Edgeboard Connectors

VISHAY I N T E R T E C H N O L O G Y , I N C .
INTERACTIVE
data book
EDGEBOARD CONNECTORS
vishay DALE
vsE-db0034-0907
Notes:
1.
To navigate:
a) Click on the Vishay logo on any datasheet to go to the Contents page for that section. Click on the Vishay logo on any Contents
page to go to the main Table of Contents page.
b) Click on the products within the Table of Contents to go directly
to the datasheet.
c) Use the scroll or page up/page down functions.
d) Use the Adobe ® Acrobat ® page function in the browser bar.
2.
To search the text of the catalog use the Adobe ® Acrobat ® search function.
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
V I S H AY I N T E R T E C H N O L O G Y, I N C .
DATA B O O K
EdgeboArd Connectors
Dual Readout
Single Readout
Burn In Connectors
Cross Reference
w w w. v i s h a y. c o m
SEMICONDUCTORS
Rectifiers
Schottky (single, dual)
Standard, Fast, and Ultra-Fast Recovery
(single, dual)
Bridge
Superectifier ®
Sinterglass Avalanche Diodes
High-Power Diodes and Thyristors
High-Power Fast-Recovery Diodes
Phase-Control Thyristors
Fast Thyristors
P rod u ct L istings
Small-Signal Diodes
Schottky and Switching (single, dual)
Tuner/Capacitance (single, dual)
Bandswitching
PIN
Zener and Suppressor Diodes
Zener (single, dual)
TVS (TRANSZORB®, Automotive, ESD, Arrays)
Optoelectronics
IR Emitters and Detectors,
and IR Receiver Modules
Optocouplers and Solid-State Relays
Optical Sensors
LEDs and 7-Segment Displays
Infrared Data Transceiver Modules
Custom Products
ICs
Power ICs
Analog Switches
RF Transmitter and Receiver Modules
ICs for Optoelectronics
Modules
Power Modules (contain power diodes,
thyristors, MOSFETs, IGBTs)
DC/DC Converters
FETs
Low-Voltage TrenchFET® Power MOSFETs
High-Voltage TrenchFET® Power MOSFETs
High-Voltage Planar MOSFETs
JFETs
Passive Components
Resistive Products
Foil Resistors
Film Resistors
Metal Film Resistors
Thin Film Resistors
Thick Film Resistors
Metal Oxide Film Resistors
Carbon Film Resistors
Wirewound Resistors
Power Metal Strip® Resistors
Chip Fuses
Variable Resistors
Cermet Variable Resistors
Wirewound Variable Resistors
Conductive Plastic Variable Resistors
Networks/Arrays
Non-Linear Resistors
NTC Thermistors
PTC Thermistors
Varistors
Magnetics
Inductors
Transformers
Capacitors
Tantalum Capacitors
Molded Chip Tantalum Capacitors
Coated Chip Tantalum Capacitors
Solid Through-Hole Tantalum Capacitors
Wet Tantalum Capacitors
Ceramic Capacitors
Multilayer Chip Capacitors
Disc Capacitors
Film Capacitors
Power Capacitors
Heavy-Current Capacitors
Aluminum Capacitors
Silicon RF Capacitors
Strain Gage Transducers
and Stress Analysis Systems
PhotoStress®
Strain Gages
Load Cells
Force Transducers
Instruments
Weighing Systems
Specialized Strain Gage Systems
Edgeboard Connectors
Vishay Dale
1505 E. Highway 50
P.O. Box 180
Yankton, SD 57078-0180, USA
Phone: +1 605 665 9301
Fax: +1 605 665 1627
www.vishay.com
DISCLAIMER
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Table of Contents
Vishay Dale
Edgeboard Connectors
EB4 ...................................................................................................................................................................................
EB6 ...................................................................................................................................................................................
EB7D .................................................................................................................................................................................
EB7S .................................................................................................................................................................................
EB8 ...................................................................................................................................................................................
EBT156 .............................................................................................................................................................................
EB4, EB6, EB7, EB8 .........................................................................................................................................................
2
5
8
11
14
17
20
COMPETITOR PRODUCTS CROSS-REFERENCED
Methode ............................................................................................................................................................................
Amphenol ..........................................................................................................................................................................
Winchester ........................................................................................................................................................................
Elco ...................................................................................................................................................................................
Micro Plastics ....................................................................................................................................................................
Edac ..................................................................................................................................................................................
Holmberg ...........................................................................................................................................................................
Teka ..................................................................................................................................................................................
Viking ................................................................................................................................................................................
Sullins ................................................................................................................................................................................
Cinch .................................................................................................................................................................................
Revision: 16-Feb-09
27
28
28
29
29
30
31
32
33
34
35
www.vishay.com
1
EB4
Vishay Dale
Edgeboard Connectors, Dual Readout, 0.100" (2.54 mm) C-C,
Standard and Right Angle Terminals
FEATURES
ELECTRICAL SPECIFICATIONS
Current Rating: 3 A
Test Voltage Between Contacts:
At sea level: 650 VRMS
At 70 000 feet (21 336 meters): 275 VRMS
Insulation Resistance: 5000 MΩ minimum at 500 VDC
potential
Contact Resistance: 30 mV maximum at rated current (with
gold plating)
Operating Temperature: - 65 °C to + 125 °C
Humidity: 96 h at 90 % relative humidity at + 40 °C, dried at
room temperature for 3 h minimum, insulation resistance
was greater than 5000 MΩ
Durability: After 500 cycles of insertion and withdrawal of a
0.070" (1.78 mm) thick steel test board, contact resistance
less than 0.030 V at 3 A on gold plated contacts and
individual contact pair separation force when measured with
a 0.054" (1.37 mm) thick steel test blade was greater than
½ oz.
Shock: Three 50G shocks in each of 3 mutually
perpendicular planes with no loss of continuity
Vibration: 2 h in each of 3 mutually perpendicular planes,
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
with no loss of continuity
• Grid Patterns: 0.100" C-C x 0.150" (2.54 mm x 3.81 mm)
and 0.100" C-C x 0.200" (2.54 mm x 5.08 mm)
• Standard and right angle terminals
• Greater design latitude:
4 body materials: Diallyl phthalate, phenolic, glass-filled
polyester and glass-filled polyphenylene sulfied
7 contact termination styles - 3 standard, 4 right angle
20 body sizes and 6 mounting styles
• Selective gold plating
• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without
loss of contact position.
• Recognized under the Component Program of
Underwriters Laboratories, Inc. listed under file
E65524, project 77CH3889
APPLICATIONS
For use with 0.0625" (1.59 mm) printed circuit boards
requiring an edgeboard type connector on 0.100" (2.54 mm)
centers
MATERIAL SPECIFICATIONS
Body Material:
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F
green, flame retardant (UL 94 V-0)
“2” glass-filled phenolic per MIL-M-14, Type MFH dark
green, flame retardant (UL 94 V-0)
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94 V-0)
”5” thermoplastic polyphenylene sulfied, glass filled, brown,
flame retardant (UL 94 V-0)
Contacts: Phosphor bronze (See Ordering Information)
Polarizing Key: Glass reinforced nylon, flame retardant
(UL 94H-B)
Plating: Gold (See Ordering Information)
ORDERING INFORMATION
EB4
MODEL
3
K
20
SG
X
15
MOUNTING
POLARIZING
CONTACT PLATING
STANDARD CONTACTS
VARIATIONS
PER SIDE
TERMINAL
KEY POSITIONS
SG = Selective gold plating (0.00003"
VARIATIONS
6, 10, 12, (0.000762 mm) minimum thick) on contact
Key(s) are located to
1 = Diallyl
area with gold flash on terminal.
15, 18, 20,
C, D, K,
right of position(s)
Phthalate
SGF = Selective gold plating (0.000010"
22, 25, 28,
1R, 2R,
designated. Use odd2 = Phenolic
30, 31, 35, (0.000254 mm) minimum thick) on contact
3R, 4R
numbered contact for
3 = Glass-filled
area with gold flash on terminal.
36, 40, 43,
ordering: -1, -3, -5, etc.
Polyester
All gold plating over 0.00005"
44, 48, 49,
Required only when
5 = Glass-filled
(0.00127 mm) minimum nickel underplate.
50, 60,
polarizing keys are to be
Polyphenylene
Contact factory for additional plating
and 65
factory installed.
Sulfied
options.
Note: To order polarizing
keys individually, specify
model PK-4.
BODY
MATERIAL
www.vishay.com
2
For technical questions, contact: [email protected]
Document Number: 36001
Revision: 16-Feb-09
EB4
Edgeboard Connectors, Dual Readout, 0.100" (2.54 mm) C-C,
Standard and Right Angle Terminals
Vishay Dale
DIMENSIONS in inches (millimeters)
0.060
(1.52)
R Typ.
0.342
(8.69)
Typ.
0.050
(1.27)
Typ.
0.287
(7.29)
A
B
C
0.100
(2.54)
Typ.
D
E
J
J
0.060
(1.52)
Typ.
0.054 - 0.071 (1.37 - 1.80)
Card Thickness
0.125
(3.17)
Point of
Contact
See table for
contact and
mounting variations
0.250
(6.35)
Typ.
Section J - J
0.180
(4.57)
Typ.
0.430
(10.92)
Typ.
0.610 (15.49)
Typ.
0.300 (7.62)
Depth of
Insertion
0.365
(9.27)
0.150 (3.81)
Polarizing Key:
When ordering polarizing keys individually, 0.295
specify by the Model Number:
(7.49)
PK-4 between contacts. Hand insertion tool,
TPK-4, provided upon request.
0.200
(5.08)
# OF CONTACT
POSITIONS
PER SIDE
0.031
(0.787)
0.096 ± 0.002
(2.44 ± 0.051)
A
B
C
D
E
6
1.435 (36.45)
1.175 (29.85)
0.700 (17.78)
0.860 (21.84)
0.750 (19.05)
10
1.835 (46.61)
1.575 (40.00)
1.100 (27.94)
1.260 (32.00)
1.150 (29.21)
12
2.035 (51.69)
1.775 (45.08)
1.300 (33.02)
1.460 (37.08)
1.350 (34.29)
15
2.335 (59.31)
2.075 (52.70)
1.600 (40.64)
1.760 (44.70)
1.650 (41.91)
18
2.635 (66.93)
2.375 (60.32)
1.900 (48.26)
2.060 (52.32)
1.950 (49.53)
20
2.835 (72.01)
2.575 (65.40)
2.100 (53.34)
2.260 (57.40)
2.150 (54.61)
22
3.035 (77.09)
2.775 (70.48)
2.300 (58.42)
2.460 (62.48)
2.350 (59.69)
25
3.335 (84.71)
3.075 (78.10)
2.600 (66.04)
2.760 (70.10)
2.650 (67.31)
28
3.635 (92.33)
3.375 (85.72)
2.900 (73.66)
3.060 (77.72)
2.950 (74.93)
30
3.835 (97.41)
3.575 (90.80)
3.100 (78.74)
3.260 (82.80)
3.150 (80.01)
31
3.935 (99.95)
3.675 (93.34)
3.200 (81.28)
3.360 (85.34)
3.250 (82.55)
35
4.335 (110.11)
4.075 (103.50)
3.600 (91.44)
3.760 (95.50)
3.650 (92.71)
36
4.435 (112.65)
4.175 (106.04)
3.700 (93.98)
3.860 (98.04)
3.750 (95.25)
40
4.835 (122.81)
4.575 (116.20)
4.100 (104.14)
4.260 (108.20)
4.150 (105.41)
43
5.135 (130.43)
4.875 (123.82)
4.400 (111.76)
4.560 (115.82)
4.450 (113.03)
44
5.235 (132.97)
4.975 (126.36)
4.500 (114.30)
4.660 (118.36)
4.550 (115.57)
48
5.635 (143.13)
5.375 (136.52)
4.900 (124.46)
5.060 (128.52)
4.950 (125.73)
49
5.735 (145.67)
5.475 (139.06)
5.000 (127.00)
5.160 (131.06)
5.050 (128.27)
50
5.835 (148.21)
5.575 (141.60)
5.100 (129.54)
5.260 (133.60)
5.150 (130.81)
60
6.835 (173.61)
6.575 (167.00)
6.100 (154.94)
6.260 (159.00)
6.150 (156.21)
65
7.335 (186.31)
7.075 (179.70)
6.600 (167.64)
6.760 (171.70)
6.650 (168.91)
Document Number: 36001
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
3
EB4
Vishay Dale
Edgeboard Connectors, Dual Readout, 0.100" (2.54 mm) C-C,
Standard and Right Angle Terminals
PHYSICAL SPECIFICATIONS
Type “3R” - dip solder, 0.025" (0.635 mm) square terminals,
0.180" (4.57 mm) nominal terminal length x 0.150" (3.81 mm)
nominal terminal row spacing
Contact Type: Bifurcated cantilever beam
Number of Contacts: 10, 12, 15, 18, 20, 22, 25, 28, 30, 31,
35, 36, 40, 43, 44, 48, 49, 50, 60 and 65 per side
Type “4R” - dip solder, 0.025" (0.635 mm) square terminals,
0.180" (4.57 mm) nominal terminal length x 0.200" (5.08 mm)
nominal terminal row spacing
Contact Terminal Variation: Standard terminals
Type “C” - dip solder, 0.025" (0.635 mm) square terminals,
0.175" (4.44 mm) nominal terminal length below standoffs
Contact Spacing: 0.100" (2.54 mm) center to center
Type “D” - dip solder, 0.025" (0.635 mm) square terminals,
0.115" (2.92 mm) nominal terminal length below standoffs
Contact Terminal Row Spacing: Standard - 0.200"
(5.08 mm) nominal. Right angle - 0.200" (5.08 mm) nominal
and 0.150" (3.81 mm) nominal
Type “K” - Wire Wrap™, 0.025" (0.635 mm) square
terminals, 0.570" (14.48 mm) nominal terminal length below
standoffs
Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)
Contact Terminal Variation: Right angle terminals
Card Slot Depth: 0.300" (7.62 mm)
Type “1R” - dip solder, 0.025" (0.635 mm) square terminals,
0.120" (3.05 mm) nominal terminal length x 0.150" (3.81 mm)
nominal terminal row spacing
Connector Polarization: Between contact polarization
key(s) are located to the right of the contact position(s)
designated
Type “2R” - dip solder, 0.025" (0.635 mm) square terminals,
0.120" (3.05 mm) nominal terminal length x 0.200" (5.08 mm)
nominal terminal row spacing
Note
• High temperature burn-in, edgeboard connectors, with 0.100"
(2.54 mm) center to center are on www.vishay.com/doc?36006
MOUNTING VARIATIONS in inches (millimeters)
Type “X”
Clearance Hole
Raised Mounting Flange
Type “XF”
Clearance Hole
Flush Mounting Flange
0.060 (1.52) Ref.
