VJ HIFREQ Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for High Frequency FEATURES • Case size 0402, 0603, 0805 • High frequency • Ultra-stable dielectric material • Lead (Pb)-free terminations code “X” • Tin/lead termination code “L” • Surface mount, wet build process • Reliable Noble Metal Electrode (NME) system • Made with a combination of design, materials and tight process control to achieve very high field reliability • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. APPLICATIONS • Broadband wireless communication • Satellite communication • WiFi (802.11) and WiMax (802.16) • VolP networks and cellular base stations • Subscriber based wireless devices ELECTRICAL SPECIFICATIONS Note • Electrical characteristics at 25 °C unless otherwise specified Operating Temperature: - 55 °C to + 125 °C Aging Rate: 0 % maximum per decade Capacitance Range: Insulation Resistance (IR): 0402: 1.0 pF to 82 pF At + 25 °C and rated voltage 100 000 M minimum or 1000 F, whichever is less 0603: 1.0 pF to 470 pF 0805: 1.0 pF to 1.5 nF Voltage Rating: 25 VDC to 250 VDC Temperature Coefficient of Capacitance (TCC): C0G (D): 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C with zero (0) VDC applied Dissipation Factor (DF): At + 125 °C and rated voltage 10 000 M minimum or 100 F, whichever is less Dielectric Strength Test: Performed per method 103 of EIA-198-2-E. Applied test voltages: 200 VDC-rated: Min. 250 % of rated voltage > 200 VDC-rated: Min. 200 % of rated voltage C0G (D): 0.05 % max. at 1.0 VRMS and 1 MHz for values 1000 pF C0G (D): 0.05 % max. at 1.0 VRMS and 1 kHz for values > 1000 pF Revision: 06-Jun-12 Document Number: 45071 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC D = HIFREQ CAPACITANCE MAXIMUM VOLTAGE (V) CASE MINIMUM MAXIMUM 0402 200 1.0 pF 82 pF 0603 250 1.0 pF 470 pF 0805 250 1.0 pF 1.5 nF Note • For values below 1.0 pF, contact [email protected] ORDERING INFORMATION VJ0603 D 1R0 B X B A C CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING (1) MARKING PACKAGING 0402 0603 0805 D = HIFREQ Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An “R” indicates a decimal point. Examples: 1R0 = 1.0 pF B = ± 0.10 pF C = ± 0.25 pF D = ± 0.50 pF F=±1% G=±2% J=±5% K = ± 10 % M = ± 20 % E = AgPd (2) X = Ni barrier 100 % tin plate matte finish N = Non-magnetic L = Ni barrier with tin lead plated finish min. 4 % lead X = 25 V A = 50 V B = 100 V C = 200 V P = 250 V A = No marking Note Details see selection chart T = 7" reel/plastic tape C = 7" reel/paper tape O = 7" reel/flamed paper tape J = 7" reel (low quantity) R = 11 1/4"/13" reel/ plastic tape P = 11 1/4"/13" reel/ paper tape I = 11 1/4"/13" reel/ flamed paper tape B = Bulk Note “I” and “O” is used for “E”/”N” termination code Notes (1) DC voltage rating should not be exceeded in application (2) Termination code “E” is for conductive epoxy assembly DIMENSIONS in inches (millimeters) W L T MAX. P CASE CODE TERMINATIONS PAD (P) STYLE LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 0402 VJ0402 0.040 ± 0.004 (1.02 ± 0.10) 0.020 ± 0.004 (0.51 ± 0.10) 0.021 (0.61) 0.004 (0.10) 0.016 (0.41) 0603 VJ0603 0.063 ± 0.006 (1.60 ± 0.15) 0.031 ± 0.005 (0.80 ± 0.12) 0.037 (0.94) 0.012 (0.30) 0.018 (0.46) 0805 VJ0805 0.079 ± 0.008 (2.00 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20) 0.057 (1.45) 0.010 (0.25) 0.028 (0.71) Revision: 06-Jun-12 Document Number: 45071 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC (VISHAY CODE) STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 1R0 1.0 pF 1R1 1.1 pF 1R2 1.2 pF 1R3 1.3 pF 1R4 1.4 pF 1R5 1.5 pF 1R6 1.6 pF 1R7 1.7 pF 1R8 1.8 pF 1R9 1.9 pF 2R0 2.0 pF 2R1 2.1 pF 2R2 2.2 pF 2R4 2.4 pF 2R7 2.7 pF 3R0 3.0 pF 3R3 3.3 pF 3R6 3.6 pF 3R9 3.9 pF 4R3 4.3 pF 4R7 4.7 pF 5R1 5.1 pF 5R6 5.6 pF 6R2 6.2 pF 6R8 6.8 pF 7R5 7.5 pF 8R2 8.2 pF 9R1 9.1 pF 100 10 pF 110 11 pF 120 12 pF 130 13 pF 150 15 pF 180 18 pF 200 20 pF 220 22 pF 240 24 pF 270 27 pF 300 30 pF 330 33 pF 360 36 pF 390 39 pF 430 43 pF 470 47 pF 510 51 pF 560 56 pF 620 62 pF 680 68 pF 750 75 pF 820 82 pF 910 91 pF 101 100 pF 111 110 pF 121 120 pF Note •• paper carrier and • plastic carrier tape Revision: 06-Jun-12 C0G (D) VJ0402 0402 25 X 50 A 100 B 200 C •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• TOLERANCE B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M Document Number: 45071 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC (VISHAY CODE) STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 1R0 1.0 pF 1R1 1.1 pF 1R2 1.2 pF 1R3 1.3 pF 1R4 1.4 pF 1R5 1.5 pF 1R6 1.6 pF 1R7 1.7 pF 1R8 1.8 pF 1R9 1.9 pF 2R0 2.0 pF 2R1 2.1 pF 2R2 2.2 pF 2R4 2.4 pF 2R7 2.7 pF 3R0 3.0 pF 3R3 3.3 pF 3R6 3.6 pF 3R9 3.9 pF 4R3 4.3 pF 4R7 4.7 pF 5R1 5.1 pF 5R6 5.6 pF 6R2 6.2 pF 6R8 6.8 pF 7R5 7.5 pF 8R2 8.2 pF 9R1 9.1 pF 100 10 pF 110 11 pF 120 12 pF 130 13 pF 150 15 pF 180 18 pF 200 20 pF 220 22 pF 240 24 pF 270 27 pF 300 30 pF 330 33 pF 360 36 pF 390 39 pF 430 43 pF 470 47 pF 510 51 pF 560 56 pF 620 62 pF 680 68 pF 750 75 pF 820 82 pF 910 91 pF Note •• paper carrier and • plastic carrier tape Revision: 06-Jun-12 C0G (D) 25 X 50 A VJ0603 0603 100 B •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • 200 C 250 P •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• TOLERANCE B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D B, C, D F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M F, G, J, K, M Document Number: 45071 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC (VISHAY CODE) STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 101 100 pF C0G (D) 25 X 50 A VJ0603 0603 100 B 200 C • 250 P TOLERANCE • • • 111 110 pF • • • F, G, J, K, M F, G, J, K, M 121 120 pF • • • F, G, J, K, M 131 130 pF • • • F, G, J, K, M 151 150 pF • • • 181 180 pF • • F, G, J, K, M 201 200 pF • • F, G, J, K, M 221 220 pF • • F, G, J, K, M 241 240 pF • • F, G, J, K, M 271 270 pF • • F, G, J, K, M 301 300 pF • • F, G, J, K, M 331 330 pF • • F, G, J, K, M 361 360 pF • F, G, J, K, M 391 390 pF • F, G, J, K, M 431 430 pF • F, G, J, K, M 471 470 pF • F, G, J, K, M 511 510 pF 561 560 pF 621 620 pF 681 680 pF 751 750 pF 821 820 pF 