNO L O GY, IN C .
SURFACE MOUNT MULTILAYER
CERAMIC CHIP CAPACITORS
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
DATA BOOK
VSE-DB0097-1502
CERAMIC CAPACITORS
Vishay
SEMICONDUCTORS
MOSFETS SEGMENT
MOSFETs
Low-Voltage TrenchFET® Power MOSFETs
Medium-Voltage Power MOSFETs
High-Voltage Planar MOSFETs
High-Voltage Super Junction MOSFETs
Automotive-Grade MOSFETs
ICs
Power Management and Power Control ICs
Smart Load Switches
Analog Switches and Multiplexers
PRODUCT LISTINGS
DIODES SEGMENT
Rectifiers
Schottky Rectifiers
Ultra-Fast Recovery Rectifiers
Standard and Fast Recovery Rectifiers
High-Power Rectifiers/Diodes
Bridge Rectifiers
Small-Signal Diodes
Schottky and Switching Diodes
Zener Diodes
Tuner / Capacitance Diodes
Bandswitching Diodes
RF PIN Diodes
Protection Diodes
TVS Diodes or TRANSZORB®
(uni-directional, bi-directional)
ESD Protection Diodes (including arrays)
Thyristors / SCRs
Phase-Control Thyristors
Fast Thyristors
Power Modules
Input Modules
(diodes and thyristors)
Output and Switching Modules
(contain MOSFETs, IGBTs, and diodes)
Custom Modules
OPTOELECTRONIC COMPONENTS
SEGMENT
Infrared Emitters and Detectors
Optical Sensors
Infrared Remote Control Receivers
Optocouplers
Phototransistor, Photodarlington
Linear
Phototriac
High-Speed
IGBT and MOSFET Driver
Solid-State Relays
LEDs and 7-Segment Displays
Infrared Data Transceiver Modules
Custom Products
PASSIVE COMPONENTS
RESISTORS AND INDUCTORS SEGMENT
Film Resistors
Metal Film Resistors
Thin Film Resistors
Thick Film Resistors
Metal Oxide Film Resistors
Carbon Film Resistors
Wirewound Resistors
Vitreous, Cemented, and Housed Resistors
Braking and Neutral Grounding Resistors
Custom Load Banks
Power Metal Strip® Resistors
Chip Fuses
Variable Resistors
Cermet Variable Resistors
Wirewound Variable Resistors
Conductive Plastic Variable Resistors
Contactless Potentiometers
Networks / Arrays
Non-Linear Resistors
NTC Thermistors
PTC Thermistors
Varistors
Magnetics
Inductors
Transformers
Coils
Connectors
CAPACITORS SEGMENT
Tantalum Capacitors
Molded Chip Tantalum Capacitors
Coated Chip Tantalum Capacitors
Solid Through-Hole Tantalum Capacitors
Wet Tantalum Capacitors
Ceramic Capacitors
Multilayer Chip Capacitors
Disc Capacitors
Film Capacitors
Power Capacitors
Heavy-Current Capacitors
Aluminum Electrolytic Capacitors
Vishay
Surface Mount Multilayer
Ceramic Chip Capacitors
Vishay Electronic GmbH
Dr.-Felix-Zandman-Platz 1
D-95100 Selb
Germany
Phone: +49 9287 710
Fax: +49 9287 70435
www.vishay.com
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of
June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE)
- recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Table of Contents
www.vishay.com
Vishay
Surface Mount Multilayer Ceramic Chip Capacitors
Part Numbering / Ordering Information................................................................................................................................
2
MLCCs FOR COMMERCIAL APPLICATIONS (NME TECHNOLOGY)
VJ Commercial Series ............................................................................................................................................................
5
MLCCs FOR HIGH TEMPERATURE APPLICATIONS (NME TECHNOLOGY)
VJ X8R .................................................................................................................................................................................... 20
MLCCs FOR AUTOMOTIVE APPLICATIONS (NME TECHNOLOGY)
VJ....31X RoHS Automotive MLCC ........................................................................................................................................ 26
VJ....31 / VJ....34 Automotive MLCC ..................................................................................................................................... 45
MLCCs FOR HIGH VOLTAGE AND SAFETY APPLICATIONS (NME TECHNOLOGY)
VJ OMD Series .......................................................................................................................................................................
VJ HVArc Guard® ...................................................................................................................................................................
VJ Source Energy Capacitor (SEC) ........................................................................................................................................
VJ Controlled Discharge Capacitor (CDC)..............................................................................................................................
VJ Safety Certified Capacitors C0G (NP0)..............................................................................................................................
VJ Safety Certified Capacitors X7R........................................................................................................................................
66
80
88
93
98
102
MLCCs FOR RF AND HIGH FREQUENCY APPLICATIONS
VJ HIFREQ Series...................................................................................................................................................................
QUAD HIFREQ Series.............................................................................................................................................................
VJ High Q ...............................................................................................................................................................................
VJ....W1BC High Q Dielectric .................................................................................................................................................
VJ....W1BC Ultra High Q / Low ESR ......................................................................................................................................
107
117
130
134
140
MLCCs FOR NON-MAGNETIC APPLICATIONS (NME TECHNOLOGY)
VJ Non-Magnetic Series for IR Reflow Soldering.................................................................................................................... 147
VJ Non-Magnetic Series for Epoxy Bonding .......................................................................................................................... 163
MLCCs FOR HIGH RELIABILITY AND MILITARY / AEROSPACE APPLICATIONS (NME TECHNOLOGY)
VJ Hi-Rel Series......................................................................................................................................................................
CDR-MIL-PRF-55681 .............................................................................................................................................................
DSCC 03029...........................................................................................................................................................................
DSCC 03028...........................................................................................................................................................................
DSCC 05006...........................................................................................................................................................................
DSCC 05007...........................................................................................................................................................................
DSCC 05001...........................................................................................................................................................................
DSCC 05002...........................................................................................................................................................................
DSCC 05003...........................................................................................................................................................................
180
194
205
209
214
218
222
226
230
MLCCs FOR BASIC COMMODITY APPLICATIONS (BME TECHNOLOGY)
VJ….W1BC Basic Commodity Series..................................................................................................................................... 235
VJ….W1BC Ultra Small Series 0201 ...................................................................................................................................... 249
VJ.…W1BC MLCC Chip Array ............................................................................................................................................... 254
RELATED DOCUMENTS AND REQUIREMENTS
VJ Vitramon Packaging ..........................................................................................................................................................
VJ Soldering Recommendations ............................................................................................................................................
VJ Marking Options ................................................................................................................................................................
Vishay Vitramon MLCC End Termination................................................................................................................................
VJ….W1BC Test Procedures and Requirements ...................................................................................................................
VJ....W1BC Soldering and Footprint Design...........................................................................................................................
Revision: 18-Feb-15
1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
260
265
268
270
272
278
Multilayer Ceramic Chip Capacitors
www.vishay.com
Vishay
Part Numbering / Ordering Information
PART NUMBERING / ORDERING INFORMATION (1)
VJ0805
Y
CASE
DIELECTRIC
CODE (5)
0201
0402
A=
C0G (NP0)
0505
Y = X7R
0603
G = X5R
06C4 (3)
H = X8R
0805
Q = high Q
1111
V = Y5V
1206
1210
1808
1812
L=
ultra high Q
low ESR
D = HIFREQ
1825
2008
2012
2220
2225
2525
3040
3640
3838
4044
102
K
CAPACITANCE
TOLERANCE
NOMINAL
CODE
CODE
Expressed in
picofarad (pF).
The first
two digits are
significant,
the third is
a multiplier.
An “R”
indicates
a decimal
point.
Example:
0R3 = 0.3 pF
4R7 = 4.7 pF
102 = 1000 pF
473 = 47 000 pF
V = ± 0.05 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
F=±1%
G=±2%
H=±3%
J=±5%
K = ± 10 %
M = ± 20 %
Z=
-20 % / +80 %
X
A
A
C
2L
TERMINATION
VOLTAGE
RATING
MARKING
OPTION (2)
PACKAGING
PROCESS
CODE (6)
T = 7" reel /
plastic tape
00, 54 =
standard
X = Ni barrier
100 % matte tin
plate finish
Y = 6.3 VDC A = unmarked
Q = 10 VDC
M = marking
31, 34, 31X =
C = 7" reel /
vendor ID +
J = 16 VDC
automotive
B = polymer
paper tape
2 character
100 % matte tin X = 25 VDC
cap. code
4X, 5H =
plate finish
O = 7" reel /
(size 0805 /
Z = 35 VDC 1206 / 0505 / flamed paper tape open mode
F, E = AgPd (4)
used for AgPd
1111 / 2525 /
A = 50 VDC
5Z =
termination
3838)
HVArc
0402 / 0603 / 0805
L = Ni barrier
B = 100 VDC
Guard®
B = marking
tin / lead plate
J = 7" reel
min. 4 % lead C = 200 VDC for automotive
(low quantity)
VJ....31 /
X1, X2 =
P = 250 VDC
VJ....31X
N=
safety caps
E = 7" reel /
vendor ID +
non-magnetic (7)
D = 300 VDC
plastic tape
date code
SE =
only used
Source
C = copper barrier T = 400 VDC (size 0805 /
automotive
1206)
Energy
100 % matte
VJ...31 / VJ...34
Capacitor
tin plate finish E = 500 VDC
S = marking
(SEC)
(non-magnetic) (7)
L = 630 VDC for safety caps
R=
11 1/4" / 13" reel /
8R =
I = 800 VDC
plastic tape
Controlled
Discharge
G = 1000 VDC
P=
Capacitor
R = 1500 VDC
11 1/4" / 13" reel /
(CDC)
paper tape
F = 2000 VDC
2L, 2M,
I=
68, 5G =
O = 2500 VDC
11 1/4" / 13" reel /
high-rel.
H = 3000 VDC
flamed paper tape
used for AgPd
W1BC =
W = 3600 VDC
termination
basic
0402 / 0603 / 0805 commodity
M = 5000 V
DC
S = 7200 VDC
S = 4 VDC
only for
VJ...W1BC
series
U = 250 VAC
M=
11 1/4" / 13" reel /
plastic tape
only used
automotive
VJ...31 / VJ...34
Notes
(1)
(2)
(3)
(4)
(5)
(6)
(7)
For details see individual datasheets
Marking option is not available in process code W1BC
Chip array size 0612 including 4 capacitors VJ06C4...W1BC, only Basic Commodity Series
Termination code “E” for conductive epoxy assembly, contact [email protected] for availability
Case size designator may be replaced by a four digit drawing number
Customer specific process codes are also possible
For non-magnetic termination, “C” is recommended for solder assembly, and “N” for conductive epoxy assembly
Revision: 29-Oct-14
Document Number: 45067
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Multilayer Ceramic Chip Capacitors
www.vishay.com
Vishay
PART NUMBERING / ORDERING INFORMATION MILITARY PRODUCTS
CDR31
BX
MILITARY
STYLE
CDR01
CDR02
CDR03
CDR04
CDR06
CDR31
CDR32
CDR33
CDR34
103
A
K
Z
DC
TOLERANCE
DIELECTRIC CAPACITANCE VOLTAGE
TERMINATION
CODE
RATING
BP
BX
P
A
T
FAILURE
RATE
MARKING
OPTION
PACKAGING
Expressed in
A = 50 V C = ± 0.25 pF
M = silver
M = 1.0 %
picofarad (pF). B = 100 V D = ± 0.50 pF
palladium
P = 0.1 %
The first two
F=±1%
R = 0.01 %
digits are
J=±5%
Y = Ni barrier S = 0.001 %
significant, the
K = ± 10 % 100 % tin plate
third is a
M = ± 20 %
matte finish
Consult
multiplier.
factury for
An “R” indicates
W = Ni barrier
failure rate
a decimal point.
100 % tin plate
status
Example:
matte finish
4R7 = 4.7 pF
102 = 1000 pF
Z = Ni barrier
100 % tin / lead
plate min. 4 %
A=
unmarked
T = 7" reel /
plastic tape
J = 7" reel (low qty.)
C = 7" reel /
paper tape
R=
11 1/4" / 13" reel /
plastic tape
P=
11 1/4" / 13" reel /
paper tape
B = bulk
U = hot solder
dipped min.
4 % lead
Note
• For details of ratings, see individual datasheet
PART NUMBERING / ORDERING INFORMATION DSCC PRODUCTS
03028DSCC
STYLE
03028030290500605007-
BX
102
A
K
DC
TOLERANCE
DIELECTRIC CAPACITANCE VOLTAGE
CODE
RATING
BP
BX
BR
Expressed in
picofarad (pF).
The first two
digits are
significant, the
third is a
multiplier.
An “R” indicates
a decimal point.
Example:
4R7 = 4.7 pF
102 = 1000 pF
X = 10 V
Y = 16 V
Z = 25 V
A = 50 V
B = 100 V
C = 200 V
Z
C
J
TERMINATION
GROUP TESTING
PACKAGING
C = full group C
L = 2000 h life test only
M = 1000 h life test only
H = low voltage
humidity test only
- = group A test only
T = 7" reel /
plastic tape
J = 7" reel (low qty.)
C = 7" reel /
paper tape
O = 7" reel /
flamed paper tape
R = 11 1/4" / 13" reel /
plastic tape
P = 11 1/4" / 13" reel /
paper tape
I = 11 1/4" / 13" reel /
flamed paper tape
B = bulk
C = ± 0.25 pF
M = silver
D = ± 0.50 pF
palladium
F=±1%
G=±2%
Z = Ni barrier tin /
J=±5%
lead plate
K = ± 10 %
min. 4 % lead
M = ± 20 %
U = hot solder
dipped
min. 4 % lead
Note
• For details of ratings, see individual datasheet
PART NUMBERING / ORDERING INFORMATION DSCC PRODUCTS
05001-
4R7
A
C
Z
C
J
DSCC
STYLE
CAPACITANCE
DC
VOLTAGE
RATING
TOLERANCE
CODE
TERMINATION
GROUP TESTING
PACKAGING
M = silver
palladium
C = full group C
L = 2000 h life test only
M = 1000 h life test only
H = low voltage
humidity test only
- = group A test only
T = 7" reel / plastic tape
J = 7" reel (low qty.)
C = 7" reel / paper tape
O = 7" reel / flamed paper tape
R = 11 1/4" / 13" reel /
plastic tape
P = 11 1/4" / 13" reel /
paper tape
I = 11 1/4" / 13" reel /
flamed paper tape
B = bulk
050010500205003-
Expressed in
picofarad (pF).
The first two
digits are
significant, the
third is a
multiplier.
An “R” indicates
a decimal point.
Example:
4R7 = 4.7 pF
A = 50 V
B = 100 V
C = 200 V
K = 250 V
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Z = Ni barrier tin /
lead plate
min. 4 % lead
Notes
• For details of ratings, see individual datasheet
• Contact [email protected] for availability
Revision: 29-Oct-14
Document Number: 45067
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
VJ Commercial Series............
MLCCs
for
Commercial
Applications
(NME Technology)
5
VJ Commercial Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Commercial Applications
FEATURES
• C0G (NP0) and X7R dielectrics offered
• C0G (NP0) is an ultra-stable dielectric offering a
very low Temperature Coefficient of Capacitance
(TCC)
• C0G (NP0) offers low dissipation
• Excellent aging characteristics
• Ideal for decoupling and filtering (X7R)
• Ideal for surge suppression and high voltage Available
applications
• Wide range of case sizes, voltage ratings and capacitance
values
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
•
•
•
•
Timing and tuning circuits
Sensor and scanner applications
Decoupling and filtering
Surge suppression
ELECTRICAL SPECIFICATIONS
C0G (NP0) DIELECTRIC
X7R DIELECTRIC
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +150 °C
(above +125 °C changed characteristics)
Operating Temperature: -55 °C to +150 °C
(above +125 °C changed characteristics)
Capacitance Range: 1 pF to 56 nF
Capacitance Range: 120 pF to 6.8 μF
Voltage Range: 25 VDC to 1000 VDC
Voltage Range: 16 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Temperature Coefficient of Capacitance (TCC):
± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values  1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Dissipation Factor (DF):
16 V / 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
> 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
250 % of rated voltage
 200 VDC-rated:
500 VDC-rated:
200 % of rated voltage
630 VDC,1000 VDC-rated:
150 % of rated voltage
Revision: 09-Sep-14
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
 250 VDC-rated:
250 % of rated voltage
500 VDC-rated:
min. 150 % of rated voltage
630 VDC, 1000 VDC-rated: min. 120 % of rated voltage
Document Number: 45199
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
0402
100
1.0 pF
220 pF
0603
200
1.0 pF
1.0 nF
0805
500
1.0 pF
4.7 nF
1206
630
1.0 pF
10 nF
1210
630
56 pF
12 nF
1808
1000
18 pF
10 nF
1812
1000
39 pF
22 nF
1825
500
100 pF
39 nF
2220
1000
270 pF
47 nF
2225
1000
270 pF
56 nF
0402
100
120 pF
47 nF
0603
200
330 pF
150 nF
0805
250
330 pF
470 nF
1206
630
330 pF
1.0 μF
1210
630
390 pF
1.0 μF
1808
1000
470 pF
270 nF
1812
1000
1.0 nF
1.0 μF
1825
1000
10 nF
2.7 μF
2220
500
15 nF
2.2 μF
2225
1000
33 nF
4.7 μF
3640
500
27 nF
6.8 μF
CASE
C0G (NP0)
X7R
Note
• Detail ratings see “Selection Chart”
Revision: 09-Sep-14
Document Number: 45199
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
ORDERING INFORMATION
VJ0805 (1)
Y
102
K
X
A
A
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION
DC
VOLTAGE
RATING (2)
MARKING
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
3640
A = C0G
(NP0)
Y = X7R
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Examples:
1R8 = 1.8 pF
102 = 1000 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.5 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Note
C0G (NP0):
B, C, D < 10 pF
F, G, J, K 10 pF
X7R:
J, K, M
X = Ni barrier
100 % tin plated
matte finish
F, E = AgPd (4)
B = polymer
100 % tin plated
matte finish (5)
A=
J = 16 V
unmarked
X = 25 V
M = marked
A = 50 V
Note
B = 100 V
Marking
C = 200 V
is only
P = 250 V
E = 500 V available for
0805 and
L = 630 V
G = 1000 V 1206 with
termination
code “X” /
“B”
### (3)
T
PACKAGING PROCESS
CODE
C = 7" reel / paper tape
T = 7" reel / plastic tape
P = 11 1/4"/13" reel /
paper tape
R = 11 1/4"/13" reel /
plastic tape
O = 7" reel /
flamed paper tape
I = 11 1/4" / 13"reel /
flamed paper tape
Note
“I” and “O” are used for
“F”, “E” termination
size 0402 / 0603 / 0805
Notes
(1)
(2)
(3)
(4)
(5)
Case size designator may be replaced by four digit drawing number used to control non-standard products and / or special requirements
DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
Process code may be added with up to three digits, used to control non-standard products and / or special requirements
Termination code “E” is for conductive epoxy assembly
Selected values available, contact [email protected] for list of released ratings
ENVIRONMENTAL STATUS
TERMINATION CODE
TERMINATION DESCRIPTION
RoHS COMPLIANT
VISHAY GREEN
X
Ni barrier 100 % tin plated matte finish
Yes
Yes
E
AgPd
Yes
Yes
B
Polymer layer, 100 % tin plated matte finish
Yes
No
F
AgPd
Yes
No
Revision: 09-Sep-14
Document Number: 45199
7
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
CASE CODE
STYLE
LENGTH
(L)
WIDTH
(W)
TERMINATION
(P)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
0402
VJ0402
0.040 + 0.004 / - 0.002
(1.00 + 0.10 / - 0.05)
0.020 + 0.004 / - 0.002
(0.50 + 0.10 / - 0.05)
0.024
(0.60)
0.004
(0.10)
0.016
(0.41)
0603
VJ0603
0.063 ± 0.006
(1.60 ± 0.15)
0.031 ± 0.006
(0.80 ± 0.15)
0.038
(0.97)
0.012
(0.30)
0.018
(0.46)
0805
VJ0805
0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20)
0.057
(1.45)
0.010
(0.25)
0.028
(0.71)
1206
VJ1206
0.126 ± 0.010
(3.20 ± 0.25)
0.063 ± 0.010
(1.60 ± 0.25)
0.067
(1.70)
0.010
(0.25)
0.028
(0.71)
1210
VJ1210
0.126 ± 0.010
(3.20 ± 0.25)
0.098 ± 0.010
(2.50 ± 0.25)
0.067
(1.70)
0.010
(0.25)
0.028
(0.71)
1808
VJ1808
0.180 ± 0.012
(4.57 ± 0.30)
0.080 ± 0.010
(2.03 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
1812
VJ1812
0.177 ± 0.012
(4.50 ± 0.30)
0.126 ± 0.008
(3.20 ± 0.20)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
1825
VJ1825
0.177 ± 0.012
(4.50 ± 0.30)
0.252 ± 0.010
(6.40 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
2220
VJ2220
0.220 ± 0.010
(5.59 ± 0.25)
0.200 ± 0.010
(5.08 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
2225
VJ2225
0.220 ± 0.010
(5.59 ± 0.25)
0.250 ± 0.010
(6.35 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
3640
VJ3640
0.360 ± 0.015
(9.14 ± 0.38)
0.400 ± 0.015
(10.20 ± 0.38)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
Note
• Polymer (B-termination) have increased dimensions:
length 0.006"(0.15 mm)
Revision: 09-Sep-14
Document Number: 45199
8
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
STYLE
VJ0402
VJ0603
VJ0805
VJ1206 (1)
CASE CODE
0402
0603
0805
1206
VOLTAGE (VDC)
25 50 100 50 100 200 50 100 200 500 50 100 200 500
VOLTAGE CODE
X
A
B
A
B
C
A
B
C
E
A
B
C
E
CAP. CODE CAP.
1R0
1.0 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
•• •• ••
••
••
••
••
••
••
••
••
1R2
1.2 pF •• •• ••
1R5
1.5 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
•• •• ••
••
••
••
••
••
••
••
••
1R8
1.8 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
2R2
2.2 pF •• •• ••
2R7
2.7 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
•• •• ••
••
••
••
••
••
••
••
••
3R3
3.3 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
3R9
3.9 pF •• •• ••
4R7
4.7 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
•• •• ••
••
••
••
••
••
••
••
••
5R6
5.6 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
6R8
6.8 pF •• •• ••
8R2
8.2 pF •• •• ••
•• •• ••
••
••
••
••
••
••
••
••
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
100
10 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
120
12 pF
150
15 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
180
18 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
220
22 pF
270
27 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
330
33 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
390
39 pF
470
47 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
560
56 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
680
68 pF
820
82 pF
•• •• ••
•• •• ••
••
••
••
••
••
••
••
••
•• •• ••
••
••
••
••
•
•
•
•
101
100 pF •• •• ••
•• •• ••
••
••
••
••
•
•
•
•
121
120 pF •• •• ••
151
150 pF •• ••
•• •• ••
••
••
••
••
•
•
•
•
•• ••
•
••
••
••
••
•
•
•
•
181
180 pF •• ••
•• ••
•
••
••
••
•
•
•
•
•
221
220 pF •• ••
271
270 pF
•• ••
•
••
••
••
•
•
•
•
•
•• ••
••
••
••
•
•
•
•
•
331
330 pF
•• ••
••
••
••
•
•
•
•
•
391
390 pF
471
470 pF
••
••
••
•
•
•
•
•
•
••
••
••
•
•
•
•
•
561
560 pF
••
••
••
•
•
•
•
•
681
680 pF
821
820 pF
••
••
••
•
•
•
•
•
••
••
••
•
•
•
•
•
102
1.0 nF
••
•
•
•
•
122
1.2 nF
152
1.5 nF
••
•
•
•
•
•
•
•
•
182
1.8 nF
•
•
•
•
222
2.2 nF
272
2.7 nF
•
•
•
•
•
•
•
•
332
3.3 nF
•
•
•
392
3.9 nF
472
4.7 nF
•
•
•
•
•
562
5.6 nF
•
•
682
6.8 nF
822
8.2 nF
•
•
•
•
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
Notes
RoHS-compliant
•• Paper tape • Plastic tape
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
Revision: 09-Sep-14
630
L
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
•
•
•
•
•
•
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210 (1)
1210
100 200 500 630
B
C
E
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45199
9
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
VJ1812 (1)
STYLE
VJ1808 (1)
CASE CODE
1808
1812
50
100
200
500
1000
50
100
200
500
VOLTAGE (VDC)
VOLTAGE CODE
A
B
C
E
G
A
B
C
E
CAP. CODE
CAP.
1R0
1.0 pF
1R2
1.2 pF
1R5
1.5 pF
1R8
1.8 pF
2R2
2.2 pF
2R7
2.7 pF
3R3
3.3 pF
3R9
3.9 pF
4R7
4.7 pF
5R6
5.6 pF
6R8
6.8 pF
8R2
8.2 pF
100
10 pF
120
12 pF
150
15 pF
•
180
18 pF
•
•
220
22 pF
•
•
270
27 pF
330
33 pF
•
•
•
•
•
•
•
•
390
39 pF
•
•
•
•
•
•
470
47 pF
560
56 pF
•
•
•
•
•
•
•
•
•
•
•
•
680
68 pF
•
•
•
•
•
•
820
82 pF
101
100 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
121
120 pF
•
•
•
•
•
•
•
151
150 pF
181
180 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
221
220 pF
•
•
•
•
•
•
•
•
•
271
270 pF
331
330 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
391
390 pF
•
•
•
•
•
•
•
•
•
471
470 pF
561
560 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
•
•
•
821
820 pF
102
1.0 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
•
•
•
152
1.5 nF
182
1.8 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
•
•
272
2.7 nF
332
3.3 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
472
4.7 nF
562
5.6 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
•
822
8.2 nF
•
•
•
•
•
103
10 nF
123
12 nF
•
•
•
•
•
153
15 nF
•
183
18 nF
223
22 nF
•
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
Notes
RoHS-compliant
• Plastic tape
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
Revision: 09-Sep-14
1000
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1825 (1)
1825
100
200
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45199
10
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
STYLE
VJ2220 (1)
CASE CODE
2220
50
100
200
500
630
1000
50
VOLTAGE (VDC)
VOLTAGE CODE
A
B
C
E
L
G
A
CAP. CODE
CAP.
1R0
1.0 pF
1R2
1.2 pF
1R5
1.5 pF
1R8
1.8 pF
2R2
2.2 pF
2R7
2.7 pF
3R3
3.3 pF
3R9
3.9 pF
4R7
4.7 pF
5R6
5.6 pF
6R8
6.8 pF
8R2
8.2 pF
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
•
•
•
•
•
•
271
270 pF
331
330 pF
•
•
•
•
•
•
•
•
•
•
•
•
391
390 pF
•
•
•
•
•
•
471
470 pF
561
560 pF
•
•
•
•
•
•
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
821
820 pF
102
1.0 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
•
•
152
1.5 nF
182
1.8 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
•
•
272
2.7 nF
332
3.3 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
472
4.7 nF
562
5.6 nF
•
•
•
•
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
822
8.2 nF
•
•
•
•
103
10 nF
123
12 nF
•
•
•
•
•
•
•
•
153
15 nF
•
•
•
183
18 nF
223
22 nF
•
•
•
•
•
•
273
27 nF
•
•
•
333
33 nF
393
39 nF
•
•
•
•
473
47 nF
•
563
56 nF
Notes
RoHS-compliant
• Plastic tape
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
Revision: 09-Sep-14
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ2225 (1)
2225
200
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1000
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45199
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
683
68 nF
823
82 nF
104
100 nF
124
120 nF
154
150 nF
184
180 nF
224
220 nF
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
Notes
RoHS-compliant
•• Paper tape • Plastic tape
Revision: 09-Sep-14
16
J
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
VJ0402
0402
25
50
X
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
100
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
16
J
25
X
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
X7R
VJ0603
0603
50
100
A
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
200
C
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
16
J
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
25
X
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
VJ0805
0805
50
100
A
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
200
C
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
250
P
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
Document Number: 45199
12
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ1206 (1)
CASE CODE
1206
16
25
50
100 200 250 500 630
16
25
VOLTAGE (VDC)
VOLTAGE CODE
J
X
A
B
C
P
E
L
J
X
CAP. CODE
CAP.
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
••
••
331
330 pF
••
••
391
390 pF
471
470 pF
••
••
••
••
••
••
••
••
••
••
••
••
561
560 pF
••
••
••
••
••
••
681
680 pF
821
820 pF
••
••
••
••
••
••
••
••
••
••
••
••
••
102
1.0 nF
••
••
••
••
••
••
••
122
1.2 nF
152
1.5 nF
••
••
••
••
••
••
••
••
••
••
••
••
••
••
182
1.8 nF
••
••
••
••
••
••
••
222
2.2 nF
272
2.7 nF
••
••
••
••
••
••
••
••
••
••
••
••
••
••
332
3.3 nF
••
••
••
••
••
••
••
392
3.9 nF
472
4.7 nF
••
••
••
••
••
••
••
••
••
••
••
••
•
•
562
5.6 nF
••
••
••
••
••
•
•
682
6.8 nF
822
8.2 nF
••
••
••
••
••
•
•
••
••
••
••
••
•
•
•
•
•
103
10 nF
••
••
••
••
••
•
•
•
•
•
123
12 nF
153
15 nF
••
••
••
••
••
•
•
•
•
•
••
••
••
••
••
•
•
•
•
•
183
18 nF
••
••
••
••
••
•
•
•
223
22 nF
273
27 nF
••
••
••
••
••
•
•
•
••
••
••
••
••
•
•
•
333
33 nF
••
••
••
••
•
•
•
•
393
39 nF
473
47 nF
••
••
••
••
•
•
•
•
••
••
••
••
•
•
•
•
563
56 nF
••
••
••
••
•
•
•
•
683
68 nF
823
82 nF
••
••
•
•
•
•
•
•
••
••
•
•
•
•
•
•
104
100 nF
••
••
•
•
•
•
124
120 nF
154
150 nF
••
••
•
•
•
•
••
••
•
•
•
•
184
180 nF
•
•
•
•
•
•
224
220 nF
274
270 nF
•
•
•
•
•
•
•
•
•
•
•
334
330 nF
•
•
•
•
•
394
390 nF
474
470 nF
•
•
•
•
•
•
•
•
•
564
560 nF
•
•
•
•
684
680 nF
824
820 nF
•
•
•
•
•
•
•
•
105
1.0 μF
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
Notes
RoHS-compliant
•• Paper tape • Plastic tape
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
Revision: 09-Sep-14
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210 (1)
1210
100 200
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
250
P
•
•
•
•
•
•
•
500
E
630
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45199
13
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ1808 (1)
VJ1812 (1)
CASE CODE
1808
1812
VOLTAGE (VDC)
50 100 200 500 1000 25 50 100 200 250 500 630 1000
VOLTAGE CODE
A
B
C
E
G
X
A
B
C
P
E
L
G
CAP. CODE CAP.
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
•
471
470 pF
•
561
560 pF
•
681
680 pF
821
820 pF
•
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
122
1.2 nF
152
1.5 nF
•
•
•
•
•
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
222
2.2 nF
272
2.7 nF
•
•
•
•
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
392
3.9 nF
472
4.7 nF
•
•
•
•
•
•
•
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
•
682
6.8 nF
822
8.2 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
103
10 nF
•
•
•
•
•
•
•
•
123
12 nF
153
15 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
183
18 nF
•
•
•
•
•
•
•
•
•
•
•
223
22 nF
273
27 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
333
33 nF
•
•
•
•
•
•
•
•
•
393
39 nF
473
47 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
563
56 nF
•
•
•
•
•
•
•
•
•
683
68 nF
823
82 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
104
100 nF •
•
•
•
•
•
•
124
120 nF •
154
150 nF •
•
•
•
•
•
•
•
•
•
•
•
•
184
180 nF •
•
•
•
•
•
224
220 nF •
274
270 nF •
•
•
•
•
•
•
•
•
•
•
334
330 nF
•
•
•
•
394
390 nF
474
470 nF
•
•
•
•
•
•
•
564
560 nF
•
•
•
684
680 nF
824
820 nF
•
•
•
•
•
105
1.0 μF
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
Notes
RoHS-compliant
• Plastic tape
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
Revision: 09-Sep-14
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1825 (1)
1825
100 200 250 500
B
C
P
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1000
G
•
•
•
•
•
•
•
•
•
•
Document Number: 45199
14
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ2220 (1)
VJ2225 (1)
CASE CODE
2220
2225
VOLTAGE (VDC)
50
100
200
500
25
50
100
200
500
VOLTAGE CODE
A
B
C
E
X
A
B
C
E
CAP. CODE
CAP.
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
•
153
15 nF
183
18 nF
•
•
223
22 nF
•
273
27 nF
333
33 nF
•
•
•
•
•
•
•
•
•
•
•
•
393
39 nF
•
•
•
•
•
•
473
47 nF
563
56 nF
•
•
•
•
•
•
•
•
•
•
•
•
683
68 nF
•
•
•
•
•
•
823
82 nF
104
100 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
124
120 nF
•
•
•
•
•
•
•
154
150 nF
184
180 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
224
220 nF
•
•
•
•
•
•
•
•
274
270 nF
334
330 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
394
390 nF
•
•
•
•
•
•
•
474
470 nF
564
560 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
684
680 nF
•
•
•
•
•
•
•
824
820 nF
105
1.0 μF
•
•
•
•
•
•
•
•
•
•
•
•
•
125
1.2 μF
155
1.5 μF
•
•
•
•
•
•
•
•
185
1.8 μF
•
•
•
225
2.2 μF
275
2.7 μF
•
•
•
335
3.3 μF
•
395
3.9 μF
475
4.7 μF
•
565
5.6 μF
685
6.8 μF
Notes
RoHS-compliant
• Plastic tape
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
Revision: 09-Sep-14
1000
G
25
X
VJ3640 (1)
3640
50
100
200
A
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45199
15
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
INSULATION RESISTANCE VS. TEMPERATURE
10 000
1.5
INSULATION RESISTANCE
(ΩF)
% CAPACITANCE CHANGE
TEMPERATURE COEFFICIENT OF CAPACITANCE
2.0
1.0
1000
0.5
0.0
- 0.5
NP0
100
- 1.0
- 1.5
- 2.0
10
- 75 - 50 - 25
10
0 25 50 75 100 125 150 175
TEMPERATURE °C
150
0.2
% CAPACITANCE CHANGE
0.1
0.0
- 0.1
0.1
0.0
- 0.1
- 0.2
- 0.2
1
10
100
HOURS
1000
10 000
0
10
CHANGE OF CAPACITANCE WITH FREQUENCY
40
50
60
70
DC VOLTS APPLIED
80
90
100
DISSIPATION FACTOR VS. FREQUENCY
0.0005
0
-1
-2
Revision: 09-Sep-14
30
DISSIPATION FACTOR
1
1 kHz
20
0.001
2
% CAPACITANCE CHANGE
100
50
TEMPERATURE °C
VOLTAGE COEFFICIENT OF CAPACITANCE
AGING RATE
0.2
% CAPACITANCE CHANGE
25
10 kHz
100 kHz
FREQUENCY
1 MHz
0.00025
1 kHz
10 kHz
100 kHz
FREQUENCY
1 MHz
Document Number: 45199
16
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
X7R DIELECTRIC - TYPICAL PARAMETERS
INSULATION RESISTANCE VS. TEMPERATURE
TEMPERATURE COEFFICIENT OF CAPACITANCE
10 000
INSULATION RESISTANCE
(ΩF)
% CAPACITANCE CHANGE
15
10
5
0
1000
-5
- 10
- 15
- 20
- 25
100
10
- 30
- 75 - 50 - 25 0 20 50 75 100 125 150 175
TEMPERATURE °C
10
AGING RATE
DISSIPATION FACTOR VS. TEMPERATURE
1.0
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
% CAPACITANCE CHANGE
% DISSIPATION FACTOR
150
25
100
TEMPERATURE °C
0.0
- 1.0
- 2.0
- 3.0
- 4.0
- 75 - 50 - 25 0 25 50 75 100 125 150 175
TEMPERATURE °C
1
RATED VOLTAGE VS. TEMPERATURE
10
100
HOURS
1000
10 000
VOLTAGE COEFFICIENT OF CAPACITANCE
% CAPACITANCE CHANGE
5
% RATED VOLTAGE
200
150
100
50
0
-5
- 10
25 V
RATED
- 15
- 20
50 V
RATED
- 25
- 30
0
0
- 75 - 50 - 25 0 20 50 75 100 125 150 175 180
TEMPERATURE °C
DISSIPATION FACTOR VS. VOLTAGE
10 20
30 40 50 60 70 80
DC VOLTS APPLIED
90 100
DISSIPATION FACTOR VS. VOLTAGE
0.020
0.016
0.012
50 V
0.008
100 V
0.004
0
10 20 30 40 50 60 70 80 90 100
DC VOLTS APPLIED
Revision: 09-Sep-14
DISSIPATION FACTOR
0.020
DISSIPATION FACTOR
100 V
RATED
0.016
0.012
0.008
200 V
0.000
0
100
500 V/630 V
200 300 400 500
DC VOLTS APPLIED
600
700
Document Number: 45199
17
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Commercial Series
www.vishay.com
Vishay Vitramon
STANDARD PACKAGING QUANTITIES
(1)(2)(3)
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
CASE CODE
TAPE SIZE
PAPER TAPE
PACKAGING CODE
“C” / “O”
PLASTIC TAPE
PACKAGING CODE
“T”
PAPER TAPE
PACKAGING CODE
“P” / “I”
PLASTIC TAPE
PACKAGING CODE
“R”
0402
8 mm
5000
n/a
10 000
n/a
0603
(4)
8 mm
4000
4000
10 000
10 000
0805
(4)
8 mm
3000
3000
10 000
10 000
1206
(4)
8 mm
3000
2500 / 3000
10 000
9000 / 10 000
1210 (4)
8 mm
n/a
2000 / 2500 / 3000
n/a
9000 / 10 000
1808
12 mm
n/a
2000
n/a
10 000
1812
12 mm
n/a
1000
n/a
4000
1825
12 mm
n/a
1000
n/a
4000
2220
12 mm
n/a
1000
n/a
4000
2225
12 mm
n/a
1000
n/a
4000
3640
16 mm
n/a
500
n/a
n/a
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape
(2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(3) n/a = not available
(4) Packaging “C” / “P” / “O” / “I” and “T” / “R” or lower quantities can depend from product thickness
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 09-Sep-14
Document Number: 45199
18
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
VJ X8R ................................... 20
MLCCs
for
High Temperature
Applications
(NME Technology)
VJ X8R
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for High Temperature Applications
FEATURES
• Specialty: high temperature applications
• High operating temperature dielectric,
up to +150 °C
• Maintains capacitance at high temperature for
frequency stability
• Wet build process
Available
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• High temperature modules
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified.
Operating Temperature: -55 °C to +150 °C
Aging Rate: 1 % maximum per decade
Capacitance Range: 330 pF to 220 nF
Insulation Resistance (IR):
at +25 °C and rated voltage 100 000 M minimum or
1000 F, whichever is less
at +125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less
Voltage Range: 25 VDC to 100 VDC
Temperature Coefficient of Capacitance (TCC):
± 15 % from -55 °C to +150 °C
Dissipation Factor (DF):
25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
> 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Revision: 26-Aug-14
Dielectric Strength Test:
performed per method 103 of EIA-198-2-E
Applied test voltage:
 100 VDC-rated: 250 % of rated voltage
Document Number: 45006
20
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ X8R
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
CASE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
0402
100
330 pF
6.8 nF
0603
100
470 pF
33 nF
0805
100
470 pF
100 nF
1206
50
1.0 nF
220 nF
1210
50
10 nF
220 nF
X8R
Note
• Detail ratings see “Selection Chart”
ORDERING INFORMATION
VJ0805
H
102
K
X
A
CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE
CODE
NOMINAL
TOLERANCE
RATING (1)
CODE
0402
0603
0805
1206
1210
H = X8R
J=±5%
K = ± 10 %
M = ± 20 %
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Examples:
102 = 1000 pF
X = Ni barrier
100 % tin plated
F, E = AgPd (3)(5)
X = 25 V
A = 50 V
B = 100 V
A
MARKING
(4)
C
### (2)
PACKAGING
PROCESS
CODE
A = unmarked
M = marked
Note
Marking is only
available for
0805 and 1206
with termination
code “X”
T = 7" reel / plastic tape
C = 7" reel / paper tape
R = 11 1/4" / 13" reel / plastic tape
P = 11 1/4" / 13" reel / paper tape
O = 7" reel / flamed paper tape
I = 11 1/4" / 13" reel / flamed paper tape
Note
“I” and “O” are used for
“F” termination size 0603 / 0805 and
“E” termination size 0402 / 0603 / 0805
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
(2) Process code may be added with up to three digits, used to control non-standard products and requirements.
(3) Termination code “E” for conductive epoxy assembly.
(4) Marking in reference to EIA198, see www.vishay.com/doc?45028
(5) Termination code “F” not available for 0402, 0603 - 100 V, 0805 - 100 V.
ENVIRONMENTAL STATUS
TERMINATION CODE
TERMINATION DESCRIPTION
RoHS COMPLIANT
VISHAY GREEN
X
Ni barrier 100 % tin plated matte finish
Yes
Yes
E
AgPd
Yes
Yes
F
AgPd
Yes
No
Revision: 26-Aug-14
Document Number: 45006
21
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ X8R
www.vishay.com
Vishay Vitramon
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
CASE
CODE
STYLE
LENGTH
(L)
WIDTH
(W)
MAXIMUM THICKNESS
(T)
TERMINATION
(P)
MINIMUM
MAXIMUM
0402
VJ0402
0.040 + 0.004/- 0.002
(1.00 + 0.10/- 0.05)
0.020 + 0.004/- 0.002
(0.50 + 0.10/- 0.05)
0.024
(0.60)
0.004
(0.10)
0.016
(0.41)
0603
VJ0603
0.063 ± 0.006
(1.60 ± 0.15)
0.031 ± 0.006
(0.80 ± 0.15)
0.036
(0.92)
0.012
(0.30)
0.018
(0.46)
0805
VJ0805
0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20)
0.057
(1.45)
0.010
(0.25)
0.028
(0.71)
1206
VJ1206
0.126 ± 0.010
(3.20 ± 0.25)
0.063 ± 0.010
(1.60 ± 0.25)
0.067
(1.70)
0.010
(0.25)
0.028
(0.71)
1210
VJ1210
0.126 ± 0.010
(3.20 ± 0.25)
0.098 ± 0.010
(2.50 ± 0.25)
0.067
(1.70)
0.010
(0.25)
0.028
(0.71)
Revision: 26-Aug-14
Document Number: 45006
22
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ X8R
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
X8R
25
X
CAP.
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
27 nF
33 nF
39 nF
47 nF
56 nF
68 nF
82 nF
100 nF
120 nF
150 nF
180 nF
220 nF
270 nF
330 nF
390 nF
VJ0402
0402
50
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
100
B
••
••
••
••
••
••
••
••
25
X
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
VJ0603
0603
50
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
100
B
25
X
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
VJ0805
0805
50
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
100
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
VJ1206 (1)
1206
25
50
X
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210 (1)
1210
25
50
X
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
• Plastic tape, •• Paper tape
RoHS-compliant
X8R PACKAGING QUANTITIES
CASE CODE
TAPE SIZE
0402
0603
0805 (2)
1206 (2)
1210 (2)
8 mm
8 mm
8 mm
8 mm
8 mm
(1)
7" REEL QUANTITIES
PACKAGING CODE
“C” / “O”
“T”
5000
n/a
4000
n/a
3000
3000
n/a
2500 / 3000
n/a
2000 / 2500 / 3000
11 1/4" AND 13" REEL QUANTITIES
PACKAGING CODE
“P” / “I”
“R”
10 000
n/a
10 000
n/a
10 000
10 000
10 000
9000 / 10 000
10 000
9000 / 10 000
Notes
(1) Reference: EIA standard RS481 - “Taping of Surface Mount Components for Automatic Placement”
(2) Packaging “C” / “P” / “O” / “I” and “T” / “R” or lower quantities can depend from product thickness
Revision: 26-Aug-14
Document Number: 45006
23
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ X8R
www.vishay.com
Vishay Vitramon
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
X8R DIELECTRIC - TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
AGING RATE
1.0
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
15
10
5
0
-5
- 10
- 15
0.0
- 1.0
- 2.0
- 3.0
- 4.0
- 20
- 75 - 50 - 25
0
25
50
75 100 125 150 175
1
10
100
HOURS
TEMPERATURE °C
1000
10 000
DISSIPATION FACTOR VS. TEMPERATURE
DISSIPATION FACTOR VS. VOLTAGE
5.0
0.025
% DISSIPATION FACTOR
DISSIPATION FACTOR
4.5
0.023
0.021
0.019
0.017
0.015
4.0
3.5
3.0
2.5
1.5
1.0
0.5
0.0
0.013
0
10
20
30
DC VOLTS APPLIED
40
- 75 - 50 - 25
50
0
25
50 75 100 125 150 175
TEMPERATURE °C
VOLTAGE COEFFICIENT OF CAPACITANCE
INSULATION RESISTANCE VS. TEMPERATURE
10 000
INSULATION RESISTANCE
(ΩF)
0.0
CAPACITANCE CHANGE IN %
X8R
2.0
- 5.0
1000
- 10.0
- 15.0
- 20.0
100
10
- 25.0
0
Revision: 26-Aug-14
10
20
30
DC VOLTS APPLIED
40
50
10
25
100
TEMPERATURE °C
150
Document Number: 45006
24
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
VJ....31X RoHS
Automotive MLCCs................ 26
VJ....31 / VJ....34
Automotive MLCCs................ 45
MLCCs
for
Automotive
Applications
(NME Technology)
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
FEATURES
• AEC-Q200 qualified with PPAP available
• Available in 0402 to 1812 body size
• High operating temperature
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Parts compliant with ELV directive
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
For more than 25 years Vishay Vitramon has supported the automotive industry with robust, highly reliable MLCCs that have
made it a leader in this segment. All Vishay Vitramon MLCCs are manufactured in “Precious Metal Technology” (PMT / NME)
and a wet build process. They are qualified according to AEC-Q200 with PPAP available on request. Applications for these
devices include automotive “under the hood”, safety and comfort electronics. Their termination finish is 100 % matte tin plate
finish. A polymer (flexible) termination with 100 % matte tin plate finish is offered for boardflex sensitive applications.
C0G (NP0) DIELECTRIC
X7R, X8R DIELECTRIC
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +150 °C
(above +125 °C changed characteristics, see 2.2)
Operating Temperature: -55 °C to +150 °C
(X7R above +125 °C changed characteristics, see 2.2)
Capacitance Range: 1 pF to 22 nF
Capacitance Range: 120 pF to 1.0 μF
Voltage Range: 25 VDC to 3000 VDC
Voltage Range: 16 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Temperature Coefficient of Capacitance (TCC):
X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied
X8R: ± 15 % from -55 °C to +150 °C, with 0 VDC applied
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values  1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Dissipation Factor (DF):
16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
> 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Aging: 0 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
 250 VDC-rated:
250 % of rated voltage
500 VDC-rated:
200 % of rated voltage
630 VDC, 1000 VDC-rated:
150 % of rated voltage
3000 VDC-rated:
120 % of rated voltage
Revision: 06-Nov-14
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
 250 VDC-rated:
250 % of rated voltage
500 VDC-rated:
min. 150 % of rated voltage
630 VDC, 1000 VDC-rated: min. 120 % of rated voltage
Document Number: 45226
26
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE CODE
MAXIMUM VOLTAGE
(V)
CAPACITANCE
MINIMUM
MAXIMUM
0402
100
1.0 pF
220 pF
0603
200
1.0 pF
1.0 nF
0805
500
1.0 pF
3.9 nF
1206
630
1.0 pF
10 nF
1210
630
100 pF
12 nF
1812
3000
12 pF
22 nF
0402
100
120 pF
47 nF
0603
200
330 pF
150 nF
0805
250
330 pF
470 nF
1206
1000
220 pF
1.0 μF
1210
630
390 pF
1.0 μF
1812
630
10 nF
1.0 μF
0402
100
330 pF
6.8 nF
0603
100
470 pF
33 nF
0805
100
470 pF
100 nF
1206
50
1.0 nF
220 nF
1210
50
10 nF
220 nF
C0G (NP0)
X7R
X8R
Note
• Detail ratings see “Selection Chart”
Revision: 06-Nov-14
Document Number: 45226
27
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
ORDERING INFORMATION - TIN TERMINATION
VJ0805
CASE
CODE
0402
0603
0805
1206
1210
1812
Y
102
K
DIELECTRIC CAPACITANCE
NOMINAL
CODE
A = C0G
(NP0)
Y = X7R
H = X8R
X
CAPACITANCE
TOLERANCE
A
TERMINATION DC VOLTAGE
RATING (1)
Expressed in
B = ± 0.10 pF
X = Ni barrier
picofarads (pF).
100 % matte tin
C = ± 0.25 pF
The first two
D = ± 0.5 pF
plate finish
digits are
F=±1%
B = polymer
significant, the
G=±2%
100 % matte tin
third is a
J=±5%
plate finish (2)
multiplier. An
K = ± 10 %
“R” indicates a
M = ± 20 %
decimal point.
Note
Examples
C0G (NP0):
4R7 = 4.7 pF
B, C, D < 10 pF
102 = 1000 pF F, G, J, K 10 pF
X7R / X8R:
J, K, M
J = 16 V
X = 25 V
A = 50 V
B = 100 V
C = 200 V
P = 250 V
E = 500 V
L = 630 V
G = 1000 V
H = 3000 V
B
C
31X
MARKING (3)
PACKAGING
PROCESS
CODE
A = unmarked
B = marked
Note
Marking for
0805 and 1206
vendor ID and
date code
31X =
Automotive
MLCC
RoHS
conform
T = 7" reel / plastic tape
C = 7" reel / paper tape
R = 11 1/4" / 13" reel / plastic tape
P = 11 1/4" / 13" reel / paper tape
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
(2) Polymer termination contact [email protected] for availability of ratings
(3) No marking on 1206 size - 1000 V
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
TERMINATIONS PAD
(P)
STYLE
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
0402
VJ0402
0.040 + 0.004 / - 0.002
(1.00 + 0.10 / - 0.05)
0.020 + 0.004 / - 0.002
(0.50 + 0.10 / - 0.05)
0.024
(0.60)
0.004
(0.10)
0.016
(0.41)
0603
VJ0603
0.063 ± 0.006
(1.60 ± 0.15)
0.031 ± 0.006
(0.80 ± 0.15)
0.038
(0.97)
0.012
(0.30)
0.018
(0.46)
0805
VJ0805
0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20)
0.057
(1.45)
0.010
(0.25)
0.028
(0.71)
1206
VJ1206
0.126 ± 0.010
(3.20 ± 0.25)
0.063 ± 0.010
(1.60 ± 0.25)
0.067
(1.70)
0.010
(0.25)
0.028
(0.71)
1210
VJ1210
0.126 ± 0.010
(3.20 ± 0.25)
0.098 ± 0.010
(2.50 ± 0.25)
0.076
(1.94)
0.010
(0.25)
0.028
(0.71)
1812
VJ1812
0.177 ± 0.010
(4.50 ± 0.25)
0.126 ± 0.010
(3.20 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
CASE
CODE
Note
• Polymer (B-termination) have increased dimensions:
part length increased by 0.006" (0.15 mm)
Revision: 06-Nov-14
Document Number: 45226
28
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
1R0
1.0 pF
1R2
1.2 pF
1R5
1.5 pF
1R8
1.8 pF
2R2
2.2 pF
2R7
2.7 pF
3R3
3.3 pF
3R9
3.9 pF
4R7
4.7 pF
5R6
5.6 pF
6R8
6.8 pF
8R2
8.2 pF
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
25
X
VJ0402
0402
50
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
100
B
50
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
C0G (NP0)
VJ0603
0603
100
200
B
C
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
50
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
VJ0805
0805
100
200
B
C
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
500
E
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
Note
•• Paper tape, • Plastic tape
Revision: 06-Nov-14
Document Number: 45226
29
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
STYLE
VJ1206
VJ1210 (1)
CASE CODE
1206
1210
VOLTAGE (VDC)
50 100 200 250 500 630 50 100 200 500 630
VOLTAGE CODE
A
B
C
P
E
L
A
B
C
E
L
CAP. CODE
CAP.
1R0
1.0 pF
•• ••
••
••
••
1R2
1.2 pF
•• ••
••
••
••
1R5
1.5 pF
•• ••
••
••
••
1R8
1.8 pF
•• ••
••
••
••
2R2
2.2 pF
•• ••
••
••
••
2R7
2.7 pF
•• ••
••
••
••
3R3
3.3 pF
•• ••
••
••
••
3R9
3.9 pF
•• ••
••
••
••
4R7
4.7 pF
•• ••
••
••
••
5R6
5.6 pF
•• ••
••
••
••
6R8
6.8 pF
•• ••
••
••
••
8R2
8.2 pF
•• ••
••
••
••
100
10 pF
•• ••
••
••
••
120
12 pF
•• ••
••
••
••
150
15 pF
•• ••
••
••
••
180
18 pF
•• ••
••
••
••
220
22 pF
•• ••
••
••
••
270
27 pF
•• ••
••
••
••
330
33 pF
•• ••
••
••
••
390
39 pF
•• ••
••
••
••
470
47 pF
•• ••
••
••
••
560
56 pF
•• ••
••
••
••
680
68 pF
•• ••
••
••
••
820
82 pF
•• ••
••
••
••
101
100 pF
•
•
•
•
•
•
•
•
•
•
121
120 pF
•
•
•
•
•
•
•
•
•
•
151
150 pF
•
•
•
•
•
•
•
•
•
•
181
180 pF
•
•
•
•
•
•
•
•
•
•
221
220 pF
•
•
•
•
•
•
•
•
•
•
271
270 pF
•
•
•
•
•
•
•
•
•
•
331
330 pF
•
•
•
•
•
•
•
•
•
•
391
390 pF
•
•
•
•
•
•
•
•
•
•
471
470 pF
•
•
•
•
•
•
•
•
•
•
561
560 pF
•
•
•
•
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
822
8.2 nF
•
•
•
•
•
103
10 nF
•
•
•
•
123
12 nF
•
•
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
Notes
•• Paper tape, • Plastic tape
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
Revision: 06-Nov-14
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1812 (1)
1812
200 500 630
C
E
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1000
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3000
H
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45226
30
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
683
68 nF
823
82 nF
104
100 nF
124
120 nF
154
150 nF
184
180 nF
224
220 nF
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
16
J
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
VJ0402
0402
25
50
X
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
100
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
16
J
25
X
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
X7R
VJ0603
0603
50
100
A
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
200
C
16
J
25
X
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
•
•
•
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
•
•
VJ0805
0805
50
100
A
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
200
C
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
250
P
••
Note
•• Paper tape, • Plastic tape
Revision: 06-Nov-14
Document Number: 45226
31
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
683
68 nF
823
82 nF
104
100 nF
124
120 nF
154
150 nF
184
180 nF
224
220 nF
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
X7R
16 25 50
J X A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1206
1206
100 200 500
B
C
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
630
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1000
G
VJ1210 (1)
1210
16 25 50 100 200
J X A
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
630
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1812 (1)
1812
100 200 500
B
C
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
630
L
•
•
•
•
•
•
•
•
•
•
•
•
Notes
• Plastic tape
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
Revision: 06-Nov-14
Document Number: 45226
32
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X8R
STYLE
VJ0402
VJ0603
VJ0805
CASE CODE
0402
0603
0805
25
50
100
25
50
100
25
50
VOLTAGE (VDC)
VOLTAGE CODE
X
A
B
X
A
B
X
A
CAP. CODE
CAP.
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
••
••
••
391
390 pF
••
••
••
471
470 pF
••
••
••
••
••
••
••
561
560 pF
••
••
••
••
••
••
••
681
680 pF
••
••
••
••
••
••
••
••
821
820 pF
••
••
••
••
••
••
••
••
102
1.0 nF
••
••
••
••
••
••
••
••
122
1.2 nF
••
••
••
••
••
••
••
••
152
1.5 nF
••
••
••
••
••
••
••
182
1.8 nF
••
••
••
••
••
••
••
222
2.2 nF
••
••
••
••
••
••
••
272
2.7 nF
••
••
••
••
••
••
332
3.3 nF
••
••
••
••
••
••
392
3.9 nF
••
••
••
••
••
••
472
4.7 nF
••
••
••
••
••
••
562
5.6 nF
••
••
••
••
••
682
6.8 nF
••
••
••
••
••
822
8.2 nF
••
••
••
••
103
10 nF
••
••
••
••
123
12 nF
••
••
••
••
153
15 nF
••
••
••
••
183
18 nF
••
••
••
••
223
22 nF
••
••
••
273
27 nF
••
••
•
333
33 nF
••
••
•
393
39 nF
••
•
473
47 nF
•
•
563
56 nF
•
•
683
68 nF
•
823
82 nF
•
104
100 nF
•
124
120 nF
154
150 nF
184
180 nF
224
220 nF
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
125
1.2 μF
Notes
•• Paper tape, • Plastic tape
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
Revision: 06-Nov-14
100
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
VJ1206
1206
25
50
X
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210 (1)
1210
25
50
X
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45226
33
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
STANDARD PACKAGING QUANTITIES (1)(2)
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
CASE CODE
TAPE SIZE
PAPER TAPE
PACKAGING CODE
“C”
PLASTIC TAPE
PACKAGING CODE
“T”
PAPER TAPE
PACKAGING CODE
“P”
PLASTIC TAPE
PACKAGING CODE
“R”
0402
8 mm
5000 / 10 000 (3)
n/a
10 000 / 30 000 (3)
n/a
0603
8 mm
4000
4000
10 000
10 000
0805 (4)
8 mm
3000
3000
10 000
10 000
1206 (4)
8 mm
3000
2500 / 3000
10 000
10 000
1210 (4)
8 mm
n/a
2000 / 2500 / 3000
n/a
9000 / 10 000
1812
12 mm
n/a
1000
n/a
4000
Notes
(1) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(2) n/a = not available
(3) Quantity can vary with customer request
(4) Packaging “C / P” or “T / R” and quantity can depend from product thickness
Revision: 06-Nov-14
Document Number: 45226
34
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
1 - GENERAL CERTIFICATES
# Quality management system according to ISO/TS 16949: 2009
Yes
# Quality management system according to ISO 9001: 2008
Yes
# Environmental certification according to ISO 14001: 2004
Yes
# Health and safety system according to OHSA 18001
Yes
2 - TECHNICAL REQUIREMENTS
Unless specified in component specification, these parameters are the minimum requirements for the components.
2.1 OPERATING TEMPERATURE RANGE
For standard applications
TA: -55 °C to +125 °C
See characteristics 2.2
For high temperature applications
TA: -55 °C to +150 °C
See characteristics 2.2
For ultra high temperature applications
TA: -55 °C to +175 °C
See characteristics 2.2
2.2 CHARACTERISTICS
PARAMETER
Rated voltage in temperature range -55 °C to +125 °C
CERAMIC
TYPE
C0G (NP0)
X7R
Rated voltage in temperature range -55 °C to +150 °C
Derating at higher temperature up to +150 °C
RATINGS
TEST CONDITIONS /
REMARKS
25 V to 3000 V
UR
16 V to 1000 V
X8R
25 V / 50 V
C0G (NP0)
25 V to 100 V
UDC  1/2 UR
X7R
16 V to 100 V
UDC  1/2 UR
C0G (NP0)
25 V to 100 V
UDC  1/4 UR
X7R
16 V to 100 V
UDC  1/4 UR
X8R
25 V / 50 V
UDC  1/4 UR
if CR < 10 pF: C  ± 120 ppm/°C
Derating at higher temperature up to +175 °C
Temperature coefficient in temperature range
-55 °C to +125 °C
SYMBOL
C0G (NP0)
C
 ± 30 ppm/°C
X7R
C
 ± 15 %
C0G (NP0)
C
 ± 30 ppm/°C
Temperature coefficient in temperature range
-55 °C to +150 °C
X7R
X8R
Temperature coefficient in temperature range
-55 °C to +175 °C
X7R
C
C
X7R
X8R
+ 15 % / - 30 %
 ± 15 %
 15 % / - 50 %
 0.0015
C0G (NP0)
Dissipation factor in temperature range
-55 °C to +175 °C
if CR < 10 pF: C  ± 120 ppm/°C
tan 
 0.06
 0.06
2.3 STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 06-Nov-14
Document Number: 45226
35
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
INSULATION RESISTANCE VS. TEMPERATURE
TEMPERATURE DEPENDENCE OF CAPACITANCE
10 000
0.4
0.2
0.0
-0.2
-0.4
1000
(ΩF)
INSULATION RESISTANCE
% CAPACITANCE CHANGE
0.6
100
-0.6
10
-50
0
100
50
10
150
25
TEMPERATURE IN °C
0.2
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
150
VOLTAGE COEFFICIENT OF CAPACITANCE
AGING RATE
0.2
0.1
0.0
-0.1
0.1
0.0
-0.1
-0.2
-0.2
1
10
100
1000
10 000
0
10
HOURS
20
30
40
50
60
70
80
90
100
DC VOLTS APPLIED
CHANGE OF CAPACITANCE WITH FREQUENCY
CHANGE OF DISSIPATION FACTOR WITH FREQUENCY
+2
0.001
DISSIPATION FACTOR
% CAPACITANCE CHANGE
100
50
TEMPERATURE °C
+1
0
0.0005
-1
0.00025
-2
1 kHz
10 kHz
100 kHz
FREQUENCY
Revision: 06-Nov-14
1 MHz
1 kHz
10 kHz
100 kHz
1 MHz
FREQUENCY
Document Number: 45226
36
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
X7R DIELECTRIC - TYPICAL PARAMETERS
MINIMUM INSULATION RESISTANCE VS. TEMPERATURE
TEMPERATURE COEFFICIENT OF CAPACITANCE
10 000
INSULATION RESISTANCE IN ΩF
% CAPACITANCE CHANGE
15
10
5
0
X7R
-5
-10
-15
-20
-25
-30
-75 -50
-25
0
25
50
75
1000
100
10
100 125 150 175
20
40
60
TEMPERATURE °C
DISSIPATION FACTOR VS. TEMPERATURE
100
120
140
160
180
AGING RATE
6.0
1.0
% CAPACITANCE CHANGE
5.5
% DISSIPATION FACTOR
80
TEMPERATURE IN °C
5.0
4.5
4.0
3.5
3.0
X7R
2.5
2.0
1.5
1.0
0.5
0.0
0.0
-1.0
-2.0
-3.0
-4.0
-75
-50 -25
0
25
50
75
100 125 150 175
1
10
100
TEMPERATURE °C
1000
10 000
HOURS
VOLTAGE VS. TEMPERATURE
VOLTAGE COEFFICIENT OF CAPACITANCE
5
150
X7R
100
50
0
-75 -50
-25
0
25
50
75 100 125 150 175 180
TEMPERATURE °C
Revision: 06-Nov-14
% CAPACITANE CHANGE
% VOLTAGE
200
0
-5
-10
100 V
RATED
25 V
RATED
-15
50 V
RATED
-20
-25
-30
0
10
20
30
40
50
60
70
80
90
100
DC VOLTS APPLIED
Document Number: 45226
37
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
X7R DIELECTRIC - TYPICAL PARAMETERS
DISSIPATION FACTOR VS. VOLTAGE
DISSIPATION FACTOR
DISSIPATION FACTOR
0.016
0.012
50 V
100 V
0.008
DISSIPATION FACTOR VS. VOLTAGE
0.020
0.020
0.016
0.012
0.008
200 V
0
10
20
30
40
50
60
70
DC VOLTS APPLIED
80
0
90 100
UN/V-
100
200
300
400
500
600
DC VOLTS APPLIED
CHANGE OF CAPACITANCE WITH FREQUENCY
CHANGE OF DISSIPATION FACTOR WITH FREQUENCY
0
20
% DISSIPATION FACTOR
% CAPACITANCE CHANGE
500/630 V
0.000
0.004
-10
-20
15
10
5
0
1 kHz
10 kHz
100 kHz
FREQUENCY
Revision: 06-Nov-14
1 MHz
1 kHz
10 kHz
100 kHz
1 MHz
FREQUENCY
Document Number: 45226
38
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
TEMPERATURE COEFFICIENT OF CAPACITANCE
% CAPACITANCE CHANGE
15
10
5
0
-5
-10
-15
-20
-75 -50 -25
0
25
50
INSULATION RESISTANCE (ΩF)
X8R DIELECTRIC - TYPICAL PARAMETERS
MINIMUM INSULATION RESISTANCE VS. TEMPERATURE
10 000
1000
100
10
10
75 100 125 150 175
25
150
AGING RATE
DISSIPATION FACTOR VS. TEMPERATURE
1.0
4.5
4.0
3.5
3.0
2.5
X8R
2.0
1.5
1.0
0.5
% CAPACITANCE CHANGE
5.0
% DISSIPATION FACTOR
100
TEMPERATURE °C
TEMPERATURE °C
0.0
-1.0
-2.0
-3.0
-4.0
0.0
-75 -50 -25
0
25
50 75 100 125 150 175
TEMPERATURE °C
Revision: 06-Nov-14
1
10
100
HOURS
1000
10 000
Document Number: 45226
39
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
3 - LOT ACCEPTANCE TESTS
Process tests available in classes (on request)
GROUP
ACTION
A
Components are tested within the monitoring program of the supplier. The supplier shall submit the part numbers of the
selected component to the customer during the component specification discussions.