Type “XFS”
Right Angle
Mounting Flange
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.125
(3.17)
Dia.
0.125
(3.17)
Dia.
0.430
(10.92)
Type “XS”
Right Angle
Mounting Flange
0.125
(3.17)
Dia.
0.250
(6.35)
0.610
(15.49)
Ref.
Type “Y”
Threaded Insert
Raised Mounting Flange
0.250
(6.35)
0.125 (3.17)
0.250 (6.35)
0.610
(15.49)
Ref.
0.610
(15.49)
Ref.
Type “W”
No Mounting Flange
Type “YF”
Threaded Insert
Flush Mounting Flange
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.180 (4.57)
4-40
UNC-2B
0.430
(10.92)
0.125
(3.17)
0.430
(10.92)
0.250
(6.35)
0.610
(15.49)
Ref.
0.125
(3.17)
Dia.
0.250
(6.35)
4-40
UNC-2B
0.610
(15.49)
Ref.
0.610
(15.49)
Ref.
0.430
(10.92)
0.610
(15.49)
Ref.
0.250
(6.35)
TERMINAL VARIATIONS in inches (millimeters)
Type “C” and “D”
Solder Dip, Standard
0.025 (0.635) Square Terminals
0.200
(5.08)
Type “K”
Wire Wrap™, Standard
0.025 (0.635) Square Terminals
0.200 (5.08)
To Fit
0.050 ± 0.002
(1.27 ± 0.051)
Dia. Eyelet
“C” = 0.175 (4.44)
“D” = 0.115 (2.92)
www.vishay.com
4
Type “1R”, “2R”, “3R” and “4R”
Right Angle
0.025 (0.635) Square Terminals
B
0.150 0.120 ± 0.030
(3.81) (3.05 ± 0.762)
2R
0.200 0.120 ± 0.030
(5.08) (3.05 ± 0.762)
3R
0.150 0.180 ± 0.030
(3.81) (4.57 ± 0.762)
4R
0.200 0.180 ± 0.030
(5.08) (4.57 ± 0.762)
A
For technical questions, contact: [email protected]
A
1R
B
0.590
(14.99)
0.570 (14.48)
TYPE
Document Number: 36001
Revision: 16-Feb-09
EB6
Vishay Dale
Edgeboard Connectors, Dual Readout, 0.125" (3.17 mm) C-C,
Standard and Right Angle Terminals
FEATURES
ELECTRICAL SPECIFICATIONS
Current Rating: 3 A
Test Voltage Between Contacts:
At sea level: 1500 VRMS
At 70 000 feet (21 336 meters): 325 VRMS
Insulation Resistance: 5000 MΩ minimum at 500 VDC
potential
Contact Resistance: 30 mV maximum at rated current (with
gold plating)
Operating Temperature: - 65 °C to + 125 °C
Humidity: 96 h at 90 % relative humidity at + 40 °C, dried at
room temperature for 3 h minimum, insulation resistance
was greater than 5000 MΩ
Durability: After 500 cycles of insertion and withdrawal of a
0.070" (1.78 mm) thick steel test board, contact resistance
less than 0.030 V at 3 A on gold plated contacts and
individual contact pair separation force when measured with
a 0.054" (1.37 mm) thick steel test blade was greater than
½ oz.
Shock: Three 50G shocks in each of 3 mutually
perpendicular planes with no loss of continuity
Vibration: 2 h in each of 3 mutually perpendicular planes,
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
with no loss of continuity
• Grid Patterns: 0.125" C-C x 0.150" (3.17 mm x 3.81 mm),
0.125" C-C x 0.200" (3.17 mm x 5.08 mm) and
0.125" C-C x 0.250" (3.17 mm x 6.35 mm)
• Standard and right angle terminals
• Greater design latitude:
4 body materials: Diallyl phthalate, phenolic, glass-filled
polyester and glass-filled polyphenylene sulfied
7 contact termination styles - 3 standard, 4 right angle
19 body sizes and 6 mounting styles
• Selective gold plating
• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without
loss of contact position.
• Recognized under the Component Program of
Underwriters Laboratories, Inc. listed under file
E65524, project 77CH3889
APPLICATIONS
For use with 0.0625" (1.59 mm) printed circuit boards
requiring an edgeboard type connector on 0.125" (3.17 mm)
centers
MATERIAL SPECIFICATIONS
Body Material:
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F
green, flame retardant (UL 94 V-0)
“2” glass-filled phenolic per MIL-M-14, Type MFH dark
green, flame retardant (UL 94 V-0)
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94 V-0)
”5” thermoplastic polyphenylene sulfied, glass filled, brown,
flame retardant (UL 94 V-0)
Contacts: Phosphor bronze (See Ordering Information)
Polarizing Key: Glass reinforced nylon, flame retardant
(UL 94H-B)
Plating: Gold (See Ordering Information)
ORDERING INFORMATION
EB6
MODEL
3
K
40
SG
X
15
MOUNTING
POLARIZING
CONTACT PLATING
STANDARD CONTACTS
VARIATIONS
PER SIDE
TERMINAL
KEY POSITIONS
SG = Selective gold plating (0.00003"
VARIATIONS
6, 10, 12, (0.000762 mm) minimum thick) on contact
1 = Diallyl
Key(s) are located to
area with gold flash on terminal.
14, 15, 18,
C, D, K,
Phthalate
right of position(s)
SGF = Selective gold plating (0.000010"
22, 24, 25,
1R, 2R,
2 = Phenolic
designated. Use odd28, 30, 31, (0.000254 mm) minimum thick) on contact
3R, 4R
3 = Glass-filled
numbered contact for
area with gold flash on terminal.
32, 35, 36,
Polyester
ordering: -1, -3, -5, etc.
All gold plating over 0.00005"
40, 43, 44,
5 = Glass-filled
Required only when
49, and 50 (0.00127 mm) minimum nickel underplate.
Polyphenylene
polarizing keys are to be
Contact factory for additional plating
Sulfied
factory installed.
options.
Note: To order polarizing
keys individually, specify
Model PK-6.
BODY
MATERIAL
Document Number: 36002
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
5
EB6
Edgeboard Connectors, Dual Readout, 0.125" (3.17 mm) C-C,
Standard and Right Angle Terminals
Vishay Dale
DIMENSIONS in inches (millimeters)
0.060
(1.52)
R Typ.
0.060
(1.52)
Typ.
0.260
(6.60)
0.340
(8.64)
Typ.
A
B
C
0.125
(3.17)
Typ.
D
E
J
J
0.060
(1.52)
Typ.
0.250
(6.35)
Typ.
Section J - J
0.054 - 0.071 (1.37 - 1.80)
Card Thickness
0.125 (3.17)
Point of
Contact
0.430
(10.92)
Typ.
0.610 (15.49)
Typ.
0.300 (7.62)
Depth of
Insertion
0.365
(9.27)
0.180
(4.57)
Typ.
0.150 (3.81)
Polarizing Key:
When ordering polarizing keys individually, 0.295
(7.49)
specify by the Model Number:
PK-6 between contacts. Hand insertion tool,
TPK-6, provided upon request.
0.250
(6.35)
# OF CONTACT
POSITIONS
PER SIDE
A
0.031
(0.787)
0.096 ± 0.002
(2.44 ± 0.050)
B
C
D
E
6
1.555 (39.50)
1.295 (32.89)
0.875 (22.22)
1.035 (26.29)
0.875 (22.22)
10
2.055 (52.20)
1.795 (45.59)
1.375 (34.92)
1.535 (38.99)
1.375 (34.92)
12
2.305 (58.55)
2.045 (51.94)
1.625 (41.28)
1.785 (45.34)
1.625 (41.28)
14
2.555 (64.90)
2.295 (58.29)
1.875 (47.62)
2.035 (51.69)
1.875 (47.62)
15
2.680 (68.07)
2.420 (61.47)
2.000 (50.80)
2.160 (54.86)
2.000 (50.80)
18
3.055 (77.60)
2.795 (70.99)
2.375 (60.32)
2.535 (64.39)
2.375 (60.32)
22
3.555 (90.30)
3.295 (83.69)
2.875 (73.02)
3.035 (77.09)
2.875 (73.02)
24
3.805 (96.65)
3.545 (90.04)
3.125 (79.38)
3.285 (83.44)
3.125 (79.38)
25
3.930 (99.82)
3.670 (93.22)
3.250 (82.55)
3.410 (86.61)
3.250 (82.55)
28
4.305 (109.35)
4.045 (102.74)
3.625 (92.08)
3.785 (96.14)
3.625 (92.08)
30
4.555 (115.70)
4.295 (109.09)
3.875 (98.42)
4.035 (102.49)
3.875 (98.42)
31
4.680 (118.87)
4.420 (112.27)
4.000 (101.60)
4.160 (105.66)
4.000 (101.60)
32
4.805 (122.05)
4.545 (115.44)
4.125 (104.78)
4.285 (108.84)
4.125 (104.78)
35
5.180 (131.57)
4.920 (124.97)
4.500 (114.30)
4.660 (118.36)
4.500 (114.30)
36
5.305 (134.75)
5.045 (128.14)
4.625 (117.48)
4.785 (121.54)
4.625 (117.48)
40
5.805 (147.45)
5.545 (140.84)
5.125 (130.18)
5.285 (134.24)
5.125 (130.18)
43
6.180 (156.97)
5.920 (150.37)
5.500 (139.70)
5.660 (143.76)
5.500 (139.70)
44
6.305 (160.15)
6.045 (153.54)
5.625 (142.88)
5.785 (146.94)
5.625 (142.88)
49
6.930 (176.02)
6.670 (169.42)
6.250 (158.75)
6.410 (162.81)
6.250 (158.75)
50
7.055 (179.20)
6.795 (172.59)
6.375 (161.92)
6.535 (165.99)
6.375 (161.92)
www.vishay.com
6
For technical questions, contact: [email protected]
Document Number: 36002
Revision: 16-Feb-09
EB6
Edgeboard Connectors, Dual Readout, 0.125" (3.17 mm) C-C,
Standard and Right Angle Terminals
Vishay Dale
PHYSICAL SPECIFICATIONS
Type “3R” - dip solder, 0.025" (0.635 mm) square terminals,
0.180" (4.57 mm) nominal terminal length x 0.150" (3.81 mm)
nominal terminal row spacing
Contact Type: Bifurcated cantilever beam
Number of Contacts: 6, 10, 12, 14, 15, 18, 22, 24, 25, 28,
30, 31, 32, 35, 36, 40, 43, 44, 49, and 50 per side
Type “4R” - dip solder, 0.025" (0.635 mm) square terminals,
0.180" (4.57 mm) nominal terminal length x 0.200" (5.08 mm)
nominal terminal row spacing
Contact Terminal Variation: Standard terminals
Type “C” - dip solder, 0.025" (0.635 mm) square terminals,
0.175" (4.44 mm) nominal terminal length below standoffs
Contact Spacing: 0.125" (3.17 mm) center to center
Type “D” - dip solder, 0.025" (0.635 mm) square terminals,
0.115" (2.92 mm) nominal terminal length below standoffs
Contact Terminal Row Spacing: Standard - 0.250"
5.08 mm) nominal. Right angle - 0.200" (5.08 mm) nominal
and 0.150" (3.81 mm) nominal
Type “K” - Wire Wrap™, 0.025" (0.635 mm) square
terminals, 0.570" (14.48 mm) nominal terminal length below
standoffs
Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)
Contact Terminal Variation: Right angle terminals
Card Slot Depth: 0.300" (7.62 mm)
Type “1R” - dip solder, 0.025" (0.635 mm) square terminals,
0.120" (3.05 mm) nominal terminal length x 0.150" (3.81 mm)
nominal terminal row spacing
Connector Polarization: Between contact polarization
key(s) are located to the right of the contact position(s)
designated
Type “2R” - dip solder, 0.025" (0.635 mm) square terminals,
0.120" (3.05 mm) nominal terminal length x 0.200" (5.08 mm)
nominal terminal row spacing
Note
• High temperature burn-in, edgeboard connectors, with 0.125"
(3.17 mm) center to center are on www.vishay.com/doc?36006
MOUNTING VARIATIONS in inches (millimeters)
Type “X”
Clearance Hole
Raised Mounting Flange
Type “XF”
Clearance Hole
Flush Mounting Flange
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.125
(3.17)
Dia.