911 910 pF 102 1.0 nF 112 1.1 nF 122 1.2 nF 132 1.3 nF 152 1.5 nF F, G, J, K, M 182 1.8 nF Note •• paper carrier and • plastic carrier tape Revision: 06-Jun-12 Document Number: 45071 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE VJ0805 CASE CODE 0805 VOLTAGE (VDC) VOLTAGE CODE 25 50 100 200 250 X A B C P TOLERANCE CAP. CODE CAP. 1R0 1.0 pF •• •• •• •• •• B, C, D 1R1 1.1 pF •• •• •• •• •• B, C, D 1R2 1.2 pF •• •• •• •• •• B, C, D 1R3 1.3 pF •• •• •• •• •• B, C, D 1R4 1.4 pF •• •• •• •• •• B, C, D 1R5 1.5 pF •• •• •• •• •• B, C, D 1R6 1.6 pF •• •• •• •• •• B, C, D 1R7 1.7 pF •• •• •• •• •• B, C, D 1R8 1.8 pF •• •• •• •• •• B, C, D 1R9 1.9 pF •• •• •• •• •• B, C, D 2R0 2.0 pF •• •• •• •• •• B, C, D 2R1 2.1 pF •• •• •• •• •• B, C, D 2R2 2.2 pF •• •• •• •• •• B, C, D 2R4 2.4 pF •• •• •• •• •• B, C, D 2R7 2.7 pF •• •• •• •• •• B, C, D 3R0 3.0 pF •• •• •• •• •• B, C, D 3R3 3.3 pF •• •• •• •• •• B, C, D 3R6 3.6 pF •• •• •• •• •• B, C, D 3R9 3.9 pF •• •• •• •• •• B, C, D 4R3 4.3 pF •• •• •• •• •• B, C, D 4R7 4.7 pF •• •• •• •• •• B, C, D 5R1 5.1 pF •• •• •• •• •• B, C, D 5R6 5.6 pF •• •• •• •• •• B, C, D 6R2 6.2 pF •• •• •• •• •• B, C, D 6R8 6.8 pF •• •• •• •• •• B, C, D 7R5 7.5 pF •• •• •• •• •• B, C, D 8R2 8.2 pF •• •• •• •• •• B, C, D 9R1 9.1 pF •• •• •• •• •• B, C, D 100 10 pF •• •• •• •• •• F, G, J, K, M 110 11 pF •• •• •• •• •• F, G, J, K, M 120 12 pF •• •• •• •• •• F, G, J, K, M 130 13 pF •• •• •• •• •• F, G, J, K, M 150 15 pF •• •• •• •• •• F, G, J, K, M 180 18 pF •• •• •• •• •• F, G, J, K, M 200 20 pF •• •• •• •• •• F, G, J, K, M 220 22 pF •• •• •• •• •• F, G, J, K, M 240 24 pF •• •• •• •• •• F, G, J, K, M 270 27 pF •• •• •• •• •• F, G, J, K, M 300 30 pF •• •• •• •• •• F, G, J, K, M 330 33 pF •• •• •• •• •• F, G, J, K, M 360 36 pF •• •• •• •• •• F, G, J, K, M 390 39 pF •• •• •• •• •• F, G, J, K, M Note •• paper carrier and • plastic carrier tape Revision: 06-Jun-12 Document Number: 45071 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE VJ0805 CASE CODE 0805 VOLTAGE (VDC) VOLTAGE CODE 25 50 100 200 250 X A B C P TOLERANCE CAP. CODE CAP. 430 43 pF •• •• •• •• •• F, G, J, K, M 470 47 pF •• •• •• •• •• F, G, J, K, M 510 51 pF •• •• •• •• •• F, G, J, K, M 560 56 pF •• •• •• •• •• F, G, J, K, M 620 62 pF •• •• •• •• •• F, G, J, K, M 680 68 pF •• •• •• •• •• F, G, J, K, M 750 75 pF •• •• •• •• •• F, G, J, K, M 820 82 pF •• •• •• •• •• F, G, J, K, M 910 91 pF •• •• •• •• •• F, G, J, K, M 101 100 pF • • • • • F, G, J, K, M 111 110 pF • • • • • F, G, J, K, M 121 120 pF • • • • • F, G, J, K, M 131 130 pF • • • • • F, G, J, K, M 151 150 pF • • • • • F, G, J, K, M 181 180 pF • • • • • F, G, J, K, M 201 200 pF • • • • • F, G, J, K, M 221 220 pF • • • • • F, G, J, K, M 241 240 pF • • • • • F, G, J, K, M 271 270 pF • • • • • F, G, J, K, M 301 300 pF • • • • • F, G, J, K, M 331 330 pF • • • • • F, G, J, K, M 361 360 pF • • • • 391 390 pF • • • • 430 430 pF • • • F, G, J, K, M 471 470 pF • • • F, G, J, K, M 511 510 pF • • • F, G, J, K, M 561 560 pF • • • F, G, J, K, M 621 620 pF • • • F, G, J, K, M 681 680 