B
Components (customer P/N) shall be tested quarterly. Records available only on special request by the customer.
C
Test with each shipment. Records are provided on a monthly basis.
Customer special requirement; requirement should be determined in a specific component specification.
Upon request the records can be submitted in electronic format on monthly basis.
3.1 THERMAL STRENGTH, THERMAL SHOCK SENSIBILITY
Sample size
200
Handling
Mounted on PCB
Thermal shock
1 x 280 °C, no pre-heat, 5 s to 10 s
IR - test (IRATS)
U = UR, T = room temperature, verified
Burn in (BIATS)
Equivalent to 12 h burn-in,
2 x UR/125 °C,
verification time to failure
Acceptance criteria: zero defects (IRATS and BIATS).
3.2 BOARD FLEX TEST
Sample size
20 pcs/lot
X7R, X8R
Every lot
C0G
At least three different part numbers of one component family matrix per quarter
Max. deflection
8 mm (data to be reported, available on request)
3.3 SOLDERABILITY / RESISTANCE TO SOLDERING HEAT
Temperature profile for reflow soldering of SMD parts IPC/JEDEC-J-STD-020C.
Test is done on a regular basis for samples taken randomly out of the line.
Acceptance criteria: at least 95 % new solder and no detachment or leaching of terminations.
4 - ENVIRONMENTAL REQUIREMENTS
A list of the chemical substances content, which must not be used or whose use shall be limited by international law, is available
on request.
Vishay confirms that the components specified in this specification do not contain asbestos nor cadmium, not even in the
smallest volumes.
The manufacturer / supplier confirms that the component during normal handling, storage and assembly, as well as during
operation in the automobile, is non toxic.
Revision: 06-Nov-14
Document Number: 45226
40
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
5 - INSPECTION CRITERIA
The supplier shall carry out visual examination with suitable equipment with approximately 10 x magnification and lighting
appropriate to the specimen under test and the required quality level.
Chipping
The components shall be free of cracks or fissures. Small damages which do not deteriorate the performance of the component
shall be less than 50 % of the surface of the MLCC as defined in EIA 595.
Delamination or Exposed Electrodes
No visible separation or delamination between layers of the capacitor and no exposed electrodes between the two terminals of
the capacitor must be seen.
Metallization
For the metallization, no visible detachment of the metallized terminals and no exposed electrodes must be seen. Defects and
gaps in the metallization on each sides of the terminal must not exceed 10 % of the total area (e.g. A, B, C, …). Leaching shall
not exceed 25 %.
A B
C
Electrode Distance
The ceramic body shall be free of any conducting material between the terminals which reduces the distance of the electrodes.
The minimum distance “D” is 400 μm for all package sizes, except 0402. For the component package 0402 the minimum
distance is 200 μm.
D
Revision: 06-Nov-14
Document Number: 45226
41
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
6 - BOARD FLEX TEST CONDITIONS
6.1 BOARD FLEX DEFINITIONS OF TEST
PCB thickness = (1.6 ± 0.1) mm
Copper thickness = 35 μm
Material FR4 (EP-GC 02 according to DIN 40 802)
LAYOUT / PAD DESIGN (Dimensions in mm)
CASE CODE
PAD SIZE
LB
1.00
1.30
1.80
2.80
3.60
LL
2.20
3.40
4.50
4.50
4.75
0603
0805
1206
1210
1812
LEL
0.75
1.20
1.20
1.30
1.50
LB
Note
• LL = total length; LB = width of the pad; LEL = single pad length
LEL
LL
6.2 SOLDERING INSTRUCTIONS
THICKNESS, RECOMMENDED FOR SOLDER PASTE (Reflow soldering)
CASE CODE
THICKNESS in μm
0402
75 to 90
0603
150 to 200
0805
150 to 200
1206
150 to 200
1210
150 to 200
1812
150 to 200
6.3 TYPICAL TEMPERATURE PROFILE FOR REFLOW SOLDERING (Boardflex test)
LEAD (Pb)-FREE SOLDERING PROFILE
300
MIN. 300 s
MIN. 255 °C
MAX. 260 °C
TEMPERATURE (°C)
250
T (SOLID) MIN. 217 °C
MIN. 190 °C
200
MIN. 40 s
MIN. 90 s
150
100
RAMP DOWN
FROM T (SOLID)
MAX. 6 K/s
RAMP UP
TO 150 °C
MAX. 3 K/s
50
MIN. 110 s
0
0
Revision: 06-Nov-14
50
100
150
200
250
300
350
400
TIME (s)
Document Number: 45226
42
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
6.4 MOUNTING, DIMENSIONS, AND TESTING
Mounting
SMD under test
Printed board
before test
1.6 ± 0.1
+
R=3
+
45 ± 2
Support
Solder
90 ± 1
Testing
Width
20
Material: Aluminum
Width = actual width
of substrate + 5 mm
on both sides
Radius
1 to 2
10 ± 0.1
Printed board
during test
+
1.5 ± 0.1
+
0
All dimensions in mm
6.5 PERFORMANCE OF THE TEST(S)
A) Electrical test according to component specification (Cap, DF, IR)
B) Mounting to PCB
C) Storage at room temperature (min. 10 h)
D) Board flex test
6.6 DETAILS
X7R, X8R
PCB to be deflected continuously, speed 1 mm/s (± 0.5 mm/s)
C0G
PCB to be deflected in steps until cracks or other damages are visible or can be measured.
Dwell time between steps: (5 ± 1) s
6.7 FAILURE CRITERIA
X7R, X8R
Piezoelectric sensor, no failure up to min. 2 mm
C0G
C/C < 1 % or < 1 pF, no failure up to min. 2 mm
Both
Electrical test according to component specification
Revision: 06-Nov-14
Document Number: 45226
43
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31X RoHS Automotive MLCC
www.vishay.com
Vishay Vitramon
7 - AEC-Q200 QUALIFICATION TESTING
NO.
AEC-Q200 TEST ITEM
REFERENCE
1
Pre- and post stress electrical test
User spec
3
High temp exposure (storage)
MIL-STD-202, method 108
4
Temperature cycling
JESD22, method JA-104
5
Destructive physical analysis
EIA-469
6
Moisture resistance
MIL-STD-202, method 106
7
Biased humidity
MIL-STD-202, method 103
8
Operation life
MIL-STD-202 method 108
9
External Visual
MIL-STD-883 method 2009
10
Physical dimension
JESD22, method JB-100
13
Mechanical shock
MIL-STD-202, method 213
14
Vibration
MIL-STD-202, method 204
15
Resistance to solder heat
MIL-STD-202, method 215
16
ESD
AEC-Q200 rev. C
17
Solderability
J-STD-002
20
Electrical characterization
User spec
21
Board flex
AEC-Q200-005
22
Terminal strength
AEC-Q200-006
23
Beam load
AEC-Q200-003
Revision: 06-Nov-14
Document Number: 45226
44
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Automotive Applications
FEATURES
•
•
•
•
•
•
•
•
•
AEC-Q200 qualified with PPAP available
Available in 0402 to 1812 body size
Four dielectric materials
AgPd termination available for silver epoxy
bonding
Available
High operating temperature
Wet build process
Reliable Noble Metal Electrode (NME) system
Parts compliant with ELV directive
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
For more than 25 years Vishay Vitramon has supported the automotive industry with robust, highly reliable MLCCs that have
made it a leader in this segment. All Vishay Vitramon MLCCs are manufactured in “Precious Metal Technology” (PMT / NME)
and a wet build process. They are qualified according to AEC-Q200 with PPAP available on request. Applications for these
devices include automotive “under the hood”, safety and comfort electronics. Their termination finish is 100 % matte tin plate
finish and AgPd which is used with silver epoxy bonding. A polymer (flexible) termination with 100 % matte tin plate finish is
offered for boardflex sensitive applications.
C0G (NP0) DIELECTRIC
X7R, X8R DIELECTRIC
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +150 °C
(above +125 °C changed characteristics, see 2.3)
Operating Temperature: -55 °C to +150 °C
(X7R above +125 °C changed characteristics, see 2.3)
Capacitance Range: 1 pF to 22 nF
Capacitance Range: 120 pF to 1.0 μF
Voltage Range: 25 VDC to 3000 VDC
Voltage Range: 16 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Temperature Coefficient of Capacitance (TCC):
X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied
X8R: ± 15 % from -55 °C to +150 °C, with 0 VDC applied
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values  1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Dissipation Factor (DF):
10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz
16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
> 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging: 0 % maximum per decade
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
 250 VDC-rated:
250 % of rated voltage
500 VDC-rated:
200 % of rated voltage
630 VDC, 1000 VDC-rated:
150 % of rated voltage
3000 VDC-rated:
120 % of rated voltage
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
 250 VDC-rated:
250 % of rated voltage
500 VDC-rated:
min. 150 % of rated voltage
630 VDC, 1000 VDC-rated: min. 120 % of rated voltage
Revision: 23-Oct-14
Document Number: 45040
45
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE CODE
MAXIMUM VOLTAGE
(V)
CAPACITANCE
MINIMUM
MAXIMUM
0402
100
1.0 pF
220 pF
0603
200
1.0 pF
1.0 nF
0805
500
1.0 pF
3.9 nF
1206
630
1.0 pF
10 nF
1210
630
100 pF
12 nF
1812
3000
12 pF
22 nF
0402
100
120 pF
47 nF
0603
200
330 pF
150 nF
0805
500
330 pF
470 nF
1206
630
220 pF
1.0 μF
1210
630
390 pF
1.0 μF
1812
630
10 nF
1.0 μF
0402
100
330 pF
6.8 nF
0603
100
470 pF
33 nF
0805
100
470 pF
100 nF
1206
50
1.0 nF
220 nF
1210
50
10 nF
390 nF
C0G (NP0)
X7R
X8R
Note
• Detail ratings see “Selection Chart”
Revision: 23-Oct-14
Document Number: 45040
46
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
ORDERING INFORMATION - TIN TERMINATION
VJ0805 (2)
CASE
CODE
0402
0603
0805
1206
1210
1812
Y
102
DIELECTRIC CAPACITANCE
NOMINAL
CODE (4)
A = C0G
(NP0)
Y = X7R
H = X8R
K
CAPACITANCE
TOLERANCE
X
A
TERMINATION DC VOLTAGE
RATING (1)
X = Ni barrier
B = ± 0.10 pF
Expressed in
C = ± 0.25 pF 100 % matte tin
picofarads (pF).
plate finish
D = ± 0.5 pF
The first two
B = polymer
F=±1%
digits are
100 % matte tin
G=±2%
significant, the
plate finish (3)(7)
J=±5%
third is a
K = ± 10 %
multiplier. An
M = ± 20 %
“R” indicates a
Note:
decimal point.
C0G (NP0):
Examples
B, C, D < 10 pF
4R7 = 4.7 pF
102 = 1000 pF F, G, J, K 10 pF
X7R / X8R:
J, K, M
J = 16 V
X = 25 V
A = 50 V
B = 100 V
C = 200 V
P = 250 V
E = 500 V
L = 630 V
G = 1000 V
H = 3000 V
A
C
31
MARKING
PACKAGING
PROCESS
CODE
A = unmarked
B = marked
Note:
marking is only
available for
0805 and 1206
vendor ID and
date code
31 =
automotive
100 %
matte tin
plate finish
E / T = 7" reel / plastic tape (5)
C = 7" reel / paper tape
M / R = 11 1/4" / 13" reel / plastic tape (5)
P = 11 1/4" / 13" reel / paper tape
ORDERING INFORMATION - SILVER PALLADIUM TERMINATION
VJ0805 (2)
CASE
CODE
0402
0603
0805
1206
1210
1812
Y
102
DIELECTRIC CAPACITANCE
NOMINAL
CODE (4)
A = C0G
(NP0)
Y = X7R
H = X8R
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An
“R” indicates a
decimal point.
Examples
102 = 1000 pF
K
CAPACITANCE
TOLERANCE
F
A
TERMINATION DC VOLTAGE
RATING (1)
F, E = AgPd (6)(7)
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.5 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Note:
C0G (NP0):
B, C, D < 10 pF
F, G, J, K 10 pF
X7R / X8R:
J, K, M
J = 16 V
X = 25 V
A = 50 V
B = 100 V
C = 200 V
P = 250 V
E = 500 V
L = 630 V
G = 1000 V
H = 3000 V
A
O
34
MARKING
PACKAGING
PROCESS
CODE
A = unmarked
Note:
marking is not
available
34 =
automotive
AgPd finish
E / T = 7" reel / plastic tape (5)
O = 7" reel / flamed paper tape
M / R = 11 1/4" / 13" reel / plastic tape (5)
I = 11 1/4" / 13" reel / flamed paper tape
Note:
“I” and “O” are used for
“F”, “E” termination
size 0402 / 0603 / 0805
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
(2) Case size designator may be replaced by a four digit drawing number
(3) Polymer termination contact [email protected] for availability of ratings
(4) Non-standard values please contact: [email protected] for availability
(5) Packaging “T” and “R” is used for 1812 size
(6) Termination code “E” is for conductive epoxy assembly.
(7) Termination code “B” and “F” are not available with X8R in 0402, 0603 - 100 V, 0805 - 100 V.
Revision: 23-Oct-14
Document Number: 45040
47
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
CASE
CODE
STYLE
LENGTH
(L)
WIDTH
(W)
TERMINATIONS PAD
(P)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
0402
VJ0402
0.040 + 0.004 / - 0.002
(1.00 + 0.10 / - 0.05)
0.020 + 0.004 / - 0.002
(0.50 + 0.10 / - 0.05)
0.024
(0.60)
0.004
(0.10)
0.016
(0.41)
0603
VJ0603
0.063 ± 0.006
(1.60 ± 0.15)
0.031 ± 0.006
(0.80 ± 0.15)
0.038
(0.97)
0.012
(0.30)
0.018
(0.46)
0805
VJ0805
0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20)
0.057
(1.45)
0.010
(0.25)
0.028
(0.71)
1206
VJ1206
0.126 ± 0.010
(3.20 ± 0.25)
0.063 ± 0.010
(1.60 ± 0.25)
0.067
(1.70)
0.010
(0.25)
0.028
(0.71)
1210
VJ1210
0.126 ± 0.010
(3.20 ± 0.25)
0.098 ± 0.010
(2.50 ± 0.25)
0.076
(1.94)
0.010
(0.25)
0.028
(0.71)
1812
VJ1812
0.177 ± 0.010
(4.50 ± 0.25)
0.126 ± 0.010
(3.20 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
Note
• Polymer (B-termination) have increased dimensions:
part length increased by 0.006" (0.15 mm)
Revision: 23-Oct-14
Document Number: 45040
48
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
STYLE
VJ0402
VJ0603
CASE CODE
0402
0603
25 / 50
100
50
100
200
50
VOLTAGE (VDC)
VOLTAGE CODE
X/A
B
A
B
C
A
CAP. CODE
CAP.
••
••
••
••
••
••
1R0
1.0 pF
••
••
••
••
••
••
1R2
1.2 pF
••
••
••
••
••
••
1R5
1.5 pF
1R8
1.8 pF
••
••
••
••
••
••
••
••
••
••
••
••
2R2
2.2 pF
••
••
••
••
••
••
2R7
2.7 pF
3R3
3.3 pF
••
••
••
••
••
••
••
••
••
••
••
••
3R9
3.9 pF
••
••
••
••
••
••
4R7
4.7 pF
5R6
5.6 pF
••
••
••
••
••
••
••
••
••
••
••
••
6R8
6.8 pF
••
••
••
••
••
••
8R2
8.2 pF
100
10 pF
••
••
••
••
••
••
••
••
••
••
••
••
120
12 pF
••
••
••
••
••
••
150
15 pF
180
18 pF
••
••
••
••
••
••
++
++
••
••
••
••
220
22 pF
++
++
••
••
••
••
270
27 pF
330
33 pF
++
++
••
••
••
••
++
++
••
••
••
••
390
39 pF
++
++
••
••
••
••
470
47 pF
560
56 pF
++
++
++
++
++
••
++
++
++
++
++
••
680
68 pF
++
++
++
++
++
••
820
82 pF
101
100 pF
++
++
++
++
++
++
++
++
++
++
++
++
121
120 pF
++
++
++
++
++
151
150 pF
181
180 pF
++
++
++
+
++
++
++
++
+
++
221
220 pF
++
++
+
++
271
270 pF
331
330 pF
++
++
++
++
++
++
391
390 pF
++
++
++
471
470 pF
561
560 pF
++
++
++
++
681
680 pF
++
++
821
820 pF
102
1.0 nF
++
++
++
122
1.2 nF
++
152
1.5 nF
182
1.8 nF
+
+
222
2.2 nF
+
272
2.7 nF
332
3.3 nF
+
+
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
Notes
•• Paper tape, • Plastic tape, ++ Paper tape, + Plastic tape, see table “Product drawings (in use)”
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
RoHS-compliant
Not RoHS-compliant
Revision: 23-Oct-14
VJ0805
0805
100
B
200
C
500
E
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
++
++
++
++
++
++
++
++
++
++
++
++
++
+
+
+
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
++
++
++
++
++
++
++
++
+
+
+
+
+
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
++
++
++
++
+
+
+
+
+
Document Number: 45040
49
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
VJ1210 (1)
STYLE
VJ1206 (1)
CASE CODE
1206
1210
VOLTAGE (VDC)
50 100 200 250 500 / 630 50
100 200 500 / 630
VOLTAGE CODE
A
B
C
P
E/L
A
B
C
E/L
CAP. CODE
CAP.
••
••
••
••
1R0
1.0 pF
••
••
••
••
1R2
1.2 pF
••
••
••
••
1R5
1.5 pF
1R8
1.8 pF
••
••
••
••
••
••
••
••
2R2
2.2 pF
••
••
••
••
2R7
2.7 pF
3R3
3.3 pF
••
••
••
••
••
••
••
••
3R9
3.9 pF
••
••
••
••
4R7
4.7 pF
5R6
5.6 pF
••
••
••
••
••
••
••
••
6R8
6.8 pF
••
••
••
••
8R2
8.2 pF
100
10 pF
••
••
••
••
••
••
••
••
120
12 pF
••
••
••
••
150
15 pF
180
18 pF
••
••
••
••
••
••
••
••
220
22 pF
••
••
••
••
270
27 pF
330
33 pF
••
••
••
••
••
••
••
••
390
39 pF
••
••
••
••
470
47 pF
560
56 pF
••
••
••
••
••
••
••
••
680
68 pF
••
••
••
••
820
82 pF
101
100 pF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
121
120 pF
+
+
+
+
+
+
+
+
151
150 pF
181
180 pF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
221
220 pF
+
+
+
+
+
+
+
+
271
270 pF
331
330 pF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
391
390 pF
+
+
+
+
+
+
+
+
471
470 pF
561
560 pF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
681
680 pF
+
+
+
+
+
+
+
+
821
820 pF
102
1.0 nF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
122
1.2 nF
+
+
+
+
+
+
+
152
1.5 nF
182
1.8 nF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
222
2.2 nF
+
+
+
+
+
+
272
2.7 nF
332
3.3 nF
+
+
+
+
+
+
+
+
+
+
+
392
3.9 nF
+
+
+
+
+
472
4.7 nF
562
5.6 nF
+
+
+
+
+
+
+
+
+
+
682
6.8 nF
+
+
+
+
+
822
8.2 nF
103
10 nF
+
+
+
+
+
+
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
Notes
•• Paper tape, • Plastic tape, ++ Paper tape, + Plastic tape, see table “Product drawings (in use)”
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
RoHS-compliant
Not RoHS-compliant
Revision: 23-Oct-14
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1812 (1)
1812
200 500 / 630 1000 3000
C
E/L
G
H
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45040
50
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ0402
VJ0603
CASE CODE
0402
0603
16
25
50
100
16
25
50
100
200
16
VOLTAGE (VDC)
VOLTAGE CODE
J
X
A
B
J
X
A
B
C
J
CAP. CODE
CAP.
••
••
••
••
121
120 pF
••
••
••
••
151
150 pF
••
••
••
••
181
180 pF
221
220 pF
••
••
••
••
••
••
••
••
271
270 pF
••
••
••
••
••
••
••
••
331
330 pF
391
390 pF
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
471
470 pF
••
••
••
••
••
••
••
••
••
••
561
560 pF
681
680 pF
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
821
820 pF
••
••
••
••
••
••
••
••
••
••
102
1.0 nF
122
1.2 nF
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
152
1.5 nF
••
••
••
••
••
••
••
••
••
••
182
1.8 nF
222
2.2 nF
••
••
••
••
••
••
••
••
••
••
••
••
••
++
••
••
••
••
••
••
272
2.7 nF
••
••
••
++
••
••
••
••
••
••
332
3.3 nF
392
3.9 nF
••
••
••
++
••
••
••
••
••
••
••
••
••
++
••
••
••
••
••
••
472
4.7 nF
••
••
++
••
••
••
••
••
562
5.6 nF
682
6.8 nF
••
••
++
••
••
••
••
••
••
••
++
••
••
••
••
••
822
8.2 nF
++
++
++
••
••
••
••
••
103
10 nF
123
12 nF
++
++
••
••
••
++
••
++
++
••
••
••
++
••
153
15 nF
++
++
••
••
••
++
••
183
18 nF
223
22 nF
++
••
••
••
++
••
++
••
••
••
++
••
273
27 nF
++
••
••
++
++
••
333
33 nF
393
39 nF
++
••
••
++
++
••
++
••
••
++
••
473
47 nF
••
++
++
••
563
56 nF
683
68 nF
••
++
++
+
••
++
++
+
823
82 nF
++
++
++
+
104
100 nF
124
120 nF
+
+
+
+
154
150 nF
+
184
180 nF
224
220 nF
+
+
274
270 nF
+
334
330 nF
394
390 nF
+
+
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
Notes
•• Paper tape, • Plastic tape, ++ Paper tape, + Plastic tape, see table “Product drawings (in use)”
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
RoHS-compliant
Not RoHS-compliant
Revision: 23-Oct-14
25
X
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
+
+
+
+
+
+
+
+
+
VJ0805
0805
50
100 200
A
B
C
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
+
+
+
+
+
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
+
+
+
+
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
250
P
500
E
•
••
Document Number: 45040
51
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
683
68 nF
823
82 nF
104
100 nF
124
120 nF
154
150 nF
184
180 nF
224
220 nF
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
16
J
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
+
+
+
+
+
25
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
+
+
+
+
+
VJ1206 (1)
1206
50 100 200 500 / 630
A
B
C
E/L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
+
+
+
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
+
+
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
16
J
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
+
+
+
+
+
25
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
+
+
+
+
+
X7R
VJ1210 (1)
1210
50 100 200 500 / 630
A
B
C
E/L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
+
+
+
+
+
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
+
+
+
+
+
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1812 (1)
1812
100 200 500
B
C
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
630
L
•
•
•
•
•
•
•
•
•
•
•
•
Notes
•• Paper tape, • Plastic tape, ++ Paper tape, + Plastic tape, see table “Product drawings (in use)”
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
RoHS-compliant
Not RoHS-compliant
Revision: 23-Oct-14
Document Number: 45040
52
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X8R
STYLE
VJ0402
VJ0603
VJ0805
CASE CODE
0402
0603
0805
25
50
100
25
50
100
25
50
VOLTAGE (VDC) (2)
VOLTAGE CODE
X
A
B
X
A
B
X
A
CAP. CODE
CAP.
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
••
••
••
331
330 pF
••
••
••
391
390 pF
••
••
••
••
••
••
••
471
470 pF
••
••
••
••
••
••
••
561
560 pF
••
••
••
••
••
••
••
••
681
680 pF
••
••
••
••
••
••
••
••
821
820 pF
••
••
••
••
••
••
••
••
102
1.0 nF
••
••
••
••
••
••
••
••
122
1.2 nF
••
••
••
••
••
••
••
152
1.5 nF
••
••
••
••
••
••
••
182
1.8 nF
••
••
••
••
••
••
••
222
2.2 nF
••
••
••
••
••
••
272
2.7 nF
••
••
••
••
••
••
332
3.3 nF
••
••
••
••
••
••
392
3.9 nF
••
••
••
••
••
••
472
4.7 nF
••
••
••
••
••
562
5.6 nF
••
••
••
••
••
682
6.8 nF
••
••
••
••
822
8.2 nF
••
••
••
••
103
10 nF
••
••
••
••
123
12 nF
••
••
••
••
153
15 nF
••
••
••
••
183
18 nF
••
••
••
223
22 nF
••
••
•
273
27 nF
••
••
•
333
33 nF
••
•
393
39 nF
•
•
473
47 nF
•
•
563
56 nF
•
683
68 nF
•
823
82 nF
•
104
100 nF
124
120 nF
154
150 nF
184
180 nF
224
220 nF
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
125
1.2 μF
Notes
•• Paper tape, • Plastic tape
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
(2) For other voltage ratings, please contact [email protected]
RoHS-compliant
Not RoHS-compliant
Revision: 23-Oct-14
100
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
VJ1206 (1)
1206
25
50
X
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210 (1)
1210
25
50
X
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45040
53
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
PRODUCT DRAWING (in use)
CASE CODE
X - TERMINATION CODE
(100 % MATTE TIN)
CODE
F - TERMINATION CODE
(AgPd)
DRAWING C0G (NP0)
DRAWING X7R
DRAWING C0G (NP0)
DRAWING X7R
•• = paper tape
7175
9172
7175
9072
++ = paper tape
7172
7172
7072
7072
•• = paper tape
7179
9155
7179
9097
++ = paper tape
7155
7155
7097
7097
• = plastic tape
-
-
7179
9097
+ = plastic tape
7155
7155
7097
7097
•• = paper tape
7188
9156
7188
9080
++ = paper tape
7156
7156
7080
7080
• = plastic tape
-
9156
7188
9080
+ = plastic tape
7156
7156
7080
7080
•• = paper tape
7180
-
-
-
• = plastic tape
-
9157
7180
9081
+ = plastic tape
7157
7157
7081
7081
• = plastic tape
-
9158
-
9099
+ = plastic tape
7158
7158
7099
7099
0402
0603
0805
1206
1210
STANDARD PACKAGING QUANTITIES (1)(2)
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
CASE CODE
TAPE SIZE
PAPER TAPE
PACKAGING CODE
“C” / “O” (4)
PLASTIC TAPE
PACKAGING CODE
“E / T” (6)
PAPER TAPE
PACKAGING CODE
“P” / “I” (4)
PLASTIC TAPE
PACKAGING CODE
“M / R” (6)
0402
8 mm
5000 / 10 000 (3)
n/a
10 000 / 30 000 (3)
n/a
0603
8 mm
4000
4000
10 000
10 000
(5)
8 mm
3000
3000
10 000
10 000
1206 (5)
8 mm
3000
2500 / 3000
10 000
9000 / 10 000
1210 (5)
8 mm
n/a
2000 / 2500 / 3000
n/a
9000 / 10 000
1812
12 mm
n/a
1000
n/a
4000
0805
Notes
(1) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(2) n/a = not available
(3) Quantity can vary with customer request
(4) Flamed paper tape code “O” (7" reel) and “I” (11 1/4/13" reel) for AgPd terminated parts (termination code F, E)
(5) Packaging “C/P” or “E/M” and quantity can depend from product thickness
(6) Packaging code “T”, “R” are used for size 1812.
Revision: 23-Oct-14
Document Number: 45040
54
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
1 - GENERAL CERTIFICATES
# Quality management system according to ISO/TS 16949: 2009
Yes
# Quality management system according to ISO 9001: 2008
Yes
# Environmental certification according to ISO 14001: 2004
Yes
# Health and safety system according to OHSA 18001
Yes
2 - TECHNICAL REQUIREMENTS
Unless specified in component specification, these parameters are the minimum requirements for the components.
2.1 OPERATING TEMPERATURE RANGE
For standard applications
TA: -55 °C to +125 °C
See characteristics 2.3
For high temperature applications
TA: -55 °C to +150 °C
See characteristics 2.3
For ultra high temperature applications
TA: -55 °C to +175 °C
See characteristics 2.3
2.2 STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
2.3 CHARACTERISTICS
PARAMETER
Rated voltage in temperature range -55 °C to +125 °C
Rated voltage in temperature range -55 °C to +150 °C
Derating at higher temperature up to +150 °C
Derating at higher temperature up to +175 °C
Temperature coefficient in temperature range
-55 °C to +125 °C
Temperature coefficient in temperature range
-55 °C to +150 °C
CERAMIC
TYPE
X7R
UR
16 V to 630 V
25 V/50 V
C0G (NP0),
25 V to 100 V
UDC  1/2 UR
X7R
16 V to 100 V
UDC  1/2 UR
C0G (NP0),
25 V to 100 V
UDC  1/4 UR
X7R
16 V to 100 V
UDC  1/4 UR
X8R
25 V/50 V
UDC  1/4 UR
if CR < 10 pF: C  ± 120 ppm/K
C0G (NP0)
C
 ± 30 ppm/C
X7R
C
 ± 15 %
C0G (NP0)
C
 ± 30 ppm/C
X7R
C
+15 %/-30 %
C
 15 %/-50 %
X7R
X7R
X8R
Revision: 23-Oct-14
TEST CONDITIONS/
REMARKS
X8R
if CR < 10 pF: C  ± 120 ppm/K
 ± 15 %
 0.0015
C0G (NP0)
Dissipation factor in temperature range
-55 °C to +175 °C
RATINGS
25 V to 3000 V
C0G (NP0)
X8R
Temperature coefficient in temperature range
-55 °C to +175 °C
SYMBOL
tan 
 0.06
 0.06
Document Number: 45040
55
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
INSULATION RESISTANCE VS. TEMPERATURE
TEMPERATURE DEPENDENCE OF CAPACITANCE
10 000
0.4
0.2
0.0
-0.2
-0.4
1000
(ΩF)
INSULATION RESISTANCE
% CAPACITANCE CHANGE
0.6
100
-0.6
10
-50
0
100
50
10
150
25
TEMPERATURE IN °C
0.2
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
150
VOLTAGE COEFFICIENT OF CAPACITANCE
AGING RATE
0.2
0.1
0.0
-0.1
0.1
0.0
-0.1
-0.2
-0.2
1
10
100
1000
10 000
0
10
HOURS
20
30
40
50
60
70
80
90
100
DC VOLTS APPLIED
CHANGE OF CAPACITANCE WITH FREQUENCY
CHANGE OF DISSIPATION FACTOR WITH FREQUENCY
+2
0.001
DISSIPATION FACTOR
% CAPACITANCE CHANGE
100
50
TEMPERATURE °C
+1
0
0.0005
-1
0.00025
-2
1 kHz
10 kHz
100 kHz
FREQUENCY
Revision: 23-Oct-14
1 MHz
1 kHz
10 kHz
100 kHz
1 MHz
FREQUENCY
Document Number: 45040
56
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
X7R DIELECTRIC - TYPICAL PARAMETERS
MINIMUM INSULATION RESISTANCE VS. TEMPERATURE
TEMPERATURE COEFFICIENT OF CAPACITANCE
10 000
INSULATION RESISTANCE IN ΩF
% CAPACITANCE CHANGE
15
10
5
0
X7R
-5
-10
-15
-20
-25
-30
-75
-50 -25
0
25
50
75
1000
100
10
100 125 150 175
20
40
60
TEMPERATURE °C
DISSIPATION FACTOR VS. TEMPERATURE
100
120
140
160
180
AGING RATE
6.0
1.0
% CAPACITANCE CHANGE
5.5
% DISSIPATION FACTOR
80
TEMPERATURE IN °C
5.0
4.5
4.0
3.5
3.0
X7R
2.5
2.0
1.5
1.0
0.5
0.0
0.0
-1.0
-2.0
-3.0
-4.0
-75
-50 -25
0
25
50
75
100 125 150 175
1
10
100
TEMPERATURE °C
1000
10 000
HOURS
VOLTAGE VS. TEMPERATURE
VOLTAGE COEFFICIENT OF CAPACITANCE
5
150
X7R
100
50
0
-75 -50
-25
0
25
50
75 100 125 150 175 180
TEMPERATURE °C
Revision: 23-Oct-14
% CAPACITANE CHANGE
% VOLTAGE
200
0
-5
-10
100 V
RATED
25 V
RATED
-15
50 V
RATED
-20
-25
-30
0
10
20
30
40
50
60
70
80
90
100
DC VOLTS APPLIED
Document Number: 45040
57
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
X7R DIELECTRIC - TYPICAL PARAMETERS
DISSIPATION FACTOR VS. VOLTAGE
DISSIPATION FACTOR
DISSIPATION FACTOR
0.016
0.012
50 V
100 V
0.008
DISSIPATION FACTOR VS. VOLTAGE
0.020
0.020
0.016
0.012
0.008
200 V
0
10
20
30
40
50
60
70
DC VOLTS APPLIED
80
0
90 100
UN/V-
100
200
300
400
500
600
DC VOLTS APPLIED
CHANGE OF CAPACITANCE WITH FREQUENCY
CHANGE OF DISSIPATION FACTOR WITH FREQUENCY
0
20
% DISSIPATION FACTOR
% CAPACITANCE CHANGE
500/630 V
0.000
0.004
-10
-20
15
10
5
0
1 kHz
10 kHz
100 kHz
FREQUENCY
Revision: 23-Oct-14
1 MHz
1 kHz
10 kHz
100 kHz
1 MHz
FREQUENCY
Document Number: 45040
58
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
X8R DIELECTRIC - TYPICAL PARAMETERS
% CAPACITANCE CHANGE
10
5
0
-5
-10
-15
-20
-75 -50 -25
0
25
50
MINIMUM INSULATION RESISTANCE VS. TEMPERATURE
INSULATION RESISTANCE (ΩF)
TEMPERATURE COEFFICIENT OF CAPACITANCE
15
10 000
1000
100
10
10
75 100 125 150 175
25
150
AGING RATE
DISSIPATION FACTOR VS. TEMPERATURE
1.0
4.5
4.0
3.5
3.0
2.5
X8R
2.0
1.5
1.0
0.5
% CAPACITANCE CHANGE
5.0
% DISSIPATION FACTOR
100
TEMPERATURE °C
TEMPERATURE °C
0.0
-1.0
-2.0
-3.0
-4.0
0.0
-75 -50 -25
0
25
50 75 100 125 150 175
TEMPERATURE °C
Revision: 23-Oct-14
1
10
100
HOURS
1000
10 000
Document Number: 45040
59
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
3 - LOT ACCEPTANCE TESTS
Process tests available in classes (on request)
GROUP
ACTION
A
Components are tested within the monitoring program of the supplier. The supplier shall submit the part numbers of the
selected component to the customer during the component specification discussions.
B
Components (customer P/N) shall be tested quarterly. Records available only on special request by the customer.
C
Test with each shipment. Records are provided on a monthly basis.
Customer special requirement; requirement should be determined in a specific component specification.
Upon request the records can be submitted in electronic format on monthly basis.
3.1 THERMAL STRENGTH, THERMAL SHOCK SENSIBILITY
Sample size
200
Handling
Mounted on PCB
Thermal shock
1 x 280 °C, no pre-heat, 5 s to 10 s
IR - test (IRATS)
U = UR, T = room temperature, verified
Burn in (BIATS)
Equivalent to 12 h burn-in,
2 x UR/125 °C,
verification time to failure
Acceptance criteria: zero defects (IRATS and BIATS).
3.2 BOARD FLEX TEST
Sample size
20 pcs/lot
X7R, X8R
Every lot
C0G
At least three different part numbers of one component family matrix per quarter
Max. deflection
8 mm (data to be reported, available on request)
3.3 SOLDERABILITY/RESISTANCE TO SOLDERING HEAT
Temperature profile for reflow soldering of SMD parts IPC/JEDEC-J-STD-020C.
Test is done on a regular basis for samples taken randomly out of the line.
Acceptance criteria: at least 95 % new solder and no detachment or leaching of terminations.
4 - ENVIRONMENTAL REQUIREMENTS
A list of the chemical substances content, which must not be used or whose use shall be limited by international law, is available
on request.
Vishay confirms that the components specified in this specification do not contain asbestos nor cadmium, not even in the
smallest volumes.
The manufacturer/supplier confirms that the component during normal handling, storage and assembly, as well as during
operation in the automobile, is non toxic.
Revision: 23-Oct-14
Document Number: 45040
60
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
5 - INSPECTION CRITERIA
The supplier shall carry out visual examination with suitable equipment with approximately 10 x magnification and lighting
appropriate to the specimen under test and the required quality level.
Chipping
The components shall be free of cracks or fissures. Small damages which do not deteriorate the performance of the component
shall be less than 50 % of the surface of the MLCC as defined in EIA 595.
Delamination or Exposed Electrodes
No visible separation or delamination between layers of the capacitor and no exposed electrodes between the two terminals of
the capacitor must be seen.
Metallization
For the metallization, no visible detachment of the metallized terminals and no exposed electrodes must be seen. Defects and
gaps in the metallization on each sides of the terminal must not exceed 10 % of the total area (e.g. A, B, C, …). Leaching shall
not exceed 25 %.
A B
C
Electrode Distance
The ceramic body shall be free of any conducting material between the terminals which reduces the distance of the electrodes.
The minimum distance “D” is 400 μm for all package sizes, except 0402. For the component package 0402 the minimum
distance is 200 μm.
D
Revision: 23-Oct-14
Document Number: 45040
61
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
6 - BOARD FLEX TEST CONDITIONS
6.1 BOARD FLEX DEFINITIONS OF TEST
PCB thickness = (1.6 ± 0.1) mm
Copper thickness = 35 μm
Material FR4 (EP-GC 02 according to DIN 40 802)
LAYOUT/PAD DESIGN (Dimensions in mm)
CASE CODE
PAD SIZE
LB
1.00
1.30
1.80
2.80
3.60
LL
2.20
3.40
4.50
4.50
4.75
0603
0805
1206
1210
1812
LEL
0.75
1.20
1.20
1.30
1.50
LB
Note
• LL = total length; LB = width of the pad; LEL = single pad length
LEL
LL
6.2 SOLDERING INSTRUCTIONS
THICKNESS, RECOMMENDED FOR SOLDER PASTE (Reflow soldering)
CASE CODE
THICKNESS in μm
0402
0603
0805
1206
1210
1812
75 to 90
150 to 200
150 to 200
150 to 200
150 to 200
150 to 200
6.3 TYPICAL TEMPERATURE PROFILE FOR REFLOW SOLDERING (Boardflex test)
LEAD (Pb)-FREE SOLDERING PROFILE
300
MIN. 300 s
MIN. 255 °C
MAX. 260 °C
TEMPERATURE (°C)
250
T (SOLID) MIN. 217 °C
MIN. 190 °C
200
MIN. 40 s
MIN. 90 s
150
100
RAMP DOWN
FROM T (SOLID)
MAX. 6 K/s
RAMP UP
TO 150 °C
MAX. 3 K/s
50
MIN. 110 s
0
0
Revision: 23-Oct-14
50
100
150
200
250
300
350
400
TIME (s)
Document Number: 45040
62
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
6.4 MOUNTING, DIMENSIONS AND TESTING
Mounting
SMD under test
Printed board
before test
1.6 ± 0.1
+
R=3
+
45 ± 2
Support
Solder
90 ± 1
Width
Testing
20
Material: Aluminum
Width = actual width
of substrate + 5 mm
on both sides
Radius
1 to 2
10 ± 0.1
Printed board
during test
+
1.5 ± 0.1
+
0
All dimensions in mm
6.5 PERFORMANCE OF THE TEST(S)
A) Electrical test according to component specification (Cap, DF, IR)
B) Mounting to PCB
C) Storage at room temperature (min. 10 h)
D) Board flex test
6.6 DETAILS
X7R, X8R
PCB to be deflected continuously, speed 1 mm/s (± 0.5 mm/s)
C0G
PCB to be deflected in steps until cracks or other damages are visible or can be measured. Dwell time between
steps: (5 ± 1) s
6.7 FAILURE CRITERIA
X7R, X8R
Piezoelectric sensor, no failures up to min. 2 mm
C0G (NP0)
C/C < 1 % or < 1 pF, no failures up to min. 2 mm
Both
Electrical test according to component specification
Revision: 23-Oct-14
Document Number: 45040
63
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....31 / VJ....34 Automotive MLCC
www.vishay.com
Vishay Vitramon
7 - AEC-Q200 QUALIFICATION TESTING
NO.
AEC-Q200 TEST ITEM
REFERENCE
1
Pre- and post stress electrical test
User spec
3
High temp exposure (storage)
MIL-STD-202, method 108
4
Temperature cycling
JESD22, method JA-104
5
Destructive physical analysis
EIA-469
6
Moisture resistance
MIL-STD-202, method 106
7
Biased humidity
MIL-STD-202, method 103
8
Operation life
MIL-STD-202 method 108
9
External Visual
MIL-STD-883 method 2009
10
Physical dimension
JESD22, method JB-100
13
Mechanical shock
MIL-STD-202, method 213
14
Vibration
MIL-STD-202, method 204
15
Resistance to solder heat
MIL-STD-202, method 215
16
ESD
AEC-Q200 rev. C
17
Solderability
J-STD-002
20
Electrical characterization
User spec
21
Board flex
AEC-Q200-005
22
Terminal strength
AEC-Q200-006
23
Beam load
AEC-Q200-003
Revision: 23-Oct-14
Document Number: 45040
64
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
VJ OMD Series....................... 66
VJ HVArc Guard®................... 80
VJ Source Energy
Capacitor (SEC) ..................... 88
MLCCs
for
High Voltage and
Safety Applications
(NME Technology)
VJ Controlled Discharge
Capacitor (CDC)..................... 93
VJ Safety Certified
Capacitors C0G (NP0) ........... 98
VJ Safety Certified
Capacitors X7R ...................... 102
VJ OMD Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitor Solutions
for Boardflex Sensitive Applications
FEATURES
• Open Mode Design (OMD) reduces risk of
shorts or leakage in board flex applications
• Excellent reliability and thermal shock
performance
• Efficient low-power consumption, ripple
current capable to 1.2 ARMS at 100 kHz
• High voltage breakdown compared to
standard design
Available
• 100 % voltage conditioning available up to
630 VDC rating (process code “5H”)
Contact [email protected] for higher voltages.
• Polymer termination available for intensive board flex
requirements
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
•
•
•
•
•
•
Demanding boardflex applications
Input filter capacitors
Output filter capacitors
Snubber capacitors reduce MOSFET voltage spikes
Filtering for switching power supplies
For lighting and other AC applications please contact:
[email protected]
ELECTRICAL SPECIFICATIONS
C0G (NP0)
X7R
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 10 pF to 47 nF
Capacitance Range: 100 pF to 1.8 μF
Voltage Range: 50 VDC to 3000 VDC
Voltage Range: 16 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Temperature Coefficient of Capacitance (TCC):
± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values  1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Dissipation Factor (DF):
< 50 V ratings 3.5 % maximum at 1.0 VRMS and 1 kHz
50 V ratings 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E
Applied test voltages
 200 VDC-rated:
250 % of rated voltage
200 % of rated voltage
500 VDC-rated:
630 VDC / 1000 VDC-rated:
150 % of rated voltage
1500 VDC to 3000 VDC-rated:
120 % of rated voltage
Revision: 01-Aug-14
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E
Applied test voltages
 250 VDC-rated:
250 % of rated voltage
min. 150 % of rated voltage
500 VDC-rated:
630 VDC / 1000 VDC-rated:
150 % of rated voltage
1500 VDC to 3000 VDC-rated:
120 % of rated voltage
Document Number: 45198
66
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE
MAXIMUM VOLTAGE
(V)
1206
1210
1808
1812
1825
2220
2225
0805
1206
1210
1808
1812
1825
2220
2225
1500
2000
3000
3000
1000
1000
1000
630
2000
2000
3000
3000
2000
3000
2000
C0G (NP0)
X7R
CAPACITANCE
MINIMUM
10 pF
10 pF
10 pF
10 pF
15 pF
270 pF
270 pF
470 pF
270 pF
390 pF
220 pF
100 pF
5.6 nF
1.0 nF
5.6 nF
MAXIMUM
4.7 nF
8.2 nF
8.2 nF
18 nF
33 nF
39 nF
47 nF
220 nF
680 nF
1.0 μF
18 nF
1.2 μF
1.5 μF
1.8 μF
1.8 μF
Note
• Detail ratings see “Selection Chart”
ORDERING INFORMATION
VJ1210
Y
474
J
X
A
A
T
# (2)
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL
CODE
CAPACITANCE
TOLERANCE
TERMINATION
DC
VOLTAGE
RATING (1)
MARKING
PACKAGING
PROCESS
CODE
0805
1206
1210
1808
1812
1825
2220
2225
A = C0G
(NP0)
Y = X7R
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An “R”
indicates a
decimal point.
Examples
474 = 470 000 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Note
C0G (NP0):
F, G, J, K
X7R:
J, K, M
X = Ni barrier
100 % tin plated
matte finish
E = AgPd (3)
B = polymer
100 % tin plated
matte finish
J = 16 V
X = 25 V
A = 50 V
B = 100 V
C = 200 V
P = 250 V
E = 500 V
L = 630 V
G = 1000 V
R = 1500 V
F = 2000 V
H = 3000 V
A=
unmarked
(4)
C = 7" reel / paper tape
T = 7" reel / plastic tape
P = 11 1/4" / 13" reel /
paper tape
R = 11 1/4" / 13" reel /
plastic tape
O = 7" reel / flamed
paper tape
I = 11 1/4" / 13" reel /
flamed paper tape
Note
“I” and “O” are used for
“E” termination size 0805
4X =
OMD cap
5H =
OMD cap
100 %
voltage
conditioning
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
(2) Process code with 2 digits has to be added.
(3) Termination code E” is for conductive epoxy assembly.
(4) Other termination options contact [email protected] for availability.
ENVIRONMENTAL STATUS
TERMINATION CODE
X
E
B
Revision: 01-Aug-14
TERMINATION DESCRIPTION
Ni barrier 100 % tin plated matte finish
AgPd
Polymer layer, 100 % tin plated matte finish
RoHS COMPLIANT
Yes
Yes
Yes
VISHAY GREEN
Yes
Yes
No
Document Number: 45198
67
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
CASE CODE
STYLE
LENGTH
(L)
WIDTH
(W)
TERMINATION PAD
(P)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
0805
VJ0805
0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20)
0.057 (1.45)
0.010 (0.25)
0.028 (0.71)
1206
VJ1206
0.126 ± 0.010
(3.20 ± 0.25)
0.063 ± 0.010
(1.60 ± 0.25)
0.067 (1.70)
0.010 (0.25)
0.028 (0.71)
1210
VJ1210
0.126 ± 0.010
(3.20 ± 0.25)
0.098 ± 0.010
(2.50 ± 0.25)
0.067 (1.70)
0.010 (0.25)
0.028 (0.71)
1808
VJ1808
0.180 ± 0.012
(4.57 ± 0.30)
0.080 ± 0.010
(2.03 ± 0.25)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
1812
VJ1812
0.177 ± 0.012
(4.50 ± 0.30)
0.126 ± 0.008
(3.20 ± 0.20)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
1825
VJ1825
0.177 ± 0.012
(4.50 ± 0.30)
0.252 ± 0.010
(6.40 ± 0.25)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
2220
VJ2220
0.220 ± 0.010
(5.59 ± 0.25)
0.200 ± 0.010
(5.08 ± 0.25)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
2225
VJ2225
0.220 ± 0.010
(5.59 ± 0.25)
0.250 ± 0.010
(6.35 ± 0.25)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
Note
• Polymer (B-termination) have increased dimensions:
length 0.006" (0.15 mm)
Revision: 01-Aug-14
Document Number: 45198
68
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
683
68 nF
823
82 nF
104
100 nF
C0G (NP0)
VJ1206 (1)
VJ1210 (1)
VJ1808 (1)
1206
1210
1808
50 100 200 500 630 1000 1500 50 100 200 500 630 1000 1500 2000 50 100 200 500 630 1000 1500 2000 3000
A B C E L
G
R A B C E L
G
R
F A B C E L
G
R
F
H
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
Revision: 01-Aug-14
Document Number: 45198
69
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
683
68 nF
823
82 nF
104
100 nF
C0G (NP0)
50
A
100
B
200
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1812 (1)
1812
500
630 1000
E
L
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1500
R
2000
F
3000
H
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1825 (1)
1825
200
500
C
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
630
L
1000
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
Revision: 01-Aug-14
Document Number: 45198
70
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
C0G (NP0)
CAP.
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
27 nF
33 nF
39 nF
47 nF
56 nF
68 nF
82 nF
100 nF
50
A
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ2220 (1)
2220
200
500
C
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
630
L
1000
G
50
A
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ2225 (1)
2225
200
500
C
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
630
L
1000
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
Revision: 01-Aug-14
Document Number: 45198
71
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ0805 (1)
CASE CODE
0805
16 25 50 100 200 500 630
16
25
50
100
VOLTAGE (VDC)
VOLTAGE CODE
J
X
A
B
C
E
L
J
X
A
B
CAP. CODE
CAP.
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
•
•
•
•
331
330 pF
•
•
•
•
391
390 pF
•
•
•
•
471
470 pF
••
••
••
••
••
•
•
•
•
•
•
561
560 pF
••
••
••
••
••
•
•
•
•
•
•
681
680 pF
••
••
••
••
••
•
•
•
•
•
•
821
820 pF
••
••
••
••
••
•
•
•
•
•
•
102
1.0 nF
••
••
••
••
••
•
•
•
•
•
•
122
1.2 nF
••
••
••
••
••
•
•
•
•
•
•
152
1.5 nF
••
••
••
••
••
•
•
•
•
•
•
182
1.8 nF
••
••
••
••
••
•
•
•
•
•
•
222
2.2 nF
••
••
••
••
••
•
•
•
•
•
•
272
2.7 nF
••
••
••
••
••
•
•
•
•
•
•
332
3.3 nF
••
••
••
••
••
•
•
•
•
•
•
392
3.9 nF
••
••
••
••
••
•
•
•
•
•
•
472
4.7 nF
••
••
••
••
••
•
•
•
•
•
•
562
5.6 nF
••
••
••
••
•
•
•
•
•
682
6.8 nF
••
••
••
••
•
•
•
•
•
822
8.2 nF
••
••
••
••
•
•
•
•
•
103
10 nF
••
••
••
••
•
•
•
•
•
123
12 nF
••
••
••
•
•
•
•
•
•
153
15 nF
••
••
••
•
•
•
•
•
•
183
18 nF
••
••
••
•
•
•
•
•
•
223
22 nF
••
••
••
•
•
•
•
•
•
273
27 nF
•
•
•
•
•
•
•
•
333
33 nF
•
•
•
•
•
•
•
•
393
39 nF
•
•
•
•
•
•
•
•
473
47 nF
•
•
•
•
•
•
•
•
563
56 nF
•
•
•
•
•
•
•
683
68 nF
•
•
•
•
•
•
•
823
82 nF
•
•
•
•
•
•
•
104
100 nF
•
•
•
•
•
•
•
124
120 nF
•
•
•
•
•
•
154
150 nF
•
•
•
•
•
•
184
180 nF
•
•
•
•
•
224
220 nF
•
•
•
•
274
270 nF
•
•
•
334
330 nF
•
•
•
394
390 nF
•
•
474
470 nF
•
•
564
560 nF
•
684
680 nF
•
824
820 nF
105
1.0 μF
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
Notes
RoHS-compliant
•• Paper tape • Plastic tape
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
Revision: 01-Aug-14
VJ1206 (1)
1206
200 500
C
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
630
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1000 1500 2000
G
R
F
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45198
72
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ1210 (1)
CASE CODE
1210
16
25
50
100
200
500
630 1000 1500
VOLTAGE (VDC)
VOLTAGE CODE
J
X
A
B
C
E
L
G
R
CAP. CODE
CAP.
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
•
•
471
470 pF
•
•
561
560 pF
•
•
681
680 pF
•
•
821
820 pF
•
•
102
1.0 nF
•
•
122
1.2 nF
•
•
152
1.5 nF
•
•
182
1.8 nF
•
•
222
2.2 nF
•
•
272
2.7 nF
•
•
332
3.3 nF
•
•
392
3.9 nF
•
•
472
4.7 nF
•
•
562
5.6 nF
•
682
6.8 nF
•
822
8.2 nF
•
103
10 nF
•
•
•
•
•
•
•
•
123
12 nF
•
•
•
•
•
•
•
153
15 nF
•
•
•
•
•
•
•
183
18 nF
•
•
•
•
•
•
•
223
22 nF
•
•
•
•
•
•
•
273
27 nF
•
•
•
•
•
•
•
333
33 nF
•
•
•
•
•
•
•
393
39 nF
•
•
•
•
•
•
•
473
47 nF
•
•
•
•
•
563
56 nF
•
•
•
•
•
683
68 nF
•
•
•
•
•
823
82 nF
•
•
•
•
•
104
100 nF
•
•
•
•
•
124
120 nF
•
•
•
•
•
154
150 nF
•
•
•
•
•
184
180 nF
•
•
•
•
224
220 nF
•
•
•
•
274
270 nF
•
•
•
•
334
330 nF
•
•
•
•
394
390 nF
•
•
•
•
474
470 nF
•
•
•
•
564
560 nF
•
•
•
684
680 nF
•
•
•
824
820 nF
•
•
105
1.0 μF
•
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
Notes
RoHS-compliant
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
Revision: 01-Aug-14
2000
F
•
•
•
•
•
•
•
•
•
•
•
•
630
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1808 (1)
1808
1000 1500 2000
G
R
F
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3000
H
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45198
73
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ1812 (1)
CASE CODE
1812
50 100 200 250 500 630 1000 1500 2000 3000 100
VOLTAGE (VDC)
VOLTAGE CODE
A
B
C
P
E
L
G
R
F
H
B
CAP. CODE
CAP.
101
100 pF
•
•
•
•
•
121
120 pF
•
•
•
•
•
151
150 pF
•
•
•
•
•
181
180 pF
•
•
•
•
•
221
220 pF
•
•
•
•
•
271
270 pF
•
•
•
•
•
•
331
330 pF
•
•
•
•
•
•
391
390 pF
•
•
•
•
•
•
•
•
•
•
471
470 pF
•
•
•
•
•
•
•
•
•
•
561
560 pF
•
•
•
•
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
•
•
•
•
822
8.2 nF
•
•
•
•
•
•
•
•
103
10 nF
•
•
•
•
•
•
•
•
•
123
12 nF
•
•
•
•
•
•
•
•
153
15 nF
•
•
•
•
•
•
•
•
183
18 nF
•
•
•
•
•
•
•
•
203
20 nF
•
•
•
•
•
•
•
•
223
22 nF
•
•
•
•
•
•
•
•
273
27 nF
•
•
•
•
•
•
•
•
333
33 nF
•
•
•
•
•
•
•
393
39 nF
•
•
•
•
•
•
•
473
47 nF
•
•
•
•
•
•
•
563
56 nF
•
•
•
•
•
•
•
683
68 nF
•
•
•
•
•
•
•
823
82 nF
•
•
•
•
•
•
•
104
100 nF
•
•
•
•
•
•
•
124
120 nF
•
•
•
•
•
•
154
150 nF
•
•
•
•
•
•
184
180 nF
•
•
•
•
•
224
220 nF
•
•
•
•
•
274
270 nF
•
•
•
•
•
334
330 nF
•
•
•
•
•
394
390 nF
•
•
•
•
474
470 nF
•
•
•
564
560 nF
•
•
•
684
680 nF
•
•
•
824
820 nF
•
•
•
105
1.0 μF
•
•
•
125
1.2 μF
•
•
155
1.5 μF
•
185
1.8 μF
225
2.2 μF
Notes
RoHS-compliant
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
Revision: 01-Aug-14
200
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1825 (1)
1825
500 630 1000 1500 2000
E
L
G
R
F
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45198
74
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ2220 (1)
CASE CODE
2220
50
100 200 250 500 630 1000 2000 3000 100
VOLTAGE (VDC)
VOLTAGE CODE
A
B
C
P
E
L
G
F
H
B
CAP. CODE
CAP.
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
•
122
1.2 nF
•
152
1.5 nF
•
182
1.8 nF
•
222
2.2 nF
•
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
•
682
6.8 nF
•
822
8.2 nF
•
103
10 nF
•
•
•
•
•
•
•
•
•
123
12 nF
•
•
•
•
•
•
•
•
•
153
15 nF
•
•
•
•
•
•
•
•
•
183
18 nF
•
•
•
•
•
•
•
•
•
203
20 nF
•
•
•
•
•
•
•
•
•
223
22 nF
•
•
•
•
•
•
•
•
•
273
27 nF
•
•
•
•
•
•
•
•
•
333
33 nF
•
•
•
•
•
•
•
•
393
39 nF
•
•
•
•
•
•
•
•
473
47 nF
•
•
•
•
•
•
•
•
563
56 nF
•
•
•
•
•
•
•
•
683
68 nF
•
•
•
•
•
•
•
•
823
82 nF
•
•
•
•
•
•
•
•
104
100 nF
•
•
•
•
•
•
•
124
120 nF
•
•
•
•
•
•
•
154
150 nF
•
•
•
•
•
•
•
184
180 nF
•
•
•
•
•
•
•
224
220 nF
•
•
•
•
•
•
•
274
270 nF
•
•
•
•
•
334
330 nF
•
•
•
•
•
394
390 nF
•
•
•
•
•
474
470 nF
•
•
•
•
•
564
560 nF
•
•
•
•
•
684
680 nF
•
•
•
•
•
824
820 nF
•
•
•
105
1.0 μF
•
•
•
125
1.2 μF
•
•
•
155
1.5 μF
•
•
•
185
1.8 μF
•
•
225
2.2 μF
Notes
RoHS-compliant
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
Revision: 01-Aug-14
200
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ2225 (1)
2225
500 630 1000 1500 2000
E
L
G
R
F
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45198
75
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
C0G (NP0) CAPACITORS - TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
MIN. INSULATION RESISTANCE VS. TEMPERATURE
10 000
INSULATION RESISTANCE
(ΩF)
% CAPACITANCE CHANGE
2.0
1.5
1.0
1000
0.5
0.0
- 0.5
NP0
- 1.0
- 1.5
100
10
- 2.0
- 75 - 50
- 25
0
25
50
75
10
100 125
100 125
TEMPERATURE °C
TEMPERATURE °C
AGING RATE
VOLTAGE COEFFICIENT OF CAPACITANCE
0.2
30
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
25
0.1
0.0
- 0.1
- 0.2
20
10
0
- 10
- 20
- 30
1
10
100
HOURS
Revision: 01-Aug-14
1000
10 000
0
100 200 300 400
500 600 700 800 900 1000
DC VOLTS APPLIED
Document Number: 45198
76
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
X7R DIELECTRIC - TYPICAL PARAMETERS
RATED VOLTAGE VS. TEMPERATURE
DISSIPATION FACTOR VS. TEMPERATURE
% DISSIPATION FACTOR
% RATED VOLTAGE
200
150
100
50
0
- 75 - 50 - 25
0
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
X5R
X7R
20 50 75 100 125 150 175 180
- 75 - 50 - 25
TEMPERATURE °C
0
25
50
75 100 125 150 175
TEMPERATURE °C
DISSIPATION FACTOR VS. VOLTAGE
VOLTAGE COEFFICIENT OF CAPACITANCE
0.020
10
% CAPACITANCE CHANGE
0
DISSIPATION FACTOR
- 10
- 20
- 30
- 40
- 50
2000 V Rated
- 60
630 V/1000 V/1500 V Rated
0.016
0.012
0.008
200 V
- 70
- 80
0
500
1000
1500
2000
2500
0
IMPEDANCE VS. FREQUENCY 500 V/630 V
IMPEDANCE (Ω)
10
1 µF
0.1 µF
0.01 µF
400
500
600
700
UN/V-
100
10
4.7 nF 2.2 nF
1 nF
1
0.1
0.1
0.1
1
FREQUENCY (MHz)
Revision: 01-Aug-14
300
IMPEDANCE VS. FREQUENCY 2000 V
100
0.01
0.01
200
1000
1000
1
100
DC VOLTS APPLIED
DC VOLTS APPLIED
IMPEDANCE (Ω)
500/630 V
0.000
10
100
1
10
100
1000
FREQUENCY (MHz)
Document Number: 45198
77
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
X7R DIELECTRIC - TYPICAL PARAMETERS
VOLTAGE COEFFICIENT OF CAPACITANCE
HIGHER CAPACITANCE
10
10
0
0
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
VOLTAGE COEFFICIENT OF CAPACITANCE
LOWER CAPACITANCE
- 10
- 20
- 30
- 40
- 50
Case Size
1206
1210
1808
1812
- 60
- 70
Range
100 pF to 4700 pF
390 pF to 10 000 pF
470 pF to 18 000 pF
1000 pF to 27 000 pF
Case Size
1206
1210
1812
- 10
- 20
Range
5600 pF to 18 000 pF
12 000 pF to 39 000 pF
33 000 pF to 100 000 pF
- 30
- 40
- 50
- 60
- 70
- 80
- 90
- 80
0
100
200
300
500
400
600
0
700
200
100
300
400
500
600
700
DC VOLTS APPLIED
DC VOLTS APPLIED
VOLTAGE COEFFICIENT OF CAPACITANCE
10
% CAPACITANCE CHANGE
0
- 10
- 20
- 30
- 40
- 50
2000 V RATED
- 60
1000 V/1500 V RATED
- 70
- 80
0
500
1000
1500
2000
2500
DC VOLTS APPLIED
Revision: 01-Aug-14
Document Number: 45198
78
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ OMD Series
www.vishay.com
Vishay Vitramon
BOARDFLEX SENSITIVE APPLICATIONS - SOLUTION
A predominant failure mode in multilayer ceramic chip capacitors is cracking caused by board flexure. Cracks can then create
a path for current to pass from one electrode through the dielectric to an opposing electrode or from the terminations at one
end of the MLCC through the dielectric to an opposing electrode. This may subsequently result in capacitance loss, leakage low Insulation Resistance (IR) - and / or more seriously, high current shorts. A short circuit condition in the surface mounted
capacitors can cause further failures of downstream components. Vishay’s Open Mode Design Capacitors (VJ OMD - Cap.
series) reduce the risk of these destructive conditions through MLCC designs that prevent board flexure cracks reaching the
opposing electrode.
VJ OMD - Cap. MLCCs reduce the risk of early field failures associated with board flex cracks. However, it is important to note
that even in the open mode designs the presence of flexure related cracks can cause capacitance loss leading to localized
stresses on the parts. eventually, depending on the application environment, including such factors and high voltage pulse
frequency and thermal cycling this may lead to internal breakdown of the component.
POLYMER TERMINATION
Polymer termination provides additional protection against board flexure damage by absorbing greater mechanical and thermal
stresses. Components can be packaged, transported, stored and handled the same standard terminated product. Wave and
reflow soldering of MLCC does not require modification to equipment and / or process. Polymer termination greatly reduces the
risk of mechanical cracking however it does not completely eliminate.