0.430
(10.92)
0.060 (1.52) Ref.
0.125
(3.17)
Dia.
0.250
(6.35)
0.610
(15.49) Ref.
Type “Y”
Threaded Insert
Raised Mounting Flange
0.610
(15.49) Ref.
0.060 (1.52) Ref.
0.125
(3.17)
Dia.
0.125
(3.17)
Dia.
0.125
(3.17)
0.430
(10.92)
0.250
(6.35)
0.250
(6.35)
0.125 (3.17)
0.250 (6.35)
0.610
(15.49) Ref.
0.610
(15.49) Ref.
Type “W”
No Mounting Flange
Type “YF”
Threaded Insert
Flush Mounting Flange
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.060 (1.52) Ref.
0.205 (5.21)
4-40
UNC-2B
0.430
(10.92)
Type “XFS”
Right Angle
Mounting Flange
Type “XS”
Right Angle
Mounting Flange
0.250
(6.35)
4-40
UNC-2B
0.610
(15.49) Ref.
0.610
(15.49)
Ref.
0.430
(10.92)
0.610
(15.49)
Ref.
0.250
(6.35)
TERMINAL VARIATIONS in inches (millimeters)
Type “C” and “D”
Solder Dip, Standard
0.025 (0.635) Square Terminals
0.250
(6.35)
“C” = 0.175 (4.44)
“D” = 0.115 (2.92)
Type “K”
Wire Wrap™, Standard
0.025 (0.635) Square Terminals
TYPE
0.250 (6.35)
0.590
(14.99)
For technical questions, contact: [email protected]
B
0.150 0.120 ± 0.030
(3.81) (3.05 ± 0.762)
2R
0.200 0.120 ± 0.030
(5.08) (3.05 ± 0.762)
3R
0.150 0.180 ± 0.030
(3.81) (4.57 ± 0.762)
4R
0.200 0.180 ± 0.030
(5.08) (4.57 ± 0.762)
A
0.570 (14.48)
A
1R
B
To Fit
0.050 ± 0.002
(1.27 ± 0.051)
Dia. Eyelet
Document Number: 36002
Revision: 16-Feb-09
Type “1R”, “2R”, “3R” and “4R”
Right Angle
0.025 (0.635) Square Terminals
www.vishay.com
7
EB7D
Vishay Dale
Edgeboard Connectors, Dual Readout
FEATURES
ELECTRICAL SPECIFICATIONS
Current Rating: 5 A
Test Voltage Between Contacts:
At sea level: 1800 VRMS
At 70 000 feet (21 336 meters): 450 VRMS
Insulation Resistance: 5000 MΩ minimum at 500 VDC
potential
Contact Resistance: 30 mV maximum at rated current (with
gold plating)
Operating Temperature: - 55 °C to + 125 °C
Humidity: 96 h at 90 % relative humidity at + 40 °C, dried at
room temperature for 3 h minimum, insulation resistance
was greater than 5000 MΩ
Durability: After 500 cycles of insertion and withdrawal of a
0.070" (1.78 mm) thick steel test gauge, contact resistance
less than 0.030 V at 5 A and individual contact retention force
when measured with 0.054" (1.37 mm) thick steel test slug
greater than ½ oz.
Shock: Three 50G shocks in each of 3 mutually
perpendicular planes with no loss of continuity
Vibration: 2 h in each of 3 mutually perpendicular planes,
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
with no loss of continuity
PHYSICAL SPECIFICATIONS
Contact Type: Bifurcated bellows
Number of Contacts: 6, 10, 12, 15, 18, 22, 36, 43 per side
Contact Spacing: 0.156" (3.96 mm) center to center
Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)
Card Slot Depth: Dual readout = 0.260" (6.60 mm)
Note
• High temperature burn-in, edgeboard connectors, 0.156"
(3.96 mm) center to center are on www.vishay.com/doc?36006
• 0.156" C-C x 0.140" grid (3.96 mm x 3.56 mm)
• Bifurcated bellows contacts provide 2 flexing contact
surfaces to assure positive contact under adverse
conditions such as vibration or PC board irregularities
• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without
loss of contact position
• Selective gold plating
• Polarizing key is reinforced nylon, may be inserted by
hand, requires no adhesive.
• Protected entry, provided by recessed leading edge of
contact, permits the card slot to straighten and align the
board before electrical contact is made. Prevents damage
to contact which might be caused by warped or out of
tolerance boards
• Recognized under the Component Program of
Underwriters Laboratories, Inc. listed under file
E65524, project 77CH3889
APPLICATIONS
For use with 0.062" (1.57 mm) printed circuit boards requiring
an edgeboard type connector on 0.156" (3.96 mm) centers
MATERIAL SPECIFICATIONS
Body: (Standard) glass-filled phenolic per MIL-M-14, dark
green, flame retardant (UL 94 V-0). (Optional - see Ordering
Information)
“1” glass-filled diallyl phtalate per MIL-M-14, type SDG-F
green, flame retardant (UL 94 V-0)
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94 V-0)
”5” thermoplastic polyphenylene sulfied, glass filled, brown,
flame retardant (UL 94 V-0)
Contacts: Phosphor bronze
Polarizing Key: Glass reinforced nylon, flame retardant
(UL 94H-B)
Contact Plating: Gold (See Ordering Information)
ORDERING INFORMATION
EB7
MODEL
1
BODY
MATERIAL
Optional body
material
1 = Diallyl
Phthalate
3 = Glass-filled
Polyester
5 = Glass-filled
Polyphenylene
Sulfied
= Omit number
for standard
pheniolic
www.vishay.com
8
D
B
A
22
SG
X
A
MOUNTING
POLARIZING
CONTACT PLATING
DUAL
OPTIONAL STANDARD CONTACTS
VARIATIONS KEY POSITIONS
READOUT CONTACTS TERMINAL PER SIDE
VARIATIONS
SG = Selective gold plating
6, 10, 12,
(0.00003" (0.000762 mm)
Beryllium
Key(s) are located
A, E, C,
15, 18, 22, minimum thick) on contact
Copper
to right of position(s)
or K
36, or 43
area with gold flash on
copntacts
designated.
terminal
optional
Required only when
SGF = Selective gold plating
Available in
polarizing keys are
(0.000010" (0.000254 mm)
“A” and “E”
to be factory
minimum thick) on contact
contact
installed
area with gold flash on
styles only
terminal.
(Omit for
All gold plating over
standard)
0.00005" (0.00127 mm)
minimum nickel underplate.
Contact factory for additional
plating options.
For technical questions, contact: [email protected]
Document Number: 36003
Revision: 16-Feb-09
EB7D
Edgeboard Connectors, Dual Readout
Vishay Dale
DIMENSIONS in inches (millimeters)
0.030 (0.762)
0.062 ± 0.010
(1.57 ± 0.254)
R Typ.
A
B
D
E
C
C
0.156 ± 0.005
(3.96 ± 0.127)
Non-Cumulative
See Table
for Mounting
Variations
See Table
for Terminal
Variations
0.250
(6.35)
0.440
(11.18)
Section C to C:
F
± 0.010 (± 0.254)
Polarizing Key:
Type “A”
Types “C” and “K”
0.054 to 0.071
(1.37 to 1.80)
0.054 to 0.071
(1.37 to 1.80)
0.260 (6.60)
Depth of Card
Insertion
0.260 (6.60)
Depth of Card
Insertion
0.250
(6.35)
# OF CONTACT
POSITIONS
PER SIDE
0.028
(0.711)
0.230
(5.84)
0.245
(6.22)
When ordering polarizing keys individually,
specify by the Model Number:
PK-7 between contacts. Hand insertion tool,
TPK-7, provided upon request.
0.140 (3.56)
A
B
D
E
F
6
1.78 (45.21)
1.53 (38.86)
1.22 (30.99)
1.10 (27.94)
0.328 (8.33)
10
2.41 (61.21)
2.16 (54.86)
1.84 (46.74)
1.72 (43.69)
0.328 (8.33)
12
2.72 (69.09)
2.47 (62.74)
2.16 (54.86)
2.04 (51.82)
0.328 (8.33)
15
3.19 (81.03)
2.94 (74.68)
2.62 (66.55)
2.50 (63.50)
0.328 (8.33)
18
3.66 (92.96)
3.41 (86.61)
3.09 (78.49)
2.97 (75.44)
0.328 (8.33)
22
4.28 (108.71)
4.03 (102.36)
3.72 (94.49)
3.60 (91.44)
0.328 (8.33)
36
6.53 (165.86)
6.22 (157.99)
5.91 (150.11)
5.78 (146.81)
0.438 (11.13)
43
7.62 (193.55)
7.30 (185.42)
7.00 (177.80)
6.80 (172.72)
0.500 (12.70)
Document Number: 36003
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
9
EB7D
Edgeboard Connectors, Dual Readout
Vishay Dale
MOUNTING VARIATIONS in inches (millimeters)
Type “V”
Clearance Hole
Type “VI”
Clearance Hole
No Mounting Pad
Type “X”
Clearance Hole
0.250
(6.35)
Ref.
0.250
(6.35)
Ref.
0.250
(6.35)
Ref.
0.142
(3.61)
Dia.
0.142 (3.61) Dia.
Type “XI”
Clearance Hole
No Mounting Pad
0.220
(5.59)
Ref.
0.010 (0.254)
0.000 (0.000)
0.250
(6.35)
Ref.
0.250
(6.35)
Ref.
4-40
UNC-2B
0.220
(5.59)
Ref.
0.218
(5.54)
Ref.
0.128 (3.25) Dia.
Type “Z”
Floating Bushing Radial Float 0.047 (1.19)
Type “Y”
Threaded Insert
0.250
(6.35)
Ref.
0.128
(3.25)
Dia.
Type “W”
No Mounting Flange
Note: Overall body length
increased by 0.060 (1.52)
0.250
[6.35]
Dia.
0.116
(2.95)
Dia.
0.270 (6.86)
TERMINAL VARIATIONS in inches (millimeters)
Type “A”
Pierced
To fit 3,
#22 AWG
Wires
0.200 ± 0.015
(5.08 ± 0.381)
To fit 0.051 (1.30),
Min. Through Hole
0.086
(2.18)
0.100
(2.54)
0.086 x 0.008
(2.18 x 0.203)
0.140 ± 0.015
(3.56 ± 0.381)
G
See Table
0.220 ± 0.015
(5.59 ± 0.381)
www.vishay.com
10
Type “E”
Card Extender
Type “C” and “K”
Solder Dip
TYPE
G
C
0.125 ± 0.015 (3.18 ± 0.381)
K
0.200 ± 0.015 (5.08 ± 0.381)
0.050
(1.27)
120°
Typ.
15°
Typ.
For technical questions, contact: [email protected]
Uses
Type “A”
Contact
Document Number: 36003
Revision: 16-Feb-09
EB7S
Vishay Dale
Edgeboard Connectors, Single Readout
FEATURES
ELECTRICAL SPECIFICATIONS
Current Rating: 5 A
Test Voltage Between Contacts:
At sea level: 1800 VRMS
At 70 000 feet (21 336 meters): 450 VRMS
Insulation Resistance: 5000 MΩ minimum at 500 VDC
potential
Contact Resistance: 30 mV maximum at rated current (with
gold plating)
Operating Temperature: - 55 °C to + 125 °C
Humidity: 96 h at 90 % relative humidity at + 40 °C, dried at
room temperature for 3 h minimum, insulation resistance
was greater than 5000 MΩ
Durability: (With gold plating) After 500 cycles of insertion
and withdrawal of a 0.070" (1.78 mm) thick steel test
gauge, contact resistance less than 0.030 V at 5 A and
individual contact retention force when measured with 0.054"
(1.37 mm) thick steel test slug greater than ½ oz.