pF • • • 751 750 pF • • F, G, J, K, M 821 820 pF • • F, G, J, K, M 911 910 pF • • F, G, J, K, M 102 1.0 nF • • F, G, J, K, M 112 1.1 nF • F, G, J, K, M 122 1.2 nF • F, G, J, K, M 132 1.3 nF • F, G, J, K, M 152 1.5 nF • F, G, J, K, M 182 1.8 nF F, G, J, K, M F, G, J, K, M F, G, J, K, M Note •• paper carrier and • plastic carrier tape Revision: 06-Jun-12 Document Number: 45071 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS TEMPERATURE COEFFICIENT OF CAPACITANCE MIN. INSULATION RESISTANCE VS. TEMPERATURE 10 000 1.5 INSULATION RESISTANCE (ΩF) % CAPACITANCE CHANGE 2.0 1.0 1000 0.5 0.0 - 0.5 NP0 100 - 1.0 - 1.5 - 2.0 - 75 - 50 - 25 0 25 10 75 100 125 150 175 50 10 25 TEMPERATURE °C 0.2 % CAPACITANCE CHANGE % CAPACITANCE CHANGE 150 VOLTAGE COEFFICIENT OF CAPACITANCE AGING RATE 0.2 50 100 TEMPERATURE °C 0.1 0.0 - 0.1 0.1 0.0 - 0.1 - 0.2 - 0.2 1 10 100 1000 0 10 000 10 20 TYPICAL Q VALUE VS. FREQUENCY SIZE 0402 10 000 30 40 50 60 70 80 90 100 DC VOLTS APPLIED HOURS TYPICAL ESR VS. FREQUENCY SIZE 0402 1 1 pF 1000 1 pF ESR (Ω) Q 15 pF 100 27 pF 0.1 82 pF 15 pF 27 pF 82 pF 10 1 0.01 100 1000 100 1000 FREQUENCY (MHz) TYPICAL SRF/PRF VS. CAPACITANCE SIZE 0402 100 SRF/PRF (GHz) FREQUENCY (MHz) 10 PRF SRF 1 1 Revision: 06-Jun-12 10 CAPACITANCE (pF) 100 Document Number: 45071 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS TYPICAL Q VALUE VS. FREQUENCY SIZE 0603 10 000 1 pF 1000 1 pF 100 ESR (Ω) 4.7 pF Q TYPICAL ESR VS. FREQUENCY SIZE 0603 1 470 pF 4.7 pF 0.1 470 pF 10 100 pF 100 pF 0.01 1 100 100 1000 1000 FREQUENCY (MHz) FREQUENCY (MHz) TYPICAL SRF/PRF VS. CAPACITANCE SIZE 0603 SRF/PRF (GHz) 100 10 PRF SRF 1 0.1 1 TYPICAL Q VALUE VS. FREQUENCY SIZE 0805 10 000 1000 TYPICAL ESR VS. FREQUENCY SIZE 0805 1 1 pF 1 pF ESR (Ω) 1000 Q 10 100 CAPACITANCE (pF) 100 680 pF 680 pF 0.1 330 pF 10 330 pF 1 0.01 100 1000 100 1000 FREQUENCY (MHz) FREQUENCY (MHz) TYPICAL SRF/PRF VS. CAPACITANCE SIZE 0805 SRF/PRF (GHz) 100 10 SRF PRF 1 0.1 1 Revision: 06-Jun-12 10 100 1000 CAPACITANCE (pF) 10 000 Document Number: 45071 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ HIFREQ Series www.vishay.com Vishay Vitramon STANDARD PACKAGING QUANTITIES (1)(2)(3) 7" REEL QUANTITIES CASE CODE TAPE SIZE PAPER TAPE PACKAGING CODE “C”/“O” 11 1/4" AND 13" REEL QUANTITIES PLASTIC TAPE PACKAGING CODE “T” LOW QUANTITY “J” (5) PAPER TAPE PACKAGING CODE “P”/“I” PLASTIC TAPE PACKAGING CODE “R” 0402 8 mm 5000 n/a 1000 10 000 n/a 0603 (4) 8 mm 4000 4000 1000 10 000 10 000 0805 (4) 8 mm 3000 3000 1000 10 000 10 000 Notes (1) Vishay Vitramon uses embossed plastic carrier tape (2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (3) n/a = Not available (4) Packaging “C”/”P”/”O”/”I” and “T”/”R” or lower quantities can depend from product thickness (5) Paper/plastic tape used by availability STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to + 40 °C ambient temperature and 70 % related humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Revision: 06-Jun-12 Document Number: 45071 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000