STANDARD TERMINATION
OMD CAP PLUS POLYMER TERMINATION
Exposed Electrodes = Electrical Short
No Exposed Electrodes = No Electrical Short
STANDARD PACKAGING QUANTITIES (1)(2)(3)
CASE
CODE
TAPE
SIZE
0805 (4)
1206 (4)
1210 (4)
1808 (4)
1812 (4)
1825
2220
2225
8 mm
8 mm
8 mm
12 mm
12 mm
12 mm
12 mm
12 mm
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
PAPER TAPE PACKAGING
PLASTIC TAPE
PAPER TAPE
CODE “C” / “O”
PACKAGING CODE “T” PACKAGING CODE “P” / “I”
3000
3000
10 000
n/a
2500 / 3000
n/a
n/a
2000 / 2500 / 3000
n/a
n/a
2000
n/a
n/a
1000
n/a
n/a
1000
n/a
n/a
1000
n/a
n/a
1000
n/a
PLASTIC TAPE
PACKAGING CODE “R”
10 000
9000 / 10 000
9000 / 10 000
10 000
4000
4000
4000
4000
Notes
(1) Vishay Vitramon uses embossed plastic, and punch paper carrier tapes. Paper tape is not available for case sizes  1206 or for component
thickness > 0.035" (0.89 mm)
(2) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(3) n/a = not available
(4) Packaging code “C / O”, “P / I” and lower quantities can depend from product thickness
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 01-Aug-14
Document Number: 45198
79
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
Prohibit Surface Arc-Over in High-Voltage Applications
FEATURES
For this Worldwide Patented Technology
• Specialty: high-voltage applications
• MLCC that protects against surface arc-over
• Excellent high-voltage performance
• Higher capacitances and smaller case sizes that
save board space, as compared to standard
Available
high-voltage MLCCs
• Voltage breakdowns as much as twice that of competitors’ products
• Available with polymer termination for increase resistance to
board flex cracking. Please contact factory for availability
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
•
•
•
•
Power supplies
DC/DC converters (buck and boost)
Voltage multipliers for flyback converters
For lighting and other AC applications please contact:
[email protected]
ELECTRICAL SPECIFICATIONS
C0G (NP0)
X7R
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 10 pF to 8.2 nF
Capacitance Range: 220 pF to 270 nF
Voltage Range: 1000 VDC to 2500 VDC
Voltage Range: 250 VDC to 1000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Temperature Coefficient of Capacitance (TCC):
± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values  1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Dissipation Factor (DF):
2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
150 % of rated voltage
1000 VDC-rated:
1500 VDC, 2500 VDC-rated:
120 % of rated voltage
Revision: 05-Nov-14
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
200 % of rated voltage
 250 VDC-rated:
500 VDC-rated:
min. 150 % of rated voltage
630 VDC, 1000 VDC-rated: min. 120 % of rated voltage
Document Number: 45197
80
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
CASE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
0805
1500
10 pF
390 pF
1206
1500
10 pF
1.5 nF
1210
1500
10 pF
2.7 nF
2220
1500
470 pF
5.6 nF
2225
2500
470 pF
8.2 nF
0805
1000
470 pF
3.3 nF
1206
1000
220 pF
47 nF
1210
1000
220 pF
82 nF
1808
1000
220 pF
100 nF
1812
1000
220 pF
270 nF
C0G (NP0)
X7R
Note
• Detail ratings see “Selection Chart”
ORDERING INFORMATION
(4)
VJ0805
A
101
J
X
G
A
T
5Z (2)
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL
CODE
CAPACITANCE
TOLERANCE
TERMINATION
DC
VOLTAGE
RATING (1)
MARKING
PACKAGING
PROCESS
CODE
0805
1206
1210
1808
1812
2220
2225
A = C0G
(NP0)
Y = X7R
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Examples
102 = 1000 pF
223 = 22 000 pF
J=±5%
K = ± 10 %
M = ± 20 %
X = Ni barrier
100 % matte tin
plate finish
F, E = AgPd (3)
B = polymer
100 % matte tin
plate finish (4)
P = 250 V
E = 500 V
L = 630 V
G = 1000 V
R = 1500 V
O = 2500 V
A=
unmarked
(6)
5Z / 5ZL (5) =
HVArc
Guard®
T = 7" reel / plastic tape
R = 11 1/4" / 13" reel / plastic tape
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
(2) Process code has to be added.
(3) Termination code “E” is for conductive epoxy assembly, contact [email protected] for availability.
(4) Please contact factory for polymer termination availability
(5) “5ZL” mandatory for size 1206 / 1210 in C0G (NP0) with 1000 V / 1500 V for capacitance < 100 pF and used for other specific part numbers,
consult for questions [email protected].
(6) Other termination options contact [email protected] for availability.
ENVIRONMENTAL STATUS
TERMINATION CODE
TERMINATION DESCRIPTION
RoHS COMPLIANT
X
Ni barrier 100 % tin plated matte finish
Yes
VISHAY GREEN
Yes / No (1)
E
AgPd
Yes
Yes / No (1)
B
Polymer layer, 100 % tin plated matte finish
Yes
No
F
AgPd
Yes
No
Note
(1) “No” for size 1206 / 1210 in C0G (NP0) with 1000 V / 1500 V for capacitance < 100 pF.
Revision: 05-Nov-14
Document Number: 45197
81
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
CASE
CODE
STYLE
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
TERMINATION PAD
(P)
MINIMUM
MAXIMUM
0805
VJ0805
0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.020)
0.057 (1.45)
0.010 (0.25)
0.028 (0.71)
1206
VJ1206
0.126 ± 0.008
(3.20 ± 0.20)
0.063 ± 0.008
(1.60 ± 0.20)
0.067 (1.70)
0.010 (0.25)
0.030 (0.76)
1210
VJ1210
0.126 ± 0.008
(3.20 ± 0.20)
0.098 ± 0.008
(2.50 ± 0.020)
0.067 (1.70)
0.010 (0.25)
0.030 (0.76)
1808
VJ1808
0.180 ± 0.012
(4.57 ± 0.30)
0.080 ± 0.010
(2.03 ± 0.25)
0.067 (1.70)
0.010 (0.25)
0.030 (0.76)
1812
VJ1812
0.177 ± 0.012
(4.50 ± 0.30)
0.126 ± 0.008
(3.20 ± 0.20)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
2220
VJ2220
0.220 ± 0.010
(5.59 ± 0.25)
0.200 ± 0.010
(5.08 ± 0.25)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
2225
VJ2225
0.220 ± 0.010
(5.59 ± 0.25)
0.250 ± 0.010
(6.35 ± 0.25)
0.090 (2.30)
0.010 (0.25)
0.030 (0.76)
Note
• Polymer (B-termination) have increased dimensions:
part length increased by 0.006" (0.15 mm)
Revision: 05-Nov-14
Document Number: 45197
82
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
SELECTION CHART C0G (NP0)
DIELECTRIC
C0G (NP0)
STYLE
VJ0805
CASE CODE
VJ1206
0805
VOLTAGE (VDC)
VOLTAGE CODE
(1)
VJ1210 (1)
1206
VJ2220 (1)
1210
VJ2225 (1)
2220
2225
1000
1500
1000
1500
1000
1500
1000
1500
1000
1500
2500
G
R
G
R
G
R
G
R
G
R
O
CAP. CODE
CAP.
100
10 pF
•
•
•
•
•
•
120
12 pF
•
•
•
•
•
•
150
15 pF
•
•
•
•
•
•
180
18 pF
•
•
•
•
•
•
220
22 pF
•
•
•
•
•
•
270
27 pF
•
•
•
•
•
•
330
33 pF
•
•
•
•
•
•
390
39 pF
•
•
•
•
•
•
470
47 pF
•
•
•
•
•
•
560
56 pF
•
•
•
•
•
•
680
68 pF
•
•
•
•
•
•
820
82 pF
•
•
•
•
•
•
101
100 pF
•
•
•
•
•
•
121
120 pF
•
•
•
•
•
•
151
150 pF
•
•
•
•
•
•
181
180 pF
•
•
•
•
•
•
221
220 pF
•
•
•
•
•
•
271
270 pF
•
•
•
•
•
•
331
330 pF
•
•
•
•
•
•
391
390 pF
•
•
•
•
•
•
471
470 pF
•
•
•
•
•
•
•
•
•
561
560 pF
•
•
•
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
682
6.8 nF
•
•
•
822
8.2 nF
•
•
•
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
• Available in plastic carrier tape only
RoHS-compliant
Revision: 05-Nov-14
Document Number: 45197
83
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
SELECTION CHART X7R
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
683
68 nF
823
82 nF
104
100 nF
124
120 nF
154
150 nF
184
180 nF
224
220 nF
274
270 nF
334
330 nF
VJ0805
0805
630 1000 250
L
G
P
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1206 (1)
1206
500 630 1000 250
E
L
G
P
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
X7R
VJ1210 (1)
1210
500 630 1000 250
E
L
G
P
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1808 (1)
1808
500 630 1000 250
E
L
G
P
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1812 (1)
1812
500 630 1000
E
L
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
• Available in plastic carrier tape only
RoHS-compliant
Revision: 05-Nov-14
Document Number: 45197
84
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
HVArc Guard® C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
MINIMUM INSULATION RESISTANCE VS. TEMPERATURE
TEMPERATURE COEFFICIENT OF CAPACITANCE
10 000
1.5
INSULATION RESISTANCE
(ΩF)
% CAPACITANCE CHANGE
2.0
1.0
1000
0.5
0.0
-0.5
NP0
-1.0
-1.5
100
10
-2.0
-75
-50
-25
0
25
50
75
100 125
25
10
100 125
TEMPERATURE °C
TEMPERATURE °C
AGING RATE
VOLTAGE COEFFICIENT OF CAPACITANCE
0.2
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
0.2
0.1
0.0
-0.1
- 0.2
0.1
0.0
-0.1
-0.2
1
10
100
1000
10 000
0
10
20
HOURS
30
40
50
60
70
80
90
100
DC VOLTS APPLIED
IMPEDANCE VS. FREQUENCY OF 1206 NP0 HVArc Guard®
1000
IMPEDANCE (Ω)
100
470 pF
10
1000 pF
1
0.1
0.01
1
10
100
1000
FREQUENCY (MHz)
Revision: 05-Nov-14
Document Number: 45197
85
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
HVArc Guard® X7R DIELECTRIC - TYPICAL PARAMETERS
MINIMUM INSULATION
RESISTANCE VS. TEMPERATURE
TEMPERATURE COEFFICIENT OF CAPACITANCE
10 000
INSULATION RESISTANCE (ΩF)
% CAPACITANCE CHANGE
15
10
5
0
-5
-10
-15
-20
1000
100
10
-100
-50
0
50
100
150
10
25
TEMPERATURE °C
DISSIPATION FACTOR VS. TEMPERATURE
AGING RATE
3.0
% DISSIPATION FACTOR
1.0
% CAPACITANCE CHANGE
100 125
TEMPERATURE °C
0.0
-1.0
-2.0
-3.0
-4.0
1
10
100
1000
10 000
2.5
2.0
1.5
1.0
0.5
0
-100
-50
HOURS
50
100
150
IMPEDANCE VS. FREQUENCY
OF 1206 HVArc Guard® CAPACITORS
100
IMPEDANCE (Ω)
0
TEMPERATURE °C
10
33 nF 22 nF 15 nF
1
0.1
0.01
1
Revision: 05-Nov-14
10
100
FREQUENCY (MHz)
1000
Document Number: 45197
86
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HVArc Guard®
www.vishay.com
Vishay Vitramon
TYPICAL C0G (NP0) VOLTAGE BREAKDOWN
TYPICAL X7R VOLTAGE BREAKDOWN
1000 V
AVERAGE VOLTAGE
BREAKDOWN (VDC)
3000
2900
2800
2700
2600
2500
2400
2300
2200
2100
2000
TYPICAL X7R VOLTAGE BREAKDOWN
(n = 50, 500 V/s applied)
1500 V
3500
3000
2500
2000
1500
1000
500
0
PART RATED VOLTAGE
HVArc Guard®
250 VDC
500 VDC
HVArc Guard®
Competitor
AVERAGE VOLTAGE
BREAKDOWN (VDC)
TYPICAL C0G (NP0) VOLTAGE BREAKDOWN
(n = 50, 500 V/s applied)
1000 VDC
PART RATED VOLTAGE
TYPICAL
ARCING ON MLCCS (shown in polarized light)
Crack caused by surface arc from end termination to top electrode
layer cause component failure
Corona traces due to arc-over become conductive paths leading to
component failure
APPLICATION NOTE
•
•
•
•
Suitable only for transient voltage and not for periodical pulse(s) chain
1000 V rated parts are not suitable for AC / lighting applications above 220 VAC
500 V and 630 V are not suitable for AC / lighting applications above 110 VAC
If further questions, please contact: [email protected]
STANDARD PACKAGING QUANTITIES
CASE CODE
TAPE SIZE
0805
1206 (4)
1210 (4)
1808
1812
2220
2225
8 mm
8 mm
8 mm
12 mm
12 mm
12 mm
12 mm
(1)(2)(3)
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
PLASTIC TAPE PACKAGING CODE
“T”
3000
2500
2500
2000
1000
1000
1000
PLASTIC TAPE PACKAGING CODE
“R”
10 000
10 000
10 000
10 000
4000
4000
4000
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape
(2) 11 1/4" reel is standard for large quantities. 13" is maybe used for large “T” dimension parts
(3) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(4) Packaging quantity can vary with product thickness
Contact [email protected] with respect to specific part number requirements
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 05-Nov-14
Document Number: 45197
87
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Source Energy Capacitor (SEC)
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Capacitors
for Pulse Current Applications
FEATURES
• Low electrostrictive ceramic formulation for
repeated charge and discharge cycles
• High pulse discharge currents
Available
Available
• Excellent reliability and high voltage performance
• Available with tin / lead barrier termination (code “L”)
• Wet built process
• Reliable Noble Metal Electrode (NME) system
• Made with a combination of design, materials and tight
process control to achieve very high field reliability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATIONS
• Power supplies
• Converters
• Voltage multipliers
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Aging Rate: 1 % maximum per decade
Capacitance Range: 4.7 nF to 560 nF
Insulation Resistance (IR):
at +25 °C and rated voltage: 100 000 M minimum or
1000 F, whichever is less
at +125 °C and rated voltage: 10 000 M minimum or
100 F, whichever is less
Voltage Range: 1000 VDC, 1500 VDC
Temperature Coefficient of Capacitance (TCC):
X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
2.5 % max. at 1.0 VRMS and 1 kHz
Revision: 10-Feb-15
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages:
1000 VDC / 1500 VDC-rated: min. 120 % of rated voltage
Document Number: 45210
88
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Source Energy Capacitor (SEC)
www.vishay.com
Vishay Vitramon
DIMENSIONS in inches [millimeters]
W
L
T
MAX.
P
TERMINATION
(P)
PART
ORDERING
NUMBER
LENGTH
(L)
WIDTH
(W)
MAXIMUM THICKNESS
(T)
MINIMUM
MAXIMUM
1812
VJ1812
0.177 ± 0.012
[4.50 ± 0.30]
0.126 ± 0.008
[3.20 ± 0.20]
0.086
[2.18]
0.010
[0.25]
0.030
[0.76]
1825
VJ1825
0.177 ± 0.012
[4.50 ± 0.30]
0.252 ± 0.010
[6.40 ± 0.25]
0.086
[2.18]
0.010
[0.25]
0.030
[0.76]
2225
VJ2225
0.220 ± 0.010
[5.59 ± 0.25]
0.250 ± 0.010
[6.35 ± 0.25]
0.086
[2.18]
0.010
[0.25]
0.030
[0.76]
3040
VJ3040
0.300 ± 0.015
[7.62 ± 0.38]
0.400 ± 0.015
[10.20 ± 0.38]
0.100
[2.54]
0.010
[0.25]
0.030
[0.76]
3640
VJ3640
0.360 ± 0.015
[9.14 ± 0.38]
0.400 ± 0.015
[10.20 ± 0.38]
0.010
[0.25]
0.030
[0.76]
4044
VJ4044
0.400 ± 0.015
[10.16 ± 0.38]
0.440 ± 0.015
[11.17 ± 0.38]
0.020
[0.50]
0.040
[1.00]
CASE CODE
0.130 (1)
[3.30]
0.120
[3.05]
0.120
[3.05]
Note
(1) Thickness used for 3640 - 1500 V - 220 nF and 270 nF
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
CASE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
1812
1500
4.7 nF
27 nF
1825
1500
10 nF
56 nF
2225
1500
18 nF
100 nF
3040
1500
33 nF
220 nF
3640
1500
47 nF
330 nF
4044
1500
100 nF
560 nF
X7R (X5P)
Note
• Detail ratings see “Selection Chart”
ORDERING INFORMATION
VJ3640
Y
184
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL CODE
1812
1825
2225
3040
3640
4044
Y = X7R
Expressed in
picofarads (pF).
The first two digits
are significant,
the third is a
multiplier.
Examples:
184 = 180 000 pF
K
X
R
A
CAPACITANCE TERMINATION DC VOLTAGE
TOLERANCE
RATING (1)
J=±5%
K = ± 10 %
M = ± 20 %
X = Ni barrier
100 % tin
matte plated
L = Ni barrier
with tin lead
plated finish
min. 4 % lead
G = 1000 V
R = 1500 V
MARKING
A = unmarked
T
SE
PACKAGING (3) PROCESS
CODE (2)
T = 7" reel /
plastic tape
J = 7" reel /
plastic tape
(low quantity)
Notes
(1) DC voltage rating should not be exceeded in application.
(2) Process code with 2 digits has to be added.
(3) All types of packaging may not be available for all case sizes, see table end of this datasheet.
Revision: 10-Feb-15
Document Number: 45210
89
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Source Energy Capacitor (SEC)
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
VJ1812 (1)
STYLE
CASE CODE
VJ1825 (1)
1812
VJ2225 (1)
1825
VJ3040 (1)
2225
VJ3640 (1)
3040
VJ4044 (1)
3640
4044
VOLTAGE (VDC)
1000
1500
1000
1500
1000
1500
1000
1500
1000
1500
1000
1500
VOLTAGE CODE
G
R
G
R
G
R
G
R
G
R
G
R
CAP. CODE
CAP.
332
3.3 nF
392
3.9 nF
472
4.7 nF
•
562
5.6 nF
•
682
6.8 nF
•
•
822
8.2 nF
•
•
103
10 nF
•
•
123
12 nF
•
•
153
15 nF
•
•
•
•
183
18 nF
•
•
•
•
223
22 nF
•
•
•
273
27 nF
•
•
•
•
•
333
33 nF
•
•
•
•
•
393
39 nF
•
•
•
•
•
473
47 nF
•
•
•
•
•
563
56 nF
•
•
•
•
•
•
683
68 nF
•
•
•
•
•
823
82 nF
•
•
•
104
100 nF
•
•
•
•
•
•
124
120 nF
•
•
•
•
•
154
150 nF
•
•
•
•
•
184
180 nF
•
•
•
•
•
224
220 nF
•
•
•
•
•
274
270 nF
•
•
•
•
334
330 nF
•
•
•
394
390 nF
•
474
470 nF
•
564
560 nF
•
684
680 nF
824
820 nF
105
1000 nF
•
•
•
•
•
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic tape
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
Revision: 10-Feb-15
Document Number: 45210
90
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Source Energy Capacitor (SEC)
www.vishay.com
Vishay Vitramon
TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
20
0
15
-10
Δ CAPACITANCE (%)
Δ CAPACITANCE (%)
VOLTAGE COEFFICIENT OF CAPACITANCE
10
4044, 330 nF, 1500 V
-20
-30
-40
3640, 180 nF, 1500 V
-50
-60
X7R: ± 15 % from -55 °C to 125 °C
3640, 180 nF, 1500 V
10
5
0
TCC also meets X5P
± 10 % from
-55 °C to +85 °C
-5
-10
4044, 330 nF, 1500 V
-15
-70
-80
-20
0
250
500
750
1000 1250
APPLIED VOLTAGE (VDC)
-75 -55 -35 -15 5 25 45 65
TEMPERATURE (°C)
1500
DISCHARGE PULSE OF 330 nF, 4044 SEC
PEAK DISCHARGE CURRENT (A)
DISCHARGE CURRENT VS. CHARGE VOLTAGE
2500
4044, 330 nF, 1500 V
3040, 120 nF, 1500 V
2225, 100 nF, 1000 V
1825, 56 nF, 1000 V
1812, 27 nF, 1000 V
2000
1500
1000
500
0
600
DISSIPATION FACTOR VS. TEMPERATURE
1400
60
0.035
4044
TEMPERATURE (°C)
DISSIPATION FACTOR
800
1000
1200
CHARGE VOLTAGE (VDC)
TEMPERATURE VS. RIPPLE CURRENT
0.040
0.030
0.025
0.020
85 105 125
3640
0.015
0.010
0.005
0.000
50
40
30
20
1825, 27 nF, 1000 V tested at 240 kHz
1825, 56 nF, 1000 V tested at 120 kHz
2225, 100 nF, 1000 V tested at 60 kHz
10
0
-55
Revision: 10-Feb-15
-35
-15
5
25
45
TEMPERATURE (°C)
65
85
0
0.1
0.2
0.3
0.4
0.5
CURRENT (A)
0.6
0.7
Document Number: 45210
91
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Source Energy Capacitor (SEC)
www.vishay.com
Vishay Vitramon
STANDARD PACKAGING QUANTITIES
7" REEL QUANTITIES
CASE CODE
TAPE SIZE
PLASTIC TAPE
PACKAGING CODE “T”
LOW QUANTITY
PACKAGING CODE “J”
1812
12 mm
1000
500
1825
12 mm
1000
500
2225
12 mm
1000
500
3040
16 mm
500
n/a
3640
16 mm
500
n/a
4044
24 mm
300
n/a
Notes
• Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
• n/a = not available
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 10-Feb-15
Document Number: 45210
92
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Controlled Discharge Capacitor (CDC)
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
with Integrated Resistor for High Pulse Current Applications
FEATURES
• Integrated resistor on the surface of the
capacitor
• Low electrostrictive ceramic formulation for
repeated charge and discharge cycles
Available
Available
• High pulse discharge currents
• Excellent reliability and high voltage performance
• Available with tin / lead barrier termination (code “L”)
• Wet built process
• Reliable Noble Metal Electrode (NME) system
• Made with a combination of design, materials and tight
process control to achieve very high field reliability
• Resistor glass overglaze contains lead
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATIONS
• Detonation devices (munitions, pyrotechnic, blasting)
• Down hole drilling
• Electronic fuzing
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Aging Rate: 1 % maximum per decade
Capacitance Range: 33 nF to 560 nF
Insulation Resistance (IR):
at +25 °C without resistor: 100 000 M minimum or 1000 F,
whichever is less.
at +125 °C without resistor: 10 000 M minimum or 100 F,
whichever is less.
Voltage Range: 1000 VDC to 1500 VDC
Temperature Coefficient of Capacitance (TCC):
X5P: ± 10 % from -55 °C to +85 °C, with 0 VDC applied
X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied
Parallel Resistor: 500 M ± 30 %
Dissipation Factor (DF):
2.5 % maximum at 1.0 VRMS and 1 kHz
Revision: 10-Feb-15
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages:
1000 VDC / 1500 VDC-rated: 120 % of rated voltage
Document Number: 45203
93
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Controlled Discharge Capacitor (CDC)
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
CASE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
3040
1500
33 nF
220 nF
3640
1500
47 nF
330 nF
4044
1500
100 nF
560 nF
X7R (X5P)
Note
• Detail ratings see “Selection Chart”
ORDERING INFORMATION
VJ3640 (3)
Y
184
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL CODE
3040
3640
4044
Y = X7R
(X5P)
Expressed in
picofarads (pF).
The first two digits
are significant,
the third is a
multiplier.
Examples:
184 = 180 nF
334 = 330 nF
K
X
R
A
CAPACITANCE TERMINATION DC VOLTAGE
TOLERANCE
RATING (1)
J=±5%
K = ± 10 %
M = ± 20 %
X = Ni barrier
100 % tin plate
matte finish
L = Ni barrier
with tin lead
plated finish
min. 4 % lead
G = 1000 V
R = 1500 V
T
8R (2)
MARKING
PACKAGING PROCESS
CODE
A = unmarked
T = 7" reel / plastic tape
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance
Consult for questions: [email protected]
(2) Process Code must be added to control special requirements
(3) Size designator may be replaced by four digit drawing number used to control non-standard products and / or special requirements
DIMENSIONS in inches [millimeters]
W
L
T
MAX.
P
TERMINATION
(P)
PART
ORDERING
NUMBER
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
3040
VJ3040
0.300 ± 0.015
[7.62 ± 0.38]
0.400 ± 0.015
[10.20 ± 0.38]
0.100
[2.54]
0.010
[0.25]
0.030
[0.76]
3640
VJ3640
0.360 ± 0.015
[9.14 ± 0.38]
0.400 ± 0.015
[10.20 ± 0.38]
0.010
[0.25]
0.030
[0.76]
4044
VJ4044
0.400 ± 0.015
[10.16 ± 0.38]
0.440 ± 0.015
[11.17 ± 0.38]
0.020
[0.50]
0.040
[1.00]
CASE CODE
0.120
[3.05]
0130 (1)
[3.30]
0.120
[3.05]
Note
Thickness used for 3640 - 1500 V - 220 nF and 270 nF
(1)
Revision: 10-Feb-15
Document Number: 45203
94
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Controlled Discharge Capacitor (CDC)
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R (X5P)
VJ3040 (1)
STYLE
CASE CODE
VJ3640 (1)
3040
VJ4044 (1)
3640
4044
VOLTAGE (VDC)
1000
1500
1000
1500
1000
1500
VOLTAGE CODE
G
R
G
R
G
R
CAP. CODE
CAP.
223
0.022 μF
273
0.027 μF
333
0.033 μF
•
393
0.039 μF
•
473
0.047 μF
•
•
563
0.056 μF
•
•
•
683
0.068 μF
•
•
•
823
0.082 μF
•
•
104
0.10 μF
•
•
•
•
124
0.12 μF
•
•
•
•
154
0.15 μF
•
•
•
•
•
184
0.18 μF
•
•
•
•
•
224
0.22 μF
•
•
•
•
•
274
0.27 μF
•
•
•
•
334
0.33 μF
•
•
•
394
0.39 μF
•
474
0.47 μF
•
564
0.56 μF
•
684
0.68 μF
824
0.82 μF
105
1.0 μF
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
•
•
•
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic tape
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
CONSTRUCTION
Surface mount multilayer
ceramic chip capacitor
Over glaze: Resistor passivation to
protect against contamination and
increase electrical stability
Resistor: Thick film print
Revision: 10-Feb-15
Document Number: 45203
95
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Controlled Discharge Capacitor (CDC)
www.vishay.com
Vishay Vitramon
TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
20
0
15
-10
CAPACITANCE (%)
10
4044, 330 nF, 1500 V
-20
-30
-40
3640, 180 nF, 1500 V
-50
-60
X7R: ± 15 % from -55 °C to +125 °C
3640, 180 nF, 1500 V
10
5
0
-5
TCC also meets X5P
± 10 % from -55 °C to +85 °C
-10
-70
-15
-80
-20
-75 -55 -35 -15 5 25 45 65 85 105 125
TEMPERATURE (°C)
0
250
500
750 1000 1250
APPLIED VOLTAGE (VDC)
1500
DISCHARGE PULSE OF 4044 CDC
Peak current:
> 1700 Ap
Rise time
79 ns
4044, 330 nF, 1500 V
DISCHARGE CURRENT VS. CHARGE VOLTAGE
PULSE DISCHARGE CURRENT (A)
CAPACITANCE (%)
VOLTAGE COEFFICIENT OF CAPACITANCE
2000
Above 1200 V, excessive dV/dt
1800 may cause failure
4044, 330 nF
1600
1400
3640, 274 nF
1200
3640, 180 nF
1000
800
600
900
% DISSIPATION FACTOR
0.035
4044, 330 nF, 1500 V
0.030
0.025
0.020
0.015
0.010
0.005
3640, 180 nF, 1500 V
0.000
-55 -35 -15
Revision: 10-Feb-15
-5 25 45 65 85 105 125
TEMPERATURE (°C)
1500
SELF DISCHARGE VS. TIME
DISCHARGE VOLTAGE (VDC)
DISSIPATION FACTOR VS. TEMPERATURE
0.040
1000 1100 1200 1300 1400
CHARGE VOLTAGE (VDC)
1400
Capacitor (no resistor)
1200
1000
800
Vc = Vo x ε-t/rc
600
400
CDC, 500 MΩ resistor
200
0
0
100 200 300 400 500 600 700 800 900
TIME (s)
Document Number: 45203
96
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Controlled Discharge Capacitor (CDC)
www.vishay.com
Vishay Vitramon
STANDARD PACKAGING QUANTITIES
(1)(2)(3)
7" REEL QUANTITIES
CASE CODE
TAPE SIZE
PLASTIC TAPE PACKAGING CODE
“T”
3040
16 mm
500
3640
16 mm
500
4044
24 mm
300
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape
(2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(3) n/a = not available
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to +40 °C ambient temperature and  70 % related humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 10-Feb-15
Document Number: 45203
97
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Safety Certified Capacitors C0G (NP0)
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Safety Certified Applications
FEATURES
• Approved IEC 60384-14
• Specialty: safety certified capacitors
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• Power supplies
• Facsimile and telephone
• AC equipment and appliances
• Lighting strike and voltage surge protection
• EMI and AC line filtering
• Isolators
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range X1 / Y2 (1): 10 pF to 1.0 nF
Capacitance Range X2 (1): 10 pF to 470 pF
Voltage Range: 250 VAC
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 0 % maximum per decade
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Voltage Proof Test:
X1 / Y2: 1500 VAC (RMS), 60 s ± 1 s
X2: 1075 VDC, 60 s ± 1 s
Dissipation Factor (DF) (1):
0.1 % maximum for values  1000 pF at 1.0 VRMS at 1 MHz
or per IEC 60384-14 at 1.0 VRMS at 10 kHz
Peak Impulse Voltage:
X1 / Y2: 5000 V
X2: 2500 V
Climatic Category According to EN 60068-1:
55/125/21
Note
(1) Test conditions per IEC 60384-14:
Voltage: 1.0 VRMS
Capacitance: C  100 pF at 1 MHz and C > 100 pF at 1 kHz
Revision: 09-Sep-14
Document Number: 45007
98
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Safety Certified Capacitors C0G (NP0)
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
CASE
MAXIMUM VOLTAGE
(VAC)
MINIMUM
MAXIMUM
2008
250
10 pF
220 pF
2012
250
18 pF
470 pF
2220
250
47 pF
1.0 nF
2008
250
10 pF
390 pF
2012
250
18 pF
470 pF
C0G (NP0) (X1 / Y2)
C0G (NP0) (X2)
Notes
• Detail ratings see “Selection Chart”
• Size 2008 and 2012 are compatible with 1808 and 1812 solderlands and full conform with the IEC-60384-14 requirements for creepage
distance
ORDERING INFORMATION
VJ2008
A
101
K
X
U
S
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION
AC VOLTAGE
RATING
MARKING
2008
2012
2220
A = C0G (NP0)
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a multiplier.
Examples:
101 = 100 pF
J=±5%
K = ± 10 %
X = Ni barrier
100 % tin plated
U = 250 VAC
S = marked
(see Part Marking
table below)
### (1)
T
PACKAGING PROCESS
CODE
X1 = X1 /
Y2
X2 = X2
T = 7" reel/plastic tape
R = 11 1/4"/13" reel/plastic tape
Notes
(1) Process code must be added to control products and requirements
• Detail ratings see “Selection Chart”
PART MARKING
1ST DIGIT
MANUFACTURER
MARKING
VC
2ND DIGIT
DIELECTRIC AND RATING
C = C0G/NP0, X1/Y2
V = Vishay
VT
T = C0G/NP0, X2
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
TERMINATION
(P)
PART
ORDERING
NUMBER
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
2008
VJ2008
0.200 ± 0.010
(5.08 ± 0.25)
0.080 ± 0.010
(2.03 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
2012
VJ2012
0.200 ± 0.010
(5.08 ± 0.25)
0.126 ± 0.008
(3.20 ± 0.20)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
2220
VJ2220
0.220 ± 0.008
(5.59 ± 0.20)
0.200 ± 0.010
(5.08 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
CASE CODE
Revision: 09-Sep-14
Document Number: 45007
99
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Safety Certified Capacitors C0G (NP0)
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0) (X1/Y2)
C0G (NP0) (X2)
VJ2008 (1)
VJ2012 (1)
VJ2220 (1)
VJ2008 (1)
VJ2012 (1)
CASE CODE
2008
2012
2220
2008
2012
VOLTAGE (VAC)
250
250
250
250
250
U
U
U
U
U
STYLE
VOLTAGE CODE
CAP. CODE
CAP.
100
10 pF
•
•
120
12 pF
•
•
150
15 pF
•
180
18 pF
•
•
•
•
220
22 pF
•
•
•
•
270
27 pF
•
•
•
•
330
33 pF
•
•
•
•
390
39 pF
•
•
•
•
470
47 pF
•
•
•
•
•
560
56 pF
•
•
•
•
•
680
68 pF
•
•
•
•
•
820
82 pF
•
•
•
•
•
101
100 pF
•
•
•
•
•
121
120 pF
•
•
•
•
•
151
150 pF
•
•
•
•
•
181
180 pF
•
•
•
•
•
221
220 pF
•
•
•
•
•
271
270 pF
•
•
•
•
331
330 pF
•
•
•
•
391
390 pF
•
•
•
•
471
470 pF
•
•
561
560 pF
•
681
680 pF
•
821
820 pF
•
102
1.0 nF
•
122
1.2 nF
152
1.5 nF
182
1.8 nF
•
•
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
RoHS-compliant
PACKAGING QUANTITIES
(1)
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
TAPE SIZE
PACKAGING CODE
“T”
PACKAGING CODE
“R”
2008
12 mm
2000
10 000
2012
12 mm
1000
4000
2220
12 mm
1000
4000
CASE CODE
Note
(1) Reference: EIA standard RS481 - “Taping of Surface Mount Components for Automatic Placement”
Revision: 09-Sep-14
Document Number: 45007
100
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Safety Certified Capacitors C0G (NP0)
www.vishay.com
Vishay Vitramon
APPROVALS
IEC 60384-14 - Safety tests
CB test certificates:
X1/Y2-capacitor:
DE1-51726
10 pF to 1000 pF
250 VAC
X2-capacitor:
DE1-51726
10 pF to 470 pF
250 VAC
DIN EN 60384-14 (VDE 0565 Teil 1-1):2006-04; EN 60384-14:2005-08; IEC 60384-14 (ed.3)
X1/Y2-capacitor:
70001064
10 pF to 1000 pF
250 V~
X2-capacitor:
70001064
10 pF to 470 pF
250 V~
CAN/CSA-E60384-14:09 and ANSI/UL 60384-14-2009
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 09-Sep-14
Document Number: 45007
101
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Safety Certified Capacitors X7R
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Safety Certified Applications
FEATURES
• Approved IEC 60384-14
• Specialty: safety certified capacitors
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
APPLICATIONS
• Power supplies
• Facsimile and telephone
• AC equipment and appliances
• Lighting strike and voltage surge protection
• EMI and AC line filtering
• Isolators
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range X1 / Y2 (1): 82 pF to 4.7 nF
Capacitance Range X2 (1): 82 pF to 12 nF
Voltage Range: 250 VAC
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Temperature Coefficient of Capacitance (TCC):
± 15 % from -55 °C to +125 °C, with 0 VDC applied
Voltage Proof Test:
X1 / Y2: 1500 VAC (RMS), 60 s ± 1 s
X2: 1075 VDC, 60 s ± 1 s
Dissipation Factor (DF) (1):
2.5 % maximum at 1.0 VRMS at 1 kHz
or per IEC 60384-14 at 1.0 VRMS at 10 kHz
Peak Impulse Voltage:
X1 / Y2: 5000 V
X2: 2500 V
Climatic Category According to EN60068-1:
55/125/21
Note
(1) Test conditions per IEC 60384-14:
Voltage: 1 VRMS
Capacitance: C  100 pF at 1 MHz and C > 100 pF at 1 kHz
Revision: 09-Sep-14
Document Number: 45020
102
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Safety Certified Capacitors X7R
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE
MAXIMUM VOLTAGE
(VAC)
2008
2012
X7R (X1 / Y2)
X7R (X2)
CAPACITANCE
MINIMUM
MAXIMUM
250
82 pF
1.0 nF
250
150 pF
1.2 nF
2220
250
270 pF
4.7 nF
2008
250
82 pF
2.7 nF
2012
250
150 pF
5.6 nF
2220
250
270 pF
12 nF
Notes
• Detail ratings see “Selection Chart”
• Size 2008 and 2012 are compatible with 1808 and 1812 solderlands and full conform with the IEC-60384-14 requirements for creepage
distance
ORDERING INFORMATION
VJ2008
Y
102
K
X
U
S
T
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION
AC VOLTAGE
RATING
MARKING
2008
2012
2220
Y = X7R
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a multiplier.
Examples:
102 = 1000 pF
K = ± 10 %
M = ± 20 %
X = Ni barrier
100 % tin plated
U = 250 VAC
S = marked
(see Part Marking
table below)
### (1)
PACKAGING PROCESS
CODE
X1 = X1 /
Y2
X2 = X2
T = 7" reel / plastic tape
R = 11 1/4" / 13" reel / plastic tape
Notes
(1) Process code must be added to control products and requirements
• Detail ratings see “Selection Chart”
PART MARKING
1ST DIGIT
MANUFACTURER
MARKING
VA
2ND DIGIT
DIELECTRIC AND RATING
A = X7R, X1 / Y2
V = Vishay
VM
M = X7R, X2
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
TERMINATION
(P)
PART
ORDERING
NUMBER
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
2008
VJ2008
0.200 ± 0.010
(5.08 ± 0.25)
0.080 ± 0.010
(2.03 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
2012
VJ2012
0.200 ± 0.010
(5.08 ± 0.25)
0.126 ± 0.008
(3.20 ± 0.20)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
2220
VJ2220
0.220 ± 0.008
(5.59 ± 0.20)
0.200 ± 0.010
(5.08 ± 0.25)
0.086
(2.18)
0.010
(0.25)
0.030
(0.76)
CASE CODE
Revision: 09-Sep-14
Document Number: 45020
103
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Safety Certified Capacitors X7R
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VAC)
VOLTAGE CODE
CAP. CODE
100
220
330
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
VJ2008 (1)
2008
250
U
CAP.
10 pF
22 pF
33 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
X7R (X1 / Y2)
VJ2012 (1)
2012
250
U
VJ2220 (1)
2220
250
U
•
•
•
•
•
•
•
•
•
•
•
•
VJ2008 (1)
2008
250
U
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
X7R (X2)
VJ2012 (1)
2012
250
U
VJ2220 (1)
2220
250
U
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
(1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034
RoHS-compliant
PACKAGING QUANTITIES
(1)
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
CASE CODE
TAPE SIZE
PACKAGING CODE
“T”
PACKAGING CODE
“R”
2008
12 mm
2000
10 000
2012
12 mm
1000
4000
2220
12 mm
1000
4000
Note
(1) Reference: EIA standard RS481 - “Taping of Surface Mount Components for Automatic Placement”
Revision: 09-Sep-14
Document Number: 45020
104
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Safety Certified Capacitors X7R
www.vishay.com
Vishay Vitramon
APPROVALS
IEC 60384-14 - Safety tests
CB test certificates:
X1 / Y2-capacitor:
DE1-52193
82 pF to 4700 pF
250 VAC
X2-capacitor:
DE1-52193
82 pF to 12 000 pF
250 VAC
DIN EN 60384-14 (VDE 0565 Teil 1-1):2006-04; EN 60384-14:2005-08; IEC 60384-14 (ed.3)
X1 / Y2-capacitor:
70001064
82 pF to 4700 pF
250 V~
X2-capacitor:
70001064
82 pF to 12 000 pF
250 V~
CAN/CSA-E60384-14:09 and ANSI/UL 60384-14-2009
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 09-Sep-14
Document Number: 45020
105
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
VJ HIFREQ Series .................. 107
QUAD HIFREQ Series ............ 117
VJ High Q............................... 130
VJ....W1BC High Q Dielectric 134
MLCCs
for
RF and
High Frequency
Applications
(NME Technology)
VJ....W1BC Ultra High Q /
Low ESR ................................ 140
VJ HIFREQ Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer
Ceramic Chip Capacitors for High Frequency
FEATURES
•
•
•
•
•
Case size 0402, 0603, 0805
High frequency
Ultra-stable dielectric material
Non-magnetic copper termination “C”
Lead (Pb)-free terminations code “X”
Available
Available
•
•
•
•
Tin/lead termination code “L”
Available
Surface mount, wet build process
Reliable Noble Metal Electrode (NME) system
Made with a combination of design, materials and tight
process control to achieve very high field reliability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATIONS
•
•
•
•
•
•
•
RF and microwave
Broadband communication
Satellite communication
Base stations
Medical instrumentation and test
Military devices (radar, communication, etc.)
Wireless devices
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at 25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Aging Rate: 0 % maximum per decade
Capacitance Range:
0402: 0.1 pF to 82 pF
0603: 0.1 pF to 470 pF
0805: 0.1 pF to 1.5 nF
Insulation Resistance (IR):
at +25 °C and rated voltage 100 000 M minimum or
1000 F, whichever is less
at +125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less
Voltage Rating: 25 VDC to 250 VDC
Temperature Coefficient of Capacitance (TCC):
C0G (D): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C with
zero (0) VDC applied
Dissipation Factor (DF):
C0G (D): 0.05 % max. at 1.0 VRMS and 1 MHz
for values  1000 pF
C0G (D): 0.05 % max. at 1.0 VRMS and 1 kHz
for values > 1000 pF
Revision: 27-Nov-14
Dielectric Strength Test:
performed per method 103 of EIA-198-2-E.
Applied test voltages:
 200 VDC-rated: min. 250 % of rated voltage
> 200 VDC-rated: min. 200 % of rated voltage
Document Number: 45071
107
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HIFREQ Series
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE
D = HIFREQ
0402
0603
0805
CAPACITANCE
MAXIMUM VOLTAGE
(V)
200
250
250
MINIMUM
0.1 pF
0.1 pF
0.1 pF
MAXIMUM
82 pF
470 pF
1.5 nF
Note
• For values below 0.4 pF, contact [email protected]
ORDERING INFORMATION
VJ0603
D
1R0
B
X
B
A
C
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION
DC VOLTAGE
RATING (1)
MARKING
PACKAGING
0402
0603
0805
D = HIFREQ
Expressed in
picofarads (pF).
The first two digits
are significant, the
third is a multiplier.
An “R” indicates a
decimal point.
Examples:
1R0 = 1.0 pF
V = ± 0.05 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
C = non-magnetic
copper barrier
100 % tin plate
matte finish
E = AgPd (2)
X = Ni barrier
100 % tin plate
matte finish
L = Ni barrier
with tin lead
plated finish
min. 4 % lead
X = 25 V
A = 50 V
B = 100 V
C = 200 V
P = 250 V
A = no
marking
Note
Details see
“Selection
Chart”
T = 7" reel/plastic tape
C = 7" reel/paper tape
O = 7" reel/flamed paper tape
J = 7" reel (low quantity)
R = 11 1/4"/13" reel/
plastic tape
P = 11 1/4"/13" reel/
paper tape
I = 11 1/4"/13" reel/
flamed paper tape
B = bulk
Note
“I” and “O” is used for “E”/”N”
termination code
Notes
(1) DC voltage rating should not be exceeded in application
(2) Termination code “E” is for conductive epoxy assembly
ENVIRONMENTAL STATUS
TERMINATION CODE
C
X
E
L
TERMINATION DESCRIPTION
Non-magnetic copper barrier 100 % tin plated matte finish
Ni barrier 100 % tin plated matte finish
AgPd
Ni barrier 100 % tin plated matte finish min. 4 % lead
RoHS COMPLIANT
Yes
Yes
Yes
No
VISHAY GREEN
Yes
Yes
Yes
No
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
CASE
CODE
STYLE
0402
VJ0402
0603
VJ0603
0805
VJ0805
LENGTH
(L)
0.040 ± 0.004
(1.02 ± 0.10)
0.063 ± 0.006
(1.60 ± 0.15)
0.079 ± 0.008
(2.00 ± 0.20)
WIDTH
(W)
0.020 ± 0.004
(0.51 ± 0.10)
0.031 ± 0.005
(0.80 ± 0.12)
0.049 ± 0.008
(1.25 ± 0.20)
MAXIMUM
THICKNESS (T)
0.021
(0.61)
0.037
(0.94)
0.057
(1.45)
TERMINATIONS PAD (P)
MINIMUM
MAXIMUM (1)
0.004
0.016
(0.10)
(0.41)
0.012
0.018
(0.30)
(0.46)
0.010
0.028
(0.25)
(0.71)
Note
(1) For Cu termination “C” add 0.01 mm to maximum pad terminations
Revision: 27-Nov-14
Document Number: 45071
108
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HIFREQ Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC (VISHAY CODE)
C0G (D)
STYLE
VJ0402
CASE CODE
0402
25
50
100
VOLTAGE (VDC)
VOLTAGE CODE
X
A
B
CAP. CODE
CAP.
••
••
••
0R1
0.1 pF
0R2
0.2 pF
••
••
••
0R3
0.3 pF
••
••
••
0R4
0.4 pF
••
••
••
0R5
0.5 pF
••
••
••
0R6
0.6 pF
••
••
••
0R7
0.7 pF
••
••
••
0R8
0.8 pF
••
••
••
0R9
0.9 pF
••
••
••
1R0
1.0 pF
••
••
••
1R1
1.1 pF
••
••
••
1R2
1.2 pF
••
••
••
1R3
1.3 pF
••
••
••
1R4
1.4 pF
••
••
••
1R5
1.5 pF
••
••
••
1R6
1.6 pF
••
••
••
1R7
1.7 pF
••
••
••
1R8
1.8 pF
••
••
••
1R9
1.9 pF
••
••
••
2R0
2.0 pF
••
••
••
2R1
2.1 pF
••
••
••
2R2
2.2 pF
••
••
••
2R4
2.4 pF
••
••
••
2R7
2.7 pF
••
••
••
3R0
3.0 pF
••
••
••
3R3
3.3 pF
••
••
••
3R6
3.6 pF
••
••
••
3R9
3.9 pF
••
••
••
4R3
4.3 pF
••
••
••
4R7
4.7 pF
••
••
••
5R1
5.1 pF
••
••
••
5R6
5.6 pF
••
••
••
6R2
6.2 pF
••
••
••
6R8
6.8 pF
••
••
••
7R5
7.5 pF
••
••
••
8R2
8.2 pF
••
••
••
9R1
9.1 pF
••
••
••
100
10 pF
••
••
••
110
11 pF
••
••
••
120
12 pF
••
••
••
130
13 pF
••
••
••
150
15 pF
••
••
••
180
18 pF
••
••
••
200
20 pF
••
••
••
••
••
••
220
22 pF
240
24 pF
••
••
••
270
27 pF
••
••
••
300
30 pF
••
••
330
33 pF
••
••
360
36 pF
••
••
390
39 pF
••
••
430
43 pF
••
••
470
47 pF
••
••
510
51 pF
••
••
560
56 pF
••
••
620
62 pF
••
680
68 pF
••
750
75 pF
••
820
82 pF
••
910
91 pF
101
100 pF
111
110 pF
121
120 pF
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
•• Paper carrier
(1) For values below 0.4 pF and tolerance ± 0.05 pF, contact [email protected]
Revision: 27-Nov-14
200
C
TOLERANCE
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
V, B, C, D (1)
V, B, C, D (1)
V, B, C, D (1)
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Document Number: 45071
109
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HIFREQ Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC (VISHAY CODE)
C0G (D)
STYLE
VJ0603
CASE CODE
0603
25
50
100
VOLTAGE (VDC)
VOLTAGE CODE
X
A
B
CAP. CODE
CAP.
••
••
••
0R1
0.1 pF
0R2
0.2 pF
••
••
••
0R3
0.3 pF
••
••
••
0R4
0.4 pF
••
••
••
0R5
0.5 pF
••
••
••
0R6
0.6 pF
••
••
••
0R7
0.7 pF
••
••
••
0R8
0.8 pF
••
••
••
0R9
0.9 pF
••
••
••
1R0
1.0 pF
••
••
••
1R1
1.1 pF
••
••
••
1R2
1.2 pF
••
••
••
1R3
1.3 pF
••
••
••
1R4
1.4 pF
••
••
••
1R5
1.5 pF
••
••
••
1R6
1.6 pF
••
••
••
1R7
1.7 pF
••
••
••
1R8
1.8 pF
••
••
••
1R9
1.9 pF
••
••
••
2R0
2.0 pF
••
••
••
2R1
2.1 pF
••
••
••
2R2
2.2 pF
••
••
••
2R4
2.4 pF
••
••
••
2R7
2.7 pF
••
••
••
3R0
3.0 pF
••
••
••
3R3
3.3 pF
••
••
••
3R6
3.6 pF
••
••
••
3R9
3.9 pF
••
••
••
4R3
4.3 pF
••
••
••
4R7
4.7 pF
••
••
••
5R1
5.1 pF
••
••
••
5R6
5.6 pF
••
••
••
6R2
6.2 pF
••
••
••
6R8
6.8 pF
••
••
••
7R5
7.5 pF
••
••
••
8R2
8.2 pF
••
••
••
9R1
9.1 pF
••
••
••
100
10 pF
••
••
••
110
11 pF
••
••
••
120
12 pF
••
••
••
130
13 pF
••
••
••
150
15 pF
••
••
••
180
18 pF
••
••
••
200
20 pF
••
••
••
220
22 pF
••
••
••
240
24 pF
••
••
••
270
27 pF
••
••
••
300
30 pF
••
••
••
330
33 pF
••
••
••
360
36 pF
••
••
••
390
39 pF
••
••
••
430
43 pF
••
••
••
470
47 pF
••
••
••
510
51 pF
••
••
••
560
56 pF
••
••
••
620
62 pF
•
•
•
680
68 pF
•
•
•
750
75 pF
•
•
•
820
82 pF
•
•
•
910
91 pF
•
•
•
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
•• Paper carrier • Plastic carrier tape
(1) For values below 0.4 pF and tolerance ± 0.05 pF, contact [email protected]
Revision: 27-Nov-14
200
C
250
P
TOLERANCE
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
V, B, C, D (1)
V, B, C, D (1)
V, B, C, D (1)
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Document Number: 45071
110
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HIFREQ Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC (VISHAY CODE)
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
101
100 pF
C0G (D)
25
X
50
A
VJ0603
0603
100
B
200
C
250
P
TOLERANCE
•
•
F, G, J, K, M
•
•
•
111
110 pF
•
•
•
F, G, J, K, M
121
120 pF
•
•
•
F, G, J, K, M
131
130 pF
•
•
•
F, G, J, K, M
151
150 pF
•
•
•
181
180 pF
•
•
F, G, J, K, M
201
200 pF
•
•
F, G, J, K, M
221
220 pF
•
•
F, G, J, K, M
241
240 pF
•
•
F, G, J, K, M
271
270 pF
•
•
F, G, J, K, M
301
300 pF
•
•
F, G, J, K, M
331
330 pF
•
•
F, G, J, K, M
F, G, J, K, M
361
360 pF
•
F, G, J, K, M
391
390 pF
•
F, G, J, K, M
431
430 pF
•
F, G, J, K, M
471
470 pF
•
F, G, J, K, M
511
510 pF
561
560 pF
621
620 pF
681
680 pF
751
750 pF
821
820 pF
911
910 pF
102
1.0 nF
112
1.1 nF
122
1.2 nF
132
1.3 nF
152
1.5 nF
182
1.8 nF
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
•• Paper carrier • Plastic carrier tape
(1) For values below 0.4 pF and tolerance ± 0.05 pF, contact [email protected]
Revision: 27-Nov-14
Document Number: 45071
111
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HIFREQ Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC (VISHAY CODE)
C0G (D)
STYLE
VJ0805
CASE CODE
0805
VOLTAGE (VDC)
25
50
100
200
250
VOLTAGE CODE
X
A
B
C
P
TOLERANCE
CAP. CODE
CAP.
0R1
0.1 pF
••
••
••
••
••
V, B, C, D (1)
0R2
0.2 pF
••
••
••
••
••
V, B, C, D (1)
0R3
0.3 pF
••
••
••
••
••
V, B, C, D (1)
0R4
0.4 pF
••
••
••
••
••
V, B, C, D
0R5
0.5 pF
••
••
••
••
••
V, B, C, D
0R6
0.6 pF
••
••
••
••
••
V, B, C, D
0R7
0.7 pF
••
••
••
••
••
V, B, C, D
0R8
0.8 pF
••
••
••
••
••
V, B, C, D
0R9
0.9 pF
••
••
••
••
••
V, B, C, D
1R0
1.0 pF
••
••
••
••
••
B, C, D
1R1
1.1 pF
••
••
••
••
••
B, C, D
1R2
1.2 pF
••
••
••
••
••
B, C, D
1R3
1.3 pF
••
••
••
••
••
B, C, D
1R4
1.4 pF
••
••
••
••
••
B, C, D
1R5
1.5 pF
••
••
••
••
••
B, C, D
1R6
1.6 pF
••
••
••
••
••
B, C, D
1R7
1.7 pF
••
••
••
••
••
B, C, D
1R8
1.8 pF
••
••
••
••
••
B, C, D
1R9
1.9 pF
••
••
••
••
••
B, C, D
2R0
2.0 pF
••
••
••
••
••
B, C, D
2R1
2.1 pF
••
••
••
••
••
B, C, D
2R2
2.2 pF
••
••
••
••
••
B, C, D
2R4
2.4 pF
••
••
••
••
••
B, C, D
2R7
2.7 pF
••
••
••
••
••
B, C, D
3R0
3.0 pF
••
••
••
••
••
B, C, D
3R3
3.3 pF
••
••
••
••
••
B, C, D
3R6
3.6 pF
••
••
••
••
••
B, C, D
3R9
3.9 pF
••
••
••
••
••
B, C, D
4R3
4.3 pF
••
••
••
••
••
B, C, D
4R7
4.7 pF
••
••
••
••
••
B, C, D
5R1
5.1 pF
••
••
••
••
••
B, C, D
5R6
5.6 pF
••
••
••
••
••
B, C, D
6R2
6.2 pF
••
••
••
••
••
B, C, D
6R8
6.8 pF
••
••
••
••
••
B, C, D
7R5
7.5 pF
••
••
••
••
••
B, C, D
8R2
8.2 pF
••
••
••
••
••
B, C, D
9R1
9.1 pF
••
••
••
••
••
B, C, D
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
•• Paper carrier • Plastic carrier tape
(1) For values below 0.4 pF and tolerance ± 0.05 pF, contact [email protected]
Revision: 27-Nov-14
Document Number: 45071
112
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HIFREQ Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC (VISHAY CODE)
C0G (D)
STYLE
VJ0805
CASE CODE
0805
VOLTAGE (VDC)
25
50
100
200
250
VOLTAGE CODE
X
A
B
C
P
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
•
•
•
•
•
CAP. CODE
CAP.
100
10 pF
••
••
••
110
11 pF
••
••
••
120
12 pF
••
••
••
130
13 pF
••
••
••
150
15 pF
••
••
••
180
18 pF
••
••
••
200
20 pF
••
••
••
220
22 pF
••
••
••
240
24 pF
••
••
••
270
27 pF
••
••
••
300
30 pF
••
••
••
330
33 pF
••
••
••
360
36 pF
••
••
••
390
39 pF
••
••
••
430
43 pF
••
••
••
470
47 pF
••
••
••
510
51 pF
••
••
••
560
56 pF
••
••
••
620
62 pF
••
••
••
680
68 pF
••
••
••
750
75 pF
••
••
••
820
82 pF
••
••
••
910
91 pF
••
••
••
101
100 pF
•
•
•
111
110 pF
•
•
•
121
120 pF
•
•
•
131
130 pF
•
•
•
151
150 pF
•
•
•
181
180 pF
•
•
•
201
200 pF
•
•
•
221
220 pF
•
•
•
241
240 pF
•
•
•
271
270 pF
•
•
•
301
300 pF
•
•
•
331
330 pF
•
•
•
361
360 pF
•
•
•
391
390 pF
•
•
•
431
430 pF
•
•
•
471
470 pF
•
•
•
511
510 pF
•
•
•
561
560 pF
•
•
•
621
620 pF
•
•
•
681
680 pF
•
•
•
751
750 pF
•
•
821
820 pF
•
•
911
910 pF
•
•
102
1.0 nF
•
•
112
1.1 nF
•
122
1.2 nF
•
132
1.3 nF
•
152
1.5 nF
•
182
1.8 nF
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
•• Paper carrier • Plastic carrier tape
(1) For values below 0.4 pF and tolerance ± 0.05 pF, contact [email protected]
Revision: 27-Nov-14
TOLERANCE
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Document Number: 45071
113
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HIFREQ Series
www.vishay.com
Vishay Vitramon
HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
MIN. INSULATION RESISTANCE VS. TEMPERATURE
10 000
1.5
INSULATION RESISTANCE
(ΩF)
% CAPACITANCE CHANGE
2.0
1.0
1000
0.5
0.0
- 0.5
NP0
100
- 1.0
- 1.5
- 2.0
- 75 - 50 - 25
0
25
10
75 100 125 150 175
50
10
25
TEMPERATURE °C
0.2
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
150
VOLTAGE COEFFICIENT OF CAPACITANCE
AGING RATE
0.2
50
100
TEMPERATURE °C
0.1
0.0
- 0.1
0.1
0.0
- 0.1
- 0.2
- 0.2
1
10
100
1000
0
10 000
10
20
TYPICAL Q VALUE VS. FREQUENCY
SIZE 0402
10 000
30
40
50
60
70
80
90
100
DC VOLTS APPLIED
HOURS
TYPICAL ESR VS. FREQUENCY
SIZE 0402
1
1 pF
1000
1 pF
ESR (Ω)
Q
15 pF
100
27 pF
0.1
82 pF
15 pF
27 pF
82 pF
10
1
0.01
100
1000
100
1000
FREQUENCY (MHz)
TYPICAL SRF/PRF VS. CAPACITANCE
SIZE 0402
100
SRF/PRF (GHz)
FREQUENCY (MHz)
10
PRF
SRF
1
1
Revision: 27-Nov-14
10
CAPACITANCE (pF)
100
Document Number: 45071
114
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HIFREQ Series
www.vishay.com
Vishay Vitramon
HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS
TYPICAL Q VALUE VS. FREQUENCY
SIZE 0603
10 000
1 pF
1000
1 pF
100
ESR (Ω)
4.7 pF
Q
TYPICAL ESR VS. FREQUENCY
SIZE 0603
1
470 pF
4.7 pF
0.1
470 pF
10
100 pF
100 pF
0.01
1
100
100
1000
1000
FREQUENCY (MHz)
FREQUENCY (MHz)
TYPICAL SRF/PRF VS. CAPACITANCE
SIZE 0603
SRF/PRF (GHz)
100
10
PRF
SRF
1
0.1
1
TYPICAL Q VALUE VS. FREQUENCY
SIZE 0805
10 000
1000
TYPICAL ESR VS. FREQUENCY
SIZE 0805
1
1 pF
1 pF
ESR (Ω)
1000
Q
10
100
CAPACITANCE (pF)
100
680 pF
680 pF
0.1
330 pF
10
330 pF
1
0.01
100
1000
100
1000
FREQUENCY (MHz)
FREQUENCY (MHz)
TYPICAL SRF/PRF VS. CAPACITANCE
SIZE 0805
SRF/PRF (GHz)
100
10
SRF
PRF
1
0.1
1
Revision: 27-Nov-14
10
100
1000
CAPACITANCE (pF)
10 000
Document Number: 45071
115
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ HIFREQ Series
www.vishay.com
Vishay Vitramon
STANDARD PACKAGING QUANTITIES
(1)(2)(3)
7" REEL QUANTITIES
CASE
CODE
TAPE
SIZE
PAPER TAPE
PACKAGING CODE
“C”/“O”
0402
8 mm
5000
0603 (4)
8 mm
4000
0805 (4)
8 mm
3000
3000
PLASTIC TAPE
PACKAGING CODE
“T”
11 1/4" AND 13" REEL QUANTITIES
LOW
QUANTITY
“J” (5)
PAPER TAPE
PACKAGING CODE
“P”/“I”
n/a
1000
10 000
n/a
4000
1000
10 000
10 000
1000
10 000
10 000
PLASTIC TAPE
PACKAGING CODE
“R”
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape
(2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(3) n/a = not available
(4) Packaging “C”/”P”/”O”/”I” and “T”/”R” or lower quantities can depend from product thickness
(5) Paper/plastic tape used by availability
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to +40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment (1 year for copper).
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 27-Nov-14
Document Number: 45071
116
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Capacitors
for RF Power Applications
FEATURES
• Case size 0505, 1111, 2525, and 3838
Available
• Ultra-stable, high Q dielectric material
• Lead (Pb)-free terminations code “X”
Available
• Tin/lead termination code “L”
• Non-magnetic copper termination code “C”
• Reliable Noble Metal Electrode (NME) system
Available
• High frequency
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATIONS
• MRI coils and generators
• RF instruments
• Lasers, CATV, UHF/microwave RF power amplifiers
• Filter networks, timing circuits
• Mixers, oscillators impedance matching networks
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at 25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Aging Rate: 0 % maximum per decade
Capacitance Range:
0505: 0.1 pF to 100 pF
1111: 0.2 pF to 1000 pF
2525: 1.0 pF to 2700 pF
3838: 1.0 pF to 5100 pF
Insulation Resistance (IR):
at +25 °C and rated voltage 100 000 M minimum or
1000 F, whichever is less
at +125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less
Voltage Rating:
0505: 200 VDC to 250 VDC
1111: 300 VDC to 1500 VDC
2525: 300 VDC to 3600 VDC
3838: 500 VDC to 7200 VDC
Dielectric Strength Test:
performed per method 103 of EIA-198-2-E.
Temperature Coefficient of Capacitance (TCC):
C0G (D): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C with
zero (0) VDC applied
Applied test voltages:
 250 VDC-rated: min. 250 % of rated voltage
300 VDC-rated: min. 150 % of rated voltage
630 VDC- to 1000 VDC-rated: 150 % of rated voltage
1500 VDC and up: 120 % rated voltage
Dissipation Factor (DF):
C0G (D): 0.05 % max. at 1.0 VRMS and 1 MHz
for values  1000 pF
C0G (D): 0.05 % max. at 1.0 VRMS and 1 kHz
for values > 1000 pF
Revision: 23-Jan-15
Document Number: 45221
117
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE
D = NP0
0505
1111
2525
3838
CAPACITANCE
MAXIMUM VOLTAGE
(V)
250
1500
3600
7200
MINIMUM
0.1 pF
0.2 pF
1.0 pF
1.0 pF
MAXIMUM
100 pF
1000 pF
2700 pF
5100 pF
Notes
• For values below 0.4 pF and tolerance ± 0.05 pF, contact [email protected]
Detail ratings see “Selection Chart”
ORDERING INFORMATION
VJ0505
D
1R0
B
X
C
A
C
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION
DC VOLTAGE
RATING (1)
MARKING
PACKAGING
0505
1111
2525
3838
D = HIFREQ
Expressed in
picofarads (pF).
The first two digits
are significant, the
third is a multiplier.
An “R” indicates a
decimal point.