Shock: Three 50G shocks in each of 3 mutually
perpendicular planes with no loss of continuity
Vibration: 2 h in each of 3 mutually perpendicular planes,
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
with no loss of continuity
PHYSICAL SPECIFICATIONS
Contact Type: Bifurcated bellows
Number of Contacts: 6, 10, 12, 15, 18, and 22
Contact Spacing: 0.156" (3.96 mm) center to center
Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)
Card Slot Depth: Single readout = 0.300" (7.62 mm)
Note
• High temperature burn-in, edgeboard connectors, 0.156"
(3.96 mm) center to center are on www.vishay.com/doc?36006
• 0.156" (3.96 mm) C-C
• Bifurcated bellows contacts provide 2 flexing contact
surfaces to assure positive contact under adverse
conditions such as vibration or PC board irregularities
• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without
loss of contact position
• Selective gold plating
• Polarizing key is reinforced nylon, may be inserted by
hand, requires no adhesive.
• Protected entry, provided by recessed leading edge of
contact, permits the card slot to straighten and align the
board before electrical contact is made. Prevents damage
to contact which might be caused by warped or out of
tolerance boards
• Recognized under the Component Program of
Underwriters Laboratories, Inc. listed under file
E65524, project 77CH3889
APPLICATIONS
For use with 0.062" (1.57 mm) printed circuit boards requiring
an edgeboard type connector on 0.156" (3.96 mm) centers
MATERIAL SPECIFICATIONS
Body: (Standard) glass-filled phenolic per MIL-M-14, dark
green, flame retardant (UL 94 V-0). (Optional - see Ordering
Information)
“1” glass-filled diallyl phtalate per MIL-M-14, type SDG-F
green, flame retardant (UL 94 V-0)
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94 V-0)
Contacts: Phosphor bronze
Polarizing Key: Glass reinforced nylon, flame retardant
(UL 94H-B)
Contact Plating: Gold (See Ordering Information)
ORDERING INFORMATION
EB7
1
MODEL BODY MATERIAL
Optional body
material
1 = Diallyl
Phthalate
3 = Glass-filled
Polyester
= Omit number
for standard
pheniolic
Document Number: 36004
Revision: 16-Feb-09
S
SINGLE
READOUT
A
22
SG
X
A
STANDARD CONTACTS
CONTACT PLATING
MOUNTING
POLARIZING
TERMINAL
VARIATIONS
KEY POSITIONS
VARIATIONS
SG = Selective gold plating
6, 10, 12,
(0.00003" (0.000762 mm)
Key(s) are located to
A or B
15, 18,
minimum thick) on contact area
right of position(s)
or 22
with gold flash on terminal
designated. Required
SGF = Selective gold plating
only when polarizing
(0.000010" (0.000254 mm)
keys are to be factory
minimum thick) on contact area
installed
with gold flash on terminal.
All gold plating over 0.00005"
(0.00127 mm) minimum nickel
underplate.
Contact factory for additional
plating options.
For technical questions, contact: [email protected]
www.vishay.com
11
EB7S
Edgeboard Connectors, Single Readout
Vishay Dale
DIMENSIONS in inches (millimeters)
0.030 (0.762)
0.062 ± 0.010
(1.57 ± 0.254)
R Typ.
A
B
D
E
C
C
0.156 ± 0.005
(3.96 ± 0.127)
Non-Cumulative
See Table
for Mounting
Variations
See Table
for Terminal
Variations
0.440
(11.18)
Section C to C:
0.250
(6.35)
0.328 ± 0.010
(8.33 ± 0.254)
Polarizing Key:
Type “A”
0.054 to 0.071
(1.37 to 1.80)
0.300 (7.62)
Depth of
Card Insertion
0.245
(6.22)
When ordering polarizing keys individually, specify by the
Model Number:
PK-7 between contacts. Hand insertion tool, TPK-7,
provided upon request.
0.016 (0.410)
# OF CONTACT
POSITIONS
0.028
(0.711)
0.230
(5.84)
A
B
D
E
6
1.78 (45.21)
1.531 (38.89)
1.218 (30.94)
1.100 (27.94)
10
2.41 (61.21)
2.156 (54.76)
1.843 (46.81)
1.724 (43.79)
12
2.72 (69.09)
2.468 (62.69)
2.156 (54.76)
2.036 (51.71)
15
3.19 (81.03)
2.937 (74.60)
2.624 (66.65)
2.504 (63.60)
18
3.66 (92.96)
3.406 (86.51)
3.093 (78.56)
2.972 (75.49)
22
4.28 (108.71)
4.031 (102.39)
3.717 (94.41)
3.596 (91.34)
www.vishay.com
12
For technical questions, contact: [email protected]
Document Number: 36004
Revision: 16-Feb-09
EB7S
Edgeboard Connectors, Single Readout
Vishay Dale
MOUNTING VARIATIONS in inches (millimeters)
Type “V”
Clearance Hole
Type “VI”
Clearance Hole
No Mounting Pad
0.142
(3.61)
Dia.
Type “XI”
Clearance Hole
No Mounting Pad
0.220
(5.59)
Ref.
0.128
(3.25)
Dia.
0.220
(5.59)
Ref.
0.010 (0.254)
0.000 (0.000)
0.250
(6.35)
Ref.
0.250
(6.35)
Ref.
4-40
UNC-2B
0.218
(5.54)
Ref.
0.128 (3.25) Dia.
Type “Z”
Floating Bushing Radial Float 0.047 (1.19)
Type “Y”
Threaded Insert
0.250
(6.35)
Ref.
Type “X”
Clearance Hole
0.250
(6.35)
Ref.
0.250
(6.35)
Ref.
0.250
(6.35)
Ref.
0.142 (3.61) Dia.
Type “W”
No Mounting Flange
0.250
[6.35]
Dia.
0.116
(2.95)
Dia.
Note: Overall body length
increased by 0.060 (1.52)
0.270 (6.86)
TERMINAL VARIATIONS in inches (millimeters)
Type “A”
Pierced
To fit 3,
#22 AWG
Wires
Type “B”
Solder Dip
To fit 0.051 (1.30)
Min. Through Hole
0.086
(2.18)
0.220 ± 0.015
(5.59 ± 0.381)
Document Number: 36004
Revision: 16-Feb-09
0.220 ± 0.015
(5.59 ± 0.381)
For technical questions, contact: [email protected]
www.vishay.com
13
EB8
Vishay Dale
Edgeboard Connectors, Dual Readout
FEATURES
ELECTRICAL SPECIFICATIONS
Current Rating: 5 A
Test Voltage Between Contacts:
At sea level: 1800 VRMS
At 70 000 feet (21 336 meters): 450 VRMS
Insulation Resistance: 5000 MΩ minimum at 500 VDC
potential
Contact Resistance: 30 mV maximum at rated current (with
gold plating)
Operating Temperature: - 55 °C to + 125 °C
Humidity: 96 h at 90 % relative humidity at + 40 °C, dried at
room temperature for 3 h minimum, insulation resistance
was greater than 5000 MΩ
Durability: (With gold plating) After 500 cycles of insertion
and withdrawal of a 0.070" (1.78 mm) thick steel test
gauge, contact resistance less than 0.030 V at 5 A and
individual contact retention force when measured with 0.054"
(1.37 mm) thick steel test slug greater than ½ oz.
Shock: Three 50G shocks in each of 3 mutually
perpendicular planes with no loss of continuity
Vibration: 2 h in each of 3 mutually perpendicular planes,
frequency sweep 10 cps to 55 cps at 0.06 double amplitude
with no loss of continuity
PHYSICAL SPECIFICATIONS
Contact Type: Bifurcated bellows
Number of Contacts: 6, 10, 12, 15, 18, 22, 24, 25 per side
Contact Spacing: 0.156" (3.96 mm) center to center
Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)
Card Slot Depth: Dual readout = 0.330" (8.38 mm)
• 0.156" C-C x 0.200" grid (3.96 mm x 5.08 mm)
• Greater design latitude
3 body materials: Diallyl phthalate, phenolic and
glass-filled polyester
6 contact termination styles, 8 body sizes, 7 mounting
styles
• Bifurcated bellows contacts provide 2 flexing contact
surfaces to assure positive contact
• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
• Polarization between contact positions in all sizes
• Selective gold plating
• Recognized under the Component Program of
Underwriters Laboratories, Inc. listed under file
E65524, project 77CH3889
APPLICATIONS
For use with 0.062" (1.57 mm) printed circuit boards requiring
an edgeboard type connector on 0.156" (3.96 mm) centers
MATERIAL SPECIFICATIONS
Body:
“1” glass-filled diallyl phtalate per MIL-M-14, type SDG-F
green, flame retardant (UL 94 V-0)
“2” glass-filled phenolic per MIL-M-14, type MFH dark green,
flame retardant (UL 94 V-0)
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94 V-0)
“5” thermoplastic polyphenylene sulfied, glass-filled, brown,
flame retardant (UL 94 V-0)
Contacts: Phosphor bronze
Polarizing Key: Glass reinforced nylon, flame retardant
(UL 94H-B)
Contact Plating: Gold (See Ordering Information)
Note
• High temperature burn-in, edgeboard connectors, 0.156"
(3.96 mm) center to center are on www.vishay.com/doc?36006
ORDERING INFORMATION
EB8
1
MODEL BODY MATERIAL
Optional body
material
1 = Diallyl
phthalate
2 = Phenolic
3 = Glass-filled
polyester
5 = Glass-filled
polyphenylene
sulfied
www.vishay.com
14
B
OPTIONAL
CONTACTS
A
22
SG
X
A
MOUNTING
POLARIZING
CONTACT PLATING
STANDARD CONTACTS
VARIATIONS KEY POSITIONS
TERMINAL PER SIDE
SG = Selective gold plating
VARIATIONS
(0.00003" (0.000762 mm)
6, 10, 12,
Beryllium copper
Key(s) are located to
15, 18, 22, minimum thick) on contact area
A, C, D,
contacts optional.
right of position(s)
with gold flash on terminal
24 or 25
K, L, or E
Available in “A”
designated. Required
SGF = Selective gold plating
and “E” contact
only when polarizing
(0.000010" (0.000254 mm)
styles only (Omit
keys are to be factory
minimum thick) on contact area
for standard)
installed
with gold flash on terminal.
All gold plating over 0.00005"
(0.00127 mm) minimum nickel
underplate.
Contact factory for additional
plating options.
For technical questions, contact: [email protected]
Document Number: 36005
Revision: 16-Feb-09
EB8
Edgeboard Connectors, Dual Readout
Vishay Dale
DIMENSIONS in inches (millimeters)
0.030 (0.762)
0.060 (1.52)
R Typ.
0.350 (8.89)
Typ.
A
B
D
E
C
C
0.156 (3.96)
Typ.
See Table for
Terminal Variations
0.460
(11.70)
Section C to C:
0.250
(6.35)
0.340
(8.64)
Polarizing Key:
0.054 to 0.071
(1.37 to 1.80)
0.330 (8.38)
Depth of
Card Insertion
0.325
(8.26)
When ordering polarizing keys individually, specify by the
Model Number:
PK-8 between contacts. Hand insertion tool, TPK-8,
provided upon request.
0.200
(5.08)
# OF CONTACT
POSITIONS
0.023
(0.584)
0.120
(3.05)
A
B
D
E
6
1.78 (45.21)
1.531 (38.89)
1.240 (31.50)
1.100 (27.94)
10
2.41 (61.21)
2.156 (54.76)
1.864 (47.35)
1.724 (43.79)
12
2.72 (69.09)
2.469 (62.71)
2.176 (55.27)
2.036 (51.71)
15
3.19 (81.03)
2.937 (74.60)
2.644 (67.16)
2.504 (63.60)
18
3.66 (92.96)
3.406 (86.51)
3.112 (79.05)
2.972 (75.49)
22
4.28 (108.71)
4.031 (102.39)
3.736 (94.89)
3.596 (91.34)
24
4.59 (116.59)
4.344 (110.33)
4.051 (102.89)
3.911 (99.34)
25
4.75 (120.65)
4.500 (114.30)
4.207 (106.86)
4.067 (103.30)
Document Number: 36005
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
15
EB8
Edgeboard Connectors, Dual Readout
Vishay Dale
MOUNTING VARIATIONS in inches (millimeters)
Type “V”
Clearance Hole
Type “W”
No Mounting Flange
Type “VI”
Clearance Hole
No Mounting Pad
0.250
(6.35)
Ref.
Type “X”
Clearance Hole
0.250
(6.35)
Ref.
0.220 (5.59)
Ref.
0.142
(3.61)
Dia.
0.142 (3.61) Dia.
Type “XI”
Clearance Hole
No Mounting Pad
0.010 (0.254)
0.000 (0.000)
Type “Y”
Threaded Insert
0.220 (5.59)
Ref.
0.128
(3.25)
Dia.
Type “Z”
Floating Bushing Radial Float 0.047 (1.19)
0.250 (6.35)
Ref.
4-40
UNC-2B
0.128 (3.25) Dia.
0.250 (6.35)
Ref.
0.250 (6.35)
Ref.
Note: Overall body length
increased by 0.060 (1.52)
0.250 (6.35)
Dia.