Examples:
1R0 = 1.0 pF
V = ± 0.05 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
C = non-magnetic
copper barrier
100 % tin plate
matte finish
X = Ni barrier
100 % tin plate
matte finish
L = Ni barrier
with tin lead
plated finish
min. 4 % lead
C = 200 V
P = 250 V
D = 300 V
E = 500 V
L = 630 V
I = 800 V
G = 1000 V
R = 1500 V
F = 2000 V
O = 2500 V
H = 3000 V
W = 3600 V
S = 7200 V
A = no
marking
M = marking
Note
Details see
“Selection
Chart”
T = 7" reel/plastic tape
J = 7" reel (low quantity)
R = 11 1/4"/13" reel/
plastic tape
W = waffle pack
Note
(1) DC voltage rating should not be exceeded in application
ENVIRONMENTAL STATUS
TERMINATION CODE
X
L
C
TERMINATION DESCRIPTION
Ni barrier 100 % tin plated matte finish
Ni barrier with tin lead plated finish min. 4 % lead
Cu barrier 100 % tin plated matte finish (non-magnetic)
RoHS COMPLIANT
Yes
No
Yes
VISHAY GREEN
Yes
No
Yes
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
CASE
CODE
STYLE
0505
VJ0505
1111
VJ1111
2525
VJ2525
3838
VJ3838
LENGTH
(L)
0.055 ± 0.025
(1.40 ± 0.64)
0.117 ± 0.028
(2.98 ± 0.70)
0.250 + 0.020/- 0.030
(6.35 + 0.508/- 0.762)
0.360 - 0.400
(9.14 - 10.15)
WIDTH
(W)
0.055 ± 0.015
(1.40 ± 0.38)
0.110 ± 0.030
(2.79 ± 0.76)
0.250 ± 0.015
(6.35 ± 0.381)
0.360 - 0.400
(9.14 - 10.15)
MAXIMUM
THICKNESS (T)
0.057
(1.45)
0.102
(2.59)
0.102
(2.59)
0.118
(3.00)
TERMINATIONS PAD (P)
MINIMUM
MAXIMUM (1)
0.004
0.016
(0.10)
(0.41)
0.012
0.018
(0.30)
(0.46)
0.010
0.030
(0.25)
(0.76)
0.010
0.030
(0.25)
(0.76)
Note
For copper terminations add 0.01 mm to maximum termination pad
(1)
Revision: 23-Jan-15
Document Number: 45221
118
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC (VISHAY CODE)
C0G (D)
STYLE
VJ0505
CASE CODE
0505
VOLTAGE (VDC)
200
250
VOLTAGE CODE
C
P
CAP. CODE
CAP.
0R1
0.1 pF
•
•
0R2
0.2 pF
•
•
0R3
0.3 pF
•
•
0R4
0.4 pF
•
•
0R5
0.5 pF
•
•
0R6
0.6 pF
•
•
0R7
0.7 pF
•
•
0R8
0.8 pF
•
•
0R9
0.9 pF
•
•
1R0
1.0 pF
•
•
1R1
1.1 pF
•
•
1R2
1.2 pF
•
•
1R3
1.3 pF
•
•
1R4
1.4 pF
•
•
1R5
1.5 pF
•
•
1R6
1.6 pF
•
•
1R7
1.7 pF
•
•
1R8
1.8 pF
•
•
1R9
1.9 pF
•
•
2R0
2.0 pF
•
•
2R1
2.1 pF
•
•
2R2
2.2 pF
•
•
2R4
2.4 pF
•
•
2R7
2.7 pF
•
•
3R0
3.0 pF
•
•
3R3
3.3 pF
•
•
3R6
3.6 pF
•
•
3R9
3.9 pF
•
•
4R3
4.3 pF
•
•
4R7
4.7 pF
•
•
5R1
5.1 pF
•
•
5R6
5.6 pF
•
•
6R2
6.2 pF
•
•
6R8
6.8 pF
•
•
7R5
7.5 pF
•
•
8R2
8.2 pF
•
•
9R1
9.1 pF
•
•
100
10 pF
•
•
110
11 pF
•
•
120
12 pF
•
•
130
13 pF
•
•
150
15 pF
•
•
180
18 pF
•
•
200
20 pF
•
•
220
22 pF
•
•
240
24 pF
•
•
270
27 pF
•
•
300
30 pF
•
•
330
33 pF
•
•
360
36 pF
•
•
390
39 pF
•
•
430
43 pF
•
•
470
47 pF
•
•
510
51 pF
•
•
560
56 pF
•
•
620
62 pF
•
680
68 pF
•
750
75 pF
•
820
82 pF
•
910
91 pF
•
101
100 pF
•
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
(1) For values below 0.4 pF and tolerance ± 0.05 pF contact [email protected]
Revision: 23-Jan-15
TOLERANCE
B, C, D (1)
B, C, D (1)
B, C, D (1)
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Document Number: 45221
119
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC (VISHAY CODE)
C0G (D)
STYLE
VJ1111
CASE CODE
1111
300
630
1000
VOLTAGE (VDC)
VOLTAGE CODE
D
L
G
CAP. CODE
CAP.
•
•
•
0R2
0.2 pF
0R3
0.3 pF
•
•
•
0R4
0.4 pF
•
•
•
0R5
0.5 pF
•
•
•
•
•
•
0R6
0.6 pF
•
•
•
0R7
0.7 pF
0R8
0.8 pF
•
•
•
•
•
•
0R9
0.9 pF
•
•
•
1R0
1.0 pF
1R1
1.1 pF
•
•
•
•
•
•
1R2
1.2 pF
•
•
•
1R3
1.3 pF
1R4
1.4 pF
•
•
•
•
•
•
1R5
1.5 pF
•
•
•
1R6
1.6 pF
1R7
1.7 pF
•
•
•
•
•
•
1R8
1.8 pF
•
•
•
1R9
1.9 pF
2R0
2.0 pF
•
•
•
•
•
•
2R1
2.1 pF
•
•
•
2R2
2.2 pF
2R4
2.4 pF
•
•
•
•
•
•
2R7
2.7 pF
•
•
•
3R0
3.0 pF
3R3
3.3 pF
•
•
•
•
•
•
3R6
3.6 pF
•
•
•
3R9
3.9 pF
4R3
4.3 pF
•
•
•
•
•
•
4R7
4.7 pF
•
•
•
5R1
5.1 pF
5R6
5.6 pF
•
•
•
•
•
•
6R2
6.2 pF
•
•
•
6R8
6.8 pF
7R5
7.5 pF
•
•
•
•
•
•
8R2
8.2 pF
•
•
•
9R1
9.1 pF
100
10 pF
•
•
•
•
•
•
110
11 pF
•
•
•
120
12 pF
130
13 pF
•
•
•
•
•
•
150
15 pF
•
•
•
180
18 pF
200
20 pF
•
•
•
•
•
•
220
22 pF
•
•
•
240
24 pF
270
27 pF
•
•
•
•
•
•
300
30 pF
330
33 pF
•
•
•
•
•
•
360
36 pF
•
•
•
390
39 pF
430
43 pF
•
•
•
•
•
•
470
47 pF
•
•
•
510
51 pF
560
56 pF
•
•
•
•
•
•
620
62 pF
•
•
•
680
68 pF
750
75 pF
•
•
•
•
•
•
820
82 pF
•
•
•
910
91 pF
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
(1) For values below 0.4 pF and tolerance ± 0.05 pF contact [email protected]
Revision: 23-Jan-15
1500
R
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TOLERANCE
B, C, D (1)
B, C, D (1)
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
V, B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Document Number: 45221
120
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC (VISHAY CODE)
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
101
100 pF
C0G (D)
VJ1111
1111
TOLERANCE
300
D
630
L
1000
G
1500
R
•
•
•
•
F, G, J, K, M
•
F, G, J, K, M
111
110 pF
•
•
•
121
120 pF
•
•
•
F, G, J, K, M
131
130 pF
•
•
•
F, G, J, K, M
151
150 pF
•
•
•
F, G, J, K, M
181
180 pF
•
•
•
201
200 pF
•
•
F, G, J, K, M
221
220 pF
•
•
F, G, J, K, M
241
240 pF
•
•
F, G, J, K, M
301
300 pF
•
•
F, G, J, K, M
331
330 pF
•
•
F, G, J, K, M
361
360 pF
•
•
F, G, J, K, M
391
390 pF
•
•
F, G, J, K, M
431
430 pF
•
•
F, G, J, K, M
471
470 pF
•
•
F, G, J, K, M
511
510 pF
•
F, G, J, K, M
561
560 pF
•
F, G, J, K, M
621
620 pF
•
F, G, J, K, M
681
680 pF
•
F, G, J, K, M
751
750 pF
•
F, G, J, K, M
821
820 pF
•
F, G, J, K, M
911
910 pF
•
F, G, J, K, M
102
1.0 nF
•
F, G, J, K, M
F, G, J, K, M
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
(1) For values below 0.4 pF and tolerance ± 0.05 pF contact [email protected]
Revision: 23-Jan-15
Document Number: 45221
121
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC (VISHAY CODE)
C0G (D)
STYLE
VJ2525
CASE CODE
2525
VOLTAGE (VDC)
300
500
800
1000
1500
2000
VOLTAGE CODE
D
E
I
G
R
F
CAP. CODE
CAP.
•
•
•
•
•
•
1R0
1.0 pF
1R1
1.1 pF
•
•
•
•
•
•
1R2
1.2 pF
•
•
•
•
•
•
1R3
1.3 pF
•
•
•
•
•
•
1R4
1.4 pF
•
•
•
•
•
•
1R5
1.5 pF
•
•
•
•
•
•
1R6
1.6 pF
•
•
•
•
•
•
1R7
1.7 pF
•
•
•
•
•
•
1R8
1.8 pF
•
•
•
•
•
•
1R9
1.9 pF
•
•
•
•
•
•
2R0
2.0 pF
•
•
•
•
•
•
2R1
2.1 pF
•
•
•
•
•
•
2R2
2.2 pF
•
•
•
•
•
•
2R4
2.4 pF
•
•
•
•
•
•
2R7
2.7 pF
•
•
•
•
•
•
3R0
3.0 pF
•
•
•
•
•
•
3R3
3.3 pF
•
•
•
•
•
•
3R6
3.6 pF
•
•
•
•
•
•
3R9
3.9 pF
•
•
•
•
•
•
4R3
4.3 pF
•
•
•
•
•
•
4R7
4.7 pF
•
•
•
•
•
•
5R1
5.1 pF
•
•
•
•
•
•
5R6
5.6 pF
•
•
•
•
•
•
6R2
6.2 pF
•
•
•
•
•
•
6R8
6.8 pF
•
•
•
•
•
•
7R5
7.5 pF
•
•
•
•
•
•
8R2
8.2 pF
•
•
•
•
•
•
9R1
9.1 pF
•
•
•
•
•
•
100
10 pF
•
•
•
•
•
•
110
11 pF
•
•
•
•
•
•
120
12 pF
•
•
•
•
•
•
130
13 pF
•
•
•
•
•
•
150
15 pF
•
•
•
•
•
•
160
16 pF
•
•
•
•
•
•
180
18 pF
•
•
•
•
•
•
200
20 pF
•
•
•
•
•
•
220
22 pF
•
•
•
•
•
•
240
24 pF
•
•
•
•
•
•
270
27 pF
•
•
•
•
•
•
300
30 pF
•
•
•
•
•
•
330
33 pF
•
•
•
•
•
•
360
36 pF
•
•
•
•
•
•
390
39 pF
•
•
•
•
•
•
430
43 pF
•
•
•
•
•
•
470
47 pF
•
•
•
•
•
•
510
51 pF
•
•
•
•
•
•
560
56 pF
•
•
•
•
•
•
620
62 pF
•
•
•
•
•
•
680
68 pF
•
•
•
•
•
•
750
75 pF
•
•
•
•
•
•
820
82 pF
•
•
•
•
•
•
910
91 pF
•
•
•
•
•
•
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
- For tolerance B contact [email protected]
Revision: 23-Jan-15
2500
O
3000
H
3600
W
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TOLERANCE
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Document Number: 45221
122
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC (VISHAY CODE)
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
C0G (D)
300
D
500
E
800
I
1000
G
VJ2525
2525
1500
R
2000
F
2500
O
3000
H
3600
W
•
TOLERANCE
101
100 pF
•
•
•
•
•
•
•
•
F, G, J, K, M
111
110 pF
•
•
•
•
•
•
•
•
F, G, J, K, M
121
120 pF
•
•
•
•
•
•
•
•
F, G, J, K, M
131
130 pF
•
•
•
•
•
•
•
•
F, G, J, K, M
151
150 pF
•
•
•
•
•
•
•
•
F, G, J, K, M
161
160 pF
•
•
•
•
•
•
•
•
F, G, J, K, M
181
180 pF
•
•
•
•
•
•
•
•
F, G, J, K, M
201
200 pF
•
•
•
•
•
•
•
•
F, G, J, K, M
221
220 pF
•
•
•
•
•
•
•
•
F, G, J, K, M
241
240 pF
•
•
•
•
•
•
•
•
F, G, J, K, M
271
270 pF
•
•
•
•
•
•
•
•
F, G, J, K, M
301
300 pF
•
•
•
•
•
•
F, G, J, K, M
331
330 pF
•
•
•
•
•
•
F, G, J, K, M
361
360 pF
•
•
•
•
•
•
F, G, J, K, M
391
390 pF
•
•
•
•
•
•
F, G, J, K, M
431
430 pF
•
•
•
•
•
•
F, G, J, K, M
471
470 pF
•
•
•
•
•
•
F, G, J, K, M
511
510 pF
•
•
•
•
•
F, G, J, K, M
561
560 pF
•
•
•
•
•
F, G, J, K, M
621
620 pF
•
•
•
•
•
F, G, J, K, M
681
680 pF
•
•
•
•
•
F, G, J, K, M
751
750 pF
•
•
•
•
•
F, G, J, K, M
821
820 pF
•
•
•
•
•
F, G, J, K, M
911
910 pF
•
•
•
•
•
F, G, J, K, M
102
1.0 nF
•
•
•
•
•
F, G, J, K, M
112
1.1 nF
•
•
•
•
•
F, G, J, K, M
122
1.2 nF
•
•
•
•
•
F, G, J, K, M
152
1.5 nF
•
•
•
F, G, J, K, M
182
1.8 nF
•
•
•
F, G, J, K, M
222
2.0 nF
•
•
•
F, G, J, K, M
242
2.4 nF
•
F, G, J, K, M
272
2.7 nF
•
F, G, J, K, M
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
- For tolerance B contact [email protected]
Revision: 23-Jan-15
Document Number: 45221
123
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC (VISHAY CODE)
C0G (D)
STYLE
VJ3838
CASE CODE
3838
500
1000
2500
3600
VOLTAGE (VDC)
VOLTAGE CODE
E
G
O
W
CAP. CODE
CAP.
•
•
•
•
1R0
1.0 pF
1R1
1.1 pF
•
•
•
•
1R2
1.2 pF
•
•
•
•
1R3
1.3 pF
•
•
•
•
1R4
1.4 pF
•
•
•
•
1R5
1.5 pF
•
•
•
•
1R6
1.6 pF
•
•
•
•
1R7
1.7 pF
•
•
•
•
1R8
1.8 pF
•
•
•
•
1R9
1.9 pF
•
•
•
•
2R0
2.0 pF
•
•
•
•
2R1
2.1 pF
•
•
•
•
2R2
2.2 pF
•
•
•
•
2R4
2.4 pF
•
•
•
•
2R7
2.7 pF
•
•
•
•
3R0
3.0 pF
•
•
•
•
3R3
3.3 pF
•
•
•
•
3R6
3.6 pF
•
•
•
•
3R9
3.9 pF
•
•
•
•
4R3
4.3 pF
•
•
•
•
4R7
4.7 pF
•
•
•
•
5R1
5.1 pF
•
•
•
•
5R6
5.6 pF
•
•
•
•
6R2
6.2 pF
•
•
•
•
6R8
6.8 pF
•
•
•
•
7R5
7.5 pF
•
•
•
•
8R2
8.2 pF
•
•
•
•
9R1
9.1 pF
•
•
•
•
100
10 pF
•
•
•
•
110
11 pF
•
•
•
•
120
12 pF
•
•
•
•
130
13 pF
•
•
•
•
150
15 pF
•
•
•
•
160
16 pF
•
•
•
•
180
18 pF
•
•
•
•
200
20 pF
•
•
•
•
220
22 pF
•
•
•
•
240
24 pF
•
•
•
•
270
27 pF
•
•
•
•
300
30 pF
•
•
•
•
330
33 pF
•
•
•
•
360
36 pF
•
•
•
•
390
39 pF
•
•
•
•
430
43 pF
•
•
•
•
470
47 pF
•
•
•
•
510
51 pF
•
•
•
•
560
56 pF
•
•
•
•
620
62 pF
•
•
•
•
680
68 pF
•
•
•
•
750
75 pF
•
•
•
•
820
82 pF
•
•
•
•
910
91 pF
•
•
•
•
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
- For tolerance B contact [email protected]
Revision: 23-Jan-15
5000
M
7200
S
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TOLERANCE
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Document Number: 45221
124
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC (VISHAY CODE)
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
101
100 pF
111
110 pF
121
120 pF
131
130 pF
151
150 pF
161
160 pF
181
180 pF
201
200 pF
221
220 pF
241
240 pF
271
270 pF
301
300 pF
331
330 pF
361
360 pF
391
390 pF
431
430 pF
471
470 pF
511
510 pF
561
560 pF
621
620 pF
681
680 pF
751
750 pF
821
820 pF
911
910 pF
102
1.0 nF
112
1.1 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.0 nF
242
2.4 nF
272
2.7 nF
302
3.0 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
512
5.1 nF
C0G (D)
VJ3838
3838
500
E
1000
G
2500
O
3600
W
5000
M
7200
S
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TOLERANCE
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
• Plastic carrier tape
- For tolerance B contact [email protected]
Revision: 23-Jan-15
Document Number: 45221
125
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS
ESR VS. FREQUENCY
SIZE 0505 QUAD RF MLCC
100
Q VALUE VS. FREQUENCY
SIZE 0505 QUAD RF MLCC
10 000
1 pF
10
1000
10 pF
1
Q
ESR (Ω)
1 pF
100
10 pF
100 pF
0.1
10
100 pF
0.01
1
10
100
FREQUENCY (MHz)
1000
10
SRF VS. CAPACITANCE
SIZE 0505 QUAD RF MLCC
10
10
100
FREQUENCY (MHz)
1000
CURRENT RATING
SIZE 0505 QUAD RF MLCC, EXT. VOLTAGE
CURRENT (ARMS)
SRF (GHz)
1000 MHz
1
1
500 MHz
150 MHz
0.1
0.1
1
10
CAPACITANCE (pF)
100
ESR VS. FREQUENCY
SIZE 1111 QUAD RF MLCC
100
1
100
Q VALUE VS. FREQUENCY
SIZE 1111 QUAD RF MLCC
10 000
1.5 pF
10
1000
1.5 pF
1
10 pF
10 pF
Q
ESR (Ω)
10
CAPACITANCE (pF)
0.1
180 pF
0.01
1000 pF
100
180 pF
1000 pF
10
0.001
1
10
Revision: 23-Jan-15
100
FREQUENCY (MHz)
1000
10
100
FREQUENCY (MHz)
1000
Document Number: 45221
126
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS
SRF VS. CAPACITANCE
SIZE 1111 QUAD RF MLCC
100
CURRENT (ARMS)
SRF (GHz)
10
1
CURRENT RATING
SIZE 1111 QUAD RF MLCC, EXT. VOLTAGE
10
1 GHz
150 MHz
1
30 MHz
0.1
0.1
1
10
100
CAPACITANCE (pF)
ESR VS. FREQUENCY
SIZE 2525 QUAD RF MLCC
100
1
1000
10
100
CAPACITANCE (pF)
1000
Q VALUE VS. FREQUENCY
SIZE 2525 QUAD RF MLCC
10 000
1 pF
10
1000
24 pF
1
Q
ESR (Ω)
1 pF
100
270 pF
24 pF
100 pF
100 pF
0.1
10
270 pF
0.01
1
10
100
FREQUENCY (MHz)
1000
10
SRF VS. CAPACITANCE
SIZE 2525 QUAD RF MLCC
10
100
100
FREQUENCY (MHz)
1000
CURRENT RATING
SIZE 2525 QUAD RF MLCC, EXT. VOLTAGE
CURRENT (ARMS)
SRF (GHz)
150 MHz
1
0.1
10
500 MHz
30 MHz
1
10 MHz
0.01
0.1
1
Revision: 23-Jan-15
10
100
1000
CAPACITANCE (pF)
10 000
1
10
100
1000
CAPACITANCE (pF)
10 000
Document Number: 45221
127
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS
ESR VS. FREQUENCY
SIZE 3838 QUAD RF MLCC
1
0.1
1
0.1
2200 pF
ESR (Ω)
22 pF
ESR (Ω)
ESR VS. FREQUENCY
SIZE 3838 QUAD RF MLCC
100 pF
0.01
680 pF
5100 pF
0.01
180 pF
390 pF
0.001
0.001
10
100
FREQUENCY (MHz)
1000
10
Q VALUE VS. FREQUENCY
SIZE 3838 QUAD RF MLCC
10 000
100
FREQUENCY (MHz)
Q VALUE VS. FREQUENCY
SIZE 3838 QUAD RF MLCC
10 000
100 pF
1000
1000
680 pF
2200 pF
100
Q
Q
22 pF
180 pF
100
5100 pF
390 pF
10
10
1
1
10
100
FREQUENCY (MHz)
1000
1
SRF VS. CAPACITANCE
SIZE 3838 QUAD RF MLCC
100
CURRENT (ARMS)
10 000
SRF (MHz)
1000
1000
100
10
10
100
FREQUENCY (MHz)
1000
CURRENT RATING
SIZE 3838 QUAD RF MLCC, EXT. VOLTAGE
30 MHz
10
10 MHz
1
2 MHz
0.1
0.01
1
Revision: 23-Jan-15
10
100
1000
CAPACITANCE (pF)
10 000
1
10
100
1000
CAPACITANCE (pF)
10 000
Document Number: 45221
128
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
QUAD HIFREQ Series
www.vishay.com
Vishay Vitramon
QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
MIN. INSULATION RESISTANCE VS. TEMPERATURE
10 000
1.5
INSULATION RESISTANCE
(ΩF)
% CAPACITANCE CHANGE
2.0
1.0
1000
0.5
0.0
- 0.5
NP0
100
- 1.0
- 1.5
- 2.0
- 75 - 50 - 25
0
25
50
10
75 100 125 150 175
10
25
TEMPERATURE °C
AGING RATE
150
VOLTAGE COEFFICIENT OF CAPACITANCE
0.2
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
0.2
50
100
TEMPERATURE °C
0.1
0.0
- 0.1
0.1
0.0
- 0.1
- 0.2
- 0.2
1
10
100
1000
10 000
0
10
20
STANDARD PACKAGING QUANTITIES
30
40
50
60
70
80
90
100
DC VOLTS APPLIED
HOURS
(1)(2)(3)(4)
7" REEL QUANTITIES
PLASTIC TAPE
LOW QUANTITY
PACKAGING CODE
“J”
“T”
11 1/4" AND 13" REEL QUANTITIES
WAFFLE PACK
PLASTIC TAPE
PACKAGING CODE
“R”
PLASTIC WAFFLE PACK
PACKAGING CODE
“W”
CASE CODE
TAPE SIZE
0505
8 mm
3000
1000
10 000
n/a
1111
8 mm
2500
1000
10 000
n/a
2525
12 mm
1000
500
n/a
81
3838
16 mm
400
n/a
n/a
35
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape
(2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(3) n/a = not available
(4) Final quantities for packaging can depend on product thickness
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to 40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment (1 year for copper).
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 23-Jan-15
Document Number: 45221
129
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ High Q
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for High Frequency Applications
FEATURES
• Ultra-stable dielectric offering a Temperature
Coefficient of Capacitance (TCC) of
0 ppm/°C ± 30 ppm/°C over the entire
temperature range
• Low Dissipation Factor (DF)
• Wet build process
• Reliable
system
Noble
Available
Metal
Electrode
(NME)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Ideal for critical timing applications
• Ideal for tuning applications
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at + 25 °C unless otherwise specified.
Operating Temperature: - 55 °C to + 150 °C
Aging Rate: 0 % maximum per decade
Voltage Range: 50 VDC to 200 VDC
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 M minimum or,
1000 F whichever is less.
At + 125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less.
Capacitance Range: 1.0 pF to 220 pF
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and 1 MHz for values 1000 pF
0.1 % maximum at 1.0 VRMS and 1 kHz for values > 1000 pF
Revision: 27-Mar-13
Dielectric Strength Test:
Performed per method 103 of EIA 198-2-E.
Applied test voltages:
 200 VDC-rated: 250 % of rated voltage
Document Number: 45050
130
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ High Q
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
CAPACITANCE
DIELECTRIC
CASE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
HIGH Q
C0G (NP0)
0603
100
1.0 pF
100 pF
0805
200
1.0 pF
220 pF
Note
• Detail ratings see “Selection Chart”
ORDERING INFORMATION
VJ0805
Q
101
CASE
CODE
DIELECTRIC CAPACITANCE
NOMINAL
CODE
0603
0805
Q = HIGH Q
K
X
A
A
CAPACITANCE
TOLERANCE
TERMINATION
DC VOLTAGE
RATING (1)
MARKING
A = 50 V
B = 100 V
C = 200 V
A = Unmarked
X = Ni barrier
B = ± 0.10 pF
Expressed in
100 % tin plated
C = ± 0.25 pF
picofarads (pF).
F, E = AgPd (3)
D = ± 0.5 pF
The first two
F=±1%
digits are
G=±2%
significant, the
J=±5%
third is a
K = ± 10 %
multiplier. An
Note
“R” indicates a
B, C, D < 10 pF
decimal point.
F, G, J, K  10 pF
Examples:
101 = 100 pF
1R8 = 1.8 pF
### (2)
C
PACKAGING PROCESS
CODE
C = 7" reel/paper tape
O = reel/flamed paper tape
I = 11 1/4"/13" reel/flamed
paper tape
P = 11 1/4"/13" reel/
paper tape
Note
“O” and “I” are used for
“F” and “E” termination
Notes
• Size 0402 available with Vishay Basic Commodity series, see datasheet: www.vishay.com/doc?28534
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
(2) Process code may be added with up to three digits, used to control non-standard products and /or special requirements.
(3) Termination code “E” is for conductive epoxy assembly.
ENVIRONMENTAL STATUS
TERMINATION CODE
TERMINATION DESCRIPTION
RoHS COMPLIANT
VISHAY GREEN
X
Ni barrier 100 % tin plated matte finish
Yes
Yes
E
AgPd
Yes
Yes
F
AgPd
Yes
No
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
TERMINATION
(P)
STYLE
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
0603
VJ0603
0.063 ± 0.006
(1.60 ± 0.15)
0.031 ± 0.006
(0.80 ± 0.15)
0.036
(0.92)
0.012
(0.30)
0.018
(0.46)
0805
VJ0805
0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20)
0.057
(1.45)
0.010
(0.25)
0.028
(0.71)
CASE
CODE
Revision: 27-Mar-13
Document Number: 45050
131
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ High Q
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
1R0
1R2
1R5
1R8
2R2
2R7
3R3
3R9
4R7
5R6
6R8
8R2
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
HIGH Q
VJ0603
0603
CAP.
1.0 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
50
A
100
B
50
A
VJ0805
0805
100
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
200
C
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
Notes
RoHS-compliant
•• Available in paper carrier tape only
HIGH Q PACKAGING QUANTITIES
CASE CODE
0603
0805
TAPE SIZE
8 mm
8 mm
(1)
7" REEL QUANTITIES
PACKAGING CODE
“C”/“O”
4000
3000
11 1/4" AND 13" REEL QUANTITIES
PACKAGING CODE
“P”/“I”
10 000
10 000
Note
(1) Reference: EIA standard RS481 - “Taping of Surface Mount Components for Automatic Placement”
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to + 40 °C ambient temperature and  70 % related humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 27-Mar-13
Document Number: 45050
132
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ High Q
www.vishay.com
Vishay Vitramon
HIGH Q DIELECTRIC - TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
% CAPACITANCE CHANGE
2.0
INSULATION RESISTANCE
(ΩF)
1.5
MIN. INSULATION RESISTANCE VS. TEMPERATURE
10 000
1.0
1000
0.5
0.0
- 0.5
NP0
100
- 1.0
- 1.5
- 2.0
10
- 75 - 50 - 25
0
25
50
75 100 125 150 175
10
25
TEMPERATURE °C
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
0.2
0.1
0.0
- 0.1
0.1
0.0
- 0.1
- 0.2
- 0.2
1
10
100
1000
10 000
0
10
20
CHANGE OF CAPACITANCE WITH FREQUENCY
40
50
60
70
80
90
100
SERIES RESONANT FREQUENCY
+2
10
RESONANT FREQUENCY (GHz)
+1
0
-1
-2
1 kHz
30
DC VOLTS APPLIED
HOURS
% CAPACITANCE CHANGE
150
VOLTAGE COEFFICIENT OF CAPACITANCE
AGING RATE
0.2
0603
1
0805
0.1
10 kHz
100 kHz
1
1 MHz
10
FREQUENCY
100
1000
CAPACITANCE (pF)
ESR VS. FREQUENCY - VJ0805, 50 V
Q VS. FREQUENCY - VJ0805, 50 V
10 000
1
ESR (Ω )
10 pF
1000
Q
100
50
TEMPERATURE °C
100 pF
100
10 pF
0.1
10
100 pF
1
100
Revision: 27-Mar-13
FREQUENCY (MHz)
1000
0.01
100
1000
FREQUENCY (MHz)
Document Number: 45050
133
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC High Q Dielectric
www.vishay.com
Vishay
Surface Mount Multilayer Ceramic Chip Capacitors
for High Q Commodity Applications
FEATURES
• Ultra stable class 1 dielectric
• High Q and low ESR at high frequency
• Four standard sizes
• High capacitance per unit volume
• Supplied in tape on reel
• For high frequency applications
• Ni-barrier with 100 % tin terminations
• Dry sheet manufacturing technology
• Noble Metal Electrode system (NME)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Mobile telecommunication
• WLAN
• RF modules
• Tuner
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at 25 °C, 30 % to 70 % related humidity,
unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Aging Rate: 0 % maximum per decade
Capacitance Range: 0.5 pF to 3300 pF
Insulation Resistance (IR): after 120 s at UR (DC)
10 G or R x C 500 x F whichever is less
Voltage Range: 16 VDC to 100 VDC
Temperature Coefficient of Capacitance (TCC):
± 30 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor:
Cap. < 30 pF: Q 400 + 20 C
Cap. 30 pF: Q  1000
Dielectric Strength Test:
This is the maximum voltage the capacitors are tested for
1 s to 5 s period and the charge/discharge current does not
exceed 50 mA
 100 VDC: DWV at 250 % of rated voltage
Test Conditions for Capacitance and DF Measurement
Cap.  1000 pF 1.0 VRMS ± 0.2 VRMS, 1 MHz ± 10 %
Cap. > 1000 pF 1.0 VRMS ± 0.2 VRMS, 1 kHz ± 10 %
Revision: 23-Jan-13
Document Number: 28534
134
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC High Q Dielectric
www.vishay.com
Vishay
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
MAXIMUM VOLTAGE
(V)
CASE
MINIMUM
MAXIMUM
0402
50
0.5 pF
470 pF
0603
100
0.5 pF
3.3 nF
High Q
Note
• Detail ratings see selection chart
ORDERING INFORMATION
VJ0402
Q
SIZE
DIELECTRIC
CODE
0402
0603
Q = High Q
101
CAPACITANCE
F
TOLERANCE
Cap. value  5 pF
Two significant
B = ± 0.10 pF
digits followed by
C = ± 0.25 pF
the number of
5 pF > Cap. value < 10 pF
zeros:
C = ± 0.25 pF
1R0 = 1.0 pF
D = ± 0.50 pF
101 = 100 pF
Cap. value 10 pF
F=±1%
G = ±2 %
J = ±5 %
X
TERMINATION
J
VOLTAGE
C
PACKAGING
X = Ni barrier
100 % tin
termination
J = 16 V
X = 25 V
A = 50 V
B = 100 V
C = 7" reel/
paper
P = 13" reel/
paper
W1BC
PROCESS CODE FOR
BASIC COMMODITY
DIMENSIONS in inches (millimeters)
W
T
MB
MB
L
Revision: 23-Jan-13
SIZE
CODE
L
W
T
MAX.
MB
0402
(1005)
0.040 ± 0.002
(1.00 ± 0.05)
0.020 ± 0.002
(0.50 ± 0.05)
0.022
(0.55)
0.010 + 0.002/- 0.004
(0.25 + 0.05/- 0.10)
0603
(1608)
0.063 + 0.006/- 0.004
(1.60 + 0.15/- 0.10)
0.030 + 0.006/- 0.004
(0.80 + 0.15/- 0.10)
0.038
(0.95)
0.016 ± 0.006
(0.40 ± 0.15)
Document Number: 28534
135
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC High Q Dielectric
www.vishay.com
Vishay
SELECTION CHART
DIELECTRIC
STYLE
SIZE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
0R5
1R0
1R2
1R5
1R8
2R2
2R7
3R3
3R9
4R7
5R6
6R8
8R2
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
472
562
682
822
103
HIGH Q
VJ0402
0402
CAP.
0.5 pF
1.0 pF
1.2 pF
1.5 pF
1.8 pF
2.2 pF
2.7 pF
3.3 pF
3.9 pF
4.7 pF
5.6 pF
6.8 pF
8.2 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
39 pF
47 pF
56 pF
68 pF
82 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1000 pF
1200 pF
1500 pF
1800 pF
2200 pF
2700 pF
3300 pF
4700 pF
5600 pF
6800 pF
8200 pF
10 000 pF
VJ0603
0603
16 V
J
25 V
X
50 V
A
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
100 V
B
16 V
J
25 V
X
50 V
A
100 V
B
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
Note
• Letters indicate product thickness, see packaging quantities
Revision: 23-Jan-13
Document Number: 28534
136
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC High Q Dielectric
www.vishay.com
Vishay
PACKAGING QUANTITIES
PAPER TAPE
SIZE CODE
(inch/mm)
MAX.
THICKNESS (mm)
THICKNESS SYMBOL
0402 (1002)
0.55
0603 (1608)
0.95
PAPER TAPE SPECIFICATION
7" REEL (C)
13" REEL (P)
N
10K
20K
S, X
4K
15K
DIMENSIONS OF PAPER TAPE
in millimeters
P0
D0
SYM.
P2
E
F
W
B0
A0
P1
REEL SPECIFICATIONS
PRODUCT SIZE CODE
0402
0603
A0
0.62 ± 0.05
1.02 ± 0.05
B0
1.12 ± 0.05
1.80 ± 0.05
W
8.00 ± 0.10
8.00 ± 0.10
E
1.75 ± 0.05
1.75 ± 0.05
F
3.50 ± 0.05
3.50 ± 0.05
D0
1.55 ± 0.05
1.55 ± 0.05
P0
4.00 ± 0.10
4.00 ± 0.10
P1
2.00 ± 0.05
4.00 ± 0.10
P2
2.00 ± 0.05
2.00 ± 0.05
REEL DIMENSIONS AND TAPE WIDTH
in millimeters
D C
A
Ø 180 mm; 7"
Ø 330 mm; 13"
A
13.0 ± 0.5
13.0 ± 0.5
B
9.0 ± 1.0
9.0 ± 1.0
C
178.0 ± 1.0
330.0 ± 1.0
D
60.0 ± 1.0
100.0 ± 1.0
B
Revision: 23-Jan-13
Document Number: 28534
137
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC High Q Dielectric
www.vishay.com
Vishay
TYPICAL ELECTRICAL CHARACTERISTICS
Q VALUE CRITERIA VS. SPECIFIC FREQUENCY
SIZE 0603
Q VALUE CRITERIA VS. SPECIFIC FREQUENCY
SIZE 0402
10 000
10 000
1 GHz
500 MHz
1 GHz
100 MHz
Q
Q
100
10
100
10
minimum (solid line)
typical (broken line)
1
0.1
10
1
CAPACITANCE (pF)
minimum (solid line)
typical (broken line)
1
0.1
100
1
10
1
TYPICAL ESR VS. FREQUENCY
SIZE 0603
10
10 pF
0.1
1 pF
1
ESR (Ω)
1pF
100 pF
5 pF
4.7 pF
10 pF
0.1
0.01
100
100 000
100
CAPACITANCE (pF)
TYPICAL ESR VS. FREQUENCY
SIZE 0402
68 pF
0.01
100
10 000
1000
FREQUENCY (MHz)
TYPICAL IMPEDANCE VS. FREQUENCY
SIZE 0402
1000
FREQUENCY (MHz)
10 000
TYPICAL IMPEDANCE VS. FREQUENCY
SIZE 0603
100 000
10 000
10 000
1000
IMPEDANCE (Ω)
IMPEDANCE (Ω)
100 MHz
1000
1000
ESR (Ω)
500 MHz
1 pF
100
4.7 pF
10
1
1 pF
100
100
1
10 pF
100 pF
1000
68 pF
0.1
0.1
10
100
1000
10
10 000
100
1000
FREQUENCY (MHz)
FREQUENCY (MHz)
SERIES RESONANT FREQUENCY (MHz)
4.7 pF
10 pF
10 000
SRF VS. CAPACITANCE
10 000
Revision: 23-Jan-13
0402
1000
0603
100
1
10
100
CAPACITANCE (pF)
Document Number: 28534
138
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC High Q Dielectric
www.vishay.com
Vishay
CONSTRUCTION
NO.
NAME
HIGH Q
1
Ceramic material
BaTiO3 based
2
Inner electrode
AgPd alloy
3
4
Termination
5
Inner layer
Ag
Middle layer
Ni
Outer layer
Sn (matt)
3
4
5
1
2
STORAGE AND HANDLING CONDITIONS
(1) To store products at 5 °C to 40 °C ambient temperature and 20 % to 70 % related humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed.
Cautions:
a. Do not store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which
easily be resulted in poor soldering.
b. To store products on the shelf and avoid exposure to moisture.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 23-Jan-13
Document Number: 28534
139
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Ultra High Q/Low ESR
www.vishay.com
Vishay
Surface Mount Multilayer Ceramic Chip Capacitors
for Ultra High Q Commodity Applications
FEATURES
• Ultra stable class 1 dielectric
• Ultra High Q and low ESR at high frequency
• Four standard sizes
• High SRF characteristic
• Ultra low capacitance to 0.1 pF
• High precision capacitance tolerance ± 0.05 pF
• Supplied in tape on reel
• Ni-barrier with 100 % tin terminations
• Dry sheet manufacturing technology
• Base Metal Electrode system (BME)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Mobile telecommunication
• WLAN
• RF modules
• Tuner
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at 25 °C, 30 % to 70 % related humidity,
unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Aging Rate: 0 % maximum per decade
Capacitance Range: 0.1 pF to 100 pF
Insulation Resistance (IR): after 120 s at UR (DC)
Voltage Range: 10 VDC to 250 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
0201:  22 pF: 0 ppm/°C ± 60 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor:
Cap < 30 pF: Q  400 + 20 C
Cap  30 pF: Q  1000
10 G or R x C 500  x F whichever is less
Dielectric Strength Test:
This is the maximum voltage the capacitors are tested for
1 s to 5 s period and the charge/discharge current does not
exceed 50 mA
 100 VDC: DWV at 250 % of rated voltage
250 VDC: DWV at 200 % of rated voltage
Test Conditions for Capacitance and DF Measurement:
Cap.  1000 pF 1.0 VRMS ± 0.2 VRMS, 1 MHz ± 10 %
Cap. > 1000 pF 1.0 VRMS ± 0.2 VRMS, 1 kHz ± 10 %
Revision: 23-Jan-13
Document Number: 28547
140
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Ultra High Q/Low ESR
www.vishay.com
Vishay
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
0201
25
0.1 pF
33 pF
0402
100
0.1 pF
22 pF
0603
250
0.3 pF
47 pF
0805
250
0.3 pF
100 pF
CASE
Ultra High Q
Note
• Detail ratings see “Selection Chart”
ORDERING INFORMATION
VJ0402
L
100
F
X
A
C
W1BC
SIZE CODE
DIELECTRIC
CAPACITANCE
TOLERANCE (1)
TERMINATION
VOLTAGE
PACKAGING
PROCESS
CODE FOR
BASIC
COMMODITY
0201
0402
0603
0805
L = Ultra
High Q
Expressed in pF
two significant
digits followed
by the number
of zeros:
0R3 = 0.3 pF
1R0 = 1.0 pF
150 = 15 pF
Cap. value  5 pF
V = ± 0.05 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
5 pF > Cap. value < 10 pF
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
Cap. value  10 pF
F=±1%
G=±2%
J=±5%
X = Ni barrier
100 % tin
termination
Q = 10 V
X = 25 V
A = 50 V
B = 100 V
P = 250 V
C = 7" reel/
paper tape
P = 13" reel/
paper tape
Note
(1) Details see “Selection Chart”
DIMENSIONS in inches [millimeters]
SIZE
CODE
W
T
MB
MB
L
Revision: 23-Jan-13
L
W
T
MAX.
MB
0201
(0603)
0.024 ± 0.0012 0.012 ± 0.0012
(0.60 ± 0.03)
(0.30 ± 0.03)
0.013
(0.33)
0.006 ± 0.002
(0.15 ± 0.05)
0402
(1005)
0.040 ± 0.002
(1.00 ± 0.05)
0.020 ± 0.002
(0.50 ± 0.05)
0.022
(0.55)
0.010 + 0.002/- 0.004
(0.25 + 0.05/- 0.10)
0603
(1608)
0.063 ± 0.004
(1.60 ± 0.10)
0.030 ± 0.004
(0.80 ± 0.10)
0.035
(0.87)
0.015 ± 0.006
(0.40 ± 0.15)
0805
(2012)
0.080 ± 0.008
(2.00 ± 0.20)
0.050 ± 0.008
(1.25 ± 0.20)
0.038
(0.95)
0.020 ± 0.008
(0.50 ± 0.20)
Document Number: 28547
141
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Ultra High Q/Low ESR
www.vishay.com
Vishay
SELECTION CHART
DIELECTRIC
ULTRA HIGH Q
STYLE
VJ0201
VJ0402
VJ0603
0201
0402
0603
SIZE CODE
VOLTAGE VDC
VOLTAGE CODE
VJ0805
0805
10 V
25 V
50 V
100 V
50 V
100 V
250 V
50 V
100 V
250 V
Q
X
A
B
A
B
P
A
B
P
TOLERANCE
CAP. CODE
CAP.
0R1
0.1 pF
L
L
N
N
B
0R2
0.2 pF
L
L
N
N
V, B
0R3
0.3 pF
L
L
N
N
S
S
S
T
T
T
0R4
0.4 pF
L
L
N
N
S
S
S
T
T
T
V, B
0R5
0.5 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
0R6
0.6 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
0R7
0.7 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
0R8
0.8 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
0R9
0.9 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
1R0
1.0 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
1R2
1.2 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
1R5
1.5 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
1R8
1.8 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
2R2
2.2 pF
L
L
N
N
S
S
S
T
T
T
2R4
2.4 pF
2R7
2.7 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
3R3
3.3 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
3R9
3.9 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
4R7
4.7 pF
L
L
N
N
S
S
S
T
T
T
V, B, C
5R6
5.6 pF
L
L
N
N
S
S
S
T
T
T
B, C, D
6R8
6.8 pF
L
L
N
N
S
S
S
T
T
T
B, C, D
8R2
8.2pF
L
L
N
N
S
S
S
T
T
T
B, C, D
100
10 pF
L
L
N
N
S
S
S
T
T
T
F, G, J
110
11 pF
L
L
N
S
S
S
T
T
T
F, G, J
120
12 pF
L
L
N
S
S
S
T
T
T
F, G, J
130
13 pF
L
L
N
S
S
S
T
T
T
F, G, J
150
15 pF
L
L
N
S
S
S
T
T
T
F, G, J
160
16 pF
L
L
N
S
S
S
T
T
T
F, G, J
180
18 pF
L
L
N
S
S
S
T
T
T
F, G, J
200
20 pF
L
N
S
S
S
T
T
T
F, G, J
220
22 pF
L
N
S
S
S
T
T
T
F, G, J
240
24 pF
L
S
S
S
T
T
T
F, G, J
270
27 pF
L
S
S
S
T
T
T
F, G, J
300
30 pF
L
S
S
S
T
T
T
F, G, J
330
33 pF
L
S
S
S
T
T
T
F, G, J
360
36 pF
S
S
S
T
T
T
F, G, J
390
39 pF
S
S
S
T
T
T
F, G, J
430
43 pF
S
S
S
T
T
T
F, G, J
470
47 pF
S
S
S
T
T
T
F, G, J
560
56 pF
T
T
T
F, G, J
680
68 pF
T
T
T
F, G, J
820
82 pF
T
T
T
F, G, J
101
100 pF
T
T
T
F, G, J
S
V, B
V, B, C
V, B, C
Note
• Letters indicate product thickness, see “Packaging Quantities”
Revision: 23-Jan-13
Document Number: 28547
142
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Ultra High Q/Low ESR
www.vishay.com
Vishay
PACKAGING QUANTITIES
PAPER TAPE
SIZE CODE
(inch/mm)
THICKNESS
(mm)
THICKNESS
SYMBOL
7" REEL (C)
13" REEL (P)
0201 (0603)
0.30 ± 0.03
L
15K
-
0402 (1002)
0.50 ± 0.05
N
10K
50K
0603 (1608)
0.80 ± 0.07
S
4K
15K
0805 (2012)
0.85 ± 0.10
T
4K
15K
PAPER TAPE SPECIFICATION
DIMENSIONS OF PAPER TAPE
in millimeters
P0
P2
D0
SYM.
E
F
W
B0
A0
P1
PRODUCT SIZE CODE
0201
0402
0603
0805
A0
0.37 ± 0.03
0.62 ± 0.05
1.02 ± 0.05
1.50 ± 0.10
B0
0.67 ± 0.03
1.12 ± 0.05
1.82 ± 0.05
2.30 ± 0.10
W
8.00 ± 0.10
8.00 ± 0.10
8.00 ± 0.10
8.00 ± 0.10
E
1.75 ± 0.05
1.75 ± 0.05
1.75 ± 0.05
1.75 ± 0.05
F
3.50 ± 0.05
3.50 ± 0.05
3.50 ± 0.05
3.50 ± 0.05
D0
1.55 ± 0.05
1.55 ± 0.05
1.55 ± 0.05
1.55 ± 0.05
P0
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
P1
2.00 ± 0.05
2.00 ± 0.05
4.00 ± 0.10
4.00 ± 0.10
P2
2.00 ± 0.05
2.00 ± 0.05
2.00 ± 0.05
2.00 ± 0.05
REEL SPECIFICATIONS
REEL DIMENSIONS AND TAPE WIDTH
in millimeters
SYM.
A
D C
A
Ø 180 mm; 7"
Ø 330 mm; 13"
13.0 ± 0.5
13.0 ± 0.5
B
9.0 ± 1.0
9.0 ± 1.0
C
178.0 ± 1.0
330.0 ± 1.0
D
60.0 ± 1.0
100.0 ± 1.0
B
Revision: 23-Jan-13
Document Number: 28547
143
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Ultra High Q/Low ESR
www.vishay.com
Vishay
ELECTRICAL CHARACTERISTICS
TYPICAL Q VALUE VS.FREQUENCY
SIZE 0402
TYPICAL Q VALUE VS. FREQUENCY
SIZE 0603, 250 V
10 000
10 000
1000
1000
100
Q
Q
1 pF
6.8 pF
0.3 pF
3.3 pF
100
10
6.8 pF
1
100
10
1000
10 000
0
0.5
1
TYPICAL ESR VS. FREQUENCY
SIZE 0402
10
1 pF
1.5 pF
3.3 pF
0.1
1
6.8 pF
2.5
3
3.5
3
3.5
0.3 pF
0.1
0.01
100
2
TYPICAL ESR VS. FREQUENCY
SIZE 0603, 250 V
ESR (Ω)
ESR (Ω)
1
1.5
FREQUENCY (GHz)
FREQUENCY (MHz)
3.3 pF
6.8 pF
0.01
1000
10 000
FREQUENCY (MHz)
0
0.5
1
1.5
2
2.5
FREQUENCY (GHz)
TYPICAL IMPEDANCE VS. FREQUENCY
SIZE 0402
100 000
IMPEDANCE (Ω)
10 000
1000
100
1 pF
1.5 pF
3.3 pF
10
6.8 pF
1
1
10
100
1000
10 000
FREQUENCY (MHz)
Revision: 23-Jan-13
Document Number: 28547
144
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Ultra High Q/Low ESR
www.vishay.com
Vishay
CONSTRUCTION
NO.
NAME
ULTRA HIGH Q
1
Ceramic material
BaTiO3 based
2
Inner electrode
Cu
3
4
Termination
5
Inner layer
Cu
Middle layer
Ni
Outer layer
Sn (matt)
3
4
5
1
2
STORAGE AND HANDLING CONDITIONS
(1) To store products at 5 °C to 40 °C ambient temperature and 20 % to 70 % related humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed.
Cautions:
a. Do not store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which
easily be resulted in poor soldering.
b. To store products on the shelf and avoid exposure to moisture.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 23-Jan-13
Document Number: 28547
145
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
VJ Non-Magnetic Series for
IR Reflow Soldering ............... 147
VJ Non-Magnetic Series for
Epoxy Bonding ...................... 163
MLCCs
for
Non-Magnetic
Applications
(NME Technology)
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Non-Magnetic Applications (IR Reflow Soldering)
FEATURES
•
•
•
•
•
•
•
•
Manufactured with non-magnetic materials
Safety screened for magnetic properties
C0G (NP0) and X7R / X5R dielectrics
Wide range of case sizes, voltage ratings,
and capacitance values
Suitable for IR reflow assembly methods
Wet built process
Reliable Noble Metal Electrode (NME) system
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
•
•
•
•
•
Magnetic Resonance Imaging (MRI)
Medical test and diagnostic equipment
Laboratory analysis systems
Navigation and electronic test equipment
Audio amplifiers
ELECTRICAL SPECIFICATIONS
NON-MAGNETIC C0G (NP0)
NON-MAGNETIC X7R / X5R
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 1.0 pF to 39 nF
Capacitance Range: 100 pF to 6.8 μF
Voltage Range: 10 VDC to 3000 VDC
Voltage Range: 6.3 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Temperature Coefficient of Capacitance (TCC):
X5R: ± 15 % from -55 °C to +85 °C, with 0 VDC applied
X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values  1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Dissipation Factor (DF):
 6.3 V, 10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz
16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
 50 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging: 0 % maximum per decade
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
 200 VDC-rated:
250 % of rated voltage
500 VDC-rated:
200 % of rated voltage
630 VDC, 1000 VDC-rated:
150 % of rated voltage
1500 VDC to 3000 VDC-rated:
120 % of rated voltage
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
 200 VDC-rated:
250 % of rated voltage
500 VDC-rated:
min. 150 % of rated voltage
630 VDC, 1000 VDC-rated: min. 120 % of rated voltage
1500 VDC, 3000 VDC-rated:
120 % of rated voltage
Revision: 27-Jan-15
Document Number: 45227
147
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE
MAXIMUM VOLTAGE
(V)
CAPACITANCE
MINIMUM
MAXIMUM
0402
100
1.0 pF
180 pF
0603
200
1.0 pF
1.5 nF
0805
500
1.0 pF
3.3 nF
1206
600
1.0 pF
10 nF
1210
500
1.0 pF
12 nF
1808
3000
10 pF
10 nF
1812
3000
10 pF
22 nF
1825
1000
15 pF
33 nF
2220
1000
100 pF
33 nF
2225
1000
120 pF
39 nF
0402
16
27 nF
47 nF
0603
6.3
120 nF
150 nF
0402
100
100 pF
22 nF
0603
100
270 pF
100 nF
0805
200
390 pF
390 nF
1206
500
680 pF
1.0 μF
1210
500
1.0 nF
1.0 μF
1808
3000
220 pF
270 nF
1812
3000
270 pF
1.0 μF
1825
1000
10 nF
2.7 μF
2220
3000
1.0 nF
2.2 μF
2225
2000
5.6 nF
4.7 μF
3640
500
15 nF
6.8 μF
C0G (NP0)
X5R
X7R
Note
• Detail ratings see “Selection Chart”
Revision: 27-Jan-15
Document Number: 45227
148
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
ORDERING INFORMATION
VJ0603
Y
102
K
C
A
A
C
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION
DC VOLTAGE
RATING (1)
MARKING
PACKAGING
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
3640
A = C0G
Y = X7R
G = X5R (2)
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An “R”
indicates a
decimal point.
Examples
102 = 1000 pF
1R0 = 1.0 pF
C0G (NP0):
< 10 pF
C = ± 0.25 pF
D = 0.5 pF
 10 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
X5R / X7R:
J=±5%
K = ± 10 %
M = ± 20 %
C (3) =
non-magnetic
copper barrier
termination
Q = 10 V
J = 16 V
X = 25 V
A = 50 V
K = 75 V
B = 100 V
C = 200 V
E = 500 V
L = 630 V
G = 1000 V
R = 1500 V
F = 2000 V
H = 3000 V
A=
unmarked
T = 7" reel / plastic tape
R = 11 1/4" / 13" reel / plastic tape
C = 7" reel / flamed paper tape
P = 11 1/4" / 13" reel /
flamed paper tape
J = 7" reel (low quantity)
Notes
(1) DC voltage rating should not be exceeded in application
(2) Selected values for X5R, see dielectric selection chart
(3) For soldering conditions see Vishay Soldering Recommendations www.vishay.com/doc?45034
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
TERMINATIONS
(P)
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
VJ0402
0.04 - 0.004 / + 0.005
(1.02 - 0.10 / + 0.12)
0.020 - 0.004 / + 0.006
(0.50 - 0.10 / + 0.14)
0.026
(0.640)
0.004
(0.100)
0.017
(0.420)
0603
VJ0603
0.063 - 0.006 / + 0.008
(1.60 - 0.15 / + 0.20)
0.031 - 0.006 / + 0.008
(0.80 - 0.15 / + 0.20)
0.037
(0.940)
0.012
(0.300)
0.019
(0.470)
0805
VJ0805
0.078 - 0.008 / + 0.010
(2.00 - 0.20 / + 0.25)
0.049 - 0.008 / + 0.009
(1.25 - 0.20 / + 0.23)
0.057
(1.450)
0.010
(0.250)
0.028
(0.710)
1206
VJ1206
0.126 - 0.010 / + 0.012
(3.20 - 0.25 / + 0.30)
0.063 - 0.010 / + 0.011
(1.60 - 0.25 / + 0.28)
0.067
(1.700)
0.010
(0.250)
0.028
(0.710)
1210
VJ1210
0.126 - 0.010 / + 0.012
(3.20 - 0.25 / + 0.30)
0.098 - 0.010 / + 0.011
(2.50 - 0.25 / + 0.28)
0.067
(1.700)
0.010
(0.250)
0.028
(0.710)
1808
VJ1808
0.177 - 0.012 / + 0.014
(4.50 - 0.30 / + 0.35)
0.078 - 0.010 / + 0.011
(2.03 - 0.25 / + 0.28)
0.086
(2.180)
0.010
(0.250)
0.030
(0.760)
1812
VJ1812
0.177 - 0.012 / + 0.014
(4.50 - 0.30 / + 0.35)
0.126 - 0.010 / + 0.011
(3.20 - 0.25 / + 0.28)
0.086
(2.180)
0.010
(0.250)
0.030
(0.760)
1825
VJ1825
0.177 - 0.012 / + 0.014
(4.50 - 0.30 / + 0.35)
0.252 - 0.010 / + 0.011
(6.40 - 0.25 / + 0.28)
0.086
(2.180)
0.010
(0.250)
0.030
(0.760)
2220
VJ2220
0.22 - 0.010 / + 0.012
(5.59 - 0.25 / + 0.30)
0.200 - 0.010 / + 0.011
(5.08 - 0.25 / + 0.28)
0.086
(2.180)
0.010
(0.250)
0.030
(0.760)
2225
VJ2225
0.22 - 0.010 / + 0.012
(5.59 - 0.25 / + 0.30)
0.250 - 0.010 / + 0.011
(6.35 - 0.25 / + 0.28)
0.086
(2.180)
0.010
(0.250)
0.030
(0.760)
3640
VJ3640
0.36 - 0.015 / + 0.017
(9.14 - 0.38 / + 0.43)
0.400 - 0.015 / + 0.017
(10.20 - 0.38 / + 0.43)
0.086
(2.180)
0.010
(0.250)
0.030
(0.760)
CASE
CODE
STYLE
0402
Revision: 27-Jan-15
Document Number: 45227
149
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
1R0
1.0 pF
1R2
1.2 pF
1R5
1.5 pF
1R8
1.8 pF
2R2
2.2 pF
2R7
2.7 pF
3R3
3.3 pF
3R9
3.9 pF
4R7
4.7 pF
5R6
5.6 pF
6R8
6.8 pF
8R2
8.2 pF
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
10
Q
VJ0402
0402
16
25
50
J
X
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
100
B
10
Q
16
J
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
C0G (NP0)
VJ0603
0603
25
50 100
X
A
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
200
C
10
Q
16
J
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ0805
0805
25
50 100
X
A
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
200
C
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 27-Jan-15
Document Number: 45227
150
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
1R0
1.0 pF
1R2
1.2 pF
1R5
1.5 pF
1R8
1.8 pF
2R2
2.2 pF
2R7
2.7 pF
3R3
3.3 pF
3R9
3.9 pF
4R7
4.7 pF
5R6
5.6 pF
6R8
6.8 pF
8R2
8.2 pF
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
C0G (NP0)
16
J
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1206
1206
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
200
C
500
E
600
N
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210
1210
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
200
C
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 27-Jan-15
Document Number: 45227
151
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
683
68 nF
C0G (NP0)
VJ1808
VJ1812
1808
1812
25 50 100 200 500 630 1000 1500 2000 3000 25 50 100 200 500 630 1000 1500 2000 3000
X A
B
C
E
L
G
R
F
H
X A B
C
E
L
G
R
F
H
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 27-Jan-15
Document Number: 45227
152
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
683
68 nF
25
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C0G (NP0)
VJ1825
VJ2220
1825
2220
50 100 200 500 630 1000 25 50 100 200 500 630 1000
A
B
C
E
L
G
X A
B
C
E
L
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ2225
2225
100 200 500 630
B
C
E
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1000
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 27-Jan-15
Document Number: 45227
153
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
VJ0402
CASE CODE
0402
6.3
10
16
25 50 100
6.3
VOLTAGE (VDC)
VOLTAGE CODE
Y
Q
J
X A
B
Y
CAP. CODE
CAP.
101
100 pF
••
••
••
•• •• ••
121
120 pF
••
••
••
•• •• ••
151
150 pF
••
••
••
•• •• ••
181
180 pF
••
••
••
•• •• ••
221
220 pF
••
••
••
•• •• ••
271
270 pF
••
••
••
•• •• ••
••
331
330 pF
••
••
••
•• •• ••
••
391
390 pF
••
••
••
•• •• ••
••
471
470 pF
••
••
••
•• •• ••
••
561
560 pF
••
••
••
•• •• ••
••
681
680 pF
••
••
••
•• •• ••
••
821
820 pF
••
••
••
•• •• ••
••
102
1.0 nF
••
••
••
•• •• ••
••
122
1.2 nF
••
••
••
•• •• ••
••
152
1.5 nF
••
••
••
•• •• ••
••
182
1.8 nF
••
••
••
•• •• ••
••
222
2.2 nF
••
••
••
•• •• ••
••
272
2.7 nF
••
••
••
•• •• ••
••
332
3.3 nF
••
••
••
•• •• ••
••
392
3.9 nF
••
••
••
•• •• ••
••
472
4.7 nF
••
••
••
•• •• ••
••
562
5.6 nF
••
••
••
•• ••
••
682
6.8 nF
••
••
••
•• ••
••
822
8.2 nF
••
••
••
•• ••
••
103
10 nF
••
••
••
•• ••
••
123
12 nF
••
••
••
••
••
153
15 nF
••
••
••
••
••
183
18 nF
••
••
••
••
223
22 nF
••
••
••
••
273
27 nF X5R •• X5R •• X5R ••
••
333
33 nF X5R •• X5R •• X5R ••
••
393
39 nF X5R ••
••
473
47 nF X5R ••
••
563
56 nF
••
683
68 nF
••
823
82 nF
••
104
100 nF
••
124
120 nF
X5R ••
154
150 nF
X5R ••
184
180 nF
224
220 nF
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
125
1.2 μF
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
(1) See selection chart for values only available as X5R. All other values X7R.
Revision: 27-Jan-15
X7R / X5R (1)
VJ0603
0603
10 16 25
Q
J
X
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
50
A
100
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
10
Q
16
J
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ0805
0805
25 50
X
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100
B
200
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45227
154
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
X7R
CAP.
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
27 nF
33 nF
39 nF
47 nF
56 nF
68 nF
82 nF
100 nF
120 nF
150 nF
180 nF
220 nF
270 nF
330 nF
390 nF
470 nF
560 nF
680 nF
820 nF
1.0 μF
1.2 μF
16
J
25
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1206
1206
50
100
A
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
200
C
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
16
J
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210
1210
75
K
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100
B
200
C
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 27-Jan-15
Document Number: 45227
155
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ1808
VJ1812
CASE CODE
1808
1812
25 50 100 200 500 630 1000 1500 2000 3000 25 50 75 100 200 250 500 630 1000 1500 2000 3000
VOLTAGE (VDC)
VOLTAGE CODE
X A B
C
E
L
G
R
F
H
X A K B
C
P
E
L
G
R
F
H
CAP. CODE CAP.
•
221
220 pF
271
270 pF
•
•
•
•
•
•
471
470 pF
•
•
•
•
•
•
•
•
•
•
561
560 pF
•
•
•
•
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
•
•
•
•
102
1.0 nF • •
•
•
•
•
•
•
•
•
•
•
•
•
•
122
1.2 nF • •
•
•
•
•
•
•
•
•
•
•
•
•
•
152
1.5 nF • •
•
•
•
•
•
•
•
•
•
•
•
•
•
182
1.8 nF • •
•
•
•
•
•
•
•
•
•
•
•
•
222
2.2 nF • •
•
•
•
•
•
•
•
•
•
•
•
•
272
2.7 nF • •
•
•
•
•
•
•
•
•
•
•
•
332
3.3 nF • •
•
•
•
•
•
•
•
•
•
•
•
392
3.9 nF • •
•
•
•
•
•
•
• • •
•
•
•
•
•
•
•
•
472
4.7 nF • •
•
•
•
•
•
•
• • •
•
•
•
•
•
•
•
•
562
5.6 nF • •
•
•
•
•
•
•
• • •
•
•
•
•
•
•
•
•
682
6.8 nF • •
•
•
•
•
•
•
• • •
•
•
•
•
•
•
•
•
822
8.2 nF • •
•
•
•
•
•
• • •
•
•
•
•
•
•
•
103
10 μF
• •
•
•
•
•
•
• • •
•
•
•
•
•
•
•
• •
•
•
•
•
•
• • •
•
•
•
•
•
•
123
12 μF
153
15 μF
• •
•
•
•
•
•
• • •
•
•
•
•
•
•
183
18 nF
• •
•
•
•
•
•
• • •
•
•
•
•
•
•
223
22 nF
• •
•
•
•
• • •
•
•
•
•
•
•
273
27 nF
• •
•
•
•
• • •
•
•
•
•
•
•
333
33 nF
• •
•
•
• • •
•
•
•
•
•
393
39 nF
• •
•
•
• • •
•
•
•
•
•
473
47 nF
• •
•
•
• • •
•
•
•
•
•
563
56 nF
• •
•
•
• • •
•
•
•
•
•
683
68 nF
• •
•
•
• • •
•
•
•
•
•
823
82 nF
• •
•
•
• • •
•
•
•
•
•
104
100 nF • •
•
•
• • •
•
•
•
•
•
124
120 nF • •
•
• • •
•
•
•
•
154
150 nF • •
•
• • •
•
•
•
184
180 nF • •
•
• • •
•
•
•
224
220 nF • •
• • •
•
•
•
274
270 nF • •
• • •
•
•
•
334
330 nF
• • •
•
•
•
394
390 nF
• • •
•
•
474
470 nF
• • •
•
•
564
560 nF
• • •
•
684
680 nF
• • •
•
824
820 nF
• • •
•
105
1.0 μF
• •
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
825
8.2 μF
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 27-Jan-15
Document Number: 45227
156
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
25
VOLTAGE (VDC)
VOLTAGE CODE
X
CAP. CODE
CAP.
221
220 pF
271
270 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
•
•
123
12 nF
153
15 nF
•
183
18 nF
•
223
22 nF
•
273
27 nF
•
333
33 nF
•
393
39 nF
•
473
47 nF
•
563
56 nF
•
683
68 nF
•
823
82 nF
•
104
100 nF
•
124
120 nF
•
154
150 nF
•
184
180 nF
•
224
220 nF
•
274
270 nF
•
334
330 nF
•
394
390 nF
•
474
470 nF
•
564
560 nF
•
684
680 nF
•
824
820 nF
•
105
1.0 μF
•
125
1.2 μF
•
155
1.5 μF
•
185
1.8 μF
•
225
2.2 μF
•
275
2.7 μF
•
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
825
8.2 μF
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 27-Jan-15
X7R
50
A
VJ1825
1825
100 200 500
B
C
E
630
L
1000
G
25
X
50
A
100
B
VJ2220
2220
200 500 630
C
E
L
1000 2000 3000
G
F
H
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45227
157
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
335
395
475
565
685
825
X7R
25
X
CAP.
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
27 nF
33 nF
39 nF
47 nF
56 nF
68 nF
82 nF
100 nF
120 nF
150 nF
180 nF
220 nF
270 nF
330 nF
390 nF
470 nF
560 nF
680 nF
820 nF
1.0 μF
1.2 μF
1.5 μF
1.8 μF
2.2 μF
2.7 μF
3.3 μF
3.9 μF
4.7 μF
5.6 μF
6.8 μF
8.2 μF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ2225
2225
200
500
630
C
E
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1000
G
•
•
•
•
•
•
•
•
•
•
•
•
•
1500
R
2000
F
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ3640
3640
100
200
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 27-Jan-15
Document Number: 45227
158
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
NON-MAGNETIC C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
MIN. INSULATION RESISTANCE VS. TEMPERATURE
TEMPERATURE COEFFICIENT OF CAPACITANCE
10 000
INSULATION RESISTANCE (ΩF)
% CAPACITANCE CHANGE
2.0
1.5
1.0
0.5
0.0
- 0.5
NP0
- 1.0
- 1.5
1000
100
10
- 2.0
- 75 - 50 - 25
10
0 25 50 75 100 125 150 175
TEMPERATURE °C
AGING RATE
VOLTAGE COEFFICIENT OF CAPACITANCE
% CAPACITANCE CHANGE
30
0.1
0.0
- 0.1
20
10
0
- 10
- 20
- 30
- 0.2
1
10
100
HOURS
1000
0
10 000
600 700
800 900 1000
0.001
DISSIPATION FACTOR
1
0.0005
0
-1
-2
Revision: 27-Jan-15
300 400 500
DISSIPATION FACTOR VS. FREQUENCY
CHANGE OF CAPACITANCE WITH FREQUENCY
1 kHz
100 200
DC VOLTS APPLIED
2
% CAPACITANCE CHANGE
100 125
TEMPERATURE °C
0.2
% CAPACITANCE CHANGE
25
10 kHz
100 kHz
FREQUENCY
1 MHz
0.00025
1 kHz
10 kHz
100 kHz
FREQUENCY
1 MHz
Document Number: 45227
159
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
NON-MAGNETIC X7R DIELECTRIC - TYPICAL PARAMETERS
RATED VOLTAGE VS. TEMPERATURE
MIN. INSULATION RESISTANCE VS. TEMPERATURE
INSULATION RESISTANCE (ΩF)
10 000
% RATED VOLTAGE
200
150
100
50
0
20
50
100
10
10
0
- 75 - 50 - 25
1000
75 100 125 150 175
25
150
100
TEMPERATURE °C
TEMPERATURE °C
AGING RATE
DISSIPATION FACTOR VS. TEMPERATURE
1.0
6.0
% DISSIPATION FACTOR
% CAPACITANCE CHANGE
5.5
0.0
- 1.0
- 2.0
- 3.0
- 4.0
1
10
100
1000
5.0
4.5
4.0
3.5
3.0
2.5
X7R
2.0
1.5
1.0
0.5
0.0
10 000
- 75 - 50 - 25
25
50
75 100 125 150 175
DISSIPATION FACTOR VS. VOLTAGE
DISSIPATION FACTOR VS. VOLTAGE
0.020
DISSIPATION FACTOR
0.020
DISSIPATION FACTOR
0
TEMPERATURE °C
HOURS
0.016
0.012
50 V
0.008
100 V
0.016
0.012
0.008
200 V
500 V
0.004
0.004
0
10
20
30
40
50
60
DC VOLTS APPLIED
Revision: 27-Jan-15
70
80
90
100
UN/V-
0
100
200
300
400
DC VOLTS APPLIED
500
600
700
UN/V-
Document Number: 45227
160
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
NON-MAGNETIC X7R DIELECTRIC - TYPICAL PARAMETERS
IMPEDANCE VS. FREQUENCY 500 V/630 V
IMPEDANCE VS. FREQUENCY 2000 V
1000
1000
IMPEDANCE (Ω)
IMPEDANCE (Ω)
100
10
1
0.01 µF
0.1 µF
1 µF
100
10
4.7 nF 2.2 nF
0.1
0.01
0.01
0.1
0.1
10
1
1
100
10
100
1000
FREQUENCY (MHz)
FREQUENCY (MHz)
VOLTAGE COEFFICIENT OF CAPACITANCE
LOWER CAPACITANCE
VOLTAGE COEFFICIENT OF CAPACITANCE
10
5
0
% CAPACITANCE CHANGE
0
% CAPACITANCE CHANGE
1 nF
1
5
- 10
100 V
RATED
25 V
RATED
- 15
50 V
RATED
- 20
- 25
- 10
- 20
- 30
- 40
- 50
Case Size
1206
1210
1808
1812
- 60
- 70
Range
100 pF to 4700 pF
390 pF to 10 000 pF
470 pF to 18 000 pF
1000 pF to 27 000 pF
- 80
- 30
0
10
20
30
40
50
60
70
80
90
100
0
100
300
200
DC VOLTS APPLIED
400
500
600
700
DC VOLTS APPLIED
VOLTAGE COEFFICIENT OF CAPACITANCE
10
% CAPACITANCE CHANGE
0
- 10
- 20
- 30
- 40
- 50
2000 V RATED
- 60
1000 V/1500 V RATED
- 70
- 80
0
500
1000
1500
2000
2500
DC VOLTS APPLIED
Revision: 27-Jan-15
Document Number: 45227
161
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for IR Reflow Soldering
www.vishay.com
Vishay Vitramon
STANDARD PACKAGING QUANTITIES
(1)(2)(3)
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
CASE
CODE
TAPE
SIZE
PAPER TAPE
PACKAGING CODE
“C”
PLASTIC TAPE
PACKAGING CODE
“T”
LOW QUANTITY
PACKAGING CODE
“J”
PAPER TAPE
PACKAGING CODE
“P”
PLASTIC TAPE
PACKAGING CODE
“R”
0402
8 mm
5000
n/a
1000
10 000
n/a
0603
(4)
8 mm
4000
4000
1000
10 000
10 000
0805
(4)
8 mm
3000
3000
1000
10 000
10 000
1206 (4)
8 mm
n/a
3000 / 2500
1000
n/a
10 000 / 9000
1210
8 mm
n/a
3000 / 2500 / 2000
1000
n/a
10 000 / 9000
1808
12 mm
n/a
2000
500
n/a
10 000
1812
12 mm
n/a
1000
500
n/a
4000
1825
12 mm
n/a
1000
500
n/a
4000
2220
12 mm
n/a
1000
500
n/a
4000
2225
12 mm
n/a
1000
500
n/a
4000
3640
16 mm
n/a
500
n/a
n/a
n/a
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape
(2) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(3) n/a = not available
(4) Packaging code “T/R” and lower quantities can depend on product thickness
STORAGE AND HANDLING CONDITIONS
(1) Store the components at +5 °C to +40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 1 year after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt, or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight, and so on.
Revision: 27-Jan-15
Document Number: 45227
162
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for Non-Magnetic Applications (Epoxy Bonding)
FEATURES
•
•
•
•
•
•
•
•
Manufactured with non-magnetic materials
Safety screened for magnetic properties
C0G (NP0) and X7R / X5R dielectrics
Wide range of case sizes, voltage ratings,
and capacitance values
Suitable for conductive epoxy bonding
Wet built process
Reliable Noble Metal Electrode (NME) system
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
•
•
•
•
•
•
•
Magnetic Resonance Imaging (MRI)
Medical test and diagnostic equipment
Hi-rel medical systems
Hi-rel aviation systems
Laboratory analysis systems
Navigation and electronic test equipment
Audio amplifiers
ELECTRICAL SPECIFICATIONS
NON-MAGNETIC C0G (NP0)
NON-MAGNETIC X7R / X5R
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 1.0 pF to 39 nF
Capacitance Range: 100 pF to 6.8 μF
Voltage Range: 10 VDC to 3000 VDC
Voltage Range: 6.3 VDC to 3000 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Temperature Coefficient of Capacitance (TCC):
X5R: ± 15 % from -55 °C to +85 °C, with 0 VDC applied
X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values  1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Dissipation Factor (DF):
 6.3 V, 10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz
16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
 50 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging: 0 % maximum per decade
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
250 % of rated voltage
 200 VDC-rated:
500 VDC-rated:
200 % of rated voltage
630 VDC, 1000 VDC-rated:
150 % of rated voltage
1500 VDC to 3000 VDC-rated:
120 % of rated voltage
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
 200 VDC-rated:
250 % of rated voltage
500 VDC-rated:
min. 150 % of rated voltage
630 VDC, 1000 VDC-rated:
150 % of rated voltage
1500 VDC, 3000 VDC-rated:
120 % of rated voltage
Revision: 08-Oct-14
Document Number: 45128
163
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE
MAXIMUM VOLTAGE
(V)
CAPACITANCE
MINIMUM
MAXIMUM
0402
100
1.0 pF
180 pF
0603
200
1.0 pF
1.5 nF
0805
500
1.0 pF
3.3 nF
1206
600
1.0 pF
10 nF
1210
500
1.0 pF
12 nF
1808
3000
10 pF
10 nF
1812
3000
10 pF
22 nF
1825
1000
15 pF
33 nF
2220
1000
100 pF
33 nF
2225
1000
120 pF
39 nF
0402
16
27 nF
47 nF
0603
6.3
120 nF
150 nF
0402
100
100 pF
22 nF
0603
100
270 pF
100 nF
0805
200
390 pF
390 nF
1206
500
680 pF
1.0 μF
1210
500
1.0 nF
1.0 μF
1808
3000
220 pF
270 nF
1812
3000
270 pF
1.0 μF
1825
1000
10 nF
2.7 μF
2220
3000
1.0 nF
2.2 μF
2225
2000
5.6 nF
4.7 μF
3640
500
15 nF
6.8 μF
C0G (NP0)
X5R
X7R
Note
• Detail ratings see “Selection Chart”
Revision: 08-Oct-14
Document Number: 45128
164
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
ORDERING INFORMATION
VJ0603
Y
102
K
N
A
A
O
CASE
CODE
DIELECTRIC
CAPACITANCE
NOMINAL CODE
CAPACITANCE
TOLERANCE
TERMINATION
DC VOLTAGE
RATING (1)
MARKING
PACKAGING
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
3640
A = C0G
Y = X7R
G = X5R (2)
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An “R”
indicates a
decimal point.
Examples
102 = 1000 pF
1R0 = 1.0 pF
C0G(NP0):
< 10 pF
C = ± 0.25 pF
D = 0.5 pF
 10 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
X5R / X7R:
J=±5%
K = ± 10 %
M = ± 20 %
N=
non-magnetic
Q = 10 V
J = 16 V
X = 25 V
A = 50 V
K = 75 V
B = 100 V
C = 200 V
E = 500 V
L = 630 V
G = 1000 V
R = 1500 V
F = 2000 V
H = 3000 V
A=
unmarked
T = 7" reel / plastic tape
R = 11 1/4" / 13" reel / plastic tape
O = 7" reel / flamed paper tape
I = 11 1/4" / 13" reel /
flamed paper tape
J = 7" reel (low quantity)
Notes
(1) DC voltage rating should not be exceeded in application
(2) Selected values for X5R, see dielectric selection chart
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
CASE
CODE
STYLE
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
0402
VJ0402
0603
VJ0603
0805
VJ0805
1206
VJ1206
1210
VJ1210
1808
VJ1808
1812
VJ1812
1825
VJ1825
2220
VJ2220
2225
VJ2225
3640
VJ3640
0.040 + 0.006 / - 0.004
(1.00 + 0.15 / - 0.10)
0.063 ± 0.006
(1.60 ± 0.15)
0.079 ± 0.008
(2.00 ± 0.20)
0.126 ± 0.010
(3.20 ± 0.25)
0.126 ± 0.010
(3.20 ± 0.25)
0.177 ± 0.012
(4.50 ± 0.30)
0.177 ± 0.012
(4.50 ± 0.30)
0.177 ± 0.012
(4.50 ± 0.30)
0.220 ± 0.008
(5.59 ± 0.20)
0.220 ± 0.010
(5.59 ± 0.25)
0.360 ± 0.015
(9.14 ± 0.38)
0.020 ± 0.004
(0.50 ± 0.10)
0.031 ± 0.006
(0.80 ± 0.15)
0.049 ± 0.008
(1.25 ± 0.20)
0.063 ± 0.010
(1.60 ± 0.25)
0.098 ± 0.010
(2.50 ± 0.25)
0.080 ± 0.010
(2.03 ± 0.25)
0.126 ± 0.010
(3.20 ± 0.25)
0.252 ± 0.010
(6.40 ± 0.25)
0.200 ± 0.010
(5.08 ± 0.25)
0.250 ± 0.010
(6.35 ± 0.25)
0.400 ± 0.015
(10.20 ± 0.38)
0.024
(0.60)
0.038
(0.92)
0.057
(1.45)
0.067
(1.70)
0.067
(1.70)
0.067
(1.70)
0.086
(2.18)
0.086
(2.18)
0.086
(2.18)
0.086
(2.18)
0.086
(2.18)
Revision: 08-Oct-14
TERMINATIONS
(P)
MINIMUM
MAXIMUM
0.004
0.016
(0.10)
(0.41)
0.012
0.018
(0.30)
(0.46)
0.010
0.028
(0.25)
(0.71)
0.010
0.028
(0.25)
(0.71)
0.010
0.028
(0.25)
(0.71)
0.010
0.030
(0.25)
(0.76)
0.010
0.030
(0.25)
(0.76)
0.010
0.030
(0.25)
(0.76)
0.010
0.030
(0.25)
(0.76)
0.010
0.030
(0.25)
(0.76)
0.010
0.030
(0.25)
(0.76)
Document Number: 45128
165
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
1R0
1.0 pF
1R2
1.2 pF
1R5
1.5 pF
1R8
1.8 pF
2R2
2.2 pF
2R7
2.7 pF
3R3
3.3 pF
3R9
3.9 pF
4R7
4.7 pF
5R6
5.6 pF
6R8
6.8 pF
8R2
8.2 pF
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
10
Q
VJ0402
0402
16
25
50
J
X
A
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
100
B
10
Q
16
J
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
C0G (NP0)
VJ0603
0603
25
50 100
X
A
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
200
C
10
Q
16
J
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ0805
0805
25
50 100
X
A
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
200
C
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 08-Oct-14
Document Number: 45128
166
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
1R0
1.0 pF
1R2
1.2 pF
1R5
1.5 pF
1R8
1.8 pF
2R2
2.2 pF
2R7
2.7 pF
3R3
3.3 pF
3R9
3.9 pF
4R7
4.7 pF
5R6
5.6 pF
6R8
6.8 pF
8R2
8.2 pF
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
C0G (NP0)
16
J
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1206
1206
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
200
C
500
E
600
N
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210
1210
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
200
C
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 08-Oct-14
Document Number: 45128
167
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
683
68 nF
C0G (NP0)
VJ1808
VJ1812
1808
1812
25 50 100 200 500 630 1000 1500 2000 3000 25 50 100 200 500 630 1000 1500 2000 3000
X A
B
C
E
L
G
R
F
H
X A B
C
E
L
G
R
F
H
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 08-Oct-14
Document Number: 45128
168
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
153
15 nF
183
18 nF
223
22 nF
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
683
68 nF
25
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C0G (NP0)
VJ1825
VJ2220
1825
2220
50 100 200 500 630 1000 25 50 100 200 500 630 1000
A
B
C
E
L
G
X A
B
C
E
L
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ2225
2225
100 200 500 630
B
C
E
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1000
G
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 08-Oct-14
Document Number: 45128
169
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
VJ0402
CASE CODE
0402
6.3
10
16
25 50 100
6.3
VOLTAGE (VDC)
VOLTAGE CODE
Y
Q
J
X A
B
Y
CAP. CODE
CAP.
101
100 pF
••
••
••
•• •• ••
121
120 pF
••
••
••
•• •• ••
151
150 pF
••
••
••
•• •• ••
181
180 pF
••
••
••
•• •• ••
221
220 pF
••
••
••
•• •• ••
271
270 pF
••
••
••
•• •• ••
••
331
330 pF
••
••
••
•• •• ••
••
391
390 pF
••
••
••
•• •• ••
••
471
470 pF
••
••
••
•• •• ••
••
561
560 pF
••
••
••
•• •• ••
••
681
680 pF
••
••
••
•• •• ••
••
821
820 pF
••
••
••
•• •• ••
••
102
1.0 nF
••
••
••
•• •• ••
••
122
1.2 nF
••
••
••
•• •• ••
••
152
1.5 nF
••
••
••
•• •• ••
••
182
1.8 nF
••
••
••
•• •• ••
••
222
2.2 nF
••
••
••
•• •• ••
••
272
2.7 nF
••
••
••
•• •• ••
••
332
3.3 nF
••
••
••
•• •• ••
••
392
3.9 nF
••
••
••
•• •• ••
••
472
4.7 nF
••
••
••
•• •• ••
••
562
5.6 nF
••
••
••
•• ••
••
682
6.8 nF
••
••
••
•• ••
••
822
8.2 nF
••
••
••
•• ••
••
103
10 nF
••
••
••
•• ••
••
123
12 nF
••
••
••
••
••
153
15 nF
••
••
••
••
••
183
18 nF
••
••
••
••
223
22 nF
••
••
••
••
273
27 nF X5R •• X5R •• X5R ••
••
333
33 nF X5R •• X5R •• X5R ••
••
393
39 nF X5R ••
••
473
47 nF X5R ••
••
563
56 nF
••
683
68 nF
••
823
82 nF
••
104
100 nF
••
124
120 nF
X5R ••
154
150 nF
X5R ••
184
180 nF
224
220 nF
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
125
1.2 μF
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
(1) See selection chart for values only available as X5R. All other values X7R.
Revision: 08-Oct-14
X7R / X5R (1)
VJ0603
0603
10 16 25
Q
J
X
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
50
A
100
B
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
10
Q
16
J
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ0805
0805
25 50
X
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100
B
200
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45128
170
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
101
121
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
X7R
CAP.
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
390 pF
470 pF
560 pF
680 pF
820 pF
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
27 nF
33 nF
39 nF
47 nF
56 nF
68 nF
82 nF
100 nF
120 nF
150 nF
180 nF
220 nF
270 nF
330 nF
390 nF
470 nF
560 nF
680 nF
820 nF
1.0 μF
1.2 μF
16
J
25
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1206
1206
50
100
A
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
200
C
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
16
J
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210
1210
75
K
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100
B
200
C
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 08-Oct-14
Document Number: 45128
171
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ1808
VJ1812
CASE CODE
1808
1812
25 50 100 200 500 630 1000 1500 2000 3000 25 50 75 100 200 250 500 630 1000 1500 2000 3000
VOLTAGE (VDC)
VOLTAGE CODE
X A B
C
E
L
G
R
F
H
X A K B
C
P
E
L
G
R
F
H
CAP. CODE CAP.
•
221
220 pF
271
270 pF
•
•
•
•
•
•
471
470 pF
•
•
•
•
•
•
•
•
•
•
561
560 pF
•
•
•
•
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
•
•
•
•
102
1.0 nF • •
•
•
•
•
•
•
•
•
•
•
•
•
•
122
1.2 nF • •
•
•
•
•
•
•
•
•
•
•
•
•
•
152
1.5 nF • •
•
•
•
•
•
•
•
•
•
•
•
•
•
182
1.8 nF • •
•
•
•
•
•
•
•
•
•
•
•
•
222
2.2 nF • •
•
•
•
•
•
•
•
•
•
•
•
•
272
2.7 nF • •
•
•
•
•
•
•
•
•
•
•
•
332
3.3 nF • •
•
•
•
•
•
•
•
•
•
•
•
392
3.9 nF • •
•
•
•
•
•
•
• • •
•
•
•
•
•
•
•
•
472
4.7 nF • •
•
•
•
•
•
•
• • •
•
•
•
•
•
•
•
•
562
5.6 nF • •
•
•
•
•
•
•
• • •
•
•
•
•
•
•
•
•
682
6.8 nF • •
•
•
•
•
•
•
• • •
•
•
•
•
•
•
•
•
822
8.2 nF • •
•
•
•
•
•
• • •
•
•
•
•
•
•
•
103
10 μF
• •
•
•
•
•
•
• • •
•
•
•
•
•
•
•
• •
•
•
•
•
•
• • •
•
•
•
•
•
•
123
12 μF
153
15 μF
• •
•
•
•
•
•
• • •
•
•
•
•
•
•
183
18 nF
• •
•
•
•
•
•
• • •
•
•
•
•
•
•
223
22 nF
• •
•
•
•
• • •
•
•
•
•
•
•
273
27 nF
• •
•
•
•
• • •
•
•
•
•
•
•
333
33 nF
• •
•
•
• • •
•
•
•
•
•
393
39 nF
• •
•
•
• • •
•
•
•
•
•
473
47 nF
• •
•
•
• • •
•
•
•
•
•
563
56 nF
• •
•
•
• • •
•
•
•
•
•
683
68 nF
• •
•
•
• • •
•
•
•
•
•
823
82 nF
• •
•
•
• • •
•
•
•
•
•
104
100 nF • •
•
•
• • •
•
•
•
•
•
124
120 nF • •
•
• • •
•
•
•
•
154
150 nF • •
•
• • •
•
•
•
184
180 nF • •
•
• • •
•
•
•
224
220 nF • •
• • •
•
•
•
274
270 nF • •
• • •
•
•
•
334
330 nF
• • •
•
•
•
394
390 nF
• • •
•
•
474
470 nF
• • •
•
•
564
560 nF
• • •
•
684
680 nF
• • •
•
824
820 nF
• • •
•
105
1.0 μF
• •
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
825
8.2 μF
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 08-Oct-14
Document Number: 45128
172
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
25
VOLTAGE (VDC)
VOLTAGE CODE
X
CAP. CODE
CAP.
221
220 pF
271
270 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
•
123
12 nF
•
153
15 nF
•
183
18 nF
•
223
22 nF
•
273
27 nF
•
333
33 nF
•
393
39 nF
•
473
47 nF
•
563
56 nF
•
683
68 nF
•
823
82 nF
•
104
100 nF
•
124
120 nF
•
154
150 nF
•
184
180 nF
•
224
220 nF
•
274
270 nF
•
334
330 nF
•
•
394
390 nF
474
470 nF
•
564
560 nF
•
684
680 nF
•
824
820 nF
•
105
1.0 μF
•
125
1.2 μF
•
155
1.5 μF
•
185
1.8 μF
•
225
2.2 μF
•
275
2.7 μF
•
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
825
8.2 μF
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 08-Oct-14
X7R
50
A
VJ1825
1825
100 200 500
B
C
E
630
L
1000
G
25
X
50
A
100
B
VJ2220
2220
200 500 630
C
E
L
1000 2000 3000
G
F
H
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45128
173
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
335
395
475
565
685
825
X7R
25
X
CAP.
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
27 nF
33 nF
39 nF
47 nF
56 nF
68 nF
82 nF
100 nF
120 nF
150 nF
180 nF
220 nF
270 nF
330 nF
390 nF
470 nF
560 nF
680 nF
820 nF
1.0 μF
1.2 μF
1.5 μF
1.8 μF
2.2 μF
2.7 μF
3.3 μF
3.9 μF
4.7 μF
5.6 μF
6.8 μF
8.2 μF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ2225
2225
200
500
630
C
E
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1000
G
•
•
•
•
•
•
•
•
•
•
•
•
•
1500
R
2000
F
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ3640
3640
100
200
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
RoHS-compliant
•• Flamed paper tape • Plastic tape
Revision: 08-Oct-14
Document Number: 45128
174
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
NON-MAGNETIC C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
MIN. INSULATION RESISTANCE VS. TEMPERATURE
TEMPERATURE COEFFICIENT OF CAPACITANCE
10 000
INSULATION RESISTANCE (ΩF)
% CAPACITANCE CHANGE
2.0
1.5
1.0
0.5
0.0
-0.5
NP0
-1.0
-1.5
1000
100
10
-2.0
-75 -50 -25
10
0 25 50 75 100 125 150 175
TEMPERATURE °C
AGING RATE
VOLTAGE COEFFICIENT OF CAPACITANCE
% CAPACITANCE CHANGE
30
0.1
0.0
-0.1
20
10
0
-10
-20
-30
-0.2
1
10
100
HOURS
1000
0
10 000
600 700
800 900 1000
0.001
DISSIPATION FACTOR
1
0.0005
0
-1
-2
Revision: 08-Oct-14
300 400 500
DISSIPATION FACTOR VS. FREQUENCY
CHANGE OF CAPACITANCE WITH FREQUENCY
1 kHz
100 200
DC VOLTS APPLIED
2
% CAPACITANCE CHANGE
100 125
TEMPERATURE °C
0.2
% CAPACITANCE CHANGE
25
10 kHz
100 kHz
FREQUENCY
1 MHz
0.00025
1 kHz
10 kHz
100 kHz
FREQUENCY
1 MHz
Document Number: 45128
175
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
NON-MAGNETIC X7R DIELECTRIC - TYPICAL PARAMETERS
RATED VOLTAGE VS. TEMPERATURE
MIN. INSULATION RESISTANCE VS. TEMPERATURE
INSULATION RESISTANCE (ΩF)
10 000
% RATED VOLTAGE
200
150
100
50
-25
0
20
50
75
100
10
10
0
-75 -50
1000
100 125 150 175
25
150
100
TEMPERATURE °C
TEMPERATURE °C
AGING RATE
DISSIPATION FACTOR VS. TEMPERATURE
1.0
6.0
% DISSIPATION FACTOR
% CAPACITANCE CHANGE
5.5
0.0
-1.0
-2.0
-3.0
-4.0
1
10
100
1000
5.0
4.5
4.0
3.5
3.0
2.5
X7R
2.0
1.5
1.0
0.5
0.0
10 000
-75
-50 -25
20
50
75
100 125 150 175
DISSIPATION FACTOR VS. VOLTAGE
DISSIPATION FACTOR VS. VOLTAGE
0.020
DISSIPATION FACTOR
0.020
DISSIPATION FACTOR
0
TEMPERATURE °C
HOURS
0.016
0.012
50 V
0.008
100 V
0.016
0.012
0.008
200 V
500 V
0.004
0.004
0
10
20
30
40
50
60
DC VOLTS APPLIED
Revision: 08-Oct-14
70
80
90
100
UN/V-
0
100
200
300
400
DC VOLTS APPLIED
500
600
700
UN/V-
Document Number: 45128
176
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
NON-MAGNETIC X7R DIELECTRIC - TYPICAL PARAMETERS
IMPEDANCE VS. FREQUENCY 500 V/630 V
IMPEDANCE VS. FREQUENCY 2000 V
1000
1000
IMPEDANCE (Ω)
IMPEDANCE (Ω)
100
10
1
0.01 µF
0.1 µF
1 µF
100
10
4.7 nF 2.2 nF
0.1
0.01
0.01
0.1
0.1
10
1
1
100
10
100
1000
FREQUENCY (MHz)
FREQUENCY (MHz)
VOLTAGE COEFFICIENT OF CAPACITANCE
LOWER CAPACITANCE
VOLTAGE COEFFICIENT OF CAPACITANCE
10
5
0
% CAPACITANCE CHANGE
0
% CAPACITANCE CHANGE
1 nF
1
5
-10
100 V
RATED
25 V
RATED
-15
50 V
RATED
-20
-25
-10
-20
-30
-40
-50
Case Size
1206
1210
1808
1812
-60
-70
Range
100 pF to 4700 pF
390 pF to 10 000 pF
470 pF to 18 000 pF
1000 pF to 27 000 pF
-80
-30
0
10
20
30
40
50
60
70
80
90
100
0
200
100
DC VOLTS APPLIED
300
400
500
600
700
DC VOLTS APPLIED
VOLTAGE COEFFICIENT OF CAPACITANCE
10
% CAPACITANCE CHANGE
0
-10
-20
-30
-40
-50
2000 V RATED
-60
1000 V/1500 V RATED
-70
-80
0
500
1000
1500
2000
2500
DC VOLTS APPLIED
Revision: 08-Oct-14
Document Number: 45128
177
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Non-Magnetic Series for Epoxy Bonding
www.vishay.com
Vishay Vitramon
STANDARD PACKAGING QUANTITIES
(1)(2)(3)
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
CASE
CODE
TAPE
SIZE
PAPER TAPE
PACKAGING CODE
“O”
PLASTIC TAPE
PACKAGING CODE
“T”
LOW QUANTITY
PACKAGING CODE
“J”
PAPER TAPE
PACKAGING CODE
“I”
PLASTIC TAPE
PACKAGING CODE
“R”
0402
8 mm
5000
n/a
1000
10 000
n/a
0603
(4)
8 mm
4000
4000
1000
10 000
10 000
0805
(4)
8 mm
3000
3000
1000
10 000
10 000
1206 (4)
8 mm
n/a
3000 / 2500
1000
n/a
10 000 / 9000
1210 (4)
8 mm
n/a
3000 / 2500 / 2000
1000
n/a
10 000 / 9000
1808
12 mm
n/a
2000
500
n/a
10 000
1812
12 mm
n/a
1000
500
n/a
4000
1825
12 mm
n/a
1000
500
n/a
4000
2220
12 mm
n/a
1000
500
n/a
4000
2225
12 mm
n/a
1000
500
n/a
4000
3640
16 mm
n/a
500
n/a
n/a
n/a
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape
(2) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(3) n/a = not available
(4) Packaging code “O/I” or “T/R” and lower quantities can depend on product thickness
STORAGE AND HANDLING CONDITIONS
(1) Store the components at +5 °C to +40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt, or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight, and so on.
Revision: 08-Oct-14
Document Number: 45128
178
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
VJ Hi-Rel Series ..................... 180
CDR-MIL-PRF-55681 ............ 194
DSCC 03029 .......................... 205
DSCC 03028 .......................... 209
MLCCs
DSCC 05006 .......................... 214
for
DSCC 05002 .......................... 226
High Reliability and
Military / Aerospace
Applications
(NME Technology)
DSCC 05007 .......................... 218
DSCC 05001 .......................... 222
DSCC 05003 .......................... 230
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
for High Reliability Applications
FEATURES
• Manufactured with a combination of design,
materials and tight process control to
Available
achieve very high field reliability
• C0G (NP0) and X7R/X5R dieectrics offered
Available
• MIL-PRF-55681 qualified production line
• Reliability maintenance testing to verify
consistent quality
(X5R max. test temperature: +85 °C)
• Available with group A and C screening
• Group C data can be reported
• Available with only group A screening
• Available with only voltage conditioning
• Customized certification available on request to meet your
quality requirements
• Available with tin-lead barrier terminations order code “L”
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATIONS
• System critical medical applications
• Mission critical military and aerospace applications
ELECTRICAL SPECIFICATIONS
C0G (NP0)
X7R/X5R
GENERAL SPECIFICATION
GENERAL SPECIFICATION
Note
Electrical characteristics at +25 °C unless otherwise specified
Note
Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 1.0 pF to 39 nF
Voltage Range: 10 VDC to 600 VDC
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
Dissipation Factor (DF):
0.1 % maximum at 1.0 VRMS and
1 MHz for values  1000 pF
0.1 % maximum at 1.0 VRMS and
1 kHz for values > 1000 pF
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 0 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
 200 VDC-rated:
250 % of rated voltage
500 VDC-rated:
200 % of rated voltage
630 VDC-rated:
150 % of rated voltage
Operating Temperature: -55 °C to +125 °C
Capacitance Range: 100 pF to 6.8 μF
Voltage Range: 6.3 VDC to 500 VDC
Temperature Coefficient of Capacitance (TCC):
X5R: ± 15 % from -55 °C to +85 °C, with 0 VDC applied
X7R: ± 15 % from -55 °C to +125 °C, with 0 VDC applied
Dissipation Factor (DF):
 6.3 V, 10 V ratings: 5 % maximum at 1.0 VRMS and 1 kHz
16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz
 50 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz
Insulating Resistance:
at +25 °C 100 000 M min. or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
Aging Rate: 1 % maximum per decade
Dielectric Strength Test:
performed per method 103 of EIA 198-2-E.
Applied test voltages
 250 VDC-rated:
250 % of rated voltage
500 VDC-rated:
min. 150 % of rated voltage
630 VDC, 1000 VDC-rated:
150 % of rated voltage
1500 VDC, 3000 VDC-rated:
120 % of rated voltage
Revision: 17-Feb-15
Document Number: 45200
180
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
CASE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
0402
0603
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
3640
100
200
500
600
500
500
500
500
500
500
16
6.3
100
100
200
500
500
500
500
500
500
500
500
1.0 pF
1.0 pF
1.0 pF
1.0 pF
1.0 pF
22 pF
39 pF
100 pF
100 pF
120 pF
27 nF
120 nF
100 pF
270 pF
150 pF
680 pF
1.0 nF
1.0 nF
3.3 nF
10 nF
10 nF
10 nF
15 nF
180 pF
1.5 nF
3.3 nF
10 nF
10 nF
10 nF
22 nF
33 nF
33 nF
39 nF
47 nF
150 nF
22 nF
100 nF
390 nF
1.0 μF
1.0 μF
270 nF
1.0 μF
2.7 μF
2.2 μF
4.7 μF
6.8 μF
C0G (NP0)
X5R
X7R
ORDERING INFORMATION
VJ1206
CASE
CODE
0402
0603
0805
1206
1210
1808
1812
1825
2220
2225
3640
Y
104
J
DIELECTRIC CAPACITANCE CAPACITANCE
NOMINAL
TOLERANCE
A=
C0G (NP0)
G = X5R
Y = X7R
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Examples:
1R0 = 1.0 pF
103 =
10 000 pF
104 =
100 000 pF
C = ± 0.25 pF
D = ± 0.50 pF
F=±1%
G=±2%
H=±3%
J=±5%
K = ± 10 %
M = ± 20 %
Note:
C0G (NP0):
C, D < 10 pF
F, G, H, J ,K
 10 pF
X7R, X5R:
J, K, M
L
A
A
T
### (2)
TERMINATION
DC
VOLTAGE
RATING (1)
MARKING
PACKAGING
PROCESS
CODE
X = Ni barrier
100 % tin plated
L = Ni barrier with
tin lead plated
finish
min. 4 % lead
F = AgPd
N=
non-magnetic
Y = 6.3 V
Q = 10 V
A=
unmarked
C = 7" reel/paper
tape
T = 7" reel/plastic
tape
J = 7" reel
(low quantity)
P = 11 1/4"/13"
reel/paper tape
R = 11 1/4"/13"
reel/plastic tape
O = 7" reel/flamed
paper tape
I = 11 1/4"/13"reel/
flamed paper tape
Note:
“I” and “O” are
used for “F”, “N”
terminations, sizes
0402/0603/0805
2L, 2M,
2MP =
high rel
group A
and C
screening
J = 16 V
X = 25 V
A = 50 V
K = 75 V
B = 100 V
C = 200 V
P = 250 V
E = 500 V
N = 600 V
(3)(4)(5)
68 = high rel
group A
screening
only
5G = voltage
conditioning
only
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questons: [email protected]
(2) Process code has to be added
(3) Process code “2L” group “C” completion not required for shipment
(4) Process code “2M” group “C” completion required for shipment
(5) Process code “2MP” group “C” will be completed and data included with shipment
Revision: 17-Feb-15
Document Number: 45200
181
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
CASE CODE
STYLE
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
TERMINATION PAD
(P)
MINIMUM
MAXIMUM
0402
VJ0402
0.040 ± 0.004
(1.00 ± 0.10)
0.020 ± 0.004
(0.50 ± 0.10)
0.024 (0.61)
0.004 (0.10)
0.016 (0.41)
0603
VJ0603
0.063 ± 0.006
(1.60 ± 0.15)
0.031 ± 0.006
(0.80 ± 0.15)
0.036 (0.92)
0.012 (0.30)
0.018 (0.46)
0805
VJ0805
0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20)
0.057 (1.45)
0.010 (0.25)
0.028 (0.71)
1206
VJ1206
0.126 ± 0.010
(3.20 ± 0.25)
0.063 ± 0.010
(1.60 ± 0.25)
0.067 (1.70)
0.010 (0.25)
0.028 (0.71)
1210
VJ1210
0.126 ± 0.010
(3.20 ± 0.25)
0.098 ± 0.010
(2.50 ± 0.25)
0.067 (1.70)
0.010 (0.25)
0.028 (0.71)
1808
VJ1808
0.180 ± 0.012
(4.57 ± 0.30)
0.080 ± 0.010
(2.03 ± 0.25)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
1812
VJ1812
0.177 ± 0.012
(4.50 ± 0.30)
0.126 ± 0.008
(3.20 ± 0.20)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
1825
VJ1825
0.177 ± 0.012
(4.50 ± 0.30)
0.252 ± 0.010
(6.40 ± 0.25)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
2220
VJ2220
0.220 ± 0.010
(5.59 ± 0.25)
0.200 ± 0.010
(5.08 ± 0.25)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
2225
VJ2225
0.220 ± 0.010
(5.59 ± 0.25)
0.250 ± 0.010
(6.35 ± 0.25)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
3640
VJ3640
0.360 ± 0.015
(9.14 ± 0.38)
0.400 ± 0.015
(10.2 ± 0.38)
0.086 (2.18)
0.010 (0.25)
0.030 (0.76)
Note
• Termination code “F” has increased dimension tolerance:
0402: length + 0.006" (+ 0.15 mm)
0603: length + 0.008" (+ 0.20 mm)
0805/1206/1210: length + 0.011" (+ 0.28 mm)
Revision: 17-Feb-15
Document Number: 45200
182
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
STYLE
VJ0402
VJ0603
CASE CODE
0402
0603
10
16
25
50 100 10
16
25
50 100 200
VOLTAGE (VDC)
VOLTAGE CODE
Q
J
X
A
B
Q
J
X
A
B
C
CAP. CODE
CAP.
•
•
•
•
•
•
•
•
•
•
•
1R0
1.0 pF
•
•
•
•
•
•
•
•
•
•
•
1R2
1.2 pF
•
•
•
•
•
•
•
•
•
•
•
1R5
1.5 pF
•
•
•
•
•
•
•
•
•
•
•
1R8
1.8 pF
•
•
•
•
•
•
•
•
•
•
•
2R2
2.2 pF
•
•
•
•
•
•
•
•
•
•
•
2R7
2.7 pF
•
•
•
•
•
•
•
•
•
•
•
3R3
3.3 pF
•
•
•
•
•
•
•
•
•
•
•
3R9
3.9 pF
•
•
•
•
•
•
•
•
•
•
•
4R7
4.7 pF
•
•
•
•
•
•
•
•
•
•
•
5R6
5.6 pF
•
•
•
•
•
•
•
•
•
•
•
6R8
6.8 pF
•
•
•
•
•
•
•
•
•
•
•
8R2
8.2 pF
•
•
•
•
•
•
•
•
•
•
•
100
10 pF
•
•
•
•
•
•
•
•
•
•
•
120
12 pF
•
•
•
•
•
•
•
•
•
•
•
150
15 pF
•
•
•
•
•
•
•
•
•
•
•
180
18 pF
•
•
•
•
•
•
•
•
•
•
•
220
22 pF
•
•
•
•
•
•
•
•
•
•
•
270
27 pF
•
•
•
•
•
•
•
•
•
•
•
330
33 pF
•
•
•
•
•
•
•
•
•
•
•
390
39 pF
•
•
•
•
•
•
•
•
•
•
•
470
47 pF
•
•
•
•
•
•
•
•
•
•
•
560
56 pF
•
•
•
•
•
•
•
•
•
•
•
680
68 pF
•
•
•
•
•
•
•
•
•
•
•
820
82 pF
•
•
•
•
•
•
•
•
•
•
•
101
100 pF
•
•
•
•
•
•
•
•
•
•
•
121
120 pF
•
•
•
•
•
•
•
•
•
•
151
150 pF
•
•
•
•
•
•
•
•
•
•
181
180 pF
•
•
•
•
•
•
221
220 pF
•
•
•
•
•
•
271
270 pF
•
•
•
•
•
331
330 pF
•
•
•
•
•
391
390 pF
•
•
•
•
471
470 pF
•
•
•
•
561
560 pF
•
•
•
•
681
680 pF
•
•
•
821
820 pF
•
•
•
102
1.0 nF
•
•
122
1.2 nF
•
•
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
282
2.8 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
123
12 nF
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
Not RoHS-compliant
Revision: 17-Feb-15
10
Q
16
J
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ0805
0805
25
50 100
X
A
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
200
C
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45200
183
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
STYLE
VJ1206
CASE CODE
1206
VOLTAGE (VDC)
16
25
50
100
200
500
600
VOLTAGE CODE
J
X
A
B
C
E
N
CAP. CODE
CAP.
•
•
•
•
•
•
•
1R0
1.0 pF
1R2
1.2 pF
•
•
•
•
•
•
•
1R5
1.5 pF
•
•
•
•
•
•
•
1R8
1.8 pF
•
•
•
•
•
•
•
2R2
2.2 pF
•
•
•
•
•
•
•
2R7
2.7 pF
•
•
•
•
•
•
•
3R3
3.3 pF
•
•
•
•
•
•
•
3R9
3.9 pF
•
•
•
•
•
•
•
4R7
4.7 pF
•
•
•
•
•
•
•
5R6
5.6 pF
•
•
•
•
•
•
•
6R8
6.8 pF
•
•
•
•
•
•
•
8R2
8.2 pF
•
•
•
•
•
•
•
100
10 pF
•
•
•
•
•
•
•
120
12 pF
•
•
•
•
•
•
•
150
15 pF
•
•
•
•
•
•
•
180
18 pF
•
•
•
•
•
•
•
220
22 pF
•
•
•
•
•
•
•
270
27 pF
•
•
•
•
•
•
•
330
33 pF
•
•
•
•
•
•
•
390
39 pF
•
•
•
•
•
•
•
470
47 pF
•
•
•
•
•
•
•
560
56 pF
•
•
•
•
•
•
•
680
68 pF
•
•
•
•
•
•
•
820
82 pF
•
•
•
•
•
•
•
101
100 pF
•
•
•
•
•
•
•
121
120 pF
•
•
•
•
•
•
•
151
150 pF
•
•
•
•
•
•
•
181
180 pF
•
•
•
•
•
•
•
221
220 pF
•
•
•
•
•
•
•
271
270 pF
•
•
•
•
•
•
•
331
330 pF
•
•
•
•
•
•
•
391
390 pF
•
•
•
•
•
•
•
471
470 pF
•
•
•
•
•
•
•
561
560 pF
•
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
282
2.8 nF
•
•
•
•
332
3.3 nF
•
•
•
•
392
3.9 nF
•
•
•
•
472
4.7 nF
•
•
•
•
562
5.6 nF
•
•
•
682
6.8 nF
•
•
•
822
8.2 nF
•
103
10 nF
•
123
12 nF
Notes
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
Not RoHS-compliant
Revision: 17-Feb-15
25
X
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210 (1)
1210 (1)
100
200
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45200
184
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
STYLE
VJ1808 (1)
VJ1812 (1)
(1)
CASE CODE
1808
1812 (1)
VOLTAGE (VDC)
25
50
100
200
500
25
50
100
200
VOLTAGE CODE
X
A
B
C
E
X
A
B
C
CAP. CODE
CAP.
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
•
•
•
•
•
270
27 pF
•
•
•
•
•
330
33 pF
•
•
•
•
•
390
39 pF
•
•
•
•
•
•
•
470
47 pF
•
•
•
•
•
•
•
•
•
560
56 pF
•
•
•
•
•
•
•
•
•
680
68 pF
•
•
•
•
•
•
•
•
•
820
82 pF
•
•
•
•
•
•
•
•
•
101
100 pF
•
•
•
•
•
•
•
•
•
121
120 pF
•
•
•
•
•
•
•
•
•
151
150 pF
•
•
•
•
•
•
•
•
•
181
180 pF
•
•
•
•
•
•
•
•
•
221
220 pF
•
•
•
•
•
•
•
•
•
271
270 pF
•
•
•
•
•
•
•
•
•
331
330 pF
•
•
•
•
•
•
•
•
•
391
390 pF
•
•
•
•
•
•
•
•
•
471
470 pF
•
•
•
•
•
•
•
•
•
561
560 pF
•
•
•
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
•
•
•
822
8.2 nF
•
•
•
•
•
•
•
103
10 nF
•
•
•
•
•
•
123
12 nF
•
•
•
•
153
15 nF
•
•
•
183
18 nF
•
•
223
22 nF
•
•
273
27 nF
333
33 nF
393
39 nF
473
47 nF
563
56 nF
683
68 nF
Notes
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
Not RoHS-compliant
Revision: 17-Feb-15
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
25
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1825 (1)
1825 (1)
50
100
200
A
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45200
185
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
C0G (NP0)
STYLE
VJ2220 (1)
CASE CODE
2220 (1)
VOLTAGE (VDC)
25
50
100
200
500
25
VOLTAGE CODE
X
A
B
C
E
X
CAP. CODE
CAP.
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
•
•
•
•
•
121
120 pF
•
•
•
•
•
•
151
150 pF
•
•
•
•
•
•
181
180 pF
•
•
•
•
•
•
221
220 pF
•
•
•
•
•
•
271
270 pF
•
•
•
•
•
•
331
330 pF
•
•
•
•
•
•
391
390 pF
•
•
•
•
•
•
471
470 pF
•
•
•
•
•
•
561
560 pF
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
822
8.2 nF
•
•
•
•
•
103
10 nF
•
•
•
•
•
123
12 nF
•
•
•
•
•
153
15 nF
•
•
•
•
•
183
18 nF
•
•
•
•
223
22 nF
•
•
•
•
273
27 nF
•
•
•
•
333
33 nF
•
•
•
•
393
39 nF
•
473
47 nF
563
56 nF
683
68 nF
Notes
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
Not RoHS-compliant
Revision: 17-Feb-15
50
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ2225 (1)
2225 (1)
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
200
C
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45200
186
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R/X5R (1)
STYLE
VJ0402
VJ0603
CASE CODE
0402
0603
6.3
10
16
25
50 100 6.3
10
16
25
50
VOLTAGE (VDC)
VOLTAGE CODE
Y
Q
J
X
A
B
Y
Q
J
X
A
CAP. CODE
CAP.
•
•
•
•
•
•
101
100 pF
•
•
•
•
•
•
121
120 pF
•
•
•
•
•
•
151
150 pF
•
•
•
•
•
•
181
180 pF
•
•
•
•
•
•
221
220 pF
•
•
•
•
•
•
•
•
•
•
•
271
270 pF
•
•
•
•
•
•
•
•
•
•
•
331
330 pF
•
•
•
•
•
•
•
•
•
•
•
391
390 pF
•
•
•
•
•
•
•
•
•
•
•
471
470 pF
•
•
•
•
•
•
•
•
•
•
•
561
560 pF
•
•
•
•
•
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
•
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
•
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
•
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
•
•
•
•
•
822
8.2 nF
•
•
•
•
•
•
•
•
•
•
103
10 nF
•
•
•
•
•
•
•
•
•
123
12 nF
•
•
•
•
•
•
•
•
•
153
15 nF
•
•
•
•
•
•
•
•
183
18 nF
•
•
•
•
•
•
•
•
223
22 nF
X5R X5R X5R
•
•
•
•
•
273
27 nF
X5R X5R X5R
•
•
•
•
•
333
33 nF
X5R
•
•
•
•
•
393
39 nF
X5R
•
•
•
•
•
473
47 nF
•
•
•
•
563
56 nF
•
•
•
•
683
68 nF
•
•
•
•
823
82 nF
•
•
•
•
104
100 nF
X5R
124
120 nF
X5R
154
150 nF
184
180 nF
224
220 nF
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
125
1.2 μF
Notes
(1) See “Selection Chart” for values only available as X5R. All other values X7R.
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
Not RoHS-compliant
Revision: 17-Feb-15
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
10
Q
16
J
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ0805
0805
25
50
X
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100
B
200
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45200
187
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
STYLE
VJ1206
CASE CODE
1206
16
25
50
100
200
500
16
VOLTAGE (VDC)
VOLTAGE CODE
J
X
A
B
C
E
J
CAP. CODE
CAP.
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
•
•
822
8.2 nF
•
•
•
•
•
•
•
103
10 nF
•
•
•
•
•
•
•
123
12 nF
•
•
•
•
•
•
•
153
15 nF
•
•
•
•
•
•
•
183
18 nF
•
•
•
•
•
•
223
22 nF
•
•
•
•
•
•
273
27 nF
•
•
•
•
•
•
333
33 nF
•
•
•
•
•
•
393
39 nF
•
•
•
•
•
•
473
47 nF
•
•
•
•
•
•
563
56 nF
•
•
•
•
•
•
683
68 nF
•
•
•
•
•
•
823
82 nF
•
•
•
•
•
•
104
100 nF
•
•
•
•
•
124
120 nF
•
•
•
•
•
154
150 nF
•
•
•
•
•
184
180 nF
•
•
•
•
•
224
220 nF
•
•
•
•
•
274
270 nF
•
•
•
•
334
330 nF
•
•
•
394
390 nF
•
•
•
474
470 nF
•
•
•
564
560 nF
•
•
•
684
680 nF
•
•
•
824
820 nF
•
•
•
105
1.0 μF
125
1.2 μF
Notes
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
Not RoHS-compliant
Revision: 17-Feb-15
25
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1210 (1)
1210
50
100
A
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
200
C
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45200
188
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
X7R
VJ1812 (1)
STYLE
VJ1808 (1)
CASE CODE
1808 (1)
1812 (1)
VOLTAGE (VDC)
25
50 100 200 500 25
50
75
100 200 250
VOLTAGE CODE
X
A
B
C
E
X
A
K
B
C
P
CAP. CODE
CAP.
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
222
1.2 nF
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
•
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
•
•
•
•
•
•
822
8.2 nF
•
•
•
•
•
•
•
•
•
•
•
103
10 nF
•
•
•
•
•
•
•
•
•
•
•
123
12 nF
•
•
•
•
•
•
•
•
•
•
•
153
15 nF
•
•
•
•
•
•
•
•
•
•
•
183
18 nF
•
•
•
•
•
•
•
•
•
•
•
223
22 nF
•
•
•
•
•
•
•
•
•
•
•
273
27 nF
•
•
•
•
•
•
•
•
•
•
333
33 nF
•
•
•
•
•
•
•
•
•
•
393
39 nF
•
•
•
•
•
•
•
•
•
•
473
47 nF
•
•
•
•
•
•
•
•
•
•
563
56 nF
•
•
•
•
•
•
•
•
•
•
683
68 nF
•
•
•
•
•
•
•
•
•
•
823
82 nF
•
•
•
•
•
•
•
•
•
•
104
100 nF
•
•
•
•
•
•
•
•
•
124
120 nF
•
•
•
•
•
•
•
•
•
154
150 nF
•
•
•
•
•
•
•
•
•
184
180 nF
•
•
•
•
•
•
•
•
224
220 nF
•
•
•
•
•
•
•
•
274
270 nF
•
•
•
•
•
•
334
330 nF
•
•
•
•
•
394
390 nF
•
•
•
•
•
474
470 nF
•
•
•
•
564
560 nF
•
•
•
•
684
680 nF
•
•
•
•
824
820 nF
•
•
105
1.0 μF
125
1.2 μF
155
1.5 μF
185
1.8 μF
225
2.2 μF
275
2.7 μF
335
3.3 μF
395
3.9 μF
475
4.7 μF
565
5.6 μF
685
6.8 μF
825
8.2 μF
Notes
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
Not RoHS-compliant
Revision: 17-Feb-15
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
25
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ1825 (1)
1825 (1)
50
100 200
A
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Document Number: 45200
189
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
102
222
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
335
395
475
25
X
CAP.
1.0 nF
1.2 nF
1.5 nF
1.8 nF
2.2 nF
2.7 nF
3.3 nF
3.9 nF
4.7 nF
5.6 nF
6.8 nF
8.2 nF
10 nF
12 nF
15 nF
18 nF
22 nF
27 nF
33 nF
39 nF
47 nF
56 nF
68 nF
82 nF
100 nF
120 nF
150 nF
180 nF
220 nF
270 nF
330 nF
390 nF
470 nF
560 nF
680 nF
820 nF
1.0 μF
1.2 μF
1.5 μF
1.8 μF
2.2 μF
2.7 μF
3.3 μF
3.9 μF
4.7 μF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
VJ2220 (1)
2220 (1)
50
100
200
A
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
25
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
X7R
VJ2225 (1)
2225 (1)
50
100
200
A
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
25
X
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
565
5.6 μF
•
685
6.8 μF
•
825
8.2 μF
VJ3640 (1)
3640 (1)
50
100
200
A
B
C
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
500
E
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Notes
(1) See soldering recommendations within this data book, or visit: www.vishay.com/doc?45034
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “L”
Not RoHS-compliant
Revision: 17-Feb-15
Document Number: 45200
190
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
HI-REL C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS
MINIMUM INSULATION RESISTANCE VS. TEMPERATURE
10 000
TEMPERATURE COEFFICIENT OF CAPACITANCE
1.5
INSULATION RESISTANCE
(ΩF)
% CAPACITANCE CHANGE
2.0
1.0
1000
0.5
0.0
- 0.5
NP0
- 1.0
- 1.5
100
10
- 2.0
0
- 75 - 50 - 25
25
50
75 100 125
TEMPERATURE °C
AGING RATE
VOLTAGE COEFICIENT OF CAPACITANCE
30
% CAPACITANCE CHANGE
% CAPACITANCE CHANGE
100 125
TEMPERATURE °C
0.2
0.1
0.0
- 0.1
20
10
0
- 10
- 20
- 30
- 0.2
1
10
100
1000
10 000
0
500
600 700 800 900 1000
DISSIPATION FACTOR
0.001
1
0
0.0005
-1
-2
Revision: 17-Feb-15
200 300 400
DISSIPATION FACTOR VS. FREQUENCY
CHANGE OF CAPACITANCE WITH FREQUENCY
2
1 kHz
100
DC VOLTS APPLIED
HOURS
% CAPACITANCE CHANGE
25
10
10 kHz
100 kHz
FREQUENCY
1 MHz
0.00025
1 kHz
10 kHz
100 kHz
FREQUENCY
1 MHz
Document Number: 45200
191
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
HI-REL X7R/X5R DIELECTRIC - TYPICAL PARAMETERS
TEMPERATURE COEFFICIENT OF CAPACITANCE
15
10
5
X5R
0
-5
X7R
- 10
- 15
- 20
- 75
MIN. INSULATION RESISTANCE VS. TEMPERATURE
INSULATION RESISTANCE (ΩF)
% CAPACITANCE CHANGE
20
10 000
1000
100
10
- 50
- 25
0
25
50
75
100
10
125
25
DISSIPATION FACTOR VS. TEMPERATURE
AGING RATE
% DISSIPATION FACTOR
% CAPACITANCE CHANGE
1.0
0.0
- 1.0
- 2.0
- 3.0
- 4.0
1
10
100
1000
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
X5R
X7R
- 75 - 50
10 000
- 25
HOURS
0
25
50
75
100 125
TEMPERATURE (°C)
DISSIPATION FACTOR VS. VOLTAGE
DISSIPATION FACTOR VS. VOLTAGE
0.020
DISSIPATION FACTOR
0.020
DISSIPATION FACTOR
100 125
TEMPERATURE (°C)
TEMPERATURE (°C)
0.016
0.012
50 V
0.008
100 V
0.016
0.012
0.008
200 V
500 V
0.004
0.004
0
10
20
30
40
50
60
DC VOLTS APPLIED
Revision: 17-Feb-15
70
80
90 100
UN/V-
0
100
200
300
400
DC VOLTS APPLIED
500
600
700
UN/V-
Document Number: 45200
192
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Hi-Rel Series
www.vishay.com
Vishay Vitramon
STANDARD PACKAGING QUANTITIES
(1)(2)(3)
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
CASE
CODE
TAPE
SIZE
PAPER TAPE
PACKAGING CODE
“C”/“O”
PLASTIC TAPE
PACKAGING CODE
“T”
LOW QUANTITY
PACKAGING CODE
“J”
PAPER TAPE
PACKAGING CODE
“P”/“I”
PLASTIC TAPE
PACKAGING CODE
“R”
0402
8 mm
5000
n/a
1000
10 000
n/a
(4)
8 mm
4000
4000
1000
10 000
10 000
0805 (4)
8 mm
3000
3000
1000
10 000
10 000
1206 (4)
8 mm
3000
3000/2500
1000
10 000
10 000/9000
0603
1210 (4)
8 mm
n/a
3000/2500/2000
1000
n/a
10 000/9000
1808
12 mm
n/a
2000
500
n/a
10 000
1812
12 mm
n/a
1000
500
n/a
4000
1825
12 mm
n/a
1000
500
n/a
4000
2220
12 mm
n/a
1000
500
n/a
4000
2225
12 mm
n/a
1000
500
n/a
4000
3640
16 mm
n/a
500
n/a
n/a
n/a
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape
(2) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(3) n/a = not available
(4) Packaging “C”/”P”/”O”/”I” and “T”/”R” or lower quantities can depend from product thickness
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to +40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 17-Feb-15
Document Number: 45200
193
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CDR-MIL-PRF-55681
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
MIL Qualified, Type CDR
FEATURES
• Military qualified products
• Federal stock control number,
CAGE CODE SHV71
Available
Available
• High reliability tested per MIL-PRF-55681
• Tin/lead termination codes “Z” and “U”
• Lead (Pb)-free termination codes “W”, “Y”, “M”
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATIONS
• Avionic systems
• Sonar systems
• Satellite systems
• Missiles applications
• Geographical information systems
• Global positioning systems
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at + 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 1.0 pF to 470 nF
Aging Rate:
Voltage Range: 50 VDC to 100 VDC
BP: 0 % maximum per decade
BX: 1 % maximum per decade
Temperature Coefficient of Capacitance (TCC):
Insulation Resistance (IR):
BP: 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C,
with 0 VDC applied
At + 25 °C and rated voltage 100 000 M minimum or
1000 F, whichever is less
BX: ± 15 % from - 55 °C to + 125 °C,
with 0 VDC applied
Dielectric Strength Test:
BX: + 15 %, - 25 % from - 55 °C to + 125 °C,
with 100 % rated VDC applied
Performed per method 103 of EIA-198-2-E.
Applied test voltages:
 100 VDC-rated: 250 % of rated voltage
Dissipation Factor (DF):
BP: 0.15 % maximum
BX: 2.50 % maximum
Test frequency:
1 MHz ± 50 kHz for BP capacitors  1000 pF
and for BX capacitors  100 pF
All other BP and BX at 1 kHz ± 50 Hz
Revision: 28-Mar-13
Document Number: 45026
194
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CDR-MIL-PRF-55681
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
MAXIMUM VOLTAGE
(V)
STYLE (CASE)
MINIMUM
MAXIMUM
180 pF
BP
CDR01 (0805)
100
10 pF
BX
CDR01 (0805)
100
120 pF
4.7 nF
BP
CDR02 (1805)
100
220 pF
270 pF
BX
CDR02 (1805)
100
3.9 nF
22 nF
BP
CDR03 (1808)
100
330 pF
1.0 nF
BX
CDR03 (1808)
100
12 nF
68 nF
BP
CDR04 (1812)
100
1.2 nF
3.3 nF
BX
CDR04 (1812)
100
39 nF
180 nF
BX
CDR06 (2225)
50
390 nF
470 nF
BP
CDR31 (0805)
100
1.0 pF
680 pF
BX
CDR31 (0805)
100
470 pF
18 nF
BP
CDR32 (1206)
100
1.0 pF
2.2 nF
BX
CDR32 (1206)
100
4.7 nF
39 nF
BP
CDR33 (1210)
100
1.0 nF
3.3 nF
BX
CDR33 (1210)
100
15 nF
100 nF
BP
CDR34 (1812)
100
2.2 nF
10 nF
BX
CDR34 (1812)
100
27 nF
180 nF
BP
CDR35 (1825)
100
4.7 nF
22 nF
BX
CDR35 (1825)
Note
• Detail ratings see selection chart
100
56 nF
470 nF
ORDERING INFORMATION - MILITARY
CDR31
BX
MILITARY
STYLE
DIELECTRIC
CDR01
CDR02
CDR03
CDR04
CDR06
CDR31
CDR32
CDR33
CDR34
CDR35
BP and BX
102
A
CAPACITANCE
DC
NOMINAL
VOLTAGE
CODE
RATING (1)
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier.