0.116
(2.95)
Dia.
0.270 (6.86)
TERMINAL VARIATIONS in inches (millimeters)
Type “A”
Pierced
Type “D”
Solder Dip
Type “C”
To fit 3,
#22 AWG
Wires
To fit 0.051 (1.30)
Min. Through Hole
To fit 0.051 (1.30)
Min. Through Hole
0.086
(2.18)
0.200 ± 0.015
(5.08 ± 0.381)
0.200 ± 0.015
(5.08 ± 0.381)
0.200 ± 0.015
(5.08 ± 0.381)
0.104 ± 0.015
(2.64 ± 0.381)
0.125 ± 0.015
(3.18 ± 0.381)
Type “K”
Solder Dip
Type “L”
Solder Dip
To fit 0.051 (1.30)
Min. Through Hole
To fit 0.036 (0.914)
Min. Through Hole
0.200 ± 0.015
(5.08 ± 0.381)
0.200 ± 0.015
(5.08 ± 0.381)
0.156 ± 0.015
(3.96 ± 0.381)
0.200 ± 0.015
(5.08 ± 0.381)
Type “E”
Card Extender
0.200 ± 0.015
(5.08 ± 0.381)
0.086
(2.18)
0.100
(2.54)
120°
Typ.
www.vishay.com
16
0.050
(1.27)
Uses
Type “A”
Contact
15°
Typ.
For technical questions, contact: [email protected]
Document Number: 36005
Revision: 16-Feb-09
EBT156
Vishay Dale
Edgeboard Connectors, Single Readout, Dip Solder, Eyelet and
Wire Wrap™ Termination
FEATURES
• 0.156" (3.96 mm) C-C
• Modified tuning fork contacts have chamfered lead-in to
reduce wear on printed circuit board contacts without
sacrificing contact pressure and wiping action
• Accepts PC board thickness of 0.054" to 0.070" (1.37 mm
to 1.78 mm)
• Polarization on or between contact positions in all sizes.
Between contact polarization permits polarizing without
loss of a contact position
• Polarizing key is reinforced nylon, may be inserted by
hand, requires no adhesive
• Protected entry, provided by recessed leading edge of
contact, permits the card slot to staighten and align the
board before electrical contact is made. Prevents damage
to contacts which might be caused by warped or out of
tolerance boards
• Optional terminal configurations, including eyelet (type A),
dip-solder (types B, C, D, R), Wire Wrap™ (types E, F)
• Connectors with type A, B, C, D, or R contacts are
recognized under the Component Program of
Underwriters Laboratories, Inc. listed under file
E65524, project 77CH3889
ELECTRICAL SPECIFICATIONS
Current Rating: 5 A
Test Voltage Between Contacts:
At sea level: 1800 VRMS
At 70 000 feet (21 336 meters): 450 VRMS
Insulation Resistance: 5000 MΩ minimum (at 500 VDC
potential)
Contact Resistance: (voltage drop) 30 mV maximum at
rated current with gold flash
PHYSICAL SPECIFICATIONS
Number of Contacts: 6, 10, 12, 15, 18, or 22
Contact Spacing: 0.156" (3.96 mm)
Card Thickness: 0.054" to 0.070" (1.37 mm to 1.78 mm)
Card Slot Depth: 0.330" (8.38 mm)
APPLICATIONS
For use with 0.062" (1.57 mm) printed circuit boards requiring
an edgeboard type connector on 0.156" (3.96 mm) centers
MATERIAL SPECIFICATIONS
Body: Glass-filled phenolic per MIL-M-14, type MFH, black,
flame retardant (UL 94 V-0)
Contacts: Copper alloy
Finish: 1 = Electro tin plated, 2 = Gold flash
Polarizing Key: Glass-filled nylon
Optional Threaded Mounting Insert: Nickel plated brass
(Type Y)
Optional Floating Mounting Bushing: Cadmium plated
brass (Type Z)
ORDERING INFORMATION
EBT156
MODEL
10
CONTACTS
A
STANDARD TERMINAL
VARIATIONS
6, 10, 12,
15, 18, or 22
Document Number: 36007
Revision: 16-Feb-09
A, B, C, D,
E, F, or R
1
CONTACT
FINISH
X
A, J
MOUNTING BETWEEN CONTACT
POLARIZATION
VARIATIONS
1 = Electro tin W, X, Y, or Z
plated
2 = Gold flash
Required only when polarizing key(s) are to be
factory installed.
Polarization key positions: Between contact
polarization key(s) are located to the right of the
contact position(s) desired.
Example: A, J means keys between A and B,
and J and K
For technical questions, contact: [email protected]
A9, J9
ON CONTACT POLARIZATION
Required only when polarizing
key(s) are to be factory installed.
Polarization key replaces contact.
When polarizing key(s) replaces
contact(s), indicate by adding suffix
“9” to contact position(s) desired.
Example: A9, J9 means keys
replace terminals A and J
www.vishay.com
17
EBT156
Edgeboard Connectors, Single Readout, Dip Solder, Eyelet
and Wire Wrap™ Termination
Vishay Dale
DIMENSIONS in inches (millimeters)
B
F
G
C
A
D
E
A
0.156 (3.96)
Centers Typ.
See Mounting
Variations
0.330 (8.38)
To accept a
0.054 to 0.070 (1.37 to 1.78)
Thick Card
0.250 (6.35)
0.458 (11.63)
Between contact or
on contact polarization
available in all sizes for
factory or field insertion.
Section A to A:
Polarizing Key:
PK156
PKC156
0.062 (1.57)
See
Terminal
Variations
0.235
(5.97)
0.060 ± 0.002
(1.52 ± 0.051)
0.170 (4.32)
0.125
(3.18)
0.328
(8.33)
Staked
Contact
0.225
(5.72)
0.150 (3.81)
0.180 (4.57)
0.034
(0.864)
On Contact Polarizing Key
(Field Insertable)
Between Contact Polarizing Key
When ordering polarizing keys individually, specify by Model Number PK156 or
PKC156
# OF CONTACT
POSITIONS
B
C
D
E
F
G
6
0.340 (8.64)
1.10 (27.94)
1.24 (31.50)
0.781 (19.84)
1.80 (45.72)
1.53 (38.86)
10
0.340 (8.64)
1.72 (43.69)
1.86 (47.24)
1.41 (35.81)
2.43 (61.72)
2.16 (54.86)
12
0.340 (8.64)
2.04 (51.82)
2.18 (55.37)
1.72 (43.69)
2.74 (69.60)
2.47 (62.74)
15
0.340 (8.64)
2.50 (63.50)
2.65 (67.31)
2.19 (55.63)
3.21 (81.53)
2.94 (74.68)
18
0.340 (8.64)
2.97 (75.44)
3.11 (78.99)
2.66 (67.56)
3.68 (93.47)
3.41 (86.61)
22
0.340 (8.64)
3.60 (91.44)
3.74 (95.0)
3.28 (83.31)
4.30 (109.22)
4.03 (102.36)
www.vishay.com
18
For technical questions, contact: [email protected]
Document Number: 36007
Revision: 16-Feb-09
EBT156
Edgeboard Connectors, Single Readout, Dip Solder, Eyelet and
Wire Wrap™ Termination
Vishay Dale
MOUNTING VARIATIONS in inches (millimeters)
Type “Z”
Floating Bushing
Type “Y”
Threaded Insert
Type “X”
Clearance Hole
Type “W”
No Mounting Flange
+ 0.010 (0.254)
- 0.000 (0.000)
0.250 (6.35)
Ref.
4-40 UNC-2B
0.140 (3.56)
Dia.
0.010 (0.254)
0.005 (0.127)
Axial Float
0.116 ± 0.003
(2.95 ± 0.076)
0.010 (0.254) Min.
Radial Float
0.040 (1.02) Min. Wall
TERMINAL VARIATIONS in inches (millimeters)
Type “A”
1.25
(31.75)
Type “C”
Type “B”
0.125
(3.18)
0.190 (4.83)
0.040
(1.02)
0.406
(10.318)
0.031
(0.787)
Sq.
0.031
(0.787)
0.090 (2.29)
Type “D”
0.200 (5.08)
0.031 (0.787) Sq.
0.031 (0.787) Sq.
Type “E”
Type “F”
Type “R”
0.100
(2.54)
0.062
(1.57)
0.031
(0.787)
Document Number: 36007
Revision: 16-Feb-09
0.500
(12.70)
0.062
(1.57)
0.800
(20.32)
0.560
(14.22)
0.031
(0.787)
Sq.
0.031
(0.787)
For technical questions, contact: [email protected]
0.170 (4.32)
www.vishay.com
19
EB4, EB6, EB7, EB8
Vishay Dale
Edgeboard Connectors, 200 °C Burn-In Connectors, Dual Readout
FEATURES
• EB4, 0.100" (2.54 mm) C-C; EB6, 0.125" (3.17 mm) C-C;
EB7 and EB8, 0.156" (3.96 mm) C-C
• Right angle styles included for all models
• High temperature, glass reinforced PPS connector bodies
- 200 °C
• High reliability copper-nickel-tin alloy contacts
• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm
to 1.80 mm)
• High reliability bifurcated bellows contacts
• Gold plated contacts
• Card extender style terminals standard
• Variety of mounting styles available
• Recognized under the Component Program of
Underwriters Laboratories, Inc. listed under file
E65524
APPLICATIONS
High temperature, long life connectors specifically designed
for burn-in oven and automatic temperature testing
applications.
Available in a wide range of sizes. Priced affordably and
competitively.
SPECIAL NOTE
ELECTRICAL SPECIFICATIONS
Current Rating: 5 A
Test Voltage Between Contacts:
At sea level: 1800 VRMS
At 70 000 feet (21 336 meters): 450 VRMS
Insulation Resistance: 5000 MΩ minimum at 500 VDC
potential
Contact Resistance: 30 mV maximum at rated current
Humidity: 48 h at 95 % relative humity at + 90 °C, insulation
resistance 5000 MΩ
Shock: Threee 50G shocks in each of 3 mutually
perpendicular planes with no loss of continuity
www.vishay.com
20
When operating units at elevated temperatures, solder
having a melting point 50 °C above the operating
temperature should be used. Contact factory for specific
solder information.
MATERIAL SPECIFICATIONS
Body Material: 200 °C connectors: Fiberglass reinforced
polyphenylene sulfide, + 200 °C operating temperature,
flame retardant (UL 94 V-0)
Contacts: Copper-nickel-tin alloy per ASTM B 740
Plating: Golf plating (0.00003" (0.000762 mm) thick), over
0.00005" (0.00127 mm) minimum nickel underplate
For technical questions, contact: [email protected]
Document Number: 36006
Revision: 16-Feb-09
EB4, EB6, EB7, EB8
Edgeboard Connectors, 200 °C Burn-In Connectors,
Dual Readout
Vishay Dale
DIMENSIONS in inches (millimeters)
EB4 0.100" (2.54 mm) C-C
0.060
(1.52)
R Typ.
0.050
(1.27)
Typ.
0.287
(7.29)
0.342 (8.69)
Typ.
A
B
C
0.100
(2.54)
Typ.
D
E
0.060 (1.52) Typ.
0.250
(6.35)
Typ.
0.180
(4.57)
Typ.
0.430
(10.92)
Typ.
0.365
(9.27)
0.610 (15.49)
Typ.