Examples:
102 = 1000 pF
1R8 = 1.8 pF
A = 50 V
B = 100 V
K
Y
S
A
T
CAPACITANCE
TOLERANCE (2)
TERMINATION
FAILURE
RATE
MARKING
PACKAGING
C = ± 0.25 pF
D = ± 0.5 pF
F=±1%
J=±5%
K = ± 10 %
M = ± 20 %
M = Silver Palladium M = 1.0 %
Y = Ni barrier with
P = 0.1 %
100 % tin
R = 0.01 %
W = Ni barrier with S = 0.001 %
100 % tin
Consult
Z = Ni barrier with
factory for
tin/lead plate
failure rate
min. 4 % lead
status
U = Hot solder
dipped
(min. of 4 % lead) (3)
A=
Unmarked
T = 7" reel/plastic tape
J = 7" reel (low quantity)
C = 7" reel/paper tape
R = 11 1/4"/13"
reel/plastic tape
P = 11 1/4"/13"
reel/paper tape
B = Bulk
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
(2) Available tolerances please see rating chart
(3) MIL-PRF-55681 “U” termination part number have increased dimensions
Revision: 28-Mar-13
Document Number: 45026
195
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CDR-MIL-PRF-55681
www.vishay.com
Vishay Vitramon
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
TERM. (P)
STYLE
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS (T)
MINIMUM
MAXIMUM
CDR01
0.080 ± 0.015 (2.03 ± 0.38)
0.050 ± 0.015 (1.27 ± 0.38)
0.055 (1.40)
0.010 (0.25)
0.030 (0.75)
CDR02
0.180 ± 0.015 (4.57 ± 0.38)
0.050 ± 0.015 (1.27 ± 0.38)
0.055 (1.40)
0.010 (0.25)
0.030 (0.75)
CDR03
0.180 ± 0.015 (4.57 ± 0.38)
0.080 ± 0.015 (2.03 ± 0.38)
0.080 (2.03)
0.010 (0.25)
0.030 (0.75)
CDR04
0.180 ± 0.015 (4.57 ± 0.38)
0.125 ± 0.015 (3.20 ± 0.38)
0.080 (2.03)
0.010 (0.25)
0.030 (0.75)
/3
CDR06
0.225 ± 0.020 (5.72 ± 0.51)
0.250 ± 0.020 (6.35 ± 0.51)
0.080 (2.03)
0.010 (0.25)
0.030 (0.75)
/7
CDR31
0.078 ± 0.008 (2.00 ± 0.20)
0.049 ± 0.008 (1.25 ± 0.20)
0.051 (1.30)
0.012 (0.30)
0.028 (0.70)
/8
CDR32
0.125 ± 0.008 (3.20 ± 0.20)
0.062 ± 0.008 (1.60 ± 0.20)
0.051 (1.30)
0.012 (0.30)
0.028 (0.70)
/9
CDR33
0.125 ± 0.010 (3.20 ± 0.25)
0.098 ± 0.010 (2.50 ± 0.25)
0.059 (1.50)
0.010 (0.25)
0.030 (0.75)
/10
CDR34
0.176 ± 0.010 (4.50 ± 0.25)
0.125 ± 0.010 (3.20 ± 0.25)
0.059 (1.50)
0.010 (0.25)
0.030 (0.75)
/11
CDR35
0.176 ± 0.012 (4.50 ± 0.30)
0.250 ± 0.012 (6.40 ± 0.30)
0.059 (1.50)
0.008 (0.20)
0.032 (0.80)
MIL-PRF-55681
/1
“U” TERMINATION in inches (millimeters)
STYLE
LENGTH
WIDTH/THICKNESS
PACKAGING CODES
CDR01
0.020 (0.51)
0.015 (0.38)
“C”, “J”, “P”, “B”
CDR02 to CDR06
0.025 (0.64)
0.015 (0.38)
“T”, “J”, “R”, “B”
CDR31
0.023 (0.60)
0.012 (0.30)
“C”, “J”, “P”, “B”
CDR32 to CDR35
0.023 (0.60)
0.012 (0.30)
“T”, “J”, “R”, “B”
MIL-C-55681 QUALIFIED, TYPE CDR
MILITARY TYPE
DESIGNATION
CDR01BP
CDR01BP100B_ _ _
CDR01BP120BJ_ _
CDR01BP150B_ _ _
CDR01BP180BJ_ _
CDR01BP220B_ _ _
CDR01BP270BJ_ _
CDR01BP330B_ _ _
CDR01BP390BJ_ _
CDR01BP470B_ _ _
CDR01BP560BJ_ _
CDR01BP680B_ _ _
CDR01BP820BJ_ _
CDR01BP101B_ _ _
CDR01BP121B_ _ _
CAPACITANCE
CODE
CAPACITANCE
(pF)
CAPACITANCE
TOLERANCE
RATED TEMP. AND
VOLTAGE TEMP. LIMITS
VOLTAGE
(DC)
100
120
150
180
220
270
330
390
470
560
680
820
101
121
10
12
15
18
22
27
33
39
47
56
68
82
100
120
J, K
J
J, K
J
J, K
J
J, K
J
J, K
J
J, K
J
J, K
J, K
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
100
100
100
100
100
100
100
100
100
100
100
100
100
100
CDR01BP151B_ _ _
151
150
J, K
BP
100
CDR01BP181B_ _ _
181
180
J, K
BP
100
RoHS
STATUS
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
Revision: 28-Mar-13
Document Number: 45026
196
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CDR-MIL-PRF-55681
www.vishay.com
Vishay Vitramon
MIL-C-55681 QUALIFIED, TYPE CDR
MILITARY TYPE
CAPACITANCE CAPACITANCE CAPACITANCE
RATED TEMP. AND
DESIGNATION
CODE
(pF)
TOLERANCE
VOLTAGE TEMP. LIMITS
CDR01BX
CDR01BX121B_ _ _
121
120
J, K
BX
CDR01BX151B_ _ _
151
150
J, K
BX
CDR01BX181B_ _ _
181
180
J, K
BX
CDR01BX221B_ _ _
221
220
K, M
BX
CDR01BX271BK_ _
271
270
K
BX
CDR01BX331B_ _ _
331
330
K, M
BX
CDR01BX391BK_ _
391
390
K
BX
CDR01BX471B_ _ _
471
470
K, M
BX
CDR01BX561BK_ _
561
560
K
BX
CDR01BX681B_ _ _
681
680
K, M
BX
CDR01BX821BK_ _
821
820
K
BX
CDR01BX102B_ _ _
102
1000
K, M
BX
CDR01BX122BK_ _
122
1200
K
BX
CDR01BX152B_ _ _
152
1500
K, M
BX
CDR01BX182BK_ _
182
1800
K
BX
CDR01BX222B_ _ _
222
2200
K, M
BX
CDR01BX272BK_ _
272
2700
K
BX
CDR01BX332B_ _ _
332
3300
K, M
BX
CDR01BX392AK_ _
392
3900
K
BX
CDR01BX472A_ _ _
472
4700
K, M
BX
CDR02BP
CDR02BP221B_ _ _
221
220
J, K
BP
CDR02BP271BJ_ _
271
270
J
BP
CDR02BX
CDR02BX392BK_ _
392
3900
K
BX
CDR02BX472B_ _ _
472
4700
K, M
BX
CDR02BX562BK_ _
562
5600
K
BX
CDR02BX682B_ _ _
682
6800
K, M
BX
CDR02BX822BK_ _
822
8200
K
BX
CDR02BX103B_ _ _
103
10 000
K, M
BX
CDR02BX123AK_ _
123
12 000
K
BX
CDR02BX153A_ _ _
153
15 000
K, M
BX
CDR02BX183AK_ _
183
18 000
K
BX
CDR02BX223A_ _ _
223
22 000
K, M
BX
CDR03BP
CDR03BP331B_ _ _
331
330
J, K
BP
CDR03BP391BJ_ _
391
390
J
BP
CDR03BP471B_ _ _
471
470
J, K
BP
CDR03BP561BJ_ _
561
560
J
BP
CDR03BP681B_ _ _
681
680
J, K
BP
CDR03BP821BJ_ _
821
820
J
BP
CDR03BP102B_ _ _
102
1000
J, K
BP
CDR03BX
CDR03BX123BK_ _
123
12 000
K
BX
CDR03BX153B_ _ _
153
15 000
K, M
BX
CDR03BX183BK_ _
183
18 000
K
BX
CDR03BX223B_ _ _
223
22 000
K, M
BX
CDR03BX273BK_ _
273
27 000
K
BX
CDR03BX333B_ _ _
333
33 000
K, M
BX
CDR03BX393AK_ _
393
39 000
K
BX
CDR03BX473A_ _ _
473
47 000
K, M
BX
CDR03BX563AK_ _
563
56 000
K
BX
CDR03BX683A_ _ _
683
68 000
K, M
BX
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
Revision: 28-Mar-13
VOLTAGE
(DC)
RoHS
STATUS
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
100
100
100
100
100
100
100
100
50
50
50
50
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
Document Number: 45026
197
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CDR-MIL-PRF-55681
www.vishay.com
Vishay Vitramon
MIL-C-55681 QUALIFIED, TYPE CDR
MILITARY TYPE
DESIGNATION
CAPACITANCE
CODE
CAPACITANCE
(pF)
CAPACITANCE
TOLERANCE
RATED TEMP. AND
VOLTAGE TEMP. LIMITS
VOLTAGE
(DC)
CDR04BP122BJ_ _
122
CDR04BP152B_ _ _
152
1200
J
BP
100
1500
J, K
BP
CDR04BP182BJ_ _
182
100
1800
J
BP
100
CDR04BP222B_ _ _
CDR04BP272BJ_ _
222
2200
J, K
BP
100
272
2700
J
BP
100
CDR04BP332B_ _ _
332
3300
J, K
BP
100
CDR04BX393BK_ _
393
39 000
K
BX
100
CDR04BX473B_ _ _
473
47 000
K, M
BX
100
CDR04BX563BK_ _
563
56 000
K
BX
100
CDR04BX823AK_ _
823
82 000
K
BX
50
CDR04BX104A_ _ _
104
100 000
K, M
BX
50
RoHS
STATUS
CDR04BP
CDR04BX
CDR04BX124AK_ _
124
120 000
K
BX
50
CDR04BX154A_ _ _
154
150 000
K, M
BX
50
CDR04BX184AK_ _
184
180 000
K
BX
50
CDR06BX
CDR06BX394AK_ _
394
390 000
K
BX
50
CDR06BX474A_ _ _
474
470 000
K, M
BX
50
CDR31BP
CDR31BP1R0B_ _ _
1R0
1
C
BP
100
CDR31BP1R1B_ _ _
1R1
1.1
C
BP
100
CDR31BP1R2B_ _ _
1R2
1.2
C
BP
100
CDR31BP1R3B_ _ _
1R3
1.3
C
BP
100
CDR31BP1R5B_ _ _
1R5
1.5
C
BP
100
CDR31BP1R6B_ _ _
1R6
1.6
C
BP
100
CDR31BP1R8B_ _ _
1R8
1.8
C
BP
100
CDR31BP2R0B_ _ _
2R0
2
C
BP
100
CDR31BP2R2B_ _ _
2R2
2.2
C
BP
100
CDR31BP2R4B_ _ _
2R4
2.4
C
BP
100
CDR31BP2R7B_ _ _
2R7
2.7
C, D
BP
100
CDR31BP3R0B_ _ _
3R0
3
C, D
BP
100
CDR31BP3R3B_ _ _
3R3
3.3
C, D
BP
100
CDR31BP3R6B_ _ _
3R6
3.6
C, D
BP
100
CDR31BP3R9B_ _ _
3R9
3.9
C, D
BP
100
CDR31BP4R3B_ _ _
4R3
4.3
C, D
BP
100
CDR31BP4R7B_ _ _
4R7
4.7
C, D
BP
100
CDR31BP5R1B_ _ _
5R1
5.1
C, D
BP
100
CDR31BP5R6B_ _ _
5R6
5.6
C, D
BP
100
CDR31BP6R2B_ _ _
6R2
6.2
C, D
BP
100
CDR31BP6R8B_ _ _
6R8
6.8
C, D
BP
100
CDR31BP7R5B_ _ _
7R5
7.5
C, D
BP
100
CDR31BP8R2B_ _ _
8R2
8.2
C, D
BP
100
CDR31BP9R1B_ _ _
9R1
9.1
C, D
BP
100
CDR31BP100B_ _ _
100
10
F, J, K
BP
100
CDR31BP110B_ _ _
110
11
F, J, K
BP
100
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
Revision: 28-Mar-13
Document Number: 45026
198
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CDR-MIL-PRF-55681
www.vishay.com
Vishay Vitramon
MIL-C-55681 QUALIFIED, TYPE CDR
MILITARY TYPE
DESIGNATION
CAPACITANCE
CODE
CAPACITANCE
(pF)
CAPACITANCE
TOLERANCE
RATED TEMP. AND
VOLTAGE TEMP. LIMITS
VOLTAGE
(DC)
CDR31BP120B_ _ _
120
12
F, J, K
BP
100
CDR31BP130B_ _ _
130
13
F, J, K
BP
100
CDR31BP150B_ _ _
150
15
F, J, K
BP
100
CDR31BP160B_ _ _
160
16
F, J, K
BP
100
CDR31BP180B_ _ _
180
18
F, J, K
BP
100
CDR31BP200B_ _ _
200
20
F, J, K
BP
100
CDR31BP220B_ _ _
220
22
F, J, K
BP
100
CDR31BP240B_ _ _
240
24
F, J, K
BP
100
CDR31BP270B_ _ _
270
27
F, J, K
BP
100
CDR31BP300B_ _ _
300
30
F, J, K
BP
100
CDR31BP330B_ _ _
330
33
F, J, K
BP
100
CDR31BP360B_ _ _
360
36
F, J, K
BP
100
CDR31BP390B_ _ _
390
39
F, J, K
BP
100
CDR31BP430B_ _ _
430
43
F, J, K
BP
100
CDR31BP470B_ _ _
470
47
F, J, K
BP
100
CDR31BP510B_ _ _
510
51
F, J, K
BP
100
CDR31BP560B_ _ _
560
56
F, J, K
BP
100
CDR31BP620B_ _ _
620
62
F, J, K
BP
100
CDR31BP680B_ _ _
680
68
F, J, K
BP
100
CDR31BP750B_ _ _
750
75
F, J, K
BP
100
CDR31BP820B_ _ _
820
82
F, J, K
BP
100
RoHS
STATUS
CDR31BP
CDR31BP910B_ _ _
910
91
F, J, K
BP
100
CDR31BP101B_ _ _
101
100
F, J, K
BP
100
CDR31BP111B_ _ _
111
110
F, J, K
BP
100
CDR31BP121B_ _ _
121
120
F, J, K
BP
100
CDR31BP131B_ _ _
131
130
F, J, K
BP
100
CDR31BP151B_ _ _
151
150
F, J, K
BP
100
CDR31BP161B_ _ _
161
160
F, J, K
BP
100
CDR31BP181B_ _ _
181
180
F, J, K
BP
100
CDR31BP201B_ _ _
201
200
F, J, K
BP
100
CDR31BP221B_ _ _
221
220
F, J, K
BP
100
CDR31BP241B_ _ _
241
240
F, J, K
BP
100
CDR31BP271B_ _ _
271
270
F, J, K
BP
100
CDR31BP301B_ _ _
301
300
F, J, K
BP
100
CDR31BP331B_ _ _
331
330
F, J, K
BP
100
CDR31BP361B_ _ _
361
360
F, J, K
BP
100
CDR31BP391B_ _ _
391
390
F, J, K
BP
100
CDR31BP431B_ _ _
431
430
F, J, K
BP
100
CDR31BP471B_ _ _
471
470
F, J, K
BP
100
CDR31BP511A_ _ _
511
510
F, J, K
BP
50
CDR31BP561A_ _ _
561
560
F, J, K
BP
50
CDR31BP621A_ _ _
621
620
F, J, K
BP
50
CDR31BP681A_ _ _
681
680
F, J, K
BP
50
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
Revision: 28-Mar-13
Document Number: 45026
199
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CDR-MIL-PRF-55681
www.vishay.com
Vishay Vitramon
MIL-C-55681 QUALIFIED, TYPE CDR
MILITARY TYPE
DESIGNATION
CAPACITANCE
CODE
CAPACITANCE
(pF)
CAPACITANCE
TOLERANCE
RATED TEMP. AND
VOLTAGE TEMP. LIMITS
VOLTAGE
(DC)
CDR31BX471B_ _ _
471
470
K, M
BX
100
CDR31BX561B_ _ _
561
560
K, M
BX
100
CDR31BX681B_ _ _
681
680
K, M
BX
100
CDR31BX821B_ _ _
821
820
K, M
BX
100
CDR31BX102B_ _ _
102
1000
K, M
BX
100
CDR31BX122B_ _ _
122
1200
K, M
BX
100
CDR31BX152B_ _ _
152
1500
K, M
BX
100
CDR31BX182B_ _ _
182
1800
K, M
BX
100
CDR31BX222B_ _ _
222
2200
K, M
BX
100
CDR31BX272B_ _ _
272
2700
K, M
BX
100
CDR31BX332B_ _ _
332
3300
K, M
BX
100
CDR31BX392B_ _ _
392
3900
K, M
BX
100
CDR31BX472B_ _ _
472
4700
K, M
BX
100
CDR31BX562A_ _ _
562
5600
K, M
BX
50
CDR31BX682A_ _ _
682
6800
K, M
BX
50
CDR31BX822A_ _ _
822
8200
K, M
BX
50
CDR31BX103A_ _ _
103
10 000
K, M
BX
50
CDR31BX123A_ _ _
123
12 000
K, M
BX
50
CDR31BX153A_ _ _
153
15 000
K, M
BX
50
CDR31BX183A_ _ _
183
18 000
K, M
BX
50
RoHS
STATUS
CDR31BX
CDR32BP
CDR32BP1R0B_ _ _
1R0
1
C
BP
100
CDR32BP1R1B_ _ _
1R1
1.1
C
BP
100
CDR32BP1R2B_ _ _
1R2
1.2
C
BP
100
CDR32BP1R3B_ _ _
1R3
1.3
C
BP
100
CDR32BP1R5B_ _ _
1R5
1.5
C
BP
100
CDR32BP1R6B_ _ _
1R6
1.6
C
BP
100
CDR32BP1R8B_ _ _
1R8
1.8
C
BP
100
CDR32BP2R0B_ _ _
2R0
2
C
BP
100
CDR32BP2R2B_ _ _
2R2
2.2
C
BP
100
CDR32BP2R4B_ _ _
2R4
2.4
C
BP
100
CDR32BP2R7B_ _ _
2R7
2.7
C, D
BP
100
CDR32BP3R0B_ _ _
3R0
3
C, D
BP
100
CDR32BP3R3B_ _ _
3R3
3.3
C, D
BP
100
CDR32BP3R6B_ _ _
3R6
3.6
C, D
BP
100
CDR32BP3R9B_ _ _
3R9
3.9
C, D
BP
100
CDR32BP4R3B_ _ _
4R3
4.3
C, D
BP
100
CDR32BP4R7B_ _ _
4R7
4.7
C, D
BP
100
CDR32BP5R1B_ _ _
5R1
5.1
C, D
BP
100
CDR32BP5R6B_ _ _
5R6
5.6
C, D
BP
100
CDR32BP6R2B_ _ _
6R2
6.2
C, D
BP
100
CDR32BP6R8B_ _ _
6R8
6.8
C, D
BP
100
CDR32BP7R5B_ _ _
7R5
7.5
C, D
BP
100
CDR32BP8R2B_ _ _
8R2
8.2
C, D
BP
100
CDR32BP9R1B_ _ _
9R1
9.1
C, D
BP
100
CDR32BP100B_ _ _
100
10
F, J, K
BP
100
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
Revision: 28-Mar-13
Document Number: 45026
200
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CDR-MIL-PRF-55681
www.vishay.com
Vishay Vitramon
MIL-C-55681 QUALIFIED, TYPE CDR
MILITARY TYPE
DESIGNATION
CAPACITANCE
CODE
CAPACITANCE
(pF)
CAPACITANCE
TOLERANCE
RATED TEMP. AND
VOLTAGE TEMP. LIMITS
VOLTAGE
(DC)
CDR32BP110B_ _ _
110
11
F, J, K
BP
100
CDR32BP120B_ _ _
120
12
F, J, K
BP
100
CDR32BP130B_ _ _
130
13
F, J, K
BP
100
CDR32BP150B_ _ _
150
15
F, J, K
BP
100
CDR32BP160B_ _ _
160
16
F, J, K
BP
100
CDR32BP180B_ _ _
180
18
F, J, K
BP
100
CDR32BP200B_ _ _
200
20
F, J, K
BP
100
CDR32BP220B_ _ _
220
22
F, J, K
BP
100
CDR32BP240B_ _ _
240
24
F, J, K
BP
100
CDR32BP270B_ _ _
270
27
F, J, K
BP
100
CDR32BP300B_ _ _
300
30
F, J, K
BP
100
CDR32BP330B_ _ _
330
33
F, J, K
BP
100
CDR32BP360B_ _ _
360
36
F, J, K
BP
100
CDR32BP390B_ _ _
390
39
F, J, K
BP
100
CDR32BP430B_ _ _
430
43
F, J, K
BP
100
CDR32BP470B_ _ _
470
47
F, J, K
BP
100
CDR32BP510B_ _ _
510
51
F, J, K
BP
100
CDR32BP560B_ _ _
560
56
F, J, K
BP
100
CDR32BP620B_ _ _
620
62
F, J, K
BP
100
CDR32BP680B_ _ _
680
68
F, J, K
BP
100
CDR32BP750B_ _ _
750
75
F, J, K
BP
100
CDR32BP820B_ _ _
820
82
F, J, K
BP
100
CDR32BP910B_ _ _
910
91
F, J, K
BP
100
CDR32BP101B_ _ _
101
100
F, J, K
BP
100
CDR32BP111B_ _ _
111
110
F, J, K
BP
100
CDR32BP121B_ _ _
121
120
F, J, K
BP
100
CDR32BP131B_ _ _
131
130
F, J, K
BP
100
CDR32BP151B_ _ _
151
150
F, J, K
BP
100
CDR32BP161B_ _ _
161
160
F, J, K
BP
100
CDR32BP181B_ _ _
181
180
F, J, K
BP
100
CDR32BP201B_ _ _
201
200
F, J, K
BP
100
CDR32BP221B_ _ _
221
220
F, J, K
BP
100
CDR32BP241B_ _ _
241
240
F, J, K
BP
100
CDR32BP271B_ _ _
271
270
F, J, K
BP
100
CDR32BP301B_ _ _
301
300
F, J, K
BP
100
CDR32BP331B_ _ _
331
330
F, J, K
BP
100
CDR32BP361B_ _ _
361
360
F, J, K
BP
100
CDR32BP391B_ _ _
391
390
F, J, K
BP
100
CDR32BP431B_ _ _
431
430
F, J, K
BP
100
CDR32BP471B_ _ _
471
470
F, J, K
BP
100
CDR32BP511B_ _ _
511
510
F, J, K
BP
100
CDR32BP561B_ _ _
561
560
F, J, K
BP
100
CDR32BP621B_ _ _
621
620
F, J, K
BP
100
CDR32BP681B_ _ _
681
680
F, J, K
BP
100
CDR32BP751B_ _ _
751
750
F, J, K
BP
100
CDR32BP821B_ _ _
821
820
F, J, K
BP
100
RoHS
STATUS
CDR32BP
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
Revision: 28-Mar-13
Document Number: 45026
201
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CDR-MIL-PRF-55681
www.vishay.com
Vishay Vitramon
MIL-C-55681 QUALIFIED, TYPE CDR
MILITARY TYPE
DESIGNATION
CDR32BP
CDR32BP911B_ _ _
CDR32BP102B_ _ _
CDR32BP112A_ _ _
CDR32BP122A_ _ _
CDR32BP132A_ _ _
CDR32BP152A_ _ _
CDR32BP162A_ _ _
CDR32BP182A_ _ _
CDR32BP202A_ _ _
CDR32BP222A_ _ _
CDR32BX
CDR32BX472B_ _ _
CDR32BX562B_ _ _
CDR32BX682B_ _ _
CDR32BX822B_ _ _
CDR32BX103B_ _ _
CDR32BX123B_ _ _
CDR32BX153B_ _ _
CDR32BX183A_ _ _
CDR32BX223A_ _ _
CDR32BX273A_ _ _
CDR32BX333A_ _ _
CDR32BX393A_ _ _
CDR33BP
CDR33BP102B_ _ _
CDR33BP112B_ _ _
CDR33BP122B_ _ _
CDR33BP132B_ _ _
CDR33BP152B_ _ _
CDR33BP162B_ _ _
CDR33BP182B_ _ _
CDR33BP202B_ _ _
CDR33BP222B_ _ _
CDR33BP242A_ _ _
CDR33BP272A_ _ _
CDR33BP302A_ _ _
CDR33BP332A_ _ _
CDR33BX
CDR33BX153B_ _ _
CDR33BX183B_ _ _
CDR33BX223B_ _ _
CDR33BX273B_ _ _
CDR33BX393A_ _ _
CDR33BX473A_ _ _
CDR33BX563A_ _ _
CDR33BX683A_ _ _
CDR33BX823A_ _ _
CDR33BX104A_ _ _
CAPACITANCE
CODE
CAPACITANCE
(pF)
CAPACITANCE
TOLERANCE
RATED TEMP. AND
VOLTAGE TEMP. LIMITS
VOLTAGE
(DC)
911
102
112
122
132
152
162
182
202
222
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
100
100
50
50
50
50
50
50
50
50
472
562
682
822
103
123
153
183
223
273
333
393
4700
5600
6800
8200
10 000
12 000
15 000
18 000
22 000
27 000
33 000
39 000
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
100
100
100
100
100
100
100
50
50
50
50
50
102
112
122
132
152
162
182
202
222
242
272
302
332
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
F, J, K
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
BP
100
100
100
100
100
100
100
100
100
50
50
50
50
153
183
223
273
393
473
563
683
823
104
15 000
18 000
22 000
27 000
39 000
47 000
56 000
68 000
82 000
100 000
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
K, M
BX
BX
BX
BX
BX
BX
BX
BX
BX
BX
100
100
100
100
50
50
50
50
50
50
RoHS
STATUS
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
Revision: 28-Mar-13
Document Number: 45026
202
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CDR-MIL-PRF-55681
www.vishay.com
Vishay Vitramon
MIL-C-55681 QUALIFIED, TYPE CDR
MILITARY TYPE
DESIGNATION
CAPACITANCE
CODE
CAPACITANCE
(pF)
CAPACITANCE
TOLERANCE
RATED TEMP. AND
VOLTAGE TEMP. LIMITS
VOLTAGE
(DC)
CDR34BP222B_ _ _
222
2200
F, J, K
BP
100
CDR34BP242B_ _ _
242
2400
F, J, K
BP
100
CDR34BP272B_ _ _
272
2700
F, J, K
BP
100
CDR34BP302B_ _ _
302
3000
F, J, K
BP
100
CDR34BP332B_ _ _
332
3300
F, J, K
BP
100
CDR34BP362B_ _ _
362
3600
F, J, K
BP
100
CDR34BP392B_ _ _
392
3900
F, J, K
BP
100
CDR34BP432B_ _ _
432
4300
F, J, K
BP
100
CDR34BP472B_ _ _
472
4700
F, J, K
BP
100
CDR34BP512A_ _ _
512
5100
F, J, K
BP
50
CDR34BP562A_ _ _
562
5600
F, J, K
BP
50
CDR34BP622A_ _ _
622
6200
F, J, K
BP
50
CDR34BP682A_ _ _
682
6800
F, J, K
BP
50
CDR34BP752A_ _ _
752
7500
F, J, K
BP
50
CDR34BP822A_ _ _
822
8200
F, J, K
BP
50
CDR34BP912A_ _ _
912
9100
F, J, K
BP
50
CDR34BP103A_ _ _
103
10 000
F, J, K
BP
50
CDR34BX273B_ _ _
273
27 000
K, M
BX
100
CDR34BX333B_ _ _
333
33 000
K, M
BX
100
CDR34BX393B_ _ _
393
39 000
K, M
BX
100
CDR34BX473B_ _ _
473
47 000
K, M
BX
100
CDR34BX563B_ _ _
563
56 000
K, M
BX
100
CDR34BX104A_ _ _
104
100 000
K, M
BX
50
CDR34BX124A_ _ _
124
120 000
K, M
BX
50
CDR34BX154A_ _ _
154
150 000
K, M
BX
50
CDR34BX184A_ _ _
184
180 000
K, M
BX
50
CDR35BP472B_ _ _
472
4700
F, J, K
BP
100
CDR35BP512B_ _ _
512
5100
F, J, K
BP
100
CDR35BP562B_ _ _
562
5600
F, J, K
BP
100
CDR35BP622B_ _ _
622
6200
F, J, K
BP
100
CDR35BP682B_ _ _
682
6800
F, J, K
BP
100
CDR35BP752B_ _ _
752
7500
F, J, K
BP
100
CDR35BP822B_ _ _
822
8200
F, J, K
BP
100
CDR35BP912B_ _ _
912
9100
F, J, K
BP
100
CDR35BP103B_ _ _
103
10 000
F, J, K
BP
100
CDR35BP113A_ _ _
113
11 000
F, J, K
BP
50
CDR35BP123A_ _ _
123
12 000
F, J, K
BP
50
CDR35BP133A_ _ _
133
13 000
F, J, K
BP
50
CDR35BP153A_ _ _
153
15 000
F, J, K
BP
50
CDR35BP163A_ _ _
163
16 000
F, J, K
BP
50
CDR35BP183A_ _ _
183
18 000
F, J, K
BP
50
CDR35BP203A_ _ _
203
20 000
F, J, K
BP
50
CDR35BP223A_ _ _
223
22 000
F, J, K
BP
50
RoHS
STATUS
CDR34BP
CDR34BX
CDR35BP
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
Revision: 28-Mar-13
Document Number: 45026
203
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CDR-MIL-PRF-55681
www.vishay.com
Vishay Vitramon
MIL-C-55681 QUALIFIED, TYPE CDR
MILITARY TYPE
DESIGNATION
CAPACITANCE
CODE
CAPACITANCE
(pF)
CAPACITANCE
TOLERANCE
RATED TEMP. AND
VOLTAGE TEMP. LIMITS
VOLTAGE
(DC)
RoHS
STATUS
CDR35BX
CDR35BX563B_ _ _
563
56 000
K, M
BX
100
CDR35BX683B_ _ _
683
68 000
K, M
BX
100
CDR35BX823B_ _ _
823
82 000
K, M
BX
100
CDR35BX104B_ _ _
104
100 000
K, M
BX
100
CDR35BX124B_ _ _
124
120 000
K, M
BX
100
CDR35BX154B_ _ _
154
150 000
K, M
BX
100
CDR35BX184A_ _ _
184
180 000
K, M
BX
50
CDR35BX224A_ _ _
224
220 000
K, M
BX
50
CDR35BX274A_ _ _
274
270 000
K, M
BX
50
CDR35BX334A_ _ _
334
330 000
K, M
BX
50
CDR35BX394A_ _ _
394
390 000
K, M
BX
50
CDR35BX474A_ _ _
474
470 000
K, M
BX
50
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
TAPE AND REEL QUANTITIES (1)(2)(3)
STYLES
BODY SIZE
TAPE SIZE
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
PACKAGING CODE
PACKAGING CODE
BULK
“C”
“T”
“J”
“P”
“R”
“B”
8 mm
3000
3000
1000
10 000
10 000
100
1206
8 mm
n/a
3000
1000
n/a
10 000
100
1210
8 mm
n/a
3000
1000
n/a
10 000
100
CDR02
1805
12 mm
n/a
2000
500
n/a
10 000
100
CDR03
1808
12 mm
n/a
2000
500
n/a
10 000
100
CDR04,
CDR34
1812
12 mm
n/a
1000
500
n/a
4000
100
CDR35
1825
12 mm
n/a
1000
500
n/a
4000
100
CDR06
2225
12 mm
n/a
1000
500
n/a
4000
100
CDR01,
CDR31
0805
CDR32
CDR33
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape and punched paper carrier tape
(2) Paper tape is not available for case sizes > 1206 or for component thickness > 0.035" (0.89 mm)
(3) DC voltage rating should not be exceeded in application
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to + 40 °C ambient temperature and  70 % related humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 28-Mar-13
Document Number: 45026
204
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 03029
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
DSCC Qualified Type 03029
FEATURES
• US defense supply center approved
Available
• Federal stock control number,
CAGE CODE SHV71
Available
• Small case size (0402)
• Stable BP, BR and BX dielectrics
• Excellent aging characteristics
• Lead (Pb)-free termination code “M”
• Tin/lead termination code “Z”
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Made with a combination of design, materials and tight
process control to achieve very high field reliability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
APPLICATIONS
•
•
•
•
•
Broadband wireless communication
Satellite communication
WiFi (802.11) and WiMax (802.16)
Subscriber based wireless devices
Microwave systems
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range:
BP: 1.0 pF to 180 pF
BR: 100 pF to 10 nF
BX: 100 pF to 8.2 nF
Voltage Range: 6.3 VDC to 100 VDC
Temperature Coefficient of Capacitance (TCC):
BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
with zero (0) VDC applied
BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
with 100 % rated VDC applied
BR: ± 15 % from -55 °C to +125 °C
with zero (0) VDC applied
BR: +15 %, -40 % from -55 °C to +125 °C
with 100 % rated VDC applied
BX: ± 15 % from -55 °C to +125 °C
with zero (0) VDC applied
BX: +15 %, -25 % from -55 °C to +125 °C
with 100 % rated VDC applied
Revision: 09-May-14
Dissipation Factor (DF):
BP:
0.15 % max. at 1.0 VRMS and 1 MHz for values  1000 pF
0.15 % max. at 1.0 VRMS and 1 kHz for values > 1000 pF
BR, BX:
 25 V: ± 3.5 % max. at 1.0 VRMS and 1 kHz
 50 V: ± 2.5 % max. at 1.0 VRMS and 1 kHz
Aging Rate:
BP: 0 % maximum per decade
BR, BX: 1 % maximum per decade
Insulation Resistance (IR):
at +25 °C and rated voltage 100 000 M minimum or
1000 F, whichever is less
at +125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less
Dielectric Strength Test:
performed per method 103 of EIA-198-2-E.
Applied test voltages
 200 VDC-rated: 250 % of rated voltage
Document Number: 45042
205
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 03029
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
CAPACITANCE
DIELECTRIC
CASE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
BP
0402
100
1.0 pF
180 pF
BR
0402
50
100 pF
10 nF
BX
0402
50
100 pF
8.2 nF
Note
• Detail ratings see selection chart
ORDERING INFORMATION
03029-
BX
102
B
J
Z
-
T
DSCC
NUMBER
DIELECTRIC
CAPACITANCE
NOMINAL CODE
DC VOLTAGE
RATING (1)
CAPACITANCE
TOLERANCE
TERMINATION
GROUP C
TESTING OPTION
PACKAGING
Case code
0402
BP
BR
BX
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An “R”
indicates a
decimal point.
Examples:
1R8 = 1.8 pF
101 = 100 pF
W = 6.3 V
X = 10 V
Y = 16 V
Z = 25 V
A = 50 V
B = 100 V
C = ± 0.25 pF
D = ± 0.5 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Note:
C, D < 10 pF
(BP)
F, G, J, K, M
 10 pF (BP)
J, K, M (BR, BX)
M = silver
palladium
Z = Ni barrier
with tin/lead
plate min. 4 %
lead
C = full group C
L = 2000 h life
test only
M = 1000 h life
test only
H = low voltage
humidity test only
- = no group C
testing
C = 7" reel/paper tape
O = 7" reel/flamed paper tape
J = 7" reel (low quantity)
P = 11 1/4"/13" reel/paper tape
I = 11 1/4"/13" reel/flamed paper tape
B = bulk
Note: “I” and “O” are used for
“M” termination code
Note
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
PART ORDERING
NUMBER
03029-
TERMINATION PAD
(P)
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
0.040 ± 0.004
(1.02 ± 0.10)
0.020 ± 0.004
(0.51 ± 0.10)
0.024
(0.61)
0.004
(0.10)
0.016
(0.41)
Note
• Metric equivalents are given for general information only
Revision: 09-May-14
Document Number: 45042
206
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 03029
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
BP
BR
STYLE
BX
03029
CASE CODE
0402
VOLTAGE (VDC)
VOLTAGE CODE
6.3
10
16
25
50
100
6.3
10
16
25
50
6.3
10
16
25
50
W
X
Y
Z
A
B
W
X
Y
Z
A
W
X
Y
Z
A
CAP. CODE
CAP.
1R0
1.0 pF
•
•
•
•
•
•
1R2
1.2 pF
•
•
•
•
•
•
1R5
1.5 pF
•
•
•
•
•
•
1R8
1.8 pF
•
•
•
•
•
•
2R2
2.2 pF
•
•
•
•
•
•
2R4
2.4 pF
•
•
•
•
•
•
2R7
2.7 pF
•
•
•
•
•
•
3R0
3.0 pF
•
•
•
•
•
•
3R3
3.3 pF
•
•
•
•
•
•
3R6
3.6 pF
•
•
•
•
•
•
3R9
3.9 pF
•
•
•
•
•
•
4R7
4.7 pF
•
•
•
•
•
•
5R1
5.1 pF
•
•
•
•
•
•
5R6
5.6 pF
•
•
•
•
•
•
6R2
6.2 pF
•
•
•
•
•
•
6R8
6.8 pF
•
•
•
•
•
•
7R5
7.5 pF
•
•
•
•
•
•
8R2
8.2 pF
•
•
•
•
•
•
9R1
9.1 pF
•
•
•
•
•
•
100
10 pF
•
•
•
•
•
•
110
11 pF
•
•
•
•
•
•
120
12 pF
•
•
•
•
•
•
130
13 pF
•
•
•
•
•
•
150
15 pF
•
•
•
•
•
•
160
16 pF
•
•
•
•
•
•
180
18 pF
•
•
•
•
•
•
200
20 pF
•
•
•
•
•
•
220
22 pF
•
•
•
•
•
•
240
24 pF
•
•
•
•
•
•
270
27 pF
•
•
•
•
•
•
300
30 pF
•
•
•
•
•
•
330
33 pF
•
•
•
•
•
•
360
36 pF
•
•
•
•
•
•
390
39 pF
•
•
•
•
•
•
430
43 pF
•
•
•
•
•
•
470
47 pF
•
•
•
•
•
•
510
51 pF
•
•
•
•
•
•
560
56 pF
•
•
•
•
•
•
620
62 pF
•
•
•
•
•
•
680
68 pF
•
•
•
•
•
•
750
75 pF
•
•
•
•
•
•
820
82 pF
•
•
•
•
•
•
910
91 pF
•
•
•
•
•
•
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “Z”
Not RoHS-compliant
Revision: 09-May-14
Document Number: 45042
207
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 03029
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
BP
BR
STYLE
BX
03029
CASE CODE
0402
VOLTAGE (VDC)
6.3
10
16
25
50
100
6.3
10
16
25
50
6.3
10
16
25
50
VOLTAGE CODE
W
X
Y
Z
A
B
W
X
Y
Z
A
W
X
Y
Z
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CAP. CODE
CAP.
101
100 pF
•
•
•
•
•
•
•
•
•
121
120 pF
•
•
•
•
•
•
•
•
•
151
150 pF
•
•
•
•
•
•
•
•
•
181
180 pF
•
•
•
•
•
•
•
•
•
221
220 pF
•
•
•
271
270 pF
•
•
•
331
330 pF
•
•
•
391
390 pF
•
•
•
471
470 pF
•
•
•
561
560 pF
•
•
•
681
680 pF
•
•
•
821
820 pF
•
•
•
102
1.0 nF
•
•
•
122
1.2 nF
•
•
•
152
1.5 nF
•
•
•
182
1.8 nF
•
•
•
222
2.2 nF
•
•
•
272
2.7 nF
•
•
•
332
3.3 nF
•
•
•
392
3.9 nF
•
•
•
472
4.7 nF
•
•
•
562
5.6 nF
•
•
•
682
6.8 nF
•
•
•
822
8.2 nF
•
•
•
103
10 nF
•
•
•
123
12 nF
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “Z”
Not RoHS-compliant
DSCC PACKAGING QUANTITIES (1)
CASE CODE
TAPE SIZE
0402
8 mm
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
BULK
PACKAGING CODE
PACKAGING CODE
VIAL PACKAGING CODE
“C”/“O”
“J”
“P”/“I”
“B”
5000
1000
10 000
100
Note
(1) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to +40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 09-May-14
Document Number: 45042
208
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 03028
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
DSCC Qualified Type 03028
FEATURES
• US defense supply center approved
Available
• Federal stock control number,
CAGE CODE SHV71
Available
• Small case size (0603)
• Stable BP, BR and BX dielectrics
• Excellent aging characteristics
• Lead (Pb)-free termination code “M”
• Tin/lead termination code “Z”
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Made with a combination of design, materials and tight
process control to achieve very high field reliability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
APPLICATIONS
•
•
•
•
•
Broadband wireless communication
Satellite communication
WiFi (802.11) and WiMax (802.16)
Subscriber based wireless devices
Microwave systems
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Dissipation Factor (DF):
Capacitance Range:
BP: 1.0 pF to 1.0 nF
BR: 100 pF to 100 nF
BX: 100 pF to 100 nF
BP:
0.15 % max. at 1.0 VRMS and 1 MHz for values  1000 pF
0.15 % max. at 1.0 VRMS and 1 kHz for values > 1000 pF
BR, BX:
 25 V: ± 3.5 % max. at 1.0 VRMS and 1 kHz
 50 V: ± 2.5 % max. at 1.0 VRMS and 1 kHz
Voltage Range: 6.3 VDC to 100 VDC
Temperature Coefficient of Capacitance (TCC):
BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
with zero (0) VDC applied
BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
with 100 % rated VDC applied
BR: ± 15 % from -55 °C to +125 °C
with zero (0) VDC applied
BR: +15 %, -40 % from -55 °C to +125 °C
with 100 % rated VDC applied
BX: ± 15 % from -55 °C to +125 °C
with zero (0) VDC applied
BX: +15 %, -25 % from -55 °C to +125 °C
with 100 % rated VDC applied
Revision: 09-May-14
Aging Rate:
BP: 0 % maximum per decade
BR, BX: 1 % maximum per decade
Insulation Resistance (IR):
at +25 °C and rated voltage 100 000 M minimum or
1000 F, whichever is less
at +125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less
Dielectric Strength Test:
performed per method 103 of EIA-198-2-E.
Applied test voltages
 200 VDC-rated: 250 % of rated voltage
Document Number: 45043
209
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 03028
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
CAPACITANCE
DIELECTRIC
CASE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
BP
0603
100
1.0 pF
1.0 nF
BR
0603
100
100 pF
100 nF
BX
0603
100
100 pF
100 nF
Note
• Detail ratings see selection chart
ORDERING INFORMATION
03028-
BX
102
B
J
Z
-
T
DSCC
NUMBER
DIELECTRIC
CAPACITANCE
NOMINAL CODE
DC VOLTAGE
RATING (1)
CAPACITANCE
TOLERANCE
TERMINATION
GROUP C
TESTING OPTION
PACKAGING
Case code
0603
BP
BR
BX
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An “R”
indicates a
decimal point.
Examples:
1R8 = 1.8 pF
101 = 100 pF
W = 6.3 V
X = 10 V
Y = 16 V
Z = 25 V
A = 50 V
B = 100 V
C = ± 0.25 pF
D = ± 0.5 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Note:
C, D < 10 pF (BP)
F, G, J, K, M
 10 pF (BP)
J, K, M (BR, BX)
M = silver
palladium
Z = Ni barrier
with tin/lead
plate min. 4 %
lead
C = full group C
L = 2000 h life
test only
M = 1000 h life
test only
H = low voltage
humidity
test only
- = no group C
testing
T = 7" reel/plastic tape
C = 7" reel/paper tape
O = 7" reel/flamed paper tape
J = 7" reel (low quantity)
R = 11 1/4"/13" reel/plastic tape
P = 11 1/4"/13" reel/paper tape
I = 11 1/4"/13" reel/flamed paper
tape
B = bulk
Note:
“I” and “O” are used for
“M” termination code
Note
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
TERMINATION PAD
(P)
PART ORDERING
NUMBER
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
03028-
0.063 ± 0.006
(1.60 ± 0.15)
0.032 ± 0.006
(0.81 ± 0.15)
0.036
(0.91)
0.008
(0.20)
0.020
(0.51)
Note
• Metric equivalents are given for general information only
Revision: 09-May-14
Document Number: 45043
210
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 03028
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
BP
BR
STYLE
BX
03028
CASE CODE
0603
VOLTAGE (VDC)
6.3
10
16
25
50
100
6.3
10
16
25
50
100
6.3
10
16
25
50
100
VOLTAGE CODE
W
X
Y
Z
A
B
W
X
Y
Z
A
B
W
X
Y
Z
A
B
CAP. CODE
CAP.
1R0
1.0 pF
•
•
•
•
•
•
1R2
1.2 pF
•
•
•
•
•
•
1R5
1.5 pF
•
•
•
•
•
•
1R8
1.8 pF
•
•
•
•
•
•
2R2
2.2 pF
•
•
•
•
•
•
2R4
2.4 pF
•
•
•
•
•
•
2R7
2.7 pF
•
•
•
•
•
•
3R0
3.0 pF
•
•
•
•
•
•
3R3
3.3 pF
•
•
•
•
•
•
3R6
3.6 pF
•
•
•
•
•
•
3R9
3.9 pF
•
•
•
•
•
•
4R7
4.7 pF
•
•
•
•
•
•
5R1
5.1 pF
•
•
•
•
•
•
5R6
5.6 pF
•
•
•
•
•
•
6R2
6.2 pF
•
•
•
•
•
•
6R8
6.8 pF
•
•
•
•
•
•
7R5
7.5 pF
•
•
•
•
•
•
8R2
8.2 pF
•
•
•
•
•
•
9R1
9.1 pF
•
•
•
•
•
•
100
10 pF
•
•
•
•
•
•
110
11 pF
•
•
•
•
•
•
120
12 pF
•
•
•
•
•
•
130
13 pF
•
•
•
•
•
•
150
15 pF
•
•
•
•
•
•
160
16 pF
•
•
•
•
•
•
180
18 pF
•
•
•
•
•
•
200
20 pF
•
•
•
•
•
•
220
22 pF
•
•
•
•
•
•
240
24 pF
•
•
•
•
•
•
270
27 pF
•
•
•
•
•
•
300
30 pF
•
•
•
•
•
•
330
33 pF
•
•
•
•
•
•
360
36 pF
•
•
•
•
•
•
390
39 pF
•
•
•
•
•
•
430
43 pF
•
•
•
•
•
•
470
47 pF
•
•
•
•
•
•
510
51 pF
•
•
•
•
•
•
560
56 pF
•
•
•
•
•
•
620
62 pF
•
•
•
•
•
•
680
68 pF
•
•
•
•
•
•
750
75 pF
•
•
•
•
•
•
820
82 pF
•
•
•
•
•
•
910
91 pF
•
•
•
•
•
•
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “Z”
Not RoHS-compliant
Revision: 09-May-14
Document Number: 45043
211
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 03028
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
BP
BR
STYLE
BX
03028
CASE CODE
0603
VOLTAGE (VDC)
6.3
10
16
25
50
100
6.3
10
16
25
50
100
6.3
10
16
25
50
100
VOLTAGE CODE
W
X
Y
Z
A
B
W
X
Y
Z
A
B
W
X
Y
Z
A
B
CAP. CODE
CAP.
101
100 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
121
120 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
151
150 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
181
180 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
221
220 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
271
270 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
331
330 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
391
390 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
471
470 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
561
560 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
681
680 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
102
1.0 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
122
1.2 nF
•
•
•
•
•
•
•
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
•
•
•
•
•
•
•
182
1.8 nF
•
•
•
•
•
•
•
•
•
•
•
•
222
2.2 nF
•
•
•
•
•
•
•
•
•
•
•
•
272
2.7 nF
•
•
•
•
•
•
•
•
•
•
•
•
332
3.3 nF
•
•
•
•
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
•
•
•
•
472
4.7 nF
•
•
•
•
•
•
•
•
•
•
•
562
5.6 nF
•
•
•
•
•
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
•
•
•
•
•
•
822
8.2 nF
•
•
•
•
•
•
•
•
•
•
•
103
10 nF
•
•
•
•
•
•
•
•
•
•
123
12 nF
•
•
•
•
•
•
•
•
•
153
15 nF
•
•
•
•
•
•
•
•
•
183
18 nF
•
•
•
•
•
•
•
•
•
223
22 nF
•
•
•
•
•
•
•
•
•
273
27 nF
•
•
•
•
•
•
•
•
•
333
33 nF
•
•
•
•
•
•
•
393
39 nF
•
•
•
•
•
•
•
473
47 nF
•
•
•
•
•
•
•
563
56 nF
•
•
•
•
•
•
•
683
68 nF
•
•
•
•
823
82 nF
•
•
•
•
104
100 nF
•
•
•
•
124
120 nF
154
150 nF
184
180 nF
224
220 nF
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “Z”
Not RoHS-compliant
Revision: 09-May-14
Document Number: 45043
212
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 03028
www.vishay.com
Vishay Vitramon
DSCC PACKAGING QUANTITIES (1)
CASE CODE
TAPE SIZE
0603
8 mm
7" REEL QUANTITIES
11 1/4" AND 13" REEL QUANTITIES
BULK
PACKAGING CODE
PACKAGING CODE
VIAL PACKAGING CODE
“C”/“O”/“T”
“J”
“P”/“I”/“R”
“B”
4000
1000
10 000
100
Note
(1) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to +40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 09-May-14
Document Number: 45043
213
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05006
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
DSCC Qualified Type 05006
FEATURES
• US defense supply center approved
Available
• Federal stock control number,
CAGE CODE SHV71
Available
• Case size 0805
• Stable BP, BR and BX dielectrics
• Excellent aging characteristics
• Lead (Pb)-free termination code “M”
• Tin/lead termination code “Z” and “U”
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Made with a combination of design, materials and tight
process control to achieve very high field reliability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
APPLICATIONS
•
•
•
•
•
•
Avionic application
Sonar applications
Satellite systems
Missiles applications
Geographical information systems
Global positioning systems
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range:
BP: 1.0 pF to 3.3 nF
BR: 100 pF to 220 nF
BX: 100 pF to 180 nF
Voltage Range: 10 VDC to 200 VDC
Temperature Coefficient of Capacitance (TCC):
BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
with zero (0) VDC applied
BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
with 100 % rated VDC applied
BR: ± 15 % from -55 °C to +125 °C
with zero (0) VDC applied
BR: +15 %, -40 % from -55 °C to +125 °C
with 100 % rated VDC applied
BX: ± 15 % from -55 °C to +125 °C
with zero (0) VDC applied
BX: +15 %, -25 % from -55 °C to +125 °C
with 100 % rated VDC applied
Revision: 09-May-14
Dissipation Factor (DF):
BP:
0.15 % max. at 1.0 VRMS and 1 MHz for values  1000 pF
0.15 % max. at 1.0 VRMS and 1 kHz for values > 1000 pF
BR and BX:
 25 V: 3.5 % max. at 1.0 VRMS and 1 kHz
 50 V: 2.5 % max. at 1.0 VRMS and 1 kHz
Aging Rate:
BP: 0 % maximum per decade
BR, BX: 1 % maximum per decade
Insulation Resistance (IR):
at +25 °C and rated voltage 100 000 M minimum or
1000 F, whichever is less
at +125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less
Dielectric Strength Test:
performed per method 103 of EIA-198-2-E.
Applied test voltages
 200 VDC-rated: 250 % of rated voltage
Document Number: 45048
214
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05006
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
MAXIMUM VOLTAGE
(V)
CASE
MINIMUM
MAXIMUM
BP
0805
200
1.0 pF
3.3 nF
BR
0805
100
100 pF
220 nF
BX
0805
100
100 pF
180 nF
Note
• Detail ratings see “Selection Chart”
ORDERING INFORMATION
05006-
BP
101
B
J
X
-
T
DSCC
NUMBER
DIELECTRIC
CAPACITANCE
NOMINAL CODE
DC VOLTAGE
RATING (1)
CAPACITANCE
TOLERANCE
TERMINATION
GROUP C TESTING
OPTION (2)
PACKAGING
Case code
0805
BP
BR
BX
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An “R”
indicates a
decimal point.
Examples:
1R8 = 1.8 pF
101 = 100 pF
X = 10 V
Y = 16 V
Z = 25 V
A = 50 V
B = 100 V
C = 200 V
C = ± 0.25 pF
D = ± 0.5 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Note:
C, D < 10 pF (BP)
F, G, J, K, M
 10 pF (BP)
J, K, M (BR, BX)
M = silver
palladium
Z = Ni barrier
with tin/lead
plate min. 4 %
lead
U (2) =
hot solder
dipped
(min. 4 % lead)
C = full group C
L = 2000 h life
test only
M = 1000 h life
test only
H = low voltage
humidity
test only
- = no group C
testing
T = 7" reel/plastic tape
C = 7" reel/paper tape
O = 7" reel/flamed paper tape
J = 7" reel (low quantity)
R = 11 1/4"/13" reel/plastic tape
P = 11 1/4"/13" reel/paper tape
I = 11 1/4"/13" reel/flamed
paper tape
B = bulk
Note: “I” and “O” are used for
“M” termination code
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
(2) “U” termination part number code for DSCC product length, width and thickness dimensions positive tolerances (including bandwidth) above
are allowed to increase by the following amounts: length 0.020" (0.51 mm), width/thickness 0.015" (0.38 mm)
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
PART ORDERING
NUMBER
05006-
TERMINATION PAD
(P)
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
0.080 ± 0.008
(2.03 ± 0.20)
0.050 ± 0.008
(1.27 ± 0.20)
0.055
(1.40)
0.012
(0.30)
0.028
(0.71)
Note
• Metric equivalents are given for general information only
Revision: 09-May-14
Document Number: 45048
215
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05006
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
BP
BR
STYLE
05006
CASE CODE
0805
VOLTAGE (VDC)
10
16
25
50
100
200
10
16
25
50
100
VOLTAGE CODE
X
Y
Z
A
B
C
X
Y
Z
A
B
CAP. CODE
CAP.
1R0
1.0 pF
•
•
•
•
+
•
1R2
1.2 pF
•
•
•
•
+
•
1R5
1.5 pF
•
•
•
•
+
•
•
•
•
•
+
•
1R8
1.8 pF
2R2
2.2 pF
•
•
•
•
+
•
2R7
2.7 pF
•
•
•
•
+
•
•
•
•
•
+
•
3R3
3.3 pF
3R9
3.9 pF
•
•
•
•
+
•
4R7
4.7 pF
•
•
•
•
+
•
•
•
•
•
+
•
5R6
5.6 pF
6R8
6.8 pF
•
•
•
•
+
•
8R2
8.2 pF
•
•
•
•
+
•
•
•
•
•
+
•
100
10 pF
120
12 pF
•
•
•
•
+
•
150
15 pF
•
•
•
•
+
•
•
•
•
•
+
•
180
18 pF
220
22 pF
•
•
•
•
+
•
270
27 pF
•
•
•
•
+
•
•
•
•
•
+
•
330
33 pF
390
39 pF
•
•
•
•
+
•
470
47 pF
•
•
•
•
+
•
•
•
•
•
+
•
560
56 pF
680
68 pF
•
•
•
•
+
•
820
82 pF
•
•
•
•
+
•
•
•
•
•
+
•
•
•
•
•
•
101
100 pF
•
•
•
•
+
•
•
•
•
•
•
121
120 pF
151
150 pF
•
•
•
•
+
•
•
•
•
•
•
•
•
•
•
+
•
•
•
•
•
•
181
180 pF
221
220 pF
•
•
•
•
+
•
•
•
•
•
•
271
270 pF
•
•
•
•
+
•
•
•
•
•
•
•
•
•
•
+
•
•
•
•
•
•
331
330 pF
391
390 pF
•
•
•
•
+
•
•
•
•
•
•
471
470 pF
•
•
•
•
+
•
•
•
•
•
•
•
•
•
+
•
•
•
•
•
•
•
561
560 pF
681
680 pF
•
•
•
+
•
•
•
•
•
•
•
821
820 pF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
102
1.0 nF
122
1.2 nF
•
•
•
•
•
•
•
•
•
•
152
1.5 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
182
1.8 nF
222
2.2 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
272
2.7 nF
332
3.3 nF
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
•
•
•
472
4.7 nF
562
5.6 nF
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
•
•
•
•
•
822
8.2 nF
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
+ Use MIL-PRF-55681 (CDR) instead, part numbers removed from DSCC listing
Revision: 09-May-14
BX
10
X
16
Y
25
Z
50
A
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
+
•
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
•
•
•
Document Number: 45048
216
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05006
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
BP
BR
STYLE
05006
CASE CODE
0805
VOLTAGE (VDC)
10
16
25
50
100
200
10
16
25
50
100
VOLTAGE CODE
X
Y
Z
A
B
C
X
Y
Z
A
B
CAP. CODE
CAP.
•
•
•
•
•
103
10 nF
•
•
•
•
•
123
12 nF
•
•
•
•
•
153
15 nF
183
18 nF
•
•
•
•
•
•
•
•
•
•
223
22 nF
273
27 nF
•
•
•
•
•
333
33 nF
•
•
•
•
•
•
•
•
393
39 nF
473
47 nF
•
•
•
•
563
56 nF
•
•
•
•
•
•
•
•
683
68 nF
823
82 nF
•
•
•
•
104
100 nF
•
•
•
•
•
•
•
124
120 nF
154
150 nF
•
•
•
184
180 nF
•
•
•
•
224
220 nF
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
+ Use MIL-PRF-55681 (CDR) instead, part numbers removed from DSCC listing
BX
10
X
16
Y
25
Z
50
A
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
•
•
•
•
DSCC PACKAGING QUANTITIES (1)(2)
CASE CODE
TAPE SIZE
0805
8 mm
7" REEL QUANTITIES
PACKAGING CODE
“C”/”O”/“T”
“J”
3000
1000
11 1/4" AND 13" REEL QUANTITIES
PACKAGING CODE
“P”/“I”/”R”
10 000
BULK
VIAL PACKAGING CODE
“B”
100
Notes
(1) Vishay Vitramon uses embossed plastic carrier tape and punch paper carrier tape
(2) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to +40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 09-May-14
Document Number: 45048
217
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05007
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
DSCC Qualified Type 05007
FEATURES
• US defense supply center approved
Available
• Federal stock control number,
CAGE CODE SHV71
Available
• Case size 1206
• Stable BP, BR and BX dielectrics
• Excellent aging characteristics
• Tin/lead termination code “Z” and “U”
• Lead (Pb)-free termination code “M”
• Wet build process
• Reliable Noble Metal Electrode (NME) system
• Made with a combination of design, materials and tight
process control to achieve very high field reliability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
APPLICATIONS
•
•
•
•
•
•
Avionic application
Sonar applications
Satellite systems
Missiles applications
Geographical information systems
Global positioning systems
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at +25 °C unless otherwise specified
Operating Temperature: -55 °C to +125 °C
Capacitance Range:
BP: 1.0 pF to 6.8 nF
BR: 820 pF to 560 nF
BX: 820 pF to 470 nF
Voltage Range: 16 VDC to 200 VDC
Temperature Coefficient of Capacitance (TCC):
BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
with zero (0) VDC applied
BP: 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
with 100 % rated VDC applied
BR: ± 15 % from -55 °C to +125 °C
with zero (0) VDC applied
BR: +15 %, -40 % from -55 °C to +125 °C
with 100 % rated VDC applied
BX: ± 15 % from -55 °C to +125 °C
with zero (0) VDC applied
BX: +15 %, -25 % from -55 °C to +125 °C
with 100 % rated VDC applied
Revision: 13-Aug-14
Dissipation Factor (DF):
BP:
0.15 % max. at 1.0 VRMS and 1 MHz for values  1000 pF
0.15 % max. at 1.0 VRMS and 1 kHz for values > 1000 pF
BR and BX:
 25 V: 3.5 % max. at 1.0 VRMS and 1 kHz
 50 V: 2.5 % max. at 1.0 VRMS and 1 kHz
Aging Rate:
BP: 0 % maximum per decade
BR, BX: 1 % maximum per decade
Insulation Resistance (IR):
at +25 °C and rated voltage 100 000 M minimum or
1000 F, whichever is less
at +125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less
Dielectric Strength Test:
performed per method 103 of EIA-198-2-E.
Applied test voltages
 200 VDC-rated: 250 % of rated voltage
Document Number: 45049
218
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05007
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CAPACITANCE
MAXIMUM VOLTAGE
(V)
CASE
MINIMUM
MAXIMUM
BP
1206
200
1.0 pF
6.8 nF
BR
1206
100
820 pF
560 nF
BX
1206
100
820 pF
470 nF
Note
• Detail ratings see “Selection Chart”
ORDERING INFORMATION
05007-
BP
101
B
J
X
-
T
DSCC
NUMBER
DIELECTRIC
CAPACITANCE
NOMINAL CODE
DC VOLTAGE
RATING (1)
CAPACITANCE
TOLERANCE
TERMINATION
GROUP C TESTING
OPTION (2)
PACKAGING
Case code
1206
BP
BR
BX
Expressed in
picofarads (pF).
The first two
digits are
significant, the
third is a
multiplier. An “R”
indicates a
decimal point.
Examples:
1R8 = 1.8 pF
101 = 100 pF
X = 10 V
Y = 16 V
Z = 25 V
A = 50 V
B = 100 V
C = 200 V
C = ± 0.25 pF
D = ± 0.5 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Note:
C, D < 10 pF (BP)
F, G, J, K, M
 10 pF (BP)
J, K, M (BR, BX)
M = silver
palladium
Z = Ni barrier
with tin/lead
plate min. 4 %
lead
U (2) =
hot solder
dipped
(min. 4 % lead)
C = full group C
L = 2000 h life
test only
M = 1000 h life
test only
H = low voltage
humidity test only
- = no group C
testing
T = 7" reel/plastic tape
J = 7" reel (low quantity)
R = 11 1/4" reel/plastic tape
B = bulk
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
(2) “U” termination part number code for DSCC product length, width and thickness dimensions positive tolerances (including bandwidth) above
are allowed to increase by the following amounts: length 0.025" (0.64 mm), width/thickness 0.015" (0.38 mm)
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
PART ORDERING
NUMBER
05007-
TERMINATION PAD
(P)
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS
(T)
MINIMUM
MAXIMUM
0.125 ± 0.008
(3.18 ± 0.20)
0.062 ± 0.008
(1.57 ± 0.20)
0.059
(1.50)
0.010
(0.25)
0.030
(0.76)
Note
• Metric equivalents are given for general information only
Revision: 13-Aug-14
Document Number: 45049
219
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05007
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
BP
BR
STYLE
05007
CASE CODE
1206
VOLTAGE (VDC)
16
25
50
100
200
10
16
25
50
100
VOLTAGE CODE
Y
Z
A
B
C
X
Y
Z
A
B
CAP. CODE
CAP.
1R0
1.0 pF
•
•
•
+
•
1R2
1.2 pF
•
•
•
+
•
1R5
1.5 pF
•
•
•
+
•
•
•
•
+
•
1R8
1.8 pF
2R2
2.2 pF
•
•
•
+
•
2R7
2.7 pF
•
•
•
+
•
•
•
•
+
•
3R3
3.3 pF
3R9
3.9 pF
•
•
•
+
•
4R7
4.7 pF
•
•
•
+
•
•
•
•
+
•
5R6
5.6 pF
6R8
6.8 pF
•
•
•
+
•
8R2
8.2 pF
•
•
•
+
•
•
•
•
+
•
100
10 pF
120
12 pF
•
•
•
+
•
150
15 pF
•
•
•
+
•
•
•
•
+
•
180
18 pF
220
22 pF
•
•
•
+
•
270
27 pF
•
•
•
+
•
•
•
•
+
•
330
33 pF
390
39 pF
•
•
•
+
•
470
47 pF
•
•
•
+
•
•
•
•
+
•
560
56 pF
680
68 pF
•
•
•
+
•
820
82 pF
•
•
•
+
•
•
•
•
+
•
101
100 pF
•
•
•
+
•
121
120 pF
151
150 pF
•
•
•
+
•
•
•
•
+
•
181
180 pF
221
220 pF
•
•
•
+
•
271
270 pF
•
•
•
+
•
•
•
•
+
•
331
330 pF
391
390 pF
•
•
•
+
•
471
470 pF
•
•
•
+
•
•
•
•
+
•
561
560 pF
681
680 pF
•
•
•
+
•
821
820 pF
•
•
•
+
•
•
•
•
•
•
•
•
•
+
•
•
•
•
•
•
102
1.0 nF
122
1.2 nF
•
•
+
•
•
•
•
•
•
•
152
1.5 nF
•
•
+
•
•
•
•
•
•
•
•
•
+
•
•
•
•
•
•
•
182
1.8 nF
222
2.2 nF
•
•
+
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
272
2.7 nF
332
3.3 nF
•
•
•
•
•
•
•
•
•
392
3.9 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
472
4.7 nF
562
5.6 nF
•
•
•
•
•
•
•
•
682
6.8 nF
•
•
•
•
•
•
•
•
•
•
•
•
•
822
8.2 nF
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
+ Use MIL-PRF-55681 (CDR) instead, part numbers removed from DSCC listing
Revision: 13-Aug-14
BX
10
X
16
Y
25
Z
50
A
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
Document Number: 45049
220
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05007
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
BP
BR
STYLE
05007
CASE CODE
1206
VOLTAGE (VDC)
16
25
50
100
200
10
16
25
50
100
VOLTAGE CODE
Y
Z
A
B
C
X
Y
Z
A
B
CAP. CODE
CAP.
103
10 nF
•
•
•
•
•
123
12 nF
•
•
•
•
•
153
15 nF
•
•
•
•
•
183
18 nF
•
•
•
•
•
223
22 nF
•
•
•
•
•
273
27 nF
•
•
•
•
•
333
33 nF
•
•
•
•
•
393
39 nF
•
•
•
•
•
473
47 nF
•
•
•
•
•
563
56 nF
•
•
•
•
•
683
68 nF
•
•
•
•
823
82 nF
•
•
•
•
104
100 nF
•
•
•
•
124
120 nF
•
•
•
•
154
150 nF
•
•
•
•
184
180 nF
•
•
•
•
204
200 nF
•
•
•
•
224
220 nF
•
•
•
•
254
250 nF
•
•
•
274
270 nF
•
•
•
334
330 nF
•
•
•
394
390 nF
•
•
•
474
470 nF
•
•
564
560 nF
•
•
684
680 nF
824
820 nF
105
1.0 μF
Notes
RoHS-compliant except when supplied with lead (Pb)-containing terminations, codes “Z” and “U”
Not RoHS-compliant
+ Use MIL-PRF-55681 (CDR) instead, part numbers removed from DSCC listing
BX
10
X
16
Y
25
Z
50
A
100
B
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+
+
+
+
+
•
•
•
•
•
+
+
+
•
•
DSCC PACKAGING QUANTITIES (1)
CASE CODE
TAPE SIZE
1206 (2)
8 mm
7" REEL QUANTITIES
PACKAGING CODE
“T”
“J”
3000/2500
1000
11 1/4" AND 13" REEL QUANTITIES
PACKAGING CODE
“R”
10 000/9000
BULK
VIAL PACKAGING CODE
“B”
100
Notes
(1) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
(2) Packaging quantities can depend from product thickness
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to +40 °C ambient temperature and  70 % relative humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 13-Aug-14
Document Number: 45049
221
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05001
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
High Frequency DSCC Qualified Type 05001
FEATURES
• US Defense Supply Center approved
• Federal stock control number,
CAGE CODE SHV71
Available
Available
• Case size 0805
• High frequency
• Excellent aging characteristics
• Tin/lead termination code “Z”
• Lead (Pb)-free terminations code “M”
• Surface mount, wet build process
• Reliable Noble Metal Electrode (NME) system
• Made with a combination of design, materials and tight
process control to achieve very high field reliability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATIONS
• Broadband wireless communication
• Satellite communication
• WiFi (802.11) and WiMax (802.16)
• VolP networks and cellular base stations
• Subscriber based wireless devices
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Aging Rate: 0 % maximum per decade
Capacitance Range: 1.0 pF to 100 pF
Insulation Resistance (IR):
At + 25 °C and rated voltage 100 000 M minimum or
1000 F, whichever is less
At + 125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less
Voltage Rating: 50 VDC to 250 VDC
Temperature Coefficient of Capacitance (TCC):
BP: 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C with
zero (0) VDC applied
Dissipation Factor (DF):
BP: 0.05 % max. at 1.0 VRMS and 1 MHz
Revision: 26-Mar-13
Dielectric Strength Test:
Performed per method 103 of EIA-198-2-E.
Applied test voltages
 250 VDC-rated: 200 % of rated voltage
Document Number: 45068
222
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05001
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE CODE
BP
CAPACITANCE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
250
1.0 pF
100 pF
0805
ORDERING INFORMATION
05001-
1R0
B
C
Z
-
C
DSCC
NUMBER
CAPACITANCE
NOMINAL CODE
DC VOLTAGE
RATING (1)
CAPACITANCE
TOLERANCE
TERMINATION
GROUP C
TESTING OPTION (2)
PACKAGING
0805
Case size
High
Frequency
Expressed in
picofarads (pF).
The first two digits
are significant, the
third is a multiplier.
An “R” indicates
a decimal point.
Examples:
1R0 = 1.0 pF
A = 50 V
B = 100 V
C = 200 V
K = 250 V
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Note:
B, C, D
 6.2 pF
B, C, J, K, M
6.8 pF to 9.1 pF
F, G, J, K, M
 10 pF
M = Silver palladium
Z = Ni barrier with
tin/lead plate
min. 4 % lead
C = Full group C
L = 2000 h life test only
M = 1000 h life test only
H = Low voltage humidity
test only
- = No group C testing
T = 7" reel/plastic tape
C = 7" reel/paper tape
O = 7" reel/flamed paper tape
J = 7" reel (low quantity)
R = 11 1/4"/13" reel/plastic tape
P = 11 1/4"/13" reel/paper tape
I = 11 1/4"/13" reel/flamed paper tape
B = Bulk
Note:
“I” and “O” is used for “M”
termination code
Notes
(1) DC voltage rating should not be exceeded in application
(2) Selecting one of the group C options with life testing may extend the delivery time
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
PART ORDERING
NUMBER
05001-
Revision: 26-Mar-13
TERMINATIONS PAD (P)
LENGTH
(L)
WIDTH
(W)
MAXIMUM THICKNESS
(T)
MINIMUM
MAXIMUM
0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20)
0.055
(1.40)
0.010
(0.25)
0.030
(0.76)
Document Number: 45068
223
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05001
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
BP
05001
0805
CAP.
1.0 pF
1.1 pF
1.2 pF
1.3 pF
1.4 pF
1.5 pF
1.6 pF
1.7 pF
1.8 pF
1.9 pF
2.0 pF
2.1 pF
2.2 pF
2.4 pF
2.7 pF
3.0 pF
3.3 pF
3.6 pF
3.9 pF
4.3 pF
4.7 pF
5.1 pF
5.6 pF
6.2 pF
6.8 pF
7.5 pF
8.2 pF
9.1 pF
10 pF
11 pF
12 pF
13 pF
15 pF
18 pF
20 pF
22 pF
24 pF
27 pF
30 pF
33 pF
36 pF
39 pF
43 pF
47 pF
51 pF
56 pF
62 pF
68 pF
75 pF
82 pF
91 pF
100 pF
50
A
100
B
200
C
250
K
TOLERANCE
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
•
•
•
•
•
•
B, C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “Z”
•• Paper carrier • Plastic carrier tape
Revision: 26-Mar-13
Document Number: 45068
224
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05001
www.vishay.com
DSCC PACKAGING QUANTITIES
CASE
CODE
TAPE
SIZE
0805
8 mm
Vishay Vitramon
(1)
11 1/4" AND 13" REEL QUANTITIES
BULK
PACKAGING CODE
“C”/“O”/“T”
7" REEL QUANTITIES
PACKAGING CODE
“J”
PACKAGING CODE
“P”/“I”/“R”
VIAL PACKAGING CODE
“B”
3000
1000
10 000
100
Note
(1) Reference: EIA Standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to + 40 °C ambient temperature and  70 % related humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 26-Mar-13
Document Number: 45068
225
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05002
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
High Frequency DSCC Qualified Type 05002
FEATURES
• US Defense Supply Center approved
• Federal stock control number,
CAGE CODE SHV71
Available
Available
• Case size 0603
• High frequency
• Excellent aging characteristics
• Tin/lead termination code “Z”
• Lead (Pb)-free terminations code “M”
• Surface mount, wet build process
• Reliable Noble Metal Electrode (NME) system
• Made with a combination of design, materials and tight
process control to achieve very high field reliability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATIONS
• Broadband wireless communication
• Satellite communication
• WiFi (802.11) and WiMax (802.16)
• VolP networks and cellular base stations
• Subscriber based wireless devices
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Aging Rate: 0 % maximum per decade
Capacitance Range: 1.0 pF to 100 pF
Insulation Resistance (IR):
Voltage Rating: 50 VDC to 250 VDC
At + 25 °C and rated voltage 100 000 M minimum or
1000 F, whichever is less
Temperature Coefficient of Capacitance (TCC):
BP: 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C with
zero (0) VDC applied
At + 125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less
Dielectric Strength Test:
Dissipation Factor (DF):
Performed per method 103 of EIA-198-2-E.
BP: 0.05 % max. at 1.0 VRMS and 1 MHz
Applied test voltages
 250 VDC-rated: 200 % of rated voltage
Revision: 27-Mar-13
Document Number: 45069
226
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05002
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE CODE
BP
CAPACITANCE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
250
1.0 pF
100 pF
0603
ORDERING INFORMATION
05002-
1R0
B
F
Z
-
C
(2)
DSCC
NUMBER
CAPACITANCE
NOMINAL CODE
DC VOLTAGE
RATING (1)
CAPACITANCE
TOLERANCE
TERMINATION
GROUP C
TESTING OPTION
0603
Case size
High
Frequency
Expressed in
picofarads (pF).
The first two digits
are significant, the
third is a multiplier.
An “R” indicates a
decimal point.
Examples:
1R0 = 1.0 pF
A = 50 V
B = 100 V
C = 200 V
K = 250 V
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Note:
B, C, D
 6.2 pF
B, C, J, K, M
6.8 pF to 9.1 pF
F, G, J, K, M
 10 pF
M = Silver palladium
Z = Ni barrier with
tin/lead plate
min. 4 % lead
C = Full group C
L = 2000 h life test only
M = 1000 h life test only
H = Low voltage
humidity test only
- = Group A test only
PACKAGING
C = 7" reel/paper tape
O = 7" reel/flamed paper tape
J = 7" reel (low quantity)
P = 11 1/4"/13" reel/paper tape
I = 11 1/4"/13" reel/flamed paper tape
B = Bulk
Note:
“I” and “O” is used for “M”
termination code
Notes
(1) DC voltage rating should not be exceeded in application
(2) Selecting one of the group C options with life testing may extend the delivery time
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
PART ORDERING
NUMBER
05002-
Revision: 27-Mar-13
TERMINATIONS PAD (P)
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS (T)
MINIMUM
MAXIMUM
0.063 ± 0.006
(1.60 ± 0.15)
0.032 ± 0.006
(0.81 ± 0.15)
0.036
(0.91)
0.008
(0.20)
0.020
(0.50)
Document Number: 45069
227
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05002
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
STYLE
CASE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
1R0
1R1
1R2
1R3
1R4
1R5
1R6
1R7
1R8
1R9
2R0
2R1
2R2
2R4
2R7
3R0
3R3
3R6
3R9
4R3
4R7
5R1
5R6
6R2
6R8
7R5
8R2
9R1
100
110
120
130
150
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
BP
05002
0603
CAP.
1.0 pF
1.1 pF
1.2 pF
1.3 pF
1.4 pF
1.5 pF
1.6 pF
1.7 pF
1.8 pF
1.9 pF
2.0 pF
2.1 pF
2.2 pF
2.4 pF
2.7 pF
3.0 pF
3.3 pF
3.6 pF
3.9 pF
4.3 pF
4.7 pF
5.1 pF
5.6 pF
6.2 pF
6.8 pF
7.5 pF
8.2 pF
9.1 pF
10 pF
11 pF
12 pF
13 pF
15 pF
18 pF
20 pF
22 pF
24 pF
27 pF
30 pF
33 pF
36 pF
39 pF
43 pF
47 pF
51 pF
56 pF
62 pF
68 pF
75 pF
82 pF
91 pF
100 pF
50
A
100
B
200
C
250
K
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
••
TOLERANCE
B, C
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, D
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “Z”
•• Paper carrier tape
Revision: 27-Mar-13
Document Number: 45069
228
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05002
www.vishay.com
DSCC PACKAGING QUANTITIES
CASE
CODE
TAPE
SIZE
0603
8 mm
Vishay Vitramon
(1)
11 1/4" AND 13" REEL QUANTITIES
BULK
PACKAGING CODE
“C”/”O”
7" REEL QUANTITIES
PACKAGING CODE
“J”
PACKAGING CODE
“P”/”I”
VIAL PACKAGING CODE
“B”
4000
1000
10 000
100
Note
(1) Reference: EIA Standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to + 40 °C ambient temperature and  70 % related humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 27-Mar-13
Document Number: 45069
229
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05003
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
High Frequency DSCC Qualified Type 05003
FEATURES
• US Defense Supply Center approved
• Federal stock control number,
CAGE CODE SHV71
Available
Available
• Case size 0402
• High frequency
• Excellent aging characteristics
• Tin/lead termination code “Z”
• Lead (Pb)-free terminations code “M”
• Surface mount, wet build process
• Reliable Noble Metal Electrode (NME) system
• Made with a combination of design, materials and tight
process control to achieve very high field reliability
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATIONS
• Broadband wireless communication
• Satellite communication
• WiFi (802.11) and WiMax (802.16)
• VolP networks and cellular base stations
• Subscriber based wireless devices
ELECTRICAL SPECIFICATIONS
Note
• Electrical characteristics at 25 °C unless otherwise specified
Operating Temperature: - 55 °C to + 125 °C
Aging Rate: 0 % maximum per decade
Capacitance Range: 1.0 pF to 27 pF
Insulation Resistance (IR):
Voltage Rating: 50 VDC to 100 VDC
At + 25 °C and rated voltage 100 000 M minimum or
1000 F, whichever is less
Temperature Coefficient of Capacitance (TCC):
BP: 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C with
zero (0) VDC applied
Dissipation Factor (DF):
BP: 0.05 % max. at 1.0 VRMS and 1 MHz
Revision: 27-Mar-13
At + 125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less
Dielectric Strength Test:
Performed per method 103 of EIA-198-2-E.
Applied test voltages
 250 VDC-rated: 200 % of rated voltage
Document Number: 45070
230
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05003
www.vishay.com
Vishay Vitramon
QUICK REFERENCE DATA
DIELECTRIC
CASE CODE
BP
CAPACITANCE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
100
1.0 pF
27 pF
0402
ORDERING INFORMATION
05003-
1R0
B
C
Z
-
C
(2)
DSCC
NUMBER
CAPACITANCE
NOMINAL CODE
DC VOLTAGE
RATING (1)
CAPACITANCE
TOLERANCE
TERMINATION
GROUP C
TESTING OPTION
0603
Case size
High
Frequency
Expressed in
picofarads (pF).
The first two digits
are significant, the
third is a multiplier.
An “R” indicates a
decimal point.
Examples:
1R0 = 1.0 pF
A = 50 V
B = 100 V
B = ± 0.1 pF
C = ± 0.25 pF
D = ± 0.50 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
Note:
B, C, D
 6.2 pF
B, C, J, K, M
6.8 pF to 9.1 pF
F, G, J, K, M
 10 pF
M = Silver palladium
Z = Ni barrier with
tin/lead plate
min. 4 % lead
C = Full group C
L = 2000 h life test only
M = 1000 h life test only
H = Low voltage humidity
test only
- = Group A test only
PACKAGING
C = 7" reel/paper tape
O = 7" reel/flamed paper tape
J = 7" reel (low quantity)
P = 11 1/4"/13" reel/paper tape
I = 11 1/4"/13" reel/flamed paper tape
B = Bulk
Note:
“I” and “O” is used for “M”
termination code
Notes
(1) DC voltage rating should not be exceeded in application
(2) Selecting one of the group C options with life testing may extend the delivery time
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
PART ORDERING
NUMBER
05003-
Revision: 27-Mar-13
TERMINATIONS PAD (P)
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS (T)
MINIMUM
MAXIMUM
0.040 ± 0.004
(1.00 ± 0.10)
0.020 ± 0.004
(0.50 ± 0.10)
0.024
(0.60)
0.004
(0.10)
0.016
(0.41)
Document Number: 45070
231
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05003
www.vishay.com
Vishay Vitramon
SELECTION CHART
DIELECTRIC
BP
STYLE
05003
CASE CODE
0402
VOLTAGE (VDC)
VOLTAGE CODE
50
100
A
B
TOLERANCE
CAP. CODE
CAP.
1R0
1.0 pF
••
••
B, C
1R1
1.1 pF
••
••
B, C, D
1R2
1.2 pF
••
••
B, C, D
1R3
1.3 pF
••
••
B, C, D
1R5
1.5 pF
••
••
B, C, D
1R6
1.6 pF
••
••
B, C, D
1R7
1.7 pF
••
••
B, C, D
1R8
1.8 pF
••
••
B, C, D
2R0
2.0 pF
••
••
B, C, D
2R1
2.1 pF
••
••
B, C, D
2R2
2.2 pF
••
••
B, C, D
2R4
2.4 pF
••
••
B, C, D
2R7
2.7 pF
••
••
B, C, D
3R0
3.0 pF
••
••
B, C, D
3R3
3.3 pF
••
••
B, C, D
3R6
3.6 pF
••
••
B, C, D
3R9
3.9 pF
••
••
B, C, D
4R3
4.3 pF
••
••
B, C, D
4R7
4.7 pF
••
••
B, C, D
5R1
5.1 pF
••
••
B, C, D
5R6
5.6 pF
••
••
B, C, D
6R2
6.2 pF
••
••
B, C, D
6R8
6.8 pF
••
••
B, C, J, K, M
7R5
7.5 pF
••
••
B, C, J, K, M
8R2
8.2 pF
••
••
B, C, J, K, M
9R1
9.1 pF
••
••
B, C, J, K, M
100
10 pF
••
••
F, G, J, K, M
110
11 pF
••
••
F, G, J, K, M
120
12 pF
••
••
F, G, J, K, M
130
13 pF
••
••
F, G, J, K, M
150
15 pF
••
••
F, G, J, K, M
180
18 pF
••
••
200
20 pF
••
F, G, J, K, M
220
22 pF
••
F, G, J, K, M
240
24 pF
••
F, G, J, K, M
270
27 pF
••
F, G, J, K, M
F, G, J, K, M
Notes
RoHS-compliant except when supplied with lead (Pb)-containing termination, code “Z”
•• Paper carrier tape
Revision: 27-Mar-13
Document Number: 45070
232
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DSCC 05003
www.vishay.com
Vishay Vitramon
DSCC PACKAGING QUANTITIES
(1)
7" REEL QUANTITIES
CASE
CODE
TAPE
SIZE
0402
8 mm
11 1/4" AND 13" REEL QUANTITIES
BULK
VIAL
PACKAGING CODE
“B”
100
PACKAGING CODE
“C”/”O”
PACKAGING CODE
“J”
PAPER TAPE
PACKAGING CODE
“P”/“I”
4000
1000
10 000
Note
(1) Reference: EIA Standard RS 481 - “Taping of Surface Mount Components for Automatic Placement”
STORAGE AND HANDLING CONDITIONS
(1) Store the components at 5 °C to + 40 °C ambient temperature and  70 % related humidity conditions.
(2) The product is recommended to be used within a time-frame of 2 years after shipment.
Check solderability in case extended shelf life beyond the expiry date is needed.
Precautions:
a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or
the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering.
b. Store products on the shelf and avoid exposure to moisture or dust.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 27-Mar-13
Document Number: 45070
233
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
VJ....W1BC
Basic Commodity Series ....... 235
VJ0201....W1BC
Ultra Small Series 0201 ......... 249
VJ06C4....W1BC Chip Array .. 254
MLCCs
for
Basic Commodity
Applications
(BME Technology)
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
Surface Mount Multilayer Ceramic Chip Capacitors
for Commodity Applications
FEATURES
•
•
•
•
•
•
•
Available from 0402 to 1210 body sizes
Ultra stable C0G (NP0) dielectric
High capacitance in X5R, X7R, Y5V
For high frequency applications
Ni-barrier with 100 % tin terminations
Dry sheet technology process
Noble Metal Electrode system (NME):
for certain C0G (NP0) values
• Base Metal Electrode system (BME):
for X5R, X7R, Y5V and certain C0G (NP0) values
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
•
•
•
•
Consumer electronics
Telecommunications
Data processing
Mobile applications
ELECTRICAL SPECIFICATIONS
Operating Temperature:
C0G (NP0): -55 °C to +125 °C
X5R: -55 °C to +85 °C
X7R: -55 °C to +125 °C
Y5V: -25 °C to +85 °C
Capacitance Range:
C0G (NP0): 0.5 pF to 39 nF
X5R: 47 nF to 100 μF
X7R: 100 pF to 47 μF
Y5V: 10 nF to 100 μF
Voltage Range:
C0G (NP0): 10 VDC to 100 VDC
X5R: 6.3 VDC to 50 VDC
X7R: 10 VDC to 100 VDC
Y5V: 6.3 VDC to 100 VDC
Temperature Coefficient of Capacitance (TCC):
C0G (NP0): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C
X5R: ± 15 % from -55 °C to +85 °C without voltage applied
X7R: ± 15 % from -55 °C to +125 °C without voltage applied
Y5V: + 30 % / - 80 % from -25 °C to +85 °C without voltage
applied
Insulation Resistance (IR) at UR:
 10 G or R x C  500  x F whichever is less
Test Conditions for Capacitance Tolerance:
preconditioning for X5R, X7R, Y5V MLCC: perform a heat
treatment at +150 °C ± 10 °C for 1 h, then leave in ambient
condition for 24 h ± 2 h before measurement
Revision: 31-Oct-14
Test Conditions for Capacitance and DF Measurement:
measured at conditions of 30 % to 70 % related humidity.
C0G (NP0): Apply 1.0 VRMS ± 0.2 VRMS, 1.0 MHz ± 10 % for
caps  1000 pF, at +25 °C ambient temperature
Apply 1.0 VRMS ± 0.2 VRMS, 1.0 kHz ± 10 % for
caps > 1000 pF, at +25 °C ambient temperature
X5R / X7R: Caps  10 μF apply 1.0 VRMS ± 0.2 VRMS,
1.0 kHz ± 10 %, at +25 °C ambient temperature (1)
Caps > 10 μF apply 0.5 VRMS ± 0.2 VRMS,
120 Hz ± 20 %, at +25 °C ambient temperature
Y5V:
Caps  10 μF apply 1.0 VRMS ± 0.2 VRMS,
1.0 kHz ± 10 %, at +20 °C ambient temperature
Caps > 10 μF apply 0.5 VRMS ± 0.2 VRMS,
120 Hz ± 20 %, at +20 °C ambient temperature
Note
(1) Test conditions: 0.5 V
RMS ± 0.2 VRMS, 1 kHz ± 10 %
X7R: 0603:  2.2 μF / 10 V
0805: 10 μF (6.3 V and 10 V)
X5R: 0402:  4.7 μF / 6.3 V and  2.2 μF / 10 V
0603: 10 μF / 6.3 V
Aging Rate:
C0G (NP0): 0 % per decade
X5R: 6.3 VDC / 10 VDC: 3 % maximum per decade
16 VDC / 25 VDC: 2 % maximum per decade
X7R:  10 VDC: 1.5 % maximum per decade
 16 VDC: 1 % maximum per decade
Y5V: 6.3 VDC: 12.5 % maximum per decade
10 VDC / 16 VDC: 9 % maximum per decade
 25 VDC: 7 % maximum per decade
Dielectric Strength Test:
this is the maximum voltage the capacitors are tested 1 s to
5 s period and the charge / discharge current does not
exceed 50 mA.
 100 VDC: 250 % of rated voltage
Document Number: 28548
235
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
Dissipation Factor (DF):
C0G (NP0): Cap. < 30 pF: Q  400 + 20C
Cap.  30 pF: Q  1000
X5R, X7R:
Y5V:
RATED
D.F. 
VOLTAGE
3%
 50 V
2.5 %
5%
10 %
5%
7%
25 V
3.5 %
10 %
5%
16 V
3.5 %
10 %
10 V
5%
10 %
15 %
6.3 V
10 %
RATED
VOLTAGE
EXCEPTION OF D.F. 
15 %
20 %
0603  0.047 μF; 0805  0.18 μF;
1206  0.47 μF
1210  4.7 μF
0603  1 μF; 0805  1 μF;
1206  2.2 μF; 1210  10 μF
0805  1 μF; 1210  10 μF
0603  0.33 μF; 1206  4.7 μF
0402  0.10 μF; 0603  0.47 μF;
0805  2.2 μF; 1206  6.8 μF;
1210  22 μF
0402  0.033 μF; 0603  0.15 μF;
0805  0.68 μF; 1206  2.2 μF;
1210  4.7 μF
0402  0.22 μF; 0603  0.68 μF;
0805  2.2 μF; 1206  4.7 μF;
1210  22 μF
0402  0.33 μF; 0603  0.33 μF;
0805  2.2 μF; 1206  2.2 μF;
1210  22 μF
0402  1 μF
0402  1 μF; 0603  10 μF;
0805  4.7 μF; 1206  47 μF;
1210  100 μF
0402  2.2 μF
 50 V
35 V
25 V
16 V
C < 1.0 μF
16 V
C  1.0 μF
10 V
6.3 V
D.F. 
EXCEPTION OF D.F. 
0603  0.1 μF; 0805  0.47 μF;
1206  4.7 μF
7%
0402  0.047 μF; 0603  0.1 μF;
7%
0805  0.33 μF; 1206  1 μF;
1210  4.7 μF
5%
0402  0.068 μF; 0603  0.47 μF;
9%
1206  4.7 μF; 1210  22 μF
9%
0402  0.068 μF; 0603  0.68 μF
7%
12.5 %
0402  0.22 μF
0603  2.2 μF; 0805  3.3 μF;
9 % 12.5 %
1206  10 μF; 1210  22 μF
12.5 % 20 %
0402  0.47 μF
20 %
5%
7%
QUICK REFERENCE DATA
DIELECTRIC
C0G (NP0)
X5R
X7R
Y5V
CASE
MAXIMUM VOLTAGE
(V)
0402
0603
0805
1206
0402
0603
0805
1206
1210
0402
0603
0805
1206
1210
0402
0603
0805
1206
1210
100
100
100
100
25
25
25
25
16
50
100
100
100
100
50
50
100
100
100
CAPACITANCE
MINIMUM
0.5 pF
0.5 pF
0.5 pF
1.5 pF
47 nF
220 nF
1.5 μF
1.5 μF
1.5 μF
100 pF
100 pF
100 pF
150 pF
1.0 nF
10 nF
10 nF
10 nF
10 nF
10 nF
MAXIMUM
1.0 nF
3.3 nF
12 nF
39 nF
10 μF
22 μF
47 μF
100 μF
100 μF
220 nF
2.2 μF
10 μF
22 μF
47 μF
1.0 μF
4.7 μF
10 μF
22 μF
100 μF
Note
• Detail ratings see “Selection Chart”
Revision: 31-Oct-14
Document Number: 28548
236
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
ORDERING INFORMATION
VJ0402
Y
101
J
X
Q
C
W1BC
SIZE
CODE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
VOLTAGE (1)
PACKAGING
PROCESS CODE
FOR BASIC
COMMODITY
0402
0603
0805
1206
1210
A = C0G
(NP0)
G = X5R
Y = X7R
V = Y5V
Two significant
digits followed
by the number
of zeros:
1R0 = 1.0 pF
101 = 100 pF
102 = 1000 pF
152 = 1500 pF
103 = 10 000 pF
104 = 100 000 pF
C0G (NP0)
Cap. < 10 pF:
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.50 pF
X = Ni barrier
100 % matte tin
S=4V
Y = 6.3 V
Q = 10 V
J = 16 V
X = 25 V
Z = 35 V
A = 50 V
B = 100 V
C = 7" reel /
paper tape
P = 13" reel /
paper tape
T = 7" reel /
plastic tape
R = 13" reel /
plastic tape
Cap.  10 pF:
F=±1%
G=±2%
J=±5%
K = ± 10 %
X5R / X7R
J = ± 5 % (2)(3)
K = ± 10 %
M = ± 20 %
Y5V
M = ± 20 %
Z = - 20 % /
+ 80 %
Notes
• Detail rating see “Selection Chart”
(1)
DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: [email protected]
(2)
Not all values, see selection chart X7R size 0603, 0805 and 1206
(3)
No 5 % tolerance for X5R
Revision: 31-Oct-14
Document Number: 28548
237
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
DIMENSIONS in inches (millimeters)
W
T
MB
MB
L
SIZE
CODE
0402
(1005)
0603
(1608)
0805
(2012)
1206
(3216)
1210
(3225)
THICKNESS
SYMBOL
SOLDERING
METHOD (1)
L
W
T
N
R
0.040 ± 0.002
(1.00 ± 0.05)
0.020 ± 0.002
(0.50 ± 0.05)
0.020 ± 0.002
(0.50 ± 0.05)
E
R
0.040 ± 0.008
(1.00 ± 0.20)
0.020 ± 0.008
(0.50 ± 0.20)
0.020 ± 0.008
(0.50 ± 0.20)
S
R/W
0.063 ± 0.004
(1.60 ± 0.10)
0.030 ± 0.004
(0.80 ± 0.10)
0.030 ± 0.0028
(0.80 ± 0.07)
X
R/W
0.063 + 0.006 / - 0.004
(1.60 + 0.15 / - 0.10)
0.030 + 0.006 / - 0.004
(0.800.15 / - 0.10)
0.030 + 0.006 / - 0.004
(0.80 + 0.15 / - 0.10)
X'
R/W
0.063 ± 0.008
(1.60 ± 0.20)
0.030 ± 0.008
(0.80 ± 0.20)
0.030 ± 0.008
(0.80 ± 0.20)
A
R/W
B
R/W
D
R
I
R
B
R/W
C
R
D
R
J
R
G
R
P
R
C
R
D
R
G
R
K
R
M
R
MB
0.010 + 0.002 / - 0.004
(0.25 + 0.05 / - 0.10)
0.016 ± 0.006
(0.40 ± 0.15)
0.024 ± 0.004
(0.60 ± 0.10)
0.080 ± 0.006
(2.00 ± 0.15)
0.050 ± 0.004
(1.25 ± 0.10)
0.030 ± 0.004
(0.80 ± 0.10)
0.049 ± 0.004
(1.25 ± 0.10)
0.080 ± 0.008
(2.00 ± 0.20)
0.050 ± 0.008
(1.25 ± 0.20)
0.020 ± 0.008
(0.50 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20)
0.030 ± 0.004
(0.80 ± 0.10)
0.126 ± 0.006
(3.20 ± 0.15)
0.063 ± 0.006
(1.60 ± 0.15)
0.037 ± 0.004
(0.95 ± 0.10)
0.049 ± 0.004
(1.25 ± 0.10)
0.045 ± 0.006
(1.15 ± 0.15)
0.126 ± 0.008
(3.20 ± 0.20)
0.063 ± 0.008
(1.60 ± 0.20)
0.063 ± 0.008
(1.60 ± 0.20)
0.126 + 0.012 / - 0.004
(3.20 + 0.30 / - 0.10)
0.063 + 0.012 / - 0.004
(1.60 + 0.30 / - 0.10)
0.063 + 0.012 / - 0.004
(1.60 + 0.30 / - 0.10)
0.126 ± 0.012
(3.20 ± 0.30)
0.098 ± 0.008
(2.50 ± 0.20)
0.037 ± 0.004
(0.95 ± 0.10)
0.049 ± 0.004
(1.25 ± 0.10)
0.063 ± 0.008
(1.60 ± 0.20)
0.126 ± 0.016
(3.20 ± 0.40)
0.098 ± 0.012
(2.50 ± 0.30)
0.024 ± 0.008
(0.60 ± 0.20)
0.060 ± 0.010
(0.75 ± 0.25)
0.078 ± 0.008
(2.00 ± 0.20)
0.098 ± 0.012
(2.50 ± 0.30)
Note
(1) “R” = Reflow soldering process; “W” = Wave soldering process
Revision: 31-Oct-14
Document Number: 28548
238
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
SELECTION CHART
DIELECTRIC
C0G (NP0)
STYLE
SIZE CODE
VJ0402
VJ0603
VJ0805
VJ1206
0402
0603
0805
1206
VOLTAGE (VDC)
10
16
25
50
100
10
16
25
50
100
10
16
25
50
100
10
16
25
50
100
VOLTAGE CODE
Q
J
X
A
B
Q
J
X
A
B
Q
J
X
A
B
Q
J
X
A
B
CAP. CODE
CAP.
0R5
0.5 pF
N (1) N (1) N (1) N (1) N (1)
S
S
S
S
S
A
A
A
A
A
1R0
1.0 pF
N (1) N (1) N (1) N (1) N (1)
S
S
S
S
S
A
A
A
A
A
(1)
S
S
S
S
S
A
A
A
A
A
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
(1)
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
(1)
(1)
N
(1)
N
(1)
N
(1)
N
1R2
1.2 pF
N
1R5
1.5 pF
N (1) N (1) N (1) N (1) N (1)
(1)
N
(1)
N
(1)
N
(1)
N
1R8
1.8 pF
N
2R2
2.2 pF
N (1) N (1) N (1) N (1) N (1)
(1)
(1)
(1)
(1)
2R7
2.7 pF
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
3R3
3.3 pF
N (1) N (1) N (1) N (1) N (1)
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
3R9
3.9 pF
N (1) N (1) N (1) N (1) N (1)
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
(1)
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
(1)
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
(1)
N
(1)
N
(1)
N
(1)
N
4R7
4.7 pF
N
5R6
5.6 pF
N (1) N (1) N (1) N (1) N (1)
(1)
N
N
(1)
N
N
(1)
N
N
(1)
N
N
6R8
6.8 pF
N
8R2
8.2 pF
N (1) N (1) N (1) N (1) N (1)
100
10 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
120
12 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
150
15 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
180
18 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
220
22 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
270
27 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
330
33 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
390
39 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
470
47 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
560
56 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
680
68 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
820
82 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
101
100 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
121
120 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
151
150 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
181
180 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
221
220 pF
N
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
271
270 pF
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
331
330 pF
N
N
N
N
S
S
S
S
S
A
A
A
A
A
B
B
B
B
B
391
390 pF
N
N
N
N
S
S
S
S
S
B
B
B
B
B
B
B
B
B
B
471
470 pF
N
N
N
N
S
S
S
S
S
B
B
B
B
B
B
B
B
B
B
561
560 pF
N
N
N
N
S
S
S
S
S
B
B
B
B
B
B
B
B
B
B
681
680 pF
N
N
N
N
S
S
S
S
S
B
B
B
B
B
B
B
B
B
B
821
820 pF
N
N
N
N
S
S
S
S
S
B
B
B
B
B
B
B
B
B
B
Notes
• Letters indicate product thickness, see packaging quantities
(1) Indicate product with Ag/Ni/Sn termination
Revision: 31-Oct-14
Document Number: 28548
239
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
SELECTION CHART
DIELECTRIC
C0G (NP0)
STYLE
VJ0402
SIZE CODE
VJ0603
0402
VJ0805
0603
VJ1206
0805
1206
VOLTAGE (VDC)
10
16
25
50
100
10
16
25
50
100
10
16
25
50
100
10
16
25
50
100
VOLTAGE CODE
Q
J
X
A
B
Q
J
X
A
B
Q
J
X
A
B
Q
J
X
A
B
N
N
N
N
S
CAP. CODE
CAP.
102
1.0 nF
S
S
S
S
B
B
B
B
B
B
B
B
B
B
122
1.2 nF
X
X
X
X
B
B
B
B
B
B
B
B
B
B
152
1.5 nF
X
X
X
X
B
B
B
B
B
B
B
B
B
B
182
1.8 nF
X
X
X
X
B
B
B
B
B
B
B
B
B
B
222
2.2 nF
X
X
X
X
B
B
B
B
B
B
B
B
B
B
272
2.7 nF
X
X
X
X
D
D
D
D
D
B
B
B
B
B
332
3.3 nF
X
X
X
X
D
D
D
D
D
B
B
B
B
B
392
3.9 nF
D
D
D
D
D
B
B
B
B
B
472
4.7 nF
D
D
D
D
D
B
B
B
B
B
562
5.6 nF
D
D
D
D
B
B
B
B
B
682
6.8 nF
D
D
D
D
C
C
C
C
C
822
8.2 nF
D
D
D
D
D
D
D
D
D
103
10 nF
D
D
D
D
D
D
D
D
D
123
12 nF
153
15 nF
D (1) D (1)
183
18 nF
D (1) D (1)
223
22 nF
D (1) D (1)
273
27 nF
D (1) D (1)
333
33 nF
D (1) D (1)
393
39 nF
G (1) G (1)
473
47 nF
563
56 nF
683
68 nF
823
82 nF
104
100 nF
D (1) D (1)
D (1) D (1)
Notes
• Letters indicate product thickness, see packaging quantities
(1) Indicate product with Ag/Ni/Sn termination
Revision: 31-Oct-14
Document Number: 28548
240
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
SELECTION CHART
DIELECTRIC
STYLE
SIZE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
473
47 nF
563
56 nF
683
68 nF
823
82 nF
104
100 nF
124
120 nF
154
150 nF
184
180 nF
224
220 nF
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
155
1.5 μF
225
2.2 μF
335
3.3 μF
475
4.7 μF
106
10 μF
226
22 μF
476
47 μF
686
68 μF
107
100 μF
6.3 V
Y
VJ0402
0402
10 V 16 V 25 V
Q
J
X
50 V
A
6.3 V
Y
X5R
VJ0603
0603
10 V 16 V 25 V
Q
J
X
50 V
A
VJ0805
0805
10 V 16 V 25 V
Q
J
X
6.3 V
Y
50 V
A
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
X
X
X
X
N
E
E
X
X'
X' (1)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
I
I
I
I
I
I
I
I
I
I
I (1)
I (1)
I (1)
I
I
I
I
I
I
I
I
I
Notes
• Letters indicate product thickness, see packaging quantities
(1) Not in 10 % (code “K”) tolerance
SELECTION CHART
DIELECTRIC
STYLE
SIZE CODE
VOLTAGE (VDC)
VOLTAGE CODE
CAP. CODE
CAP.
105
1.0 μF
155
1.5 μF
225
2.2 μF
335
3.3 μF
475
4.7 μF
685
6.8 μF
106
10 μF
226
22 μF
476
47 μF
107
100 μF
X5R
6.3 V
Y
P
P
P
P
P (1)
P (1)
10 V
Q
J
J
P
P
P
P
P
P (1)
VJ1206
1206
16 V
J
25 V
X
J
J
P
P
P
P
P
P
P
50 V
A
6.3 V
Y
P (1)
P
M
M
M (1)
10 V
Q
VJ1210
1210
16 V
J
K
K
K
K
K
K
K
K
M
M
M (1)
K
M
M
K
M
25 V
X
50 V
A
M
Notes
• Letters indicate product thickness, see packaging quantities
(1) Not in 10 % (code “K”) tolerance
Revision: 31-Oct-14
Document Number: 28548
241
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
SELECTION CHART
DIELECTRIC
STYLE
VJ0402
SIZE CODE
0402
10 V 16 V 25 V 50 V 100 V
VOLTAGE (VDC)
VOLTAGE CODE
Q
J
X
A
B
CAP. CODE
CAP.
101
100 pF
N
N
N
N
121
120 pF
N
N
N
N
151
150 pF
N
N
N
N
181
180 pF
N
N
N
N
221
220 pF
N
N
N
N
271
270 pF
N
N
N
N
331
330 pF
N
N
N
N
391
390 pF
N
N
N
N
471
470 pF
N
N
N
N
561
560 pF
N
N
N
N
681
680 pF
N
N
N
N
821
820 pF
N
N
N
N
102
1.0 nF
N
N
N
N
122
1.2 nF
N
N
N
N
152
1.5 nF
N
N
N
N
182
1.8 nF
N
N
N
N
222
2.2 nF
N
N
N
N
272
2.7 nF
N
N
N
N
332
3.3 nF
N
N
N
N
392
3.9 nF
N
N
N
N
472
4.7 nF
N
N
N
N
562
5.6 nF
N
N
N
N
682
6.8 nF
N
N
N
N
822
8.2 nF
N
N
N
N
103
10 nF
N
N
N
N
123
12 nF
N
N
N
153
15 nF
N
N
N
183
18 nF
N
N
N
223
22 nF
N
N
N
273
27 nF
N
N
N
333
33 nF
N
N
N
393
39 nF
N
N
N
473
47 nF
N
N
N
563
56 nF
N
N
683
68 nF
N
N
823
82 nF
N
N
104
100 nF
N
N
N
124
120 nF
154
150 nF
184
180 nF
N
224
220 nF
N (2)
274
270 nF
334
330 nF
394
390 nF
474
470 nF
564
560 nF
684
680 nF
824
820 nF
105
1.0 μF
155
1.5 μF
225
2.2 μF
335
3.3 μF
475
4.7 μF
685
6.8 μF
106
10 μF
156
15 μF
226
22 μF
336
33 μF
476
47 μF
686
68 μF
Notes
• Letters indicate product thickness, see packaging quantities
(1) Not in 5 % (code “J”) tolerance
(2) Only in 10 % (code “K”) tolerance
Revision: 31-Oct-14
10 V
Q
X7R
VJ0603
0603
16 V 25 V 50 V
J
X
A
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
X
X
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
X
X
X (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
X
X
X (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
X
X
X
X
X
X
X
100 V
B
10 V
Q
VJ0805
0805
16 V 25 V 50 V
J
X
A
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S (1)
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
S
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
D
D
D
D
D
D
D
D
D
D
D
I
I
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
D
D
D
D
D
D
D
D
D
D
D
I (1)
I
I (1)
I (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
D
D
D
D
D
D
D
D
D
D
D
I (1)
I
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B/D
D
D
D
D
100 V
B
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
D
D
D
D
D
D
D
D
I
I
I (1)
I (1)
Document Number: 28548
242
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
SELECTION CHART
DIELECTRIC
STYLE
VJ1206
SIZE CODE
1206
VOLTAGE (VDC)
10 V
16 V
25 V
VOLTAGE CODE
Q
J
X
CAP. CODE
CAP.
101
100 pF
121
120 pF
151
150 pF
B (1)
B (1)
B (1)
181
180 pF
B (1)
B (1)
B (1)
221
220 pF
B (1)
B (1)
B (1)
271
270 pF
B (1)
B (1)
B (1)
331
330 pF
B (1)
B (1)
B (1)
391
390 pF
B (1)
B (1)
B (1)
471
470 pF
B
B
B
561
560 pF
B
B
B
681
680 pF
B
B
B
821
820 pF
B
B
B
102
1.0 nF
B
B
B
122
1.2 nF
B
B
B
152
1.5 nF
B
B
B
182
1.8 nF
B
B
B
222
2.2 nF
B
B
B
272
2.7 nF
B
B
B
332
3.3 nF
B
B
B
392
3.9 nF
B
B
B
472
4.7 nF
B
B
B
562
5.6 nF
B
B
B
682
6.8 nF
B
B
B
822
8.2 nF
B
B
B
103
10 nF
B
B
B
123
12 nF
B
B
B
153
15 nF
B
B
B
183
18 nF
B
B
B
223
22 nF
B
B
B
273
27 nF
B
B
B
333
33 nF
B
B
B
393
39 nF
B
B
B
473
47 nF
B
B
B
563
56 nF
B
B
B
683
68 nF
B
B
B
823
82 nF
B
B
B
104
100 nF
B
B
B
124
120 nF
B
B
B
154
150 nF
C
C
C
184
180 nF
C
C
C
224
220 nF
C
C
C
274
270 nF
C
C
C
334
330 nF
C
C
C
394
390 nF
C
C
J
474
470 nF
J
J
J
564
560 nF
J
J
J
684
680 nF
J
J
J
824
820 nF
J
J
J
105
1.0 μF
J
J
J
155
1.5 μF
J
J
P
225
2.2 μF
J
J
P
335
3.3 μF
P
P
P
475
4.7 μF
P
P
P
685
6.8 μF
106
10 μF
P
P (1)
P (1)
156
15 μF
226
22 μF
P (1)
336
33 μF
476
47 μF
686
68 μF
107
100 μF
Notes
• Letters indicate product thickness, see packaging quantities
(1) Not in 5 % (code “J”) tolerance
(2) Only in 20 % (code “M”) tolerance
Revision: 31-Oct-14
X7R
50 V
A
100 V
B
10 V
Q
16 V
J
VJ1210
1210
25 V
X
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
C
C
D
D
P
P
P
P
P
P
B (1)
B (1)
B (1)
B (1)
B (1)
B (1)
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
D
D
D
G
G
G
G
G
G
G
P
P
P
P
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
D
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
D
D
D
D
K
M (1)
M (1)
P (1)
P (1)
K
K
G
G (1)
K (1)
K
K
K (1)
M (2)
M (2)
50 V
A
100 V
B
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
G
G
M
M
M
K
K
K
M
M
M (1)
Document Number: 28548
243
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
SELECTION CHART
DIELECTRIC
Y5V
STYLE
VJ0402
VJ0603
VJ0805
0402
0603
0805
SIZE CODE
VOLTAGE (VDC)
6.3 V 10 V 16 V 25 V 50 V 100 V
VOLTAGE CODE
Y
Q
J
X
A
B
10 V 16 V
25 V
50 V 100 V 10 V 16 V 25 V 50 V
Q
J
X
A
B
J
X
A
B
B
CAP. CODE
CAP.
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
N
N
N
N
S
S
S
S
A
A
A
A
123
12 nF
N
N
N
N
S
S
S
S
A
A
A
A
153
15 nF
N
N
N
N
S
S
S
S
A
A
A
A
183
18 nF
N
N
N
N
S
S
S
S
A
A
A
A
223
22 nF
N
N
N
N
S
S
S
S
A
A
A
A
273
27 nF
N
N
N
N
S
S
S
S
A
A
A
A
333
33 nF
N
N
N
N
S
S
S
S
A
A
A
A
393
39 nF
N
N
N
S
S
S
S
A
A
A
A
473
47 nF
N
N
N
S
S
S
S
A
A
A
A
563
56 nF
N
N
N (1)
S
S
S
S
A
A
A
A
683
68 nF
N
N
N
S
S
S
S
A
A
A
A
823
82 nF
N
N
S
S
S
S
A
A
A
A
104
100 nF
N
N
S
S
S
S
A
A
A
A
154
150 nF
N
S
S
S
S
A
A
A
A
224
220 nF
N
N
S
S
S
S
334
330 nF
N
N
S
S
S
474
470 nF
N
N
S
S
X
684
680 nF
N
S
X
105
1.0 μF
N
S
X
155
1.5 μF
S
225
2.2 μF
S
335
3.3 μF
475
4.7 μF
685
6.8 μF
I
106
10 μF
I
226
22 μF
336
33 μF
476
47 μF
686
68 μF
107
100 μF
N
N
X
X
X
S
100 V
Q
A
A
A
A
B
B
B
B
B
B
B
B
B
B
D
D
B
B
D
D
D
D
D
D
D
D
D
D
B
B
B
B
B
B
I
I
I
Notes
• Letters indicate product thickness, please see packaging quantities
(1) Not in 20 % (code “M”) tolerance
Revision: 31-Oct-14
Document Number: 28548
244
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
SELECTION CHART
DIELECTRIC
Y5V
STYLE
VJ1206
SIZE CODE
VJ1210
1206
1210
VOLTAGE (VDC)
10 V
16 V
25 V
35 V
50 V
100 V
6.3 V
10 V
16 V
25 V
35 V
50 V
100 V
VOLTAGE CODE
Q
J
X
Z
A
B
Y
Q
J
X
Z
A
B
B
C
B
C
B
C
B
C
B
C
B
C
CAP. CODE
CAP.
102
1.0 nF
122
1.2 nF
152
1.5 nF
182
1.8 nF
222
2.2 nF
272
2.7 nF
332
3.3 nF
392
3.9 nF
472
4.7 nF
562
5.6 nF
682
6.8 nF
822
8.2 nF
103
10 nF
B
B
B
B
123
12 nF
B
B
B
B
153
15 nF
B
B
B
B
183
18 nF
B
B
B
B
223
22 nF
B
B
B
B
273
27 nF
B
B
B
B
333
33 nF
B
B
B
B
393
39 nF
B
B
B
B
473
47 nF
B
B
B
B
563
56 nF
B
B
B
B
683
68 nF
B
B
B
B
823
82 nF
B
B
B
B
104
100 nF
B
B
B
B
B
C
C
C
C
C
154
150 nF
B
B
B
B
C
C
C
C
C
C
224
220 nF
B
B
B
B
C
C
C
C
C
C
334
330 nF
B
B
B
B
C
C
C
C
C
474
470 nF
B
B
B
B
C
C
C
C
684
680 nF
B
B
B
B
C
C
C
C
105
1.0 μF
C
C
C
C
C
C
C
C
155
1.5 μF
C
C
C
C
C
C
225
2.2 μF
C
C
C
J (1)
C
C
C
335
3.3 μF
J
J
J
C
C
C
475
4.7 μF
J
J
J
C
C
D
685
6.8 μF
J
J
C
C
D
106
10 μF
J
J
D
D
G
226
22 μF
P
K
K
336
33 μF
476
47 μF
686
68 μF
J
P
P
107
100 μF
Notes
• Letters indicate product thickness, please see packaging quantities
(1) Not in 20 % (code “M”) tolerance
Revision: 31-Oct-14
K
G
G
K
K
M
Document Number: 28548
245
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
PACKAGING QUANTITIES
SIZE CODE
(inch / mm)
PAPER TAPE
PLASTIC TAPE
MAX. THICKNESS
(mm)
THICKNESS
SYMBOL
7" REEL (C)
13" REEL (P)
0.55
N
10K
50K
0.70
E
10K
0.87
S
4K
15K
0.95
X
4K
15K
1.00
X'
4K
15K
0.75
A
4K
15K
0.95
B
4K
15K
1.40
7" REEL (T)
13" REEL (R)
D
3K
10K
1.45
I
3K
10K
0.95
B
1.05
C
3K
10K
1.30
J
3K
10K
1.35
D
3K
10K
1.80
G
2K
1.90
P
2K
1.05
C
3K
10K
1.35
D
3K
10K
1.80
G
2K
2.20
K
1K
2.80
M
1K
0402 (1002)
0603 (1608)
0805 (2012)
4K
15K
1206 (3216)
1210 (3225)
Revision: 31-Oct-14
Document Number: 28548
246
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
TAPE AND REEL SPECIFICATION
P0
E
A0
P2
P0
T
T
E
D0
F
P2
W
F
B0
D0
W
5°
B0
P1
5°
P1
D1
A0
K0
Dimensions of paper tape
Dimensions of plastic tape
DIMENSIONS PAPER TAPE in millimeters
SIZE CODE
0402
0603
0805
1206
THICKNESS
N
E
S, X, X'
A
B
B
A0
0.62 ± 0.05
0.70 ± 0.10
1.02 ± 0.05
1.50 ± 0.10
1.50 ± 0.10
2.00 ± 0.10
B0
1.12 ± 0.05
1.20 ± 0.10
1.80 ± 0.05
2.30 ± 0.10
2.30 ± 0.10
3.50 ± 0.10
T
0.60 ± 0.05
0.70 ± 0.10
0.95 ± 0.05
0.75 ± 0.05
0.95 ± 0.05
0.95 ± 0.05
K0
-
-
-
-
-
-
W
8.00 ± 0.10
8.00 ± 0.10
8.00 ± 0.10
8.00 ± 0.10
8.00 ± 0.10
8.00 ± 0.10
4.00 ± 0.10
P0
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
10 x P0
40.0 ± 0.10
40.0 ± 0.10
40.0 ± 0.10
40.0 ± 0.10
40.0 ± 0.10
40.0 ± 0.10
P1
2.00 ± 0.05
2.00 ± 0.05
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
P2
2.00 ± 0.05
2.00 ± 0.05
2.00 ± 0.05
2.00 ± 0.05
2.00 ± 0.05
2.00 ± 0.05
D0
1.55 ± 0.05
1.55 ± 0.05
1.55 ± 0.05
1.55 ± 0.05
1.55 ± 0.05
1.50 ± 0.05
D1
-
-
-
-
-
-
E
1.75 ± 0.05
1.75 ± 0.05
1.75 ± 0.05
1.75 ± 0.05
1.75 ± 0.05
1.75 ± 0.10
F
3.50 ± 0.05
3.50 ± 0.05
3.50 ± 0.05
3.50 ± 0.05
3.50 ± 0.05
3.50 ± 0.05
DIMENSIONS PLASTIC TAPE in millimeters
SIZE CODE
0805
THICKNESS
D, I
C, J, D
1206
G, P
C, D
1210
G, K
M
A0
< 1.57
< 1.85
< 1.95
< 2.97
< 2.97
< 2.97
B0
< 2.40
< 3.46
< 3.67
< 3.73
< 3.73
< 3.73
T
0.23 ± 0.05
0.23 ± 0.05
0.23 ± 0.05
0.23 ± 0.05
0.23 ± 0.05
0.23 ± 0.05
K0
< 2.50
< 2.50
< 2.50
< 2.50
< 2.50
< 3.00
W
8.00 ± 0.10
8.00 ± 0.10
8.00 ± 0.10
8.00 ± 0.10
8.00 ± 0.10
8.00 ± 0.10
P0
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
10 x P0
40.0 ± 0.10
40.0 ± 0.10
40.0 ± 0.10
40.0 ± 0.10
40.0 ± 0.10
40.0 ± 0.10
P1
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
4.00 ± 0.10
P2
2.00 ± 0.05
2.00 ± 0.05
2.00 ± 0.05
2.00 ± 0.05
2.00 ± 0.05
2.00 ± 0.05
D0
1.50 ± 0.05
1.50 ± 0.05
1.50 ± 0.05
1.50 ± 0.05
1.50 ± 0.05
1.50 ± 0.05
D1
1.00 ± 0.10
1.00 ± 0.10
1.00 ± 0.10
1.00 ± 0.10
1.00 ± 0.10
1.00 ± 0.10
E
1.75 ± 0.10
1.75 ± 0.10
1.75 ± 0.10
1.75 ± 0.10
1.75 ± 0.10
1.75 ± 0.10
F
3.50 ± 0.05
3.50 ± 0.05
3.50 ± 0.05
3.50 ± 0.05
3.50 ± 0.05
3.50 ± 0.05
Revision: 31-Oct-14
Document Number: 28548
247
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Basic Commodity Series
www.vishay.com
Vishay
REEL SPECIFICATION
REEL DIMENSIONS in millimeters
D C
A
SYMBOL
7" REEL
13" REEL
A
13.0 ± 0.5
13.0 ± 0.5
B
9.0 ± 1.0
9.0 ± 1.0
C
178.0 ± 1.0
330.0 ± 1.0
D
60.0 ± 1.0
100.0 ± 1.0
B
CONSTRUCTION
NO.
C0G (NP0) (1)
NAME
1
Ceramic material
2
Inner electrode
3
Inner layer
4
Termination
5
C0G (NP0) / X5R / X7R / Y5V
BaTiO3 based
AgPd alloy
Ni
Ag
Cu
Middle layer
Ni
Outer layer
Sn (matt)
Note
(1) C0G (NP0) items are with Ag/Ni/Sn terminations, please see selection chart
3
4
5
1
2
STORAGE AND HANDLING CONDITIONS
(1) To store products at 5 °C to 40 °C ambient temperature and 20 % to 70 % relative humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed.
Cautions:
a.Do not store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which
easily be resulted in poor soldering.
b.To store products on the shelf and avoid exposure to moisture.
c.Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 31-Oct-14
Document Number: 28548
248
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Ultra Small Series 0201
www.vishay.com
Vishay
Surface Mount Multilayer Ceramic Chip Capacitors
for Ultra Small Commodity Applications
FEATURES
• High capacitance in unit size
• High precision dimensional tolerances
• Suitably used in high-accuracy automatic
mounting machine
• Dry sheet manufacturing technology
• Base Metal Electrode system (BME)
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
• Miniature microwave module
• Portable equipment - mobile phone, PDA
ELECTRICAL SPECIFICATIONS
Size
0201
Dielectric
C0G (NP0)
X7R
X5R
0.5 pF to 120 pF
100 pF to 10 nF
100 pF to 1 μF
Cap.  5 pF: B (± 0.1 pF), C (± 0.25 pF)
5 pF < Cap. < 10 pF: C (± 0.25 pF), D (± 0.5 pF)
Cap.  10 pF: F (± 1 %), G (2 %), J (5 %),
K (± 10 %)
J (± 5 %)
K (± 10 %)
M (± 20 %)
J (± 5 %)
K (± 10 %)
M (± 20 %)
16 V, 25 V, 50 V
10 V, 16 V, 25 V, 50 V
6.3 V, 10 V, 16 V, 25 V, 50 V
Capacitance
Capacitance Tolerance (2)
Rated Voltage (VDC)
tan /Q (1)
Cap. < 30 pF, Q  400 + 20 C
Cap.  30 pF, Q  1000
See Table 1
 10 G
 10 G or R x C  500 F, whichever is less
Insulation Resistance at UR
Operating Temperature
-55 °C to +125 °C
Capacitance Change
-55 % to +85 °C
± 30 ppm
Termination
± 15 %
Ni/Sn lead (Pb)-free termination
Notes
• Measured at 30 % to 70 % relative humidity
• NP0: apply 1.0 VRMS ± 0.2 VRMS, 1.0 MHz ± 10 % at the condition of 25 °C ambient temperature
• X7R, X5R: apply 1.0 VRMS ± 0.2 VRMS, 1.0 kHz ± 10 % (0201 / 6.3 V, cap.  224: 0.5 VRMS ± 0.2 VRMS, 1.0 kHz ± 10 %) at the condition of
25 °C ambient temperature
• Preconditioning for X7R / X5R MLCC: perform a heat treatment at 150 °C ± 10 °C for 1 h, then leave in ambient condition for 24 h ± 2 h
before measurement.
Table 1
X7R / X5R:
RATED VOLTAGE
D.F. 
EXCEPTION OF D.F. 
 50 V
3%
-
-
25 V
3.5 %
5%
0201  0.01 μF
16 V
3.5 %
10 V
5%
6.3 V
10 %
Revision: 09-Oct-14
5%
0201  0.01 μF
10 %
0201  0.012 μF
15 %
0201  0.1 μF
15 %
0201  0.1 μF
Document Number: 28538
249
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Ultra Small Series 0201
www.vishay.com
Vishay
QUICK REFERENCE DATA
DIELECTRIC
CASE
CAPACITANCE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
C0G (NP0)
0201
50
0.5 pF
120 pF
X5R
0201
50
100 pF
1 μF
X7R
0201
50
100 pF
10 nF
Note
• Detail ratings see “Selection Chart” table
ORDERING INFORMATION
VJ0201
A
100
J
SIZE
CODE
DIELECTRIC
CAPACITANCE
0201
A = C0G (NP0)
G = X5R
Y = X7R
Two significant
digits followed
by the number
of zeros.
R is in place of
decimal point:
0R5 = 0.5 pF
1R0 = 1.0 pF
100 = 10 pF
TOLERANCE
(1)
B = ± 0.10 pF
C = ± 0.25 pF
D = ± 0.5 pF
F=±1%
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
X
X
C
W1BC
TERMINATION
RATED
VOLTAGE
PACKAGING
PROCESS CODE
FOR BASIC COMMODITY
X = Ni barrier
100 % matte tin
Y = 6.3 V
Q = 10 V
J = 16 V
X = 25 V
A = 50 V
C = 7" reel /
paper tape
Note
(1) Detail tolerance see under “Electrical Specifications” table
DIMENSIONS in inches (millimeters)
W
T
MB
MB
L
SIZE CODE
0201 (1)
(0603)
L
W
T MAX.
0.024 ± 0.0012
(0.60 ±0.03)
0.012 ± 0.0012
(0.30 ±0.03)
0.013
(0.33)
0.024 ± 0.002
(0.60 ±0.05)
(2)
0.024 ± 0.002
(0.60 ±0.05)
(2)
(2)
0.014
(0.35)
MB
0.006 ± 0.002
(0.15 ± 0.05)
Notes
(1) Reflow soldering only
(2) For capacitance values  0.68 μF
Revision: 09-Oct-14
Document Number: 28538
250
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Ultra Small Series 0201
www.vishay.com
Vishay
SELECTION CHART
DIELECTRIC
STYLE
SIZE CODE
VOLTAGE VDC
VOLTAGE CODE
CAP. CODE
CAP.
0R5
0.5 pF
1R0
1.0 pF
1R2
1.2 pF
1R5
1.5 pF
1R8
1.8 pF
2R2
2.2 pF
2R7
2.7 pF
3R3
3.3 pF
3R9
3.9 pF
4R7
4.7 pF
5R6
5.6 pF
6R8
6.8 pF
8R2
8.2 pF
100
10 pF
120
12 pF
150
15 pF
180
18 pF
220
22 pF
270
27 pF
330
33 pF
390
39 pF
470
47 pF
560
56 pF
680
68 pF
820
82 pF
101
100 pF
121
120 pF
151
150 pF
181
180 pF
221
220 pF
271
270 pF
331
330 pF
391
390 pF
471
470 pF
561
560 pF
681
680 pF
821
820 pF
102
1000 pF
152
1500 pF
222
2200 pF
332
3300 pF
472
4700 pF
682
6800 pF
103
0.010 μF
153
0.015 μF
223
0.022 μF
333
0.033 μF
473
0.047 μF
683
0.068 μF
104
0.10 μF
224
0.22 μF
474
0.47 μF
105
1.0 μF
C0G (NP0)
16 V
J
25 V
X
50 V
A
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
6.3 V
Y
10 V
Q
L
L
L
L
L
L
L
L
L
L
L
L
L (1)
L
L (2)
X5R
VJ0201
0201
16 V
25 V
J
X
50 V
A
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L (2)
X7R
L (2)
10 V
Q
L
L
L
L
L
L
L
16 V
J
25 V
X
50 V
A
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
Notes
• Letters indicate product thickness, see “Packaging quantities”
(1) Only in 20 % (code “M”) tolerance
(2) Not in 5 % (code “J”) tolerance
Revision: 09-Oct-14
Document Number: 28538
251
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Ultra Small Series 0201
www.vishay.com
Vishay
PACKAGING QUANTITIES
PAPER TAPE
SIZE CODE
(inch / mm)
THICKNESS
(mm)
7" REEL (C)
13" REEL (P)
0201 (0603)
0.35
15K
-
PAPER TAPE SPECIFICATIONS
DIMENSIONS OF PAPER TAPE
in millimeters
PRODUCT SIZE CODE
SYMBOL
P0
0201
P2
D0
E
F
W
B0
A0
P1
REEL SPECIFICATION
A0
0.38 ± 0.05
B0
0.68 ± 0.05
W
8.00 ± 0.10
E
1.75 ± 0.05
F
3.50 ± 0.05
D0
1.55 ± 0.05
P0
4.00 ± 0.10
P1
2.00 ± 0.05
P2
2.00 ± 0.05
REEL DIMENSIONS AND TAPE WIDTH
in millimeters
D C
A
SYMBOL
Ø 180 mm; 7"
Ø 330 mm; 13"
A
13.0 ± 0.5
13.0 ± 0.5
B
9.0 ± 1.0
9.0 ± 1.0
C
178.0 ± 1.0
330.0 ± 1.0
D
60.0 ± 1.0
100.0 ± 1.0
B
Revision: 09-Oct-14
Document Number: 28538
252
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Ultra Small Series 0201
www.vishay.com
Vishay
CONSTRUCTION
NO.
NAME
C0G (NP0), X5R, X7R
1
Ceramic material
BaTiO3 based
2
Inner electrode
Ni
3
4
Termination
5
Inner layer
Cu
Middle layer
Ni
Outer layer
Sn (matt)
3
4
5
1
2
STORAGE AND HANDLING CONDITIONS
(1) To store products at 5 °C to 40 °C ambient temperature and 20 % to 70 % relative humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed.
Cautions:
a. Do not store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which
easily be resulted in poor soldering.
b. To store products on the shelf and avoid exposure to moisture.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 09-Oct-14
Document Number: 28538
253
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC MLCC Chip Array
www.vishay.com
Vishay
Surface Mount Multilayer Ceramic Chip Capacitors
Array for Commodity Applications
FEATURES
• High density mounting due to mounting space
saving
• Mounting cost saving
• Increased throughput
• Dry sheet manufacturing technology
• Base Metal Electrode system (BME)
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
• For use as a bypass for digital and analog signal line noise
• Computer motherboards and peripherals
• The common electronic circuits
ELECTRICAL SPECIFICATION
Size
Dielectric
Capacitance (1)
Capacitance Tolerance (2)
Rated Voltage (VDC)
tan /Q (1)
Insulation Resistance at UR
4 x 0603
C0G (NP0)
X7R
Y5V
10 pF to 470 pF
180 pF to 100 nF
10 nF to 100 nF
J (± 5 %), K (± 10 %)
K (± 10 %), M (± 20 %)
M (± 20 %)
Z (-20 %/+80 %)
50 V
16 V, 50 V
50 V
Cap. < 30 pF: Q  400 + 20 C
Cap.  30 pF: Q  1000
UR = 50 V:  2.5 %
UR = 16 V:  3.5 %
5%
 10 G
Operating Temperature
Capacitance Change
Termination
 10 G or R x C  500  x F, whichever is less
-55 °C to +125 °C
± 30 ppm
-25 °C to +85 °C
± 15 %
+30 %/-80 %
Ni/Sn lead (Pb)-free termination
Notes
(1)
(2)
Measured at 30 % ~ 70 % related humidity
NP0: apply 1.0 VRMS ± 0.2 VRMS, 1.0 MHz ± 10 % at the conditions of 25 °C ambient temperature
X7R: apply 1.0 VRMS ± 0.2 VRMS, 1.0 kHz ± 10 % at the conditions of 25 °C ambient temperature
Y5V: apply 1.0 VRMS ± 0.2 VRMS, 1.0 kHz ± 10 % at the conditions of 20 °C ambient temperature
Preconditioning for X7R, Y5V MLCC: Perform a heat treatment at 150 °C ± 10 °C for 1 h, then leave in ambient condition for 24 h ± 2 h
before measurement.