MODEL PART NUMBER
# OF CONTACT
POSITIONS
PER SIDE
A
B
C
D
E
CARD SLOT
DEPTH
EB45-P 6GΔ
6
1.435 (36.45)
1.175 (29.85)
0.700 (17.78)
0.860 (24.84)
0.750 (19.05)
0.300 (7.62)
EB45-P 10GΔ
10
1.835 (46.61)
1.575 (40.00)
1.100 (27.94)
1.260 (32.00)
1.150 (29.21)
0.300 (7.62)
EB45-P 12GΔ
12
2.035 (51.69)
1.775 (45.08)
1.300 (33.02)
1.460 (37.08)
1.350 (34.29)
0.300 (7.62)
EB45-P 15GΔ
15
2.335 (59.31)
2.075 (52.70)
1.600 (40.64)
1.760 (44.70)
1.650 (41.91)
0.300 (7.62)
EB45-P 18GΔ
18
2.635 (66.93)
2.375 (60.32)
1.900 (48.26)
2.060 (52.32)
1.950 (49.53)
0.300 (7.62)
EB45-P 20GΔ
20
2.835 (72.01)
2.575 (65.40)
2.100 (53.34)
2.260 (57.40)
2.150 (54.61)
0.300 (7.62)
EB45-P 22GΔ
22
3.035 (77.09)
2.775 (70.48)
2.300 (58.42)
2.460 (62.48)
2.350 (59.69)
0.300 (7.62)
EB45-P 25GΔ
25
3.335 (84.71)
3.075 (78.10)
2.600 (66.04)
2.760 (70.10)
2.650 (67.31)
0.300 (7.62)
EB45-P 28GΔ
28
3.635 (92.33)
3.375 (85.72)
2.900 (73.66)
3.060 (77.72)
2.950 (74.93)
0.300 (7.62)
EB45-P 30GΔ
30
3.835 (97.41)
3.575 (90.80)
3.100 (78.74)
3.260 (82.80)
3.150 (80.01)
0.300 (7.62)
EB45-P 31GΔ
31
3.935 (99.95)
3.675 (93.34)
3.200 (81.28)
3.360 (85.34)
3.250 (82.55)
0.300 (7.62)
EB45-P 35GΔ
35
4.335 (110.11)
4.075 (103.50)
3.600 (91.44)
3.760 (95.50)
3.650 (92.71)
0.300 (7.62)
EB45-P 36GΔ
36
4.435 (112.65)
4.175 (106.04)
3.700 (93.98)
3.860 (98.04)
3.750 (95.25)
0.300 (7.62)
EB45-P 40GΔ
40
4.835 (122.81)
4.575 (116.20)
4.100 (104.14)
4.260 (108.20)
4.150 (105.41)
0.300 (7.62)
EB45-P 43GΔ
43
5.135 (130.43)
4.875 (123.82)
4.400 (111.76)
4.560 (115.82)
4.450 (113.03)
0.300 (7.62)
EB45-P 44GΔ
44
5.235 (132.97)
4.975 (126.36)
4.500 (114.30)
4.660 (118.36)
4.550 (115.57)
0.300 (7.62)
EB45-P 48GΔ
48
5.635 (143.13)
5.375 (136.52)
4.900 (124.46)
5.060 (128.52)
4.950 (125.73)
0.300 (7.62)
EB45-P 49GΔ
49
5.735 (145.67)
5.475 (139.06)
5.000 (127.00)
5.160 (131.06)
5.050 (128.27)
0.300 (7.62)
EB45-P 50GΔ
50
5.835 (148.21)
5.575 (141.60)
5.100 (129.54)
5.260 (133.60)
5.150 (130.81)
0.300 (7.62)
EB45-P 60GΔ
60
6.835 (173.61)
6.575 (167.00)
6.100 (154.94)
6.260 (159.00)
6.150 (156.21)
0.300 (7.62)
EB45-P 65GΔ
65
7.335 (186.31)
7.075 (179.70)
6.600 (167.64)
6.760 (171.70)
6.650 (168.91)
0.300 (7.62)
ORDERING INFORMATION
When ordering connectors using the above part numbers:
= Indicate “E” for card extender, “K” for Wire Wrap™ or “3R” for right angle terminals
Δ = Indicate “X” for standard mounting, “XF” for flush mounting or “XS” for side mounting
Document Number: 36006
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
21
EB4, EB6, EB7, EB8
Edgeboard Connectors, 200 °C Burn-In Connectors,
Dual Readout
Vishay Dale
DIMENSIONS in inches (millimeters)
EB6 0.125" (3.17 mm) C-C
0.060
(1.52)
R Typ.
0.060
(1.52)
Typ.
0.260
(6.60)
0.340 (8.64)
Typ.
A
B
C
0.125
(3.17)
Typ.
D
E
0.060 (1.52) Typ.
0.250
(6.35)
Typ.
0.365
(9.27)
0.180
(4.57)
Typ.
0.430
(10.92)
Typ.
0.610 (15.49)
Typ.
MODEL PART NUMBER
# OF CONTACT
POSITIONS
PER SIDE
A
B
C
D
E
CARD SLOT
DEPTH
EB65-P 6GΔ
6
1.555 (39.50)
1.295 (32.89)
0.875 (22.22)
1.035 (26.29)
0.875 (22.22)
0.300 (7.62)
EB65-P 10GΔ
10
2.055 (52.20)
1.795 (45.59)
1.375 (34.92)
1.535 (38.99)
1.375 (34.92)
0.300 (7.62)
EB65-P 12GΔ
12
2.305 (58.55)
2.045 (51.94)
1.625 (41.28)
1.785 (45.34)
1.625 (41.28)
0.300 (7.62)
EB65-P 14GΔ
14
2.555 (64.90)
2.295 (58.29)
1.875 (47.62)
2.035 (51.69)
1.875 (47.62)
0.300 (7.62)
EB65-P 15GΔ
15
2.680 (68.07)
2.420 (61.47)
2.000 (50.80)
2.160 (54.86)
2.000 (50.80)
0.300 (7.62)
EB65-P 18GΔ
18
3.055 (77.60)
2.795 (70.99)
2.375 (60.32)
2.535 (64.39)
2.375 (60.32)
0.300 (7.62)
EB65-P 22GΔ
22
3.555 (90.30)
3.295 (83.69)
2.875 (73.02)
3.035 (77.09)
2.875 (73.02)
0.300 (7.62)
EB65-P 24GΔ
24
3.805 (96.65)
3.545 (90.04)
3.125 (79.38)
3.285 (83.44)
3.125 (79.38)
0.300 (7.62)
EB65-P 25GΔ
25
3.930 (99.82)
3.670 (93.22)
3.250 (82.55)
3.410 (86.61)
3.250 (82.55)
0.300 (7.62)
EB65-P 28GΔ
28
4.305 (109.35)
4.045 (102.74)
3.625 (92.08)
3.785 (96.14)
3.625 (92.08)
0.300 (7.62)
EB65-P 30GΔ
30
4.555 (115.70)
4.295 (109.09)
3.875 (98.42)
4.035 (102.49)
3.875 (98.42)
0.300 (7.62)
EB65-P 31GΔ
31
4.680 (118.87)
4.420 (112.27)
4.000 (101.60)
4.160 (105.66)
4.000 (101.60)
0.300 (7.62)
EB65-P 32GΔ
32
4.805 (122.05)
4.545 (115.44)
4.125 (104.78)
4.285 (108.84)
4.125 (104.78)
0.300 (7.62)
EB65-P 35GΔ
35
5.180 (131.57)
4.920 (124.97)
4.500 (114.30)
4.660 (118.36)
4.500 (114.30)
0.300 (7.62)
EB65-P 36GΔ
36
5.305 (134.75)
5.045 (128.14)
4.625 (117.48)
4.785 (121.54)
4.625 (117.48)
0.300 (7.62)
EB65-P 40GΔ
40
5.805 (147.45)
5.545 (140.84)
5.125 (130.18)
5.285 (134.24)
5.125 (130.18)
0.300 (7.62)
EB65-P 43GΔ
43
6.180 (156.97)
5.920 (150.37)
5.500 (139.70)
5.660 (143.76)
5.500 (139.70)
0.300 (7.62)
EB65-P 44GΔ
44
6.305 (160.15)
6.045 (153.54)
5.625 (142.88)
5.785 (146.94)
5.625 (142.88)
0.300 (7.62)
EB65-P 49GΔ
49
6.930 (176.02)
6.670 (169.42)
6.250 (158.75)
6.410 (162.81)
6.250 (158.75)
0.300 (7.62)
EB65-P 50GΔ
50
7.055 (179.20)
6.795 (172.59)
6.375 (161.92)
6.535 (165.99)
6.375 (161.92)
0.300 (7.62)
ORDERING INFORMATION
When ordering connectors using the above part numbers:
= Indicate “E” for card extender, “K” for Wire Wrap™ or “3R” for right angle terminals
Δ = Indicate “X” for standard mounting, “XF” for flush mounting or “XS” for side mounting
www.vishay.com
22
For technical questions, contact: [email protected]
Document Number: 36006
Revision: 16-Feb-09
EB4, EB6, EB7, EB8
Edgeboard Connectors, 200 °C Burn-In Connectors,
Dual Readout
Vishay Dale
DIMENSIONS in inches (millimeters)
EB7 and EB8 0.156" (3.96 mm) C-C
0.030 (0.762)
0.060
(1.52)
R Typ.
A
B
C
D
0.156 (3.96) Typ.
0.250 (6.35)
E
EB75 = 0.440 (11.18)
EB85 = 0.460 (11.68)
MODEL PART NUMBER
# OF CONTACT
POSITIONS
PER SIDE
A
B
C
D
E
CARD SLOT
DEPTH
EB85-P 6GΔ
6
1.780 (45.21)
1.531 (38.89)
1.240 (31.50)
1.100 (27.94)
0.340 (8.64)
0.330 (8.38)
EB85-P 10GΔ
10
2.410 (61.21)
2.156 (54.76)
1.864 (47.35)
1.724 (43.79)
0.340 (8.64)
0.330 (8.38)
EB85-P 12GΔ
12
2.720 (69.09)
2.469 (62.71)
2.176 (55.27)
2.036 (51.71)
0.340 (8.64)
0.330 (8.38)
EB85-P 15GΔ
15
3.190 (81.03)
2.937 (74.60)
2.644 (67.16)
2.504 (63.60)
0.340 (8.64)
0.330 (8.38)
EB85-P 18GΔ
18
3.660 (92.96)
3.406 (86.51)
3.112 (79.04)
2.972 (75.49)
0.340 (8.64)
0.330 (8.38)
EB85-P 22GΔ
22
4.280 (108.71)
4.031 (102.39)
3.736 (94.89)
3.596 (91.34)
0.340 (8.64)
0.330 (8.38)
EB85-P 24GΔ
24
4.590 (116.59)
4.344 (110.34)
4.051 (102.90)
3.911 (99.34)
0.340 (8.64)
0.330 (8.38)
EB85-P 25GΔ
25
4.750 (120.65)
4.500 (114.30)
4.207 (106.86)
4.067 (103.30)
0.340 (8.64)
0.330 (8.38)
EB75D-P 36GΔ
36
6.530 (165.86)
6.219 (157.96)
5.906 (150.01)
5.778 (146.76)
0.438 (11.13)
0.260 (6.60)
EB75D-P 43GΔ
43
7.615 (193.42)
7.302 (185.47)
7.000 (177.80)
6.802 (172.77)
0.500 (12.70)
0.260 (6.60)
RIGHT ANGLE DIMENSIONS
EB75D-PR 6GΔ
6
1.780 (45.21)
1.531 (38.89)
1.218 (30.94)
1.100 (27.94)
0.328 (8.33)
0.260 (6.60)
EB75D-PR 10GΔ
10
2.410 (61.21)
2.156 (54.76)
1.843 (46.81)
1.724 (43.79)
0.328 (8.33)
0.260 (6.60)
EB75D-PR 12GΔ
12
2.720 (69.09)
2.468 (62.69)
2.156 (54.76)
2.036 (51.71)
0.328 (8.33)
0.260 (6.60)
EB75D-PR 15GΔ
15
3.190 (81.03)
2.937 (74.60)
2.624 (66.65)
2.504 (63.60)
0.328 (8.33)
0.260 (6.60)
EB75D-PR 18GΔ
18
3.660 (92.96)
3.406 (86.51)
3.093 (78.56)
2.972 (75.49)
0.328 (8.33)
0.260 (6.60)
EB75D-PR 22GΔ
22
4.280 (108.71)
4.031 (102.39)
3.717 (94.41)
3.596 (91.34)
0.328 (8.33)
0.260 (6.60)
EB75D-PR 36GΔ
36
6.530 (165.86)
6.219 (157.96)
5.906 (150.01)
5.778 (146.76)
0.438 (11.13)
0.260 (6.60)
EB75D-PR 43GΔ
43
7.615 (193.42)
7.302 (185.47)
7.000 (177.80)
6.802 (172.77)
0.500 (12.70)
0.260 (6.60)
ORDERING INFORMATION
When ordering connectors using the above part numbers:
= Indicate “A” for solder eyelet or “E” for card extender. Note: Dimensions are the same for “A” or “E” styles
Δ = Indicate “X” for standard mounting or “XS” for side mounting
Document Number: 36006
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
23
EB4, EB6, EB7, EB8
Vishay Dale
Edgeboard Connectors, 200 °C Burn-In Connectors,
Dual Readout
MOUNTING STYLES in inches (millimeters)
Wire Wrap™
Permanent Mounting
EB4 0.100" (2.54 mm) C-C
EB6 0.125" (3.17 mm) C-C
Oven Wall
Component
Under Test
Wire Wrap™
Leads
Standard High
Temperature
Connector
0.062 (1.57)
Thick
200 °C WIRE WRAP™ MODEL NUMBERS
EB45-PK10GX
EB45-PK35GX
EB65-PK6GX
EB65-PK30GX
EB45-PK12GX
EB45-PK36GX
EB65-PK10GX
EB65-PK31GX
EB45-PK15GX
EB45-PK40GX
EB65-PK12GX
EB65-PK32GX
EB45-PK18GX
EB45-PK43GX
EB65-PK14GX
EB65-PK35GX
EB45-PK20GX
EB45-PK44GX
EB65-PK15GX
EB65-PK36GX
EB45-PK22GX
EB45-PK48GX
EB65-PK18GX
EB65-PK40GX
EB45-PK25GX
EB45-PK49GX
EB65-PK22GX
EB65-PK43GX
EB45-PK28GX
EB45-PK50GX
EB65-PK24GX
EB65-PK44GX
EB45-PK30GX
EB45-PK60GX
EB65-PK25GX
EB65-PK49GX
EB45-PK31GX
EB45-PK65GX
EB65-PK28GX
EB65-PK50GX
Right Angle
PC Board Mounting
Oven Wall
EB4 0.100" (2.54 mm) C-C
EB6 0.125" (3.17 mm) C-C
EB7 0.156" (3.96 mm) C-C
Standard High
Temperature
Connector
(EB4X-P3R25GXS*)
Input Board
Component
Under Test
200 °C RIGHT ANGLE MODEL NUMBERS
EB45-P3R10GXS
EB45-P3R40GXS
EB65-P3R15GX
EB65-P3R43GX
EB45-P3R12GXS
EB45-P3R43GXS
EB65-P3R18GX
EB65-P3R44GX
EB45-P3R15GXS
EB45-P3R44GXS
EB65-P3R22GX
EB65-P3R49GX
EB45-P3R18GXS
EB45-P3R48GXS
EB65-P3R24GX
EB65-P3R50GX
EB45-P3R20GXS
EB45-P3R49GXS
EB65-P3R25GX
EB75D-PR6GXS
EB45-P3R22GXS
EB45-P3R50GXS
EB65-P3R28GX
EB75D-PR10GXS
EB45-P3R25GXS*
EB45-P3R60GXS
EB65-P3R30GX
EB75D-PR12GXS
EB45-P3R28GXS
EB45-P3R65GXS
EB65-P3R31GX
EB75D-PR15GXS
EB45-P3R30GXS
EB65-P3R6GX
EB65-P3R32GX
EB75D-PR18GXS
EB45-P3R31GXS
EB65-P3R10GX
EB65-P3R35GX
EB75D-PR22GXS
EB45-P3R35GXS
EB65-P3R12GX
EB65-P3R36GX
EB75D-PR36GXS
EB45-P3R36GXS
EB65-P3R14GX
EB65-P3R40GX
EB75D-PR43GXS
www.vishay.com
24
For technical questions, contact: [email protected]
Document Number: 36006
Revision: 16-Feb-09
EB4, EB6, EB7, EB8
Edgeboard Connectors, 200 °C Burn-In Connectors,
Dual Readout
Vishay Dale
MOUNTING STYLES in inches (millimeters)
Hard Wire
Permanent Mounting
EB7 0.156" (3.96 mm) C-C
EB8 0.156" (3.96 mm) C-C
Oven Wall
Component
Under Test
Wire Leads
Standard High
Temperature
Connector
0.062 (1.57)
Thick
200 °C HARD WIRE MODEL NUMBERS
EB85-PA6GX
EB85-PA15GX
EB85-PA24GX
EB85-PA10GX
EB85-PA18GX
EB85-PA25GX
EB85-PA12GX
EB85-PA22GX
EB75D-PA36GX
Card Extender Mounting For
Fast Change of Test Setups
EB4 0.100" (2.54 mm) C-C
EB6 0.125" (3.17 mm) C-C
EB7 0.156" (3.96 mm) C-C
EB8 0.156" (3.96 mm) C-C
0.062 (1.57)
Thick
Component
Under Test
Oven Wall
Standard High
Temperature
Connector
Card
Extender
EB75D-PA43GX
Standard
Connector
Card Extender
Contacts
200 °C CARD EXTENDER MODEL NUMBERS
EB45-PE10GX
EB45-PE43GX
EB65-PE22GX
EB65-PE50GX
EB45-PE12GX
EB45-PE44GX
EB65-PE24GX
EB75D-PE36GX
EB45-PE15GX
EB45-PE48GX
EB65-PE25GX
EB75D-PE43GX
EB45-PE18GX
EB45-PE49GX
EB65-PE28GX
EB85-PE6GX
EB45-PE20GX
EB45-PE50GX
EB65-PE30GX
EB85-PE10GX
EB45-PE22GX
EB45-PE60GX
EB65-PE31GX
EB85-PE12GX
EB45-PE25GX
EB45-PE65GX
EB65-PE32GX
EB85-PE15GX
EB45-PE28GX
EB65-PE6GX
EB65-PE35GX
EB85-PE18GX
EB45-PE30GX
EB65-PE10GX
EB65-PE36GX
EB85-PE22GX
EB45-PE31GX
EB65-PE12GX
EB65-PE40GX
EB85-PE24GX
EB45-PE35GX
EB65-PE14GX
EB65-PE43GX
EB85-PE25GX
EB45-PE36GX
EB65-PE15GX
EB65-PE44GX
EB45-PE40GX
EB65-PE18GX
EB65-PE49GX
Document Number: 36006
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
25
EB4, EB6, EB7, EB8
Edgeboard Connectors, 200 °C Burn-In Connectors,
Dual Readout
Vishay Dale
MOUNTING VARIATIONS in inches (millimeters)
EB4 0.100" (2.54 mm) C-C, EB6 0.125" (3.17 mm) C-C
Type “XF”
Clearance Hole
Flush Mounting Flange
Type “X”
Clearance Hole
Raised Mounting Flange
0.060
(1.52)
Ref.
0.125
(3.17)
Dia.
0.430
(10.92)
0.250
(6.35)
Type “XS”
Right Angle
Mounting Flange
0.060
(1.52)
Ref.
0.125
(3.17)
Dia.
0.125
(3.17)
Dia.
0.125
(3.17)
0.430
(10.92)
0.250
(6.35)
0.610
(15.49)
Ref.
0.610
(15.49)
Ref.
Type “XFS”
Right Angle
Mounting Flange
0.060
(1.52)
Ref.
0.060
(1.52)
Ref.
0.125 (3.17)
Dia.
0.250
(6.35)
0.125 (3.17)
0.250 (6.35)
0.610
(15.49)
Ref.
0.610
(15.49)
Ref.
Type “XS”
Side Mounting
EB7 and EB8 0.156" (3.96 mm) C-C
0.128 (3.25)
Dia.
0.125 (3.17)
0.250 (6.35)
Ref.
0.440
(11.18)
TERMINAL VARIATIONS in inches (millimeters)
EB4 0.100" (2.54 mm) C-C
Type “E”
Card Extender
Type “K”
Wire Wrap™
0.025 (0.630) Square Terminals
0.045
(1.14)
0.200
(5.08)
Type “3R”
Right Angle
0.025 (0.630) Square Terminals
0.180 (4.57)
0.590
(14.99)
0.240
(6.10)
0.150
(3.81)
0.570 (14.48)
EB6 0.125" (3.17 mm) C-C
Type “E”
Card Extender
Type “K”
Wire Wrap™
0.025 (0.630) Square Terminals
0.045
(1.14)
0.250
(6.35)
Type “3R”
Right Angle
0.025 (0.630) Square Terminals
0.180 (4.57)
0.590
(14.99)
0.240
(6.10)
0.150
(3.81)
0.570 (14.48)
EB7 and EB8 0.156" (3.96 mm) C-C
Type “A”
Solder Eyelet
To fit 3,
#22 AWG Wires
Type “E”
Card Extender
(Made from Type “A”)
0.200 ± 0.015
(5.08 ± 0.381)
0.125 (3.17)
0.086 x 0.008
(2.18 x 0.20)
0.220 ± 0.015
(5.59 ± 0.381)
www.vishay.com
26
EB7D only
Type “R”
Right Angle
0.100 (2.54)
0.440 (11.18)
0.156
(3.96)
For technical questions, contact: [email protected]
0.050 (1.27)
120° Typ.
15° Typ.
Document Number: 36006
Revision: 16-Feb-09
Competitor Products Cross Reference
Vishay Dale
Edgeboard Connectors
METHODE
1
2
VISHAY DALE
3
4
5
6
2
1
1 80
2 80
2 81
-
0
3
2
0
9
1
12
30
18
- 009
- 009
- 009
EB8 1
EB7 D
EB7 S
2 79
-
1
5
10
-
EBT156*
2
09
1. Insulator material:
1 = Diallyl phthalate
2 = Glass-filled phenolic
2. Product series:
80 = 0.156" C-C dual readout
Note: Terminal style
specifies 0.140" or
0.200" row spacing
81 = 0.156" C-C single readout
with bifurcated bellows
contacs
79 = 0.156" C-C single readout
with tuning fork contacts
3. Mounting style:
0 = 0.128" dia. clearance hole
1 = 0.142" dia. clearance hole
2 = Floating bushing
3 = 4 to 40 threaded insert
6 = No mounting ears
7 = No mounting ears
Use on 79 series only
4. Terminal style:
80 Series
0 = Solder eyelet
2 = 0.160" long dip solder
3 = 0.250" long dip solder
9 = 0.200" long dip solder
Note: 0, 2, and 3 are 0.200"
row spacing. 9 is 0.140" row
spacing
81 Series
0 = Solder eyelet
1 = Dip solder
79 Series
0 = Solder eyelet
3 = Right angle
4 = Wire Wrap™
5 = 0.125" dip solder
5. Number of contact positions:
80 series = 6, 8, 10, 12, 15, 18,
22, and 24
81 series = 6, 8, 10, 12, 18,
22, and 24
79 series = 6, 8, 10, 12, 15, 18,
22, and 24
6. Plating:
009 = Gold (commercial)
04 = Gold (military)
09 = Tin
007 = Gold (industrial)
METHODE
4
5
-
A
K
B
6 GF
15 GF
18 GF
5
4
-
10
B
1
6
3
1
X
Y
Z
173
172
6
3
1. Product series:
1
X
1 = Diallyl phthalate
2 = Glass-filled phenolic
Note: Glass-filled phenolic
standard on EB7S, EB7D
and EBT156. No number
needed.
EB8 = 0.156" C-C x 0.200" row
spacing
EB7D = 0.156" C-C x 0.140" row
spacing
EB7S = 0.156" C-C single
readout with bifurcated
bellows contacts
EBT156 = 0.156" C-C single
readout with tuning
contacts
X = 0.128" dia. clearance hole
V = 0.142" dia. clearance hole
Z = Floating bushing
Y = 4 to 40 threaded insert
W = No mounting ears
EB8 and EB7D Series
A = Solder eyelet
L = 0.156" long dip solder
K = 0.200" long dip solder
K = 0.200" long dip solder
EB7S Series
A = Solder eyelet
B = Dip solder
EBT156 Series
A = Solder eyelet
R = Right angle
E = Wire Wrap™
B = 0.125" dip solder
EB8 =
6, 10, 12, 15, 18, 22,
24 and 25
EB7D = 6, 10, 12, 15, 18, 22,
36 and 43
EB7S = 6, 10, 12, 15, 18, and
22
EBT156 = 6, 10, 12, 15, 18, and
22
GF =
G5 =
T=
G=
0.000010 µ" gold
0.000050 µ" gold
Tin
0.000030 µ" gold
-
VISHAY DALE
2
3
4
0
3
0
3
30
50
-
5
1
2
007
007
EB6
EB4
1
2
-
3
4
5
2
K
C
30
50
G
G
X
Y
173 = 0.125" C-C x 0.250" row
spacing with 0.025 sq.
in. terminals for Wire
Wrap™ and dip solder
EB6 = 0.125" C-C x 0.250" row
spacing with 0.025 sq.
terminals for Wire Wrap™
or dip solder
172 = 0.100" C-C x 0.200" row
spacing with 0.025 sq.
in. terminals for Wire
Wrap™ and dip solder
EB4 = 0.100" C-C x 0.200" row
spacing with 0.025 sq.
terminals for Wire Wrap™
or dip solder
2. Mounting style and insulator
material:
0 = 0.128" dia. clearance hole
and diallyl phthalate
X = 0.125" dia. clearance hole
1 = Diallyl phthalate
2 = 0.128" dia. clearance hole
and phenolic
X = 0.125" dia. clearance hole
2 = Phenolic
1 = 4 to 40 threaded insert
and diallyl phthalate
Y = 4 to 40 threaded insert
1 = Diallyl phthalate
3 = 4 to 40 threaded insert
and phenolic
Y = 4 to 40 threaded insert
2 = Phenolic
3.Terminal style:
0 = Wire Wrap™
K = Wire Wrap™
Series 173, 4 = Dip solder
C = Dip solder
Series 172, 3 = Dip solder
C = Dip solder
4. Number of contact positions:
Series 173 = 30, 40, and 50
Series 172 = 5, 10, 15, 18, 22,
25, 30, 31, 35, 36,
40, 43, 48, and 50
EB6 = 6, 10, 14, 15, 18, 22, 24,
25, 28, 30, 31, 32, 35, 36,
40, 43, 44, 49, and 50
EB4 = 10, 12, 15, 18, 20, 22, 25,
28, 30, 31, 35, 36, 40, 43,
44, 48, 49, 50, and 60
5. Contact plating:
007 = Gold over nickel
(industrial)
G = 0.000030 µ" gold over
nickel
Notes
• This cross reference guide is designed to cross the competitor model number to the Vishay Dale model number. Each model number is
segmented in order to give a comparable explanation of what each part of the model number means.
• See the explanation listed below the perspective models.