Revision: 07-Nov-13
Document Number: 28539
254
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC MLCC Chip Array
www.vishay.com
Vishay
QUICK REFERENCE DATA
DIELECTRIC
CASE
CAPACITANCE
MAXIMUM VOLTAGE
(V)
MINIMUM
MAXIMUM
C0G (NP0)
0612
50
10 pF
470 pF
X7R
0612
50
180 pF
100 nF
Y5V
0612
50
10 nF
100 nF
Note
• Detail ratings see “Selection Chart”
ORDERING INFORMATION
VJ06C4
A
100
J
X
A
C
W1BC
SIZE
CODE
DIELECTRIC
CAPACITANCE
TOLERANCE
TERMINATION
RATED
VOLTAGE
PACKAGING
PROCESS CODE FOR
BASIC COMMODITY
06C4
A = C0G (NP0)
Y = X7R
V = Y5V
Two significant
digits followed
by the number
of zeros.
R is in place of
decimal point:
100 = 10 pF
101 = 100 pF
J=±5%
K = ± 10 %
M = ± 20 %
Z = -20 %/
+80 %
X = Ni Barrier
J = 16 V
A = 50 V
C = 7" reel/
paper tape
DIMENSIONS in inches (millimeters)
L
S
W
T
BW
P
SIZE CODE
L
W
T
MAX.
S
BW
P
0612
(1632)
0.125 0.006
(3.20 ± 0.15)
0.063 0.006
(1.60 ± 0.15)
0.036
(0.90)
0.012 ± 0.008
(0.30 ± 0.20)
0.016 ± 0.006
(0.40 ± 0.15)
0.031 ± 0.006
(0.80 ± 0.15)
Revision: 07-Nov-13
Document Number: 28539
255
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC MLCC Chip Array
www.vishay.com
Vishay
SELECTION CHART
DIELECTRIC
C0G (NP0)
X7R
STYLE
Y5V
VJ06C4
SIZE CODE
0612 (4 x 0603)
VOLTAGE VDC
VOLTAGE CODE
50 V
16 V
50 V
50 V
A
J
A
A
CAP. CODE
CAP.
100
10 pF
B
150
15 pF
B
220
22 pF
B
330
33 pF
B
470
47 pF
B
680
68 pF
B
101
100 pF
B
151
150 pF
B
181
180 pF
B
B
221
220 pF
B
B
271
270 pF
B
B
331
330 pF
B
B
391
390 pF
B
471
470 pF
B
102
1.0 nF
B
152
1.5 nF
B
222
2.2 nF
B
332
3.3 nF
B
472
4.7 nF
B
682
6.8 nF
B
103
10 nF
B
B
153
15 nF
B
B
B
223
22 nF
B
B
B
333
33 nF
B
B
473
47 nF
B
B
683
68 nF
B
104
100 nF
B
B
B
Note
• Letters indicate product thickness, see “Packaging Quantities”
Revision: 07-Nov-13
Document Number: 28539
256
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC MLCC Chip Array
www.vishay.com
Vishay
PACKAGING QUANTITIES
SIZE CODE
06C4 (4 x 0603)
7" REEL (C)
13" REEL (P)
0.80 ± 0.10
4K
-
PAPER TAPE SPECIFICATIONS
DIMENSIONS OF PAPER TAPE
in millimeters
P0
SYMBOL
P2
D0
PAPER TAPE
THICKNESS
(mm)
E
F
W
B0
A0
P1
REEL SPECIFICATION
PRODUCT SIZE CODE
06C4 (4 x 0603)
A0
2.00 ± 0.10
B0
3.50 ± 0.10
W
8.00 ± 0.10
E
1.75 ± 0.05
F
3.50 ± 0.05
D0
1.50 ± 0.05
P0
4.00 ± 0.10
P1
4.00 ± 0.10
P2
2.00 ± 0.05
REEL DIMENSIONS AND TAPE WIDTH
in millimeters
D C
A
SYMBOL
Ø 180 mm; 7"
Ø 330 mm; 13"
A
13.0 ± 0.5
13.0 ± 0.5
B
9.0 ± 1.0
9.0 ± 1.0
C
178.0 ± 1.0
330.0 ± 1.0
D
60.0 ± 1.0
100.0 ± 1.0
B
Revision: 07-Nov-13
Document Number: 28539
257
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC MLCC Chip Array
www.vishay.com
Vishay
CONSTRUCTION
NO.
NAME
C0G (NP0), X7R, Y5V
1
Ceramic material
BaTiO3 based
2
Inner electrode
3
4
5
Termination
Ni
Inner layer
Cu
Middle layer
Ni
Outer layer
Sn (matt)
3
4
5
1
2
STORAGE AND HANDLING CONDITIONS
(1) To store products at 5 °C to 40 °C ambient temperature and 20 % to 70 % relative humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed.
Cautions:
a. Do not store products in a corrosive environment such as sulfide, chloride gas, or acid. It may cause oxidization of electrode, which
easily be resulted in poor soldering.
b. To store products on the shelf and avoid exposure to moisture.
c. Do not expose products to excessive shock, vibration, direct sunlight and so on.
Revision: 07-Nov-13
Document Number: 28539
258
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Contents
VJ Vitramon Packaging.......... 260
VJ Soldering
Recommendations................. 265
VJ Marking Options ............... 268
Related
Documents
and
Requirements
Vishay Vitramon MLCC
End Termination..................... 270
VJ....W1BC Test Procedure
and Requirements.................. 272
VJ....W1BC Soldering and
Footprint Design .................... 278
VJ Vitramon Packaging
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
Access hole at slot
location (Ø 40 mm min.)
D
W3 Includes flange
distortion at outer edge
Full radius
W2 (measured at hub)
A
N (hub diameter)
C
Arbor hole
diameter
W1 (measured at hub)
If present, tape slot in core
for tape start: 2.5 mm min.
width x 10.0 min. depth.
B (1)
Note
(1) Drive spokes optional, if used, asterisked dimensions B and D apply.
REEL DIMENSIONS in inches (millimeters)
TAPE
SIZE
A MAX.
B MIN.
C
D MIN.
N MIN.
W1
W2 MAX.
0.331 + 0.059/- 0.0
(8.4 + 1.5/- 0.0)
0.567
(14.4)
0.488 + 0.079/- 0.0
(12.4 + 2.0/- 0.0)
0.724
(18.4)
2.401
(61.0)
0.646 + 0.079/- 0.0
(16.4 + 2.0/- 0.0)
0.882
(22.4)
2.362
(60.0)
0.960 + 0.079/- 0.0
(24.4 + 2.0/- 0.0)
1.197
(30.4)
8 mm
12 mm
12.992
(330)
1.969
(50.0)
0.059
(1.5)
0.512 + 0.020/- 0.008
(13.0 + 0.50/- 0.20)
16 mm
24 mm
23.976
(609)
0.795
(20.2)
W3
Shall
accommodate
tape width
without
interference
1.457
(37.0)
Notes
(1)
For reels less than 360 mm diameter (A), the most widely used reel diameters are 178 mm ± 2 mm and 330 mm ± 2 mm. Reel diameters
ranging from 254 mm to 292 mm also exist. Commonly used hub diameters are 80 mm, 100 mm, 150 mm and 178 mm.
(2)
Tape with components must wrap around hub without damage.
Revision: 19-Aug-14
Document Number: 45051
260
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Vitramon Packaging
www.vishay.com
Vishay Vitramon
STANDARD PACKAGING QUANTITIES (1)(2)(3)(7)
7" REEL QUANTITIES
BODY SIZE
TAPE SIZE
PAPER TAPE
PACKAGING CODE
“C” / “O” (5)
0402 (4)
0505
0603
0805 (6)
1111
1206 (6)
1210 (6)
1808
1812
1825
2008
2012
2220
2225
2525
3040
3640
3838
4044
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
16 mm
16 mm
16 mm
24 mm
5000 / 10 000
n/a
4000
3000
n/a
3000
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
11 1/4" AND 13" REEL QUANTITIES
PLASTIC TAPE
PACKAGING CODE
“T” / “E” (7)
LOW
QUANTITY
“J”
PAPER TAPE
PACKAGING CODE
“P” / “I” (5)
PLASTIC TAPE
PACKAGING CODE
“R” / “M” (7)
n/a
3000
4000
3000
2500
2500 / 3000
2000 / 2500 / 3000
2000
1000
1000
2000
1000
1000
1000
1000
500
500
400
300
1000
1000
1000
1000
1000
1000
1000
500
500
500
n/a
n/a
500
500
500
n/a
n/a
n/a
n/a
10 000 / 30 000
n/a
10 000
10 000
n/a
10 000
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
n/a
10 000
10 000
10 000
10 000
9000 / 10 000
9000 / 10 000
10 000
4000
4000
10 000
4000
4000
4000
n/a
n/a
n/a
n/a
n/a
Notes
(1) For details see individual datasheet.
(2) Reference: EIA standard 481 - “Taping of Surface Mount Components for Automatic Handling” packaging quantities used unless specified
in single datasheets.
(3) n/a = not available, not supported anymore.
(4) Quantity can vary with customer request.
(5) Flamed paper tape code “O” (7" reel) and “I” (11 1/4" / 13" reel) for AgPd terminated parts (termination code ”F”, “E” and size 0402 /
0603 / 0805).
(6) Packaging code “C/P” or “T/R” and lower quantities can depend from product thickness.
(7) Packaging code “E” and “M” used in automotive series (VJ..31 / VJ..34) for size 0603 / 0805 / 1206 / 1210 where applicable.
PLASTIC BLACK CONDUCTIVE POLYCARBONATE CARRIER TAPE
STANDARD PACKAGING QUANTITIES
(1)(2)
BODY
SIZE
TAPE
SIZE
7" REEL QUANTITIES
PACKAGING CODE MUST INCL. PROCESS CODE
“TA3”
11 1/4" AND 13" REEL QUANTITIES
PACKAGING CODE MUST INCL. PROCESS CODE
“RA3”
0603
0805
1206 (4)
1210 (4)
1808
1812
1825
2220
2225
3040
3640
4044
8 mm
8 mm
8 mm
8 mm
12 mm
12 mm
12 mm
12 mm
12 mm
16 mm
16 mm
24 mm
4000
3000
2500 / 3000
2000 / 2500 / 3000
2000
1000
1000
1000
1000
500
500
300
10 000
10 000
9000 / 10 000
9000 / 10 000
10 000
4000
4000
4000
4000
n/a
n/a
n/a
Notes
(1) Contact [email protected] for available series.
(2) Reference: EIA standard 481 - “Taping of Surface Mount Components for Automatic Handling” packaging quantities used unless specified
in single datasheets.
(3) n/a = not available, not supported anymore.
(4) Quantity can vary with customer request.
Revision: 19-Aug-14
Document Number: 45051
261
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Vitramon Packaging
www.vishay.com
Vishay Vitramon
EMBOSSED 8 mm, 12 mm, 16 mm AND 24 mm CARRIER TAPE
T
T2
[10 pitches cumulative tolerance on tape ± 0.2 mm]
E1
P0
P2
Ø D0
A0
K0
B1
F
B0
W
E2
Cover tape
S1
T1
B1 is for tape feeder reference only,
including draft concentric about B0.
Ø D1
P1
Cavity center lines
Embossment for cavity
size see variable
dimension table.
User feed direction
Figure 1
CONSTANT CARRIER TAPE METRIC DIMENSIONS in inches (millimeters)
TAPE SIZE
D0
E1
P0
P2
S1 MIN.
T MAX.
T1 MAX.
8 mm and 12 mm
0.059 + 0.004/- 0.0
(1.50 + 0.10/- 0.0)
0.069 ± 0.004
(1.75 ± 0.10)
0.175 ± 0.004
(4.0 ± 0.10)
0.079 ± 0.002
(2.0 ± 0.05)
0.024
(0.60)
0.024)
(0.60)
0.004
(0.10)
VARIABLE CARRIER TAPE METRIC DIMENSIONS in inches (millimeters)
TAPE SIZE
B1 MAX.
D1 MIN.
E2 MIN.
F
P1
R MIN.
T2 MAX.
W MAX.
A0, B0 AND K0
8 mm
2 mm
Pitch
0.171
(4.35)
0.0177
(0.450)
0.246
(6.25)
0.138 ± 0.002
(3.50 ± 0.05)
0.79 ± 0.004
(2.00 ± 0.10)
0.984
(25.0)
0.098
(2.50)
0.327
(8.30)
See note (1)
8 mm
4 mm
Pitch
0.171
(4.35)
0.0177
(0.450)
0.246
(6.25)
0.138 ± 0.002
(3.50 ± 0.05)
0.157 ± 0.004
(4.00 ± 0.10)
0.984
(25.0)
0.098
(2.50)
0.327
(8.30)
See note (1)
12 mm
2 mm
Pitch
0.323
(8.20)
0.059
(1.50)
0.404
(10.25)
0.217 ± 0.002
(5.50 ± 0.05)
0.157 ± 0.004
(4.00 ± 0.10)
1.181
(30.0)
0.256
(6.50)
0.484
(12.30)
See note (1)
16 mm
4 mm
Pitch
0.476
(12.1)
0.059
(1.50)
0.561
(14.25)
0.295 ± 0.004
(7.50 ± 0.10)
0.157 ± 0.004
(4.00 ± 0.10)
1.181
(30.0)
0.341
(8.0)
0.641
(16.3)
See note (1)
0.453 ± 0.004
(11.5 ± 0.10)
0.157 ± 0.004
(4.00 ± 0.10)
to
0.787 ± 0.004
(20.00 ± 0.10)
in 0.157 (4.00)
increments
1.181
(30.0)
0.472
(12.0)
0.956
(24.3)
See note (1)
24 mm
Pitch
0.791
(20.1)
0.059
(1.50)
0.876
(22.25)
Note
(1)
The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
a) The component does not protrude above the top surface of the carrier tape.
b) The component can be removed from the cavity in a vertical direction without mechanical restriction, after the cover tape has been
removed.
c) Rotation of the component is limited to 20° maximum for 8 mm/12 mm tapes and 10° maximum for 16 mm/24 mm figure 4 and 5.
d) Lateral movement of the component is restricted to 0.5 mm maximum for 8 mm, 12 mm wide tape and to 1.0 mm maximum for 16 mm /
24 mm wide tape figure 3.
Revision: 19-Aug-14
Document Number: 45051
262
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Vitramon Packaging
www.vishay.com
Vishay Vitramon
PAPER 8 mm CARRIER TAPE
[10 pitches cumulative tolerance on tape ± 0.2 mm]
P2
T
Ø D0
E1
P0
A0
F
Bottom cover
tape
W
B0
E2
Cover tape
T1
T1
P1
Cavity center lines
G
Bottom cover tape
Cavity size (1)
User feed direction
Figure 2
CONSTANT CARRIER TAPE METRIC DIMENSIONS in inches (millimeters)
TAPE SIZE
D0
E1
P0
P2
T1 MAX.
G MIN.
R REF.
8 mm
0.059 + 0.004/- 0.0
(1.50 + 0.10/- 0.0)
0.069 + 0.004
(1.75 ± 0.10)
0.175 + 0.004
(4.0 ± 0.10)
0.079 + 0.002
(2.0 ± 0.05)
0.024
(0.60)
0.029
(0.75)
0.010
(0.25)
VARIABLE CARRIER TAPE METRIC DIMENSIONS in inches (millimeters)
TAPE SIZE
E2 MIN.
F
P1
W MAX.
A0, B0 AND K0
T
8 mm
2 mm
Pitch
0.246
(6.25)
0.138 ± 0.002
(3.50 ± 0.05)
0.79 ± 0.004
(2.00 ± 0.10)
0.327
(8.30)
See note 1
1.1 mm maximum for
paper base tape
8 mm
4 mm
Pitch
0.246
(6.25)
0.138 ± 0.002
(3.50 ± 0.05)
0.157 ± 0.004
(4.00 ± 0.10)
0.327
(8.30)
See note 1
1.1 mm maximum for
paper base tape
Note
(1)
The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that:
a) The component does not protrude above the top surface of the carrier tape.
b) The component can be removed from the cavity in a vertical direction without mechanical restriction, after the cover tape has been
removed.
c) Rotation of the component is limited to 20° maximum for 8 mm and 12 mm tapes and 10° maximum for 16 mm figure 3 and 4.
d) Lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape and to 1.0 mm maximum for
16 mm wide tape figure 5.
Revision: 19-Aug-14
Document Number: 45051
263
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Vitramon Packaging
www.vishay.com
Vishay Vitramon
MAXIMUM COMPONENT ROTATION FOR PUNCHED AND EMBOSSED CARRIER
Maximum Lateral Movement Carrier Top View
8 mm and 12 mm carrier: 0.020" (0.50 mm) maximum
16 mm and 24 mm carrier: 0.039" (1.0 mm) maximum
8 mm and 12 mm carrier: 0.020" (0.50 mm) maximum
16 mm and 24 mm carrier: 0.039" (1.0 mm) maximum
Figure 3
Maximum Component Rotation Embossed Carrier Side View
Maximum Component Rotation Paper Carrier Side View
8 mm carrier: 20°
8 mm and 12 mm carrier: 20°
16 mm and 24 mm carrier: 10°
Figure 4
MAXIMUM LATERAL MOVEMENT FOR PUNCHED AND EMBOSSED CARRIER
Maximum Component Rotation Top View
8 mm and 12 mm carrier: 20°
16 mm and 24 mm carrier: 10°
Typical pocket centerline
Typical pocket centerline
Figure 5
BENDING RADIUS FOR PUNCHED EMBOSSED CARRIER
Embossed carrier
bending radius (1)
Punched carrier bending
radius (1)
R
R
Figure 6
Note
(1) The tape with or without components shall pass without damage round “R”, see dimensions table
Revision: 19-Aug-14
Document Number: 45051
264
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Soldering Recommendations
www.vishay.com
Vishay
Surface Mount Multilayer Ceramic Chip Capacitors
SOLDERING RECOMMENDATIONS
1. Termination Selection (1)
• The termination selected depends on the assembly
method to be used and the requirements of the
application.
• Reflow solder assembly: select termination code “X”.
For CDR-MIL-PRF 55681 product, select termination
code “W” or “Y”.
• Wave solder assembly: select termination code “X”.
For CDR-MIL-PRF 55681 product, select termination
code “W” or “Y”.
• Additional board flex protection: select the polymer
termination code “B”.
• Conductive epoxy assembly: select termination code
“F” and “E” (2)
For CDR-MIL-PRF 55681 and DSCC product, select
termination code “M”.
• Non-magnetic requirements: select termination code
“C” for solder assembly, or “N” for conductive epoxy
assembly.
• Lead-bearing requirements: select termination code ”L”
For CDR-MIL-PRF 55681 and DSCC product, select
termination code “Z” or “U”.
Notes
(1) Where applicable, see datasheets
(2) Termination code “E” is for conductive epoxy assembly, contact
[email protected] for availability.
2. Chip Size vs. Solder Profile
A. 0402, 0505, 0603, 0805, 1111, 1206, and 1210
(thickness  0.049", 1.24 mm) can be used in all three
solder systems shown on the following page.
1111, 1210 to 1812 with a thickness > 0.049" (1.24 mm)
and case size 1825 and larger should not be wave
soldered.
B. Solder profiles should be properly controlled to minimize
any thermal shock to the capacitor(s).
5. Soldering Techniques
Generalized soldering curves shown on next page.
6. Soldering with a Solder Iron
Attachment by soldering iron is not recommended. A heat
shock may cause a crack in the MLCC chip capacitors,
however, if solder iron is used, the following precautions
should be taken:
A. Preheat the chip capacitor to +150 °C minimum. Use hot
plate or hot air flow for preheat.
B. Use a low wattage, temperature controlled iron.
C. Tip temperature setting  280 °C and a maximum
soldering time of 5 s.
D. Use a soldering tip no greater than 0.120" (3.0 mm) in
diameter. Apply the transmission of heat through the
soldering material.
E. When removal of chip capacitor is necessary, a hot air
pencil is the preferred tool.
7. Cool Down
After soldering, allow the chip to cool at room ambient
conditions. Using forced cool air or refrigerated air for
expediting the cooling process is not recommended and
can create thermal shock cracks and may facilitate board
bend stresses.
8. Cleaning
Selection of an appropriate cleaning solvent is dependent
upon the type of flux used. Cleaning in alcohol, water,
hydrocarbons or any of the common, halogenated
degreaser solvents is not detrimental to Vishay chip
capacitors.
(See recommended solder profiles on the following page.)
3. Soldering Flux
Use mildly activated rosin flux RMA or RA types or low
residue liquid fluxes (no-clean flux). Flux residues from
no-clean flux can be removed with aqueous cleaners.
During wave soldering ensure that the majority of solvents
are removed at preheat.
4. Solder Type
Both, lead containing solders, such as Sn60, Sn62 or Sn63
and lead free solders, such as SnAgCu, can be used with
our MLCCs.
In case of termination code “C”, use lead containing or
lead (Pb)-free SAC405 solder.
Revision: 26-Jan-15
Document Number: 45034
265
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Soldering Recommendations
www.vishay.com
Vishay
WAVE AND REFLOW SOLDERING GRAPHS
WAVE SOLDERING
300
T
(°C)
250
T
(°C)
SECOND WAVE
235 °C to 260 °C
200
300
MAX. TEMPERATURE
250
> 215 °C 20 ~ 40 s
~
~ 5 K/s
FIRST WAVE
200
~
~ 2 K/s
~ 200 K/s
~
150
100
IR REFLOW WITH SnPb SOLDER
10 s
150
MIN. TEMPERATURE
100 °C to 130 °C
100
FORCED
COOLING
~
2
~ K/s
50
Sn-Pb EUTECTIC SOLDER PASTE
50
0
0
0
50
100
150
200 t (s) 250
30 ~ 60 s
30 ~ 60 s
30 ~ 60 s
TIME
LEAD (Pb)-FREE SOLDERING PROFILE
300
MIN. 300 s
MIN. 255 °C
MAX. 260 °C
TEMPERATURE (°C)
250
T (SOLID) MIN. 217 °C
MIN. 190 °C
200
MIN. 40 s
MIN. 90 s
150
100
RAMP DOWN
FROM T (SOLID)
MAX. 6 K/s
RAMP UP
TO 150 °C
MAX. 3 K/s
50
MIN. 110 s
0
0
Revision: 26-Jan-15
50
100
150
200
250
300
350
400
TIME (s)
Document Number: 45034
266
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Soldering Recommendations
www.vishay.com
Vishay
WAVE AND REFLOW SOLDERING
WAVE SOLDERING
Vishay offers the following recommendations:
1. Set dwell time in the solder wave 2 s to 3 s. Solder pot
set at +240 °C to +260 °C. Belt speed at 3 feet/min to 5
feet/min.
2. Adjust flux station (foam, spray or wave) topside preheat
at +80 °C to +105 °C.
3. Set preheat  +160 °C below the solder wave
temperature. Usually maximum underside PC board
temperature at last preheat zone is +150 °C. Preheat
rate should be 1.5 °C/s to 2.5 °C/s.
4. Do not force cool the PC board. Maintain a uniform
profile.
5. Finally check that the delta difference between the
solder temperature and the temperature as the PC
board leaves the last preheat zone is +160 °C or less.
Chip size and mass make some types more prone to
thermal shocking during the soldering operation,
leading to insulation resistance (IR) failures in use.
REFLOW SOLDERING (SnPb - Solder)
The reflow soldering process using no-clean solder paste
for mounting ceramic chip capacitors has wide acceptance.
Chip capacitors may develop thermally induced cracks if the
temperature changes in reflow process are not controlled.
Vishay offers the following recommendations:
1. Set peak reflow temperature at +215 °C to +260 °C
based on paste melting point.
2. First preheat zone temperature elevation at +150 °C
± 10 °C, ramp rate 3 °C/s.
3. Second preheat zone temperature +150 °C ± 10 °C,
ramp rate of 0.1 °C/s. Set preheat for  60 s. Long
preheat times could cause solder balls near the
capacitor/other components.
4. Adjust reflow zone temperatures to +150 °C ± 10 °C to
+225 °C ± 5 °C at ramp of 4 °C/s to 5 °C/s. Total time at
reflow over +200 °C should not exceed 15 s to 20 s.
5. Use natural cooling at the final cooling zone. Maintain a
uniform profile no more than -3 °C/s.
Vishay does not recommend wave soldering for chip size
1111, 1210 to 1812 with a thickness > 0.049" (1.24 mm) and
case size 1825 and larger should not be wave soldered.
VAPOR PHASE REFLOW
TEMPERATURE (°C)
ENTRANCEPREHEAT
REFLOW
ZONE
COOL DOWN
ZONE
215
200
150
With vapor phase reflow, heat reaches the product uniformly
and quickly because of vapor condensation heating. During
condensation heating a dense vapor condenses on all
exposed surfaces. Due to the inherent low boiling point
(+215 °C) for liquids used in vapor phase, ceramic chips can
be reflowed without thermal shock damage. Vishay offers
the following recommendations:
1. Preheat or pre-bake zone duration should be about
1.5 min to 2 min. Infrared heating can be used for preheat
sections.
2. Vapor phase zone maximum temperature is +215 °C
with typical settings at +210 °C.
3. Total duration is typically 4 min to 5 min, use natural
cooling at the final cooling zone.
100
50
0
1
2
3
4
TIME (min)
SOLDERING ZONE RANGE
Revision: 26-Jan-15
RECOMMENDED AREA
Document Number: 45034
267
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Marking Options
www.vishay.com
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitors
Vishay Vitramon Marking Option
Vishay Vitramon can provide on selected MLCC capacitors a laser marking.
E. I. A. MARKING CODES
LETTER
0
1
2
3
4
5
6
7
A
1
10
100
1000
10 000
100 000
1 000 000
10 000 000
B
1.1
11
110
1100
11 000
110 000
1 100 000
11 000 000
C
1.2
12
120
1200
12 000
120 000
1 200 000
12 000 000
D
1.3
13
130
1300
13 000
130 000
1 300 000
13 000 000
E
1.5
15
150
1500
15 000
150 000
1 500 000
15 000 000
F
1.6
16
160
1600
16 000
160 000
1 600 000
-
G
1.8
18
180
1800
18 000
180 000
1 800 000
-
H
2
20
200
2000
20 000
200 000
2 000 000
-
J
2.2
22
220
2200
22 000
220 000
2 200 000
-
K
2.4
24
240
2400
24 000
240 000
2 400 000
-
L
2.7
27
270
2700
27 000
270 000
2 700 000
-
M
3
30
300
3000
30 000
300 000
3 000 000
-
N
3.3
33
330
3300
33 000
330 000
3 300 000
-
P
3.6
36
360
3600
36 000
360 000
3 600 000
-
Q
3.9
39
390
3900
39 000
390 000
3 900 000
-
R
4.3
43
430
4300
43 000
430 000
4 300 000
-
S
4.7
47
470
4700
47 000
470 000
4 700 000
-
T
5.1
51
510
5100
51 000
510 000
5 100 000
-
U
5.6
56
560
5600
56 000
560 000
5 600 000
-
V
6.2
62
620
6200
62 000
620 000
6 200 000
-
W
6.8
68
680
6800
68 000
680 000
6 800 000
-
X
7.5
75
750
7500
75 000
750 000
7 500 000
-
Y
8.2
82
820
8200
82 000
820 000
8 200 000
-
Z
9.1
91
910
9100
91 000
910 000
9 100 000
-
a
2.5
25
250
2500
25 000
250 000
2 500 000
-
b
3.5
35
350
3500
35 000
350 000
3 500 000
-
d
4
40
400
4000
40 000
400 000
4 000 000
-
e
4.5
45
450
4500
45 000
450 000
4 500 000
-
f
5
50
500
5000
50 000
500 000
5 000 000
-
m
6
60
600
6000
60 000
600 000
6 000 000
-
n
7
70
700
7000
70 000
700 000
7 000 000
-
t
8
80
800
8000
80 000
800 000
8 000 000
-
y
9
90
900
9000
90 000
900 000
9 000 000
-
Revision: 16-Jul-14
Document Number: 45028
268
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ Marking Options
www.vishay.com
Vishay Vitramon
E. I. A. MARKING CODES - MARKING OPTION “M”
Examples:
VA1
3rd digit: multiplier
2nd digit: capacitance code
1st digit: Vishay Vitramon company logo
VA9 = 0.1 pF
Vd9 = 0.4 pF
VA3 = 1000 pF
VS4 = 47 000 pF
Notes
• Values less than 1.0 pF use 2nd character “9” (= divided by 10).
• Marking appears in laser-marked legible contrast.
• Orientation of marking is vendor optional. Reference EIA 198.
• For details see individual datasheets.
AUTOMOTIVE SERIES MARKING - MARKING OPTION “B”
Example:
V4a
V4a = year 2014, week 1
3rd digit “a to z” = week 1 to 26
“A to Z” = week 27 to 52
2nd digit = year
1st digit = Vishay Vitramon company logo
Notes
• Marking only on size 0805 and 1206.
• No marking for AgPd terminated parts, termination code “F” and “E”.
• Marking appears in laser-marked legible contrast.
SAFETY CAP SERIES MARKING - MARKING OPTION “S”
Examples:
VC
2nd digit = dielectric and classification
1st digit = Vishay Vitramon company logo
VC = C0G (NP0), X1/Y2
VT = C0G (NP0), X2
VA = X7R, X1/Y2
VM = X7R, X2
Note
• Marking appears in laser-marked legible contrast.
Revision: 16-Jul-14
Document Number: 45028
269
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VISHAY VITRAMON
www.vishay.com
Ceramic Capacitors
Tech Note TN-0029
Vishay Vitramon MLCC End Termination
By Eli Bershadsky and Dmitry Kan
Sn: 100 % tin
plate matte finish
(W, X, Y) or Sn / Pb
tin / lead plate
matte finish with
a minimum of
4 % lead (L, Z)
AgPd:
silverpalladium
Figure 1
Termination
codes: F, M, E
Sn60 / Pb40
solder coat finish
with minimum
of 4 % lead
Sn: 100 %
tin plate
matte finish
Sn: 100 %
tin plate
matte finish
Nonmagnetic
Ni:
nickel
plate
barrier
Ni:
nickel
plate
barrier
Ni:
nickel
plate
barrier
Polymer
Cu:
copper
barrier
Ag:
silver
Ag:
silver
Ag:
silver
Ag:
silver
Figure 2
Termination codes:
L, W, X, Y, Z
Figure 3
CDR termination
code: U
Figure 4
Termination code: B
Figure 5
Termination
code: N
Figure 6
Termination code: C
TERMINATION
DEFINITION
ACCEPTED ASSEMBLY
METHODS
F, M (3)
Fired, thick film, silver / palladium
Conductive epoxy / reflow solder (5)
E (2)
Fired, thick film, silver / palladium
Conductive epoxy
N
Fired, thick film, non magnetic material
Conductive epoxy
C (6)
Copper with an outer layer of 100 % tin plate matte finish
for multi-solder mounting
Wave solder (1) / reflow solder /
vapor phase reflow
W (3), X, Y (3)
Fired, thick film silver, covered by 100 % nickel barrier plate with an outer
layer of 100 % tin plate matte finish for multi-solder mounting
Wave solder (1) / reflow solder /
vapor phase reflow
L, Z (3)
Fired, thick film silver, cover by 100 % nickel barrier plate with an
outer layer of tin / lead plate matte finish with a minimum of 4 % lead
for multi-solder mounting
Wave solder (1) / reflow solder /
vapor phase reflow
U (4)
Fired, thick film silver, cover by 100 % nickel barrier plate with an outer
layer of tin / lead plate finish matte with a minimum of 4 % lead for
Sn60 / Pb40 solder coat
Wave solder (1) / reflow solder /
vapor phase reflow
B
Fired, thick film silver, cured thick film polymer silver, covered by
100 % nickel barrier plate with an outer layer of 100 % tin plate
matte finish for multi-solder mounting
Wave solder (1) / reflow solder /
vapor phase reflow
Notes
(1) Case sizes 1111, 1210 to 1812 with a thickness > 0.049" (1.24 mm) and case sizes 1825 and larger should NOT be wave soldered.
(2) Termination code “E” is for conductive epoxy assembly, contact [email protected] for availability.
(3) CDR and DSCC part numbers only.
(4) CDR “U” termination code: Base metallization-barrier metal-solder coated (tin/lead alloy, with a minimum of 4 % lead).
Solder has a melting point of + 200 °C or less. Solder coat thickness is a minimum of 60 microinches.
• Solder iron techniques are not recommended. For more information on soldering visit www.vishay.com/doc?45034.
• Contact [email protected] with respect to specific part number requirements.
(5) Terminations code “F” and “M” may exhibit high wetting angles and lower fillet heights as compared to barrier plate terminations such as
X-term. Contact [email protected] with respect to specific requirements.
(6) For “C” termination solder coverage should be at least 90 % of the terminal critical areas in soldering.
Revision: 27-Jan-15
Document Number: 45063
270
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TECHNICAL NOTE
TERMINATION CODE
FROM PART NUMBERING
Tech Note TN-0029
www.vishay.com
Vishay Vitramon
Vishay Vitramon MLCC End Termination
MLCC END TERMINATION PHYSICAL CHARACTERISTICS
THICK FILM END
TERMINATION
BARRIER
TERMINATION
TERMINATION FINISH
P/N
TERM
CODE
MATERIAL
THICKNESS
(INCHES)
Ni PLATE
THICKNESS
(MICROINCHES)
Sn PLATE
THICKNESS
(MICROINCHES)
Sn/Pb PLATE
THICKNESS
(MICROINCHES)
Sn/Pb
SOLDER COAT
THICKNESS
(MICROINCHES)
CONTENT
OF LEAD
F, M
Ag / Pd
0.001 min.
n/a
n/a
n/a
n/a
n/a
E
Ag / Pd
0.001 min.
n/a
n/a
n/a
n/a
n/a
N
Ag / Pd
0.0012 min.
n/a
n/a
n/a
n/a
n/a
C
Ag
0.001 min.
n/a
100 min.
n/a
n/a
n/a
W, X, Y
Ag
0.001 min.
50 min.
100 min.
n/a
n/a
n/a
L, Z
Ag
0.001 min.
50 min.
n/a
100 min.
n/a
4 % min.
U
Ag
0.001 min.
50 min.
n/a
n/a
60 min.
4 % min.
B
Polymer
0.003 min.
50 min.
100 min.
n/a
n/a
n/a
Notes
• Element definition: Ag = silver, Pd = palladium, Ni = nickel, Sn = tin, Pb = lead
• n/a = not applicable
Document Number: 45063
271
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TECHNICAL NOTE
Revision: 27-Jan-15
VJ....W1BC Test Procedures and Requirements
www.vishay.com
Vishay
Surface Mount Multilayer Chip Capacitors
for Commodity Solutions
Below tables are test procedures and requirements unless specified in detail datasheet.
VJ....W1BC TEST PROCEDURES AND REQUIREMENTS
TEST
PROCEDURE
1) Visual and
mechanical
2) Capacitance
Class 1: C0G (NP0)
Cap.  1000 pF; 1.0 VRMS ± 0.2 VRMS;
1 MHz ± 10 %
Cap. > 1000 pF; 1.0 VRMS ± 0.2 VRMS;
1 kHz ± 10 %
Class 2: X7R, X5R, Y5V
Cap.  10 μF; 1.0 VRMS ± 0.2 VRMS;
1 kHz ± 10 % (1)
3) Q/DF
(dissipation
factor)
Cap. > 10 μF; 0.5 VRMS ± 0.2 VRMS;
120 Hz ± 20 %
Note
(1) Test conditions
0.5 VRMS ± 0.2 VRMS; 1 kHz ± 10 %
X7R:0603:  2.2 μF/10 V
0805: 10 μF/6.3 V and 10 V
X5R: 0201:  220 nF/6.3 V
0402:  4.7 μF/6.3 V
0402:  2.2 μF/10 V
0603: 10 μF/6.3 V
REQUIREMENTS
• No remarkable defect
• Dimensions should confirm to individual specification sheet
• Shall not exceed the limits given in the detailed specification
C0G (NP0): Cap. 30 pF: Q 1000
Cap. < 30 pF: Q400 + 20 C
X5R, X7R:
RATED
DF 
EXCEPTION OF DF 
VOLTAGE
0201 (50 V); 0603  0.047 μF;
3%
0805  0.18 μF; 1206  0.47 μF
 50 V
2.5 %
5%
1210  4.7 μF
0603  1 μF; 0805  1 μF;
10 %
1206  2.2 μF; 1210  10 μF
35 V
3.5 %
10 %
0805  2.2 μF; 1210  10 μF
0201
 0.01 μF; 0805  1 μF;
5%
1210  10 μF
7%
0603  0.33 μF; 1206  4.7 μF
25 V
3.5 %
0402  0.10 μF; 0603  0.47 μF;
10 %
0805  2.2 μF; 1206  6.8 μF;
1210  22 μF
0201  0.01 μF; 0402  0.033 μF;
5%
0603  0.15 μF; 0805  0.68 μF;
1206  2.2 μF; 1210  4.7 μF
16 V
3.5 %
0402  0.22 μF; 0603  0.68 μF;
10 %
0805  2.2 μF; 1206  4.7 μF;
1210  22 μF
0201  0.012 μF; 0402  0.33 μF;
10 %
0603  0.33 μF; 0805  2.2 μF;
10 V
5%
1206  2.2 μF; 1210  22 μF
15 %
0201  0.1 μF; 0402  1 μF
0201  0.1 μF; 0402  1 μF;
15 %
0603  10 μF; 0805  4.7 μF;
6.3 V
10 %
1206  47 μF; 1210  100 μF
20 %
0402  2.2 μF
4V
15 %
Y5V:
RATED
DF 
EXCEPTION OF DF 
VOLTAGE
5%
7%
35 V
7%
-
-
7%
0402  0.047 μF; 0603  0.1 μF;
0805  0.33 μF; 1206  1 μF;
1210  4.7 μF
9%
0402  0.068 μF; 0603  0.47 μF;
1206  4.7 μF; 1210  22 μF
9%
0402  0.068 μF; 0603  0.68 μF
12.5 %
0402  0.22 μF
12.5 %
0603  2.2 μF; 0805  3.3 μF;
1206  10 μF; 1210  22 μF
25 V
Revision: 27-Mar-13
0603  0.1 μF; 0805  0.47 μF;
1206  4.7 μF
 50 V
5%
16 V
C < 1.0 μF
7%
16 V
C  1.0 μF
9%
10 V
12.5 %
20 %
0402  0.47 μF
6.3 V
20 %
-
-
Document Number: 28545
272
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Test Procedures and Requirements
www.vishay.com
Vishay
VJ....W1BC TEST PROCEDURES AND REQUIREMENTS
TEST
PROCEDURE
REQUIREMENTS
• To apply voltage ( 100 V) 250 %
• Duration: 1 s to 5 s
• Charge and discharge current less
than 50 mA
4) Dielectric
strength
• To apply voltage
200 V to 300 V  2 times VDC
500 V to 999 V  1.5 times VDC
1000 V to 3000 V  1.2 times VDC
• Cut-off, set at 10 mA
• TEST = 15 s
• RAMP = 0
Rated voltage  100 V:
To apply rated voltage for max. 120 s
• No evidence of damage or flash-over during test
10 G or R x C  500F whichever is smaller
Class 2 (X5R, X7R, Y5V):
RATED VOLTAGE
INSULATION RESISTANCE
100 V: X7R
50 V: 0603  1 μF; 0805  1 μF;
1206  2.2 μF; 1210  4.7 μF
35 V: 0805  2.2 μF; 1210  10 μF
25 V: 0402  1 μF; 0603  2.2 μF;
0805  2.2 μF; 1206  10 μF;
1210  10 μF
5) Insulation
resistance
16 V: 0402  0.22 μF; 0603  1 μF;
0805  2.2 μF; 1206  10 μF;
1210  47 μF
10 G or R x C  100 F
whichever is less
10 V: 0201  47 nF; 0402  0.47 μF;
0603  0.47 μF; 0805  2.2 μF;
1206  4.7 μF; 1210  47 μF
6.3 V; 4 V
Rated voltage:
200 V to 630 V
To apply rated voltage
(500 V max.) for 60 s
10 G or R x C > 100 F whichever is smaller
Rated voltage:
 630 V
To apply 500 V for 60 s
10 G
With no electrical load:
6) Temperature
coefficient
T.C.
Operating Temp.
T.C.
Capacitance change
C0G (NP0)
- 55 °C to 125 °C at 25 °C
C0G (NP0)
Within ± 30 ppm/°C
X7R
- 55 °C to 125 °C at 25 °C
X7R
Within ± 15 %
X5R
- 55 °C to 85 °C at 25 °C
X5R
Within ± 15 %
Y5V
- 25 °C to 85 °C at 20 °C
Y5V
Within + 30 %/- 80 %
• Pressurizing force:
0201: 2N
7) Adhesive strength
0402 and 0603: 5 N
of termination
> 0603: 10 N
• Test time 10 s ± 1 s
• No remarkable damage or removal of the terminations
8) Vibration
resistance
• Vibration frequency:
10 Hz/min to 55 Hz/min
• Total amplitude: 1.5 mm
• Test time: 6 h (2 h each in
3 mutually perpendicular directions)
• No remarkable damage
• Capacitance change and Q/DF: to meet initial specification
9) Solderability
• Solder temperature: 235 °C ± 5 °C
• Dipping time: 2 s ± 0.5 s
95 % minimum coverage of all metallized area
Revision: 27-Mar-13
Document Number: 28545
273
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Test Procedures and Requirements
www.vishay.com
Vishay
VJ....W1BC TEST PROCEDURES AND REQUIREMENTS
TEST
PROCEDURE
REQUIREMENTS
10) Bending test
• The middle part of the substrate shall
be pressurized by means of the
pressurizing rod at a rate of about
1 mm per s until the deflection
becomes 1 mm and then the pressure
shall be maintained for 5 s ± 1 s
• Measurement to be made after
keeping at room temperature for
24 h ± 2 h
• No remarkable damage
• Capacitance change:
C0G (NP0): within ± 5.0 % or ± 0.5 pF whichever is larger
X7R, X5R: within ± 12.5 %
Y5V: within ± 30 %
(This capacitance change means the change of capacitance under
specified flexure of substrate from the capacitance measured before the
test)
11) Resistance to
soldering heat
• Solder temperature: 260 °C ± 5 °C
• Dipping time: 10 s ± 1 s
• Preheating: 120 °C to 150 °C for
1 min before immerse the capacitor
in a eutectic solder
• Before initial measurement
(class 2 only):
Perform 150 °C + 0 °C/ - 10 °C for 1 h
and then set for 24 h ± 2 h at room
temperature
• Measurement to be made after keeping
at room temperature for
24 h ± 2 h
• No remarkable damage
• Capacitance change:
C0G (NP0): within ± 2.5 % or ± 0.25 pF whichever is larger
X7R, X5R: within ± 7.5 %
Y5V: within ± 20 %
• Q/DF, I.R. and dielectric strength: To meet initial requirements
• 25 % maximum leaching on each edge
• Conduct the 5 cycles according to the
temperature and time
• No remarkable damage
• Capacitance change:
C0G (NP0): within ± 2.5 % or ± 0.25 pF whichever is larger
X7R, X5R: within ± 7.5 %
Y5V: within ± 20 %
• Q/DF, I.R. and dielectric strength: To meet initial requirements
12) Temperature
cycle
Step
Temperature (°C)
Time (min.)
1
Min. operating temp.
+ 0/- 3
30 ± 3
2
Room temperature
2~3
3
Max. operating temp.
+ 3/- 0
30 ± 3
4
Room temperature
2~3
• Before initial measurement
(class 2 only):
Perform 150 °C + 0 °C/- 10 °C for 1 h
and then set for 24 h ± 2 h at room
temperature
• Measurement to be made after
keeping at room temperature for
24 h ± 2 h
Revision: 27-Mar-13
Document Number: 28545
274
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Test Procedures and Requirements
www.vishay.com
Vishay
VJ....W1BC TEST PROCEDURES AND REQUIREMENTS
TEST
PROCEDURE
•
•
•
•
Test temperature: 40 °C ± 2 °C
Humidity: 90 % to 95 % RH
Test time: 500 h + 24 h/- 0 h
Before measurement (class 2
13) Humidity
only): Perform 150 °C + 0 °C/
(damp heat)
- 10 °C for 1 h and then set for
steady state
24 h ± 2 h at room temperature
• Measurement to be made after
keeping at room temperature for
24 h ± 2 h
Revision: 27-Mar-13
REQUIREMENTS
• No remarkable damage
• Capacitance change:
C0G (NP0): within ± 5.0 % or ± 0.5 pF whichever is larger
X7R, X5R:  10 V within ± 12.5 %; 6.3 V, within ± 25 %
Y5V:  10 V within ± 30 %, 6.3 V within + 30 %/- 40 %
• Q/DF value:
C0G (NP0): more than 30 pF: Q350
10 pF C  30 pF: Q275 + 2.5 C;
Less than 10 pF: Q200 + 10 C
X5R, X7R:
RATED
DF 
EXCEPTION OF DF 
VOLTAGE
0201 (50 V); 0603  0.047 μF; 0805  0.18 μF;
6%
1206  0.47 μF
 50 V
3%
10 %
1210  4.7 μF
0603  1 μF; 0805  1 μF; 1206  2.2 μF;
20 %
1210  10 μF
35 V
5%
20 %
0805  2.2 μF; 1210  10μF
10 %
0201  0.01 μF; 0805  1 μF; 1210  10 μF
14 %
0603  0.33 μF; 1206  4.7 μF
25 V
5%
0402  0.10 μF; 0603  0.47 μF; 0805  2.2 μF;
15 %
1206  6.8 μF; 1210  22 μF
0603  0.15 μF; 0805  0.68 μF; 1206  2.2 μF;
10 %
1210  4.7 μF
16 V
5%
0201  0.01 μF; 0402  0.033 μF; 0603  0.68 μF;
15 %
0805  2.2 μF; 1206  4.7 μF; 1210  22 μF
0201  0.012 μF; 0402  0.33 μF; 0603  0.33 μF;
15 %
0805  2.2 μF; 1206  2.2 μF; 1210  22 μF
10 V
7.5 %
20 %
0201  0.1 μF; 0402  1 μF
0201  0.1 μF; 0402  1 μF;
6.3 V
15 %
30 %
0603  10 μF; 0805  4.7 μF;
1206  47 μF; 1210  100 μF
4V
20 %
Y5V:
RATED
DF 
EXCEPTION OF DF 
VOLTAGE
 50 V
7.5 %
10 %
0603  0.1 μF; 0805  0.47 μF; 1206  4.7 μF
35 V
10 %
0402  0.047 μF; 0603  0.1 μF; 0805  0.33 μF;
10 %
1206  1 μF; 1210  4.7 μF
25 V
7.5 %
0402  0.068 μF; 0603  0.47 μF; 1206  4.7 μF;
15 %
1210  22 μF
12.5 % 0402  0.068 μF; 0603  0.68 μF
16 V
10 %
C < 1.0 μF
20 %
0402  0.22 μF
16 V
0603  2.2 μF; 0805  3.3 μF;
12.5 % 20 %
C  1.0 μF
1206  10 μF; 1210  22 μF
10 V
20 %
30 %
0402  0.47 μF
6.3 V
30 %
• I.R.:  10 V: 1 G or R x C  50 F whichever is smaller
CLASS 2 (X5R, X7R, Y5V):
INSULATION
RATED VOLTAGE
RESISTANCE
100 V: X7R
50 V: 0603  1 μF; 0805  1 μF; 1206  2.2 μF;
1210  4.7 μF
35 V: 0805  2.2 μF; 1210  10 μF
25 V: 0402  1 μF; 0603  2.2 μF; 0805  2.2 μF;
1 G or R x C  10 F
1206  10 μF; 1210  10 μF
whichever is less
16 V: 0402  0.22 μF; 0603  1 μF; 0805  2.2 μF;
1206  10 μF; 1210  47 μF
10 V: 0201  47 nF; 0402  0.47 μF; 0603  0.47 μF;
0805  2.2 μF; 1206  4.7 μF; 1210  47 μF
6.3 V; 4 V
Document Number: 28545
275
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Test Procedures and Requirements
www.vishay.com
Vishay
VJ....W1BC TEST PROCEDURES AND REQUIREMENTS
TEST
PROCEDURE
REQUIREMENTS
Test temperature: 40 °C ± 2 °C
Humidity: 90 % ~ 95 % RH
Test time: 500 h + 24 h/- 0 h
To apply voltage: rated voltage
(max. 500 V)
• Before initial measurement
(class 2 only): Perform 150 °C
+ 0 °C/- 10 °C for 1h and then set
for 24 h ± 2 h at room
temperature
• Measurement to be made after
keeping at room temperature
for 24 h ± 2 h
• No remarkable damage
• Capacitance change:
C0G (NP0): within± 7.5 % or ± 0.75 pF whichever is larger.
X7R, X5R: 10 V within ± 12.5 %; 6.3 V, with ± 25 %
Y5V: 10 V within ± 30 %; 6.3 V, within + 30 %/- 40 %
• Q/DF value: C0G (NP0)
Cap 30 pF: Q  200;
Cap < 30 pF: Q  100 + 10/3 C
X5R, X7R:
RATED
EXCEPTION OF DF 
VOLTAGE DF 
0201 (50 V); 0603  0.047 μF; 0805  0.18 μF;
6%
1206  0.47 μF
10 %
1210  4.7 μF
 50 V
3%
0603  1 μF; 0805  1 μF; 1206  2.2 μF;
20 %
1210  10 μF
35 V
5%
20 %
0805  2.2 μF; 1210  10 μF
10 %
0201  0.01 μF; 0805  1 μF; 1210  10 μF
14 %
0603  0.33 μF; 1206  4.7 μF
25 V
5%
0402  0.10 μF; 0603  0.47 μF; 0805  2.2 μF;
15 %
1206  6.8 μF; 1210  22 μF
0603
 0.15 μF; 0805  0.68 μF; 1206  2.2 μF;
10 %
1210  4.7μF
16 V
5%
0201  0.01 μF; 0402  0.033 μF; 0603  0.68 μF;
15 %
0805  2.2 μF; 1206  4.7 μF; 1210  22 μF
0201  0.012 μF; 0402  0.33 μF; 0603  0.33 μF;
15 %
0805  2.2 μF; 1206  2.2 μF; 1210  22 μF
10 V
7.5 %
20 %
0201  0.1 μF; 0402  1 μF
0201
 0.1 μF; 0402  1 μF; 0603  10 μF;
6.3 V
15 %
30 %
0805  4.7 μF; 1206  47 μF; 1210  100 μF
4V
20 %
Y5V:
RATED
EXCEPTION OF DF 
VOLTAGE DF 
 50 V
7.5 %
10 %
0603  0.1 μF; 0805  0.47 μF; 1206  4.7 μF
35 V
10 %
0402  0.047 μF; 0603  0.1 μF; 0805  0.33 μF;
10 %
1206  1 μF; 1210  4.7 μF
25 V
7.5 %
0402  0.068 μF; 0603  0.47 μF; 1206  4.7 μF;
15 %
1210  22 μF
12.5 % 0402  0.068 μF; 0603  0.68 μF
16 V
C < 1.0 μF 10 %
20 %
0402  0.22 μF
0603  2.2 μF; 0805  3.3 μF; 1206  10 μF;
16 V
1210  22 μF
C  1.0 μF 12.5 % 20 %
10 V
20 %
30 %
0402  0.47 μF
6.3 V
30 %
• I.R.:  10 V: 500 M or 25 F whichever is smaller
CLASS 2 (X5R, X7R, Y5V):
INSULATION
RATED VOLTAGE
RESISTANCE
100 V: X7R
50 V: 0603  1 μF; 0805  1 μF; 1206  2.2 μF; 1210  4.7 μF
35 V: 0805  2.2 μF; 1210  10 μF
25 V: 0402  1 μF; 0603  2.2 μF; 0805  2.2 μF; 1206  10 μF; 500 M or
1210  10 μF
R x C  5 F
whichever is less
16 V: 0402  0.22 μF; 0603  1 μF; 0805  2.2 μF; 1206  10 μF;
1210  47 μF
10 V: 0201  47 nF; 0402  0.47 μF; 0603  0.47 μF;
0805  2.2 μF; 1206  4.7 μF; 1210  47 μF
6.3 V; 4 V
•
•
•
•
14) Humidity
(damp heat)
load
Revision: 27-Mar-13
Document Number: 28545
276
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Test Procedures and Requirements
www.vishay.com
Vishay
VJ....W1BC TEST PROCEDURES AND REQUIREMENTS
TEST
PROCEDURE
• Test temperature:
C0G (NP0), X7R/X7E: 125 °C ± 3 °C
X5R, Y5V: 85 °C ± 3 °C
• To apply voltage:
(1.1) 100 % of rated voltage for below range
RATED
CAP.
VOLTAGE RANGE
SIZE DIELECTRIC
0201 X5R/X7R
6.3 V, 10 V C  0.1 μF
0402 X5R/X7R
6.3 V, 10 V C  1 μF
0603 X5R/X7R
6.3 V, 10 V C  4.7 μF
0805 X5R/X7R
6.3 V
C  22 μF
1206 X5R/X7R
6.3 V
C  47 μF
(1.2) 6.3 V or C 10 μF: 150 % of rated voltage
(2)10 V UR < 500 V: 200 % of rated voltage
150 % of rated voltage for below range:
RATED
SIZE DIELECTRIC VOLTAGE
10 V, 16 V,
X5R/X7R
25 V
0402
Y5V
16 V
CAP.
RANGE
C  0.22 μF
C  0.47 μF
X5R/X7R
10 V, 16 V C  1.0 μF
0603
15) High
Y5V
16 V
C  2.2 μF
temp. load
X5R/X7R
10
V
C
 4.7 μF
(endurance) 0805
Y5V
16 V
C  4.7 μF
(3) 500 V: 150 % of rated voltage
(4) UR  630 V: 120 % of rated voltage
• Test time: 1000 h + 24 h/- 0 h
• Before measurement (class 2 only): Perform
150 °C + 0 °C/- 10 °C for 1 h and then set for
24 h ± 2 h at room temperature
• Measurement to be made after keeping at
room temperature for 24 h ± 2 h
Revision: 27-Mar-13
REQUIREMENTS
• No remarkable damage
• Capacitance change:
C0G (NP0): ± 3.0 % or ± 0.3 pF whichever is larger.
X7R, X5R:  10 V within ± 12.5 %; 6.3 V, with ± 25 %
Y5V:  10 V within ± 30 %; 6.3 V, within + 30 % to - 40 %
• Q/DF value:
C0G (NP0): More than 30 pF, Q  350
10 pF  C < 30 pF: Q275 C + 2.5 C;
Less than 10 pF: Q  200 C + 10 C
X5R, X7R:
RATED
DF 
EXCEPTION OF DF 
VOLTAGE
0201 (50 V); 0603  0.047 μF; 0805  0.18 μF;
6%
1206  0.47 μF
 50 V
3%
10 % 1210  4.7 μF
0603  1 μF; 0805  1 μF; 1206  2.2 μF;
20 % 1210  10 μF
35 V
5%
20 % 0805  2.2 μF; 1210  10 μF
10 % 0201  0.01 μF; 0805  1 μF; 1210  10 μF
14 % 0603  0.33 μF; 1206  4.7 μF
25 V
5%
0402  0.10 μF; 0603  0.47 μF; 0805  2.2 μF;
15 %
1206  6.8 μF; 1210  22 μF
10 % 0603  0.15 μF; 0805  0.68 μF; 1206  2.2 μF;
1210  4.7 μF
16 V
5%
0201  0.01 μF; 0402  0.033 μF; 0603  0.68 μF;
15 % 0805  2.2 μF; 1206  4.7 μF; 1210  22 μF
0201  0.012 μF; 0402  0.33 μF; 0603  0.33 μF;
15 %
0805  2.2 μF; 1206  2.2 μF; 1210  22 μF
10 V
7.5 %
20 % 0201  0.1 μF; 0402  1 μF
6.3 V
15 % 30 % 0201  0.1 μF; 0402  1 μF; 0603  10 μF;
0805  4.7 μF; 1206  47 μF; 1210  100 μF
4V
20 % Y5V:
RATED
EXCEPTION OF DF 
VOLTAGE DF 
 50 V
7.5 % 10 % 0603  0.1 μF; 0805  0.47 μF; 1206  4.7 μF
35 V
10 % 10 % 0402  0.047 μF; 0603  0.1 μF; 0805  0.33 μF;
1206  1 μF; 1210  4.7 μF
25 V
7.5 %
0402  0.068 μF; 0603  0.47 μF; 1206  4.7 μF;
15 % 1210  22 μF
12.5 % 0402  0.068 μF; 0603  0.68 μF
16 V
10 %
C < 1.0 μF
20 % 0402  0.22 μF
0603  2.2 μF; 0805  3.3 μF; 1206  10 μF;
16 V
12.5 % 20 %
1210  22 μF
C  1.0 μF
10 V
20 % 30 % 0402  0.47 μF
6.3 V
30 % • I. R.:  10 V: 1 G or 50 F whichever is smaller
CLASS 2 (X5R, X7R, Y5V):
INSULATION
RATED VOLTAGE
RESISTANCE
100 V: X7R
50 V: 0603  1 μF; 0805  1 μF; 1206  2.2 μF;
1210  4.7 μF
35 V: 0805  2.2 μF; 1210  10 μF
25 V: 0402  1 μF; 0603  2.2 μF; 0805  2.2 μF;
1 G or R x C  10 F
1206  10 μF; 1210  10 μF
whichever is less
16 V: 0402  0.22 μF; 0603  1 μF; 0805  2.2 μF;
1206  10 μF; 1210  47 μF
10 V: 0201  47 nF; 0402  0.47 μF; 0603  0.47 μF;
0805  2.2 μF; 1206  4.7 μF; 1210  47 μF
6.3 V; 4 V
Document Number: 28545
277
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Soldering and Footprint Design
www.vishay.com
Vishay
Surface Mount Multilayer Ceramic Chip Capacitors
for Commodity Applications
RECOMMENDED SOLDERING CONDITIONS
Lead (Pb)-free terminated MLCCs are not only used on SMT with lead (Pb)-free solder paste, but also suitable to be used with
lead-containing solder paste. In case the optimized solder joint is requested, increasing soldering time, temperature and
concentration of N2 within the oven are recommended.
SOLDERING PROFILES
Temperature in °C
Recommended IR reflow soldering profile for SMT process with SnAgCu series solder paste
280
260
240
220
200
180
160
140
120
100
80
60
40
20
Max. temp.
4 °C/s
4 °C/s
SnAgCu solder paste
3 °C/s
Min. temp.
Peak temperature: 280 °C max.
Duration time: > 260 °C,10 s max.
> 215 °C, 60 s to 90 s
Time
60 s to 90 s
120 s
120 s
120 s
Recommended wave soldering profile for SMT process with SnAgCu series solder
260 °C
Temperature in °C
250
200
150 °C/s max.
4 °C/s max.
150
120 °C
100
50
0
< 100 s
3 s to
5s
Time
Total contact
time
Over 60 s at least
by natural cooling
Revision: 01-Apr-11
Document Number: 45017
278
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VJ....W1BC Soldering and Footprint Design
www.vishay.com
Vishay
FOOTPRINT DESIGN
Circuit board design first steps are to consider how the surface mount board will be manufactured. The manufacturing process
determines the necessary dimensions of the solder land, the minimum spacing between components, the area underneath the
SMD where tracks may be laid down and the required component orientation during wave soldering. Therefore a footprint
related to the manufacturing process with all this information is an essential tool for SMD circuit board design.
Footprint details depend on following parameters:
• Component dimensions and tolerance as given in the component data
• Board dimensional accuracy
• Placement accuracy of the component with respect to the solder lands on the board
• Solder paste position tolerances with respect to the solder lands (for reflow soldering only)
• The soldering parameters
• Solder resist position tolerances with respect to the solder lands
• Solder joint parameters for reliable joints
TYPICAL SMD FOOTPRINT
E
Occupied area
G
D
Solder land/Solder paste pattern
Solder resist pattern
C
B
A
F
Tracks or Dummy tracks
(for wave soldering only)
REFLOW SOLDERING
SIZE
0201
0402
0603
0805
1206
1210
FOOTPRINT DIMENSIONS IN mm
A
B
C
D
E
F
G
0.65
1.50
2.30
2.80
4.00
4.00
0.23
0.50
0.70
1.00
2.20
2.20
0.21
0.50
0.80
0.90
0.90
0.90
0.30
0.50
0.80
1.30
1.60
2.50
n/a
0.10
0.20
0.40
1.60
1.60
0.90
1.75
2.55
3.05
4.25
4.25
0.60
0.95
1.40
1.85
2.25
3.15
PROCESSING
REMARKS
PLACEMENT
ACCURACY
Reflow or hot plate
soldering
± 0.05
± 0.15
± 0.25
± 0.25
± 0.25
± 0.25
PLACEMENT
ACCURACY
± 0.10
± 0.15
± 0.25
± 0.25
WAVE SOLDERING
FOOTPRINT DIMENSIONS IN mm
SIZE
0603
0805
1206
1210
A
B
C
D
E
F
G
PROPOSED NUMBER
AND DIMENSIONS OF
DUMMY TRACKS
2.40
3.20
4.80
5.30
1.00
1.40
2.30
2.30
0.70
0.90
1.25
1.50
0.80
1.30
1.70
2.60
0.20
0.36
1.25
1.25
3.10
4.10
5.90
6.30
1.90
2.50
3.20
4.20
1 x (0.20 x 0.80)
1 x (0.30 x 1.30)
3 x (0.25 x 1.70)
3 x (0.25 x 2.60)
FOOTPRINT FOR MLCC CHIP ARRAY
A
2.85 + 0.10/- 0.05
B
0.45 ± 0.05
D
0.80 ± 0.10
P
0.80
F
3.10 ± 0.30
Revision: 01-Apr-11
P
F
DIMENSIONS IN mm
D
SIZE
B
A
Document Number: 45017
279
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I SHAY I NTE RTE CHNO L O GY, IN C .
VISHAY PRODUCTS
SEMICONDUCTORS:
Rectifiers • High-Power Diodes and Thyristors • Small-Signal Diodes • Zener and Suppressor Diodes •
FETs • Optoelectronics • ICs • Modules
PASSIVE COMPONENTS:
Resistive Products • Magnetics • Capacitors
WORLD HEADQUARTERS
Vishay Intertechnology, Inc. | 63 Lancaster Avenue Malvern, PA 19355-2143 | USA
W O R L D W I D E S A L E S C O N TA C T S
Visit www.vishay.com for product information or select below for a current list of sales offices, representatives,
and distributors.
THE AMERICAS
EUROPE
UNITED STATES
GERMANY
VISHAY AMERICAS
ONE GREENWICH PLACE
SHELTON, CT 06484
UNITED STATES
PH: +1-402-563-6866
FAX: +1-402-563-6296
VISHAY ELECTRONIC GMBH
DR.-FELIX-ZANDMAN-PLATZ 1
95100 SELB
GERMANY
PH: +49-9287-71-0
FAX: +49-9287-70435
ASIA
FRANCE
SINGAPORE
VISHAY INTERTECHNOLOGY ASIA PTE LTD.
37A TAMPINES STREET 92 #07-00
SINGAPORE 528886
PH: +65-6788-6668
FAX: +65-6788-0988
VISHAY S.A.
199, BLVD DE LA MADELEINE
06003 NICE, CEDEX 1
FRANCE
PH: +33-4-9337-2727
FAX: +33-4-9337-2726
P.R. CHINA
UNITED KINGDOM
VISHAY CHINA CO., LTD.
15D, SUN TONG INFOPORT PLAZA
55 HUAI HAI WEST ROAD
SHANGHAI 200030
P.R. CHINA
PH: +86-21-5258 5000
FAX: +86-21-5258 7979
VISHAY LTD.
SUITE 7A, TOWER HOUSE
ST. CATHERINE’S COURT
SUNDERLAND ENTERPRISE PARK
SUNDERLAND SR5 3XJ
UNITED KINGDOM
PH: +44-191-516-8584
FAX: +44-191-549-9556
JAPAN
VISHAY JAPAN CO., LTD.
SHIBUYA PRESTIGE BLDG. 4F
3-12-22, SHIBUYA
SHIBUYA-KU
TOKYO 150-0002
JAPAN
PH: +81-3-5466-7150
FAX: +81-3-5466-7160
© Copyright 2015 Vishay Intertechnology, Inc.
® Registered trademarks of Vishay Intertechnology, Inc.
All rights reserved. Printed in Germany. Specifications subject to change without notice.
DATA BOOK
VSE-DB0097-1502
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000