Document Number: 36000
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
27
Competitor Products Cross Reference
Edgeboard Connectors
Vishay Dale
AMPHENOL
1
VISHAY DALE
2
3
4
225 - 2 06
225 - 2 10
225 - 2 15
2
5
2
1
2
3
1
2
3
-
5 6
1&3
1 01
1 04
1 11
EB7
EB7
EB8
4
143 - 015 - 01 - 123
1. and 3. Product series:
225-2*2 = 0.156" C-C x 0.140"
row spacing
Insulator material: Diallyl
phthalate
225-2*5 = 0.156" C-C single
readout
Insulator material: Diallyl
phthalate
225-2*2*-*11 =
0.156" C-C x 0.200"
row spacing
Insulator material: Diallyl
phthalate
2. Number of contact positions:
225-2 = 6, 10, 15, 18, 22, 25, 28,
36, and 43
4. Mounting style:
1 = 0.128" dia. clearance hole
2 = Floating bushing
3 = 4 to 40 threated insert
5. Plating options:
1 = 30 µ" gold
6. Terminal style:
01 = Solder eyelet
03 = 0.375" long x 0.140" row
spacing, dip solder
04 = 0.235"
long
single
readout dip solder
10 = 0.091" long x 0.140" row
spacing,dip solder
11 = 0.375" long x 0.200" row
spacing,dip solder
143 Series
1.Product series:
143 = 0.156"
C-C
single
readout with tuning fork
style
Insulator material: Diallyl
phthalate
2. Number of contact positions:
143 = 6, 10, 12, 15, 18, 22, 28
and 36
3.Terminal style:
01 = Solder eyelet
03 = 0.388" long dip solder
07 = 0.107" long dip solder
09 = 0.763" long wire wrap
13 = 0.542" long wire wrap
4. Plating options:
101 = 10 µ" gold over copper
123 = Bright tin
6
1 D 1 S 1 * -
1
WINCHESTER
2
5
4
1
A 6 G
B 10 G
K 15 G
X
Z
Y
HCB
HK
HCA
2
3
VISHAY DALE
4
5
1
1
1
22 S 1
10 D 0
15 D2 2
*
*
*
EB7
EB7
EB8
3
*
3
D - A
S - B
* - K
2
3
4
1
15
A
1
X
HCB = 0.156" C-C x 0.140" row
spacing
Insulator material: Glass
reinforced
thermoplastic
EB7*S = 0.156" C-C single
readout
1 = Diallyl phthalate
HK = 0.156" C-C single
readout
Insulator: Glass-filled
phenolic
HCA = 0.156" C-C x 0.200" row
spacing
Insulator material: Glass
reinforced
thermoplastic
EBT156
-
EB7*D = 0.156" C-C x 0.140"
row spacing
1 = Diallyl phthalate
EB8*
= 0.156" C-C x 0.200"
row spacing
1 = Diallyl phthalate
EB7D = 6, 10, 12, 15, 18, 22, 36,
and 43
3
2
5
22 GF
10 GF
15 GF
4
Z
*
Y
1. Product series:
EB7*D = 0.156" C-C x 0.140" row
spacing
3 = Glass-filled polyester
(thermoplastic)
EB7*S = 0.156" C-C x 0.200"
single readout
Insulator : Glass-filled phenolic
EB8
= 0.156" C-C x 0.200" row
spacing
3 = Glass-filled polyester
(thermoplastic)
2.Number of contact positions:
EB7S = 6, 10, 12, 15, 18 and 22
HCB = 6, 10, 15, 18, 22,
28, 36, and 43
EB7*D = 6, 10, 12, 15, 18, 22,
28, 36, and 43
EB8 = 6, 10, 12, 15, 18, 22, 24,
and 25
HK =
EB7*S = 10, 12, 15, 18, and 22
X = 0.128" dia. clearance hole
Z = Floating bushing
Y = 4 to 40 threaded insert
HCA = 6, 10, 15, 22, and 25
G = 30 µ" gold over nickel
A = Solder eyelet
K = 0.375" long x 0.140" row
spacing dip solder
B = 0.220" long single readout
dip solder
C = 0.125" long x 0.140" row
spacing dip solder
K = 0.200" long x 0.200" row
spacing dip solder
EBT Series
EBT 156 = 0.156" C-C single
readout with tuning
fork style
Insulator material: Phenolic
143 = 6, 10, 12, 15, 18, and 22
A = Solder eyelet
C = 0.406" long dip solder
B = 0.125" long dip solder
F = 0.800" long wire wrap
E = 0.500" long wire wrap
6, 10, 15, 18, 22,
28, 36, and 43
EB8 =
6, 10, 12, 15, 18, 22
24, and 25
3.Terminal style:
HCB
S = Solder eyelet
D1 = 0.125" long dip solder
D2 = 0.200" long dip solder
D3 = 0.375" long dip solder
EB7*D
A = Solder eyelet
C = 0.125" long dip solder
K = 0.200" long dip solder
B = 0.375" long dip solder
HK
S = Solder eyelet
D = 0.190" long dip solder
EB7*S
A = Solder eyelet
B = 0.220" long dip solder
HCA
S = Solder eyelet
D1 = 0.156" long dip solder
D2 = 0.200" long dip solder
EB8
A = Solder eyelet
L = 0.156" long dip solder
K = 0.200" long dip solder
2. Mounting style:
0 = 0.128" dia. clearance hole
X = 0.128" dia. clearance hole
1 = Floating bushing
Z = Floating bushing
2 = 4 to 40 threaded insert
Y = 4 to 40 threaded insert
5. Plating:
* = No number required
standard plating gold over
copper
GF = 0.000010 µ" gold over
nickel
2 = 10 µ" gold over copper
1 = Bright tin
Notes
• This cross reference guide is designed to cross the competitor model number to the Vishay Dale model number. Each model number is
segmented in order to give a comparable explanation of what each part of the model number means.
• See the explanation listed below the perspective models.
www.vishay.com
28
For technical questions, contact: [email protected]
Document Number: 36000
Revision: 16-Feb-09
Competitor Products Cross Reference
Edgeboard Connectors
ELCO
VISHAY DALE
1
2
3
4
1
1
6307
6064
050
100
472
061
001
003
EB4
EB6
1
1
6007
024
450
1
4
012
EB8
1
1. Product series:
6307 = 0.100" C-C x 0.200" row
spacing with 0.025" sq.
Terminals, Diallyl
Phthalate Standard
Insulator material,
0.000010 µ"
Gold
over
Nickel
Standard plating
6064 = 0.125" C-C x 0.250" row
spacing, Diallyl with
0.025 sq. terminals
Phthalate Standard
Insulator material,
0.000010 µ"
Gold
over
Nickel
Standard plating
6007 = 0.156" C-C x 0.200" row
spacing with 0.025" sq.
Terminals, Diallyl
Phthalate Standard
Insulator material,
0.000010 µ"
Gold
over
Nickel
Standard plating
2.Number of contact positions:
Series 6307 = 25, 30, 36, 43,
and 50
Series 6064 = 15, 28, 36, 40,
43 and 50
Series 6007 = 6, 10, 12, 15, 18,
22, 28, 36,
and 43
3. Contact code:
Series 6307
472 = 0.550" long wire wrap™
terminal
Series 6064
061 = 0.580" long wire wrap™
terminal
475 = 0.230" long dip solder
terminal
Series 6007
450 = Solder eyelet terminal
451 = 0.202 long dip solder
4. Mounting style:
Series 6307
001 = 0.128" dia. clearance
hole
002 = 4 to 40 threated insert
Series 6064
001 = 0.128" dia. clearance
hole
003 = 4 to 40 threated insert
Series 6007
012 = 0.128" dia. clearance
hole
013 = floating bushing
018 = 4 to 40 threated insert
MICRO PLASTICS
3
2
1
4
1
-
K
K
25
50
G
G
X
Y
3
2
1
MP
MP
MP
MP
-
A
12 GF
4
X
EB4 = 0.100" C-C x 0.200" row
spacing with 0.025" sq.
Terminals
1 = Diallyl Phthalate
G = 0.000030 µ"
Gold over Nickel
EB6 = 0.125" C-C x 0.250" row
spacing with 0.025" sq.
Terminals
1 = Diallyl Phthalate
G = 0.000010 µ"
Gold over Nickel
EB8 = 0.156" C-C x 0.200" row
spacing
1 = Diallyl Phthalate
G = 0.000010 µ"
Gold over Nickel
EB4 = 10, 12, 15, 18,
25, 28, 30, 31,
40, 43, 44, 48,
and 60
EB6 = 6, 10, 14, 15,
24, 25, 28, 30,
35, 36, 40, 43,
and 50
EB8 = 6, 10, 12, 15,
24 and 25
EB4
K =
EB6
K =
20, 22,
35, 36,
49, 50,
18, 22,
31, 32,
44, 49,
18, 22,
0.570" long wire wrap™
terminal
C =
0.570" long wire wrap™
terminal
Long dip solder terminal
EB8
A =
C =
Solder eyelet terminal
Long dip solder
EB4
X =
Y =
EB6
X =
Y =
EB8
X =
Vishay Dale
0.125" dia. clearance
hole
4 to 40 threated insert
0.125" dia. clearance
hole
4 to 40 threated insert
Z =
0.128" dia. clearance
hole
floating bushing
Y =
4 to 40 threated insert
-
0100
0125
0156
0156
-
VISHAY DALE
2
3
4
5
1, 3
10
40
22
15
D
D
D
5
W
W
P
S
5
6
3
4
EB4 3
EB6 3
EB7 3D
EB7 3S
1. Product series:
3. Dual or single:
MP-0100*-D = 0.100" C-C x
0.200" row spacing
Insulator material: Glass filled
thermoplastic
Plating: 10 µ" Gold over Nickel
MP-0125*-D = 0.125" C-C x 250"
row spacing
Insulator material: Glass filled
thermoplastic
Plating: 10 µ" Gold over Nickel
MP-0156*-D = 0.156" C-C x 145"
row spacing
Insulator material: Glass filled
thermoplastic
Plating: 10 µ" Gold over Nickel
MP-0156*-S = 0.156" C-C single
readout
Insulator material: Glass filled
thermoplastic
Plating: 10 µ" Gold over Nickel
1
-
4
2
1
5
K
K
A
B
10
40
22
15
GF
GF
GF
GF
X
Y
Z
W
EB43-**GF = 0.100" C-C x 0.200"
row spacing
3 = Glass filled
polyester
GF = 10 µ" Gold
over Nickel
EB63-**GF = 0.125" C-C x 0.200"
row spacing
3 = Glass filled
polyester
GF = 10 µ" Gold
over Nickel
EB73D-**GF = 0.156" C-C x
0.140" row spacing
3 = Glass filled
polyester
GF = 10 µ" Gold
over Nickel
EB73S-**GF =0.156" C-C single
readout
3 = Glass filled
polyester
GF = 10 µ" Gold
over Nickel
2. Number of contact positions:
MP-0100 =
10, 15, 18, 22,
25, 28, 30, 36,
40, 43, 44, 50,
60, 65, and 70
MP-0125 =
10, 15, 18, 22,
28, 30, 31, 35,
36, 40, 43, and
50
MP-0156-*D = 6, 10, 12, 15,
18, 22, 24, 25,
28, 36, and 43
MP-0156-*S = 6, 10, 12, 15,
18, 22, 24, 25,
28, 36, and 43
10, 12, 15, 18, 20, 22,
25, 28, 30, 31, 35, 36,
40, 43, 44, 48, 49, 50
and 60
EB6 = 6, 10, 14, 15, 18, 22,
24, 25, 28, 30, 31, 32,
35, 36, 40, 43, 44, 49,
and 50
EB7*D = 6, 10, 12, 15, 18, 22, 36
and 43
EB7*S = 6, 10, 12, 15, 18, and
22
4.Terminal style:
MP-0100 and MP-0125
W = 0.025 sq. x 0.560" long
MP-0156*D
P = solder eyelet
S = 0.210" long dip solder
MP-0156*S
P = solder eyelet
S = 0.210" long dip solder
EB4 and EB6
K = 0.025 sq. x 0.570" long
EB7D
A = solder eyelet
K = 0.200" long dip solder
EB7S
A = solder eyelet
B = 0.220" long dip solder
5.Mounting style:
MP-0100 and MP-0125
4 = no mounting ears
5 = 0.125" clearance hole
6 = 4 to 40 threaded insert
MP-0156-*D and MP-0156-*S
1 = 0.125" clearance hole
2 = 4 to 40 threaded insert
3 = floating bushing
4 = no mounting ears
EB4 =
EB4 and EB6
W = no mounting ears
X = 0.125" clearance hole
Y = 4 to 40 threaded insert
EB7D and EB7S
X = 0.128" clearance hole
Y = 4 to 40 threaded insert
Z = floating bushing
W= no mounting ears
Notes
• This cross reference guide is designed to cross the competitor model number to the Vishay Dale model number. Each model number is
segmented in order to give a comparable explanation of what each part of the model number means.
• See the explanation listed below the perspective models.
Document Number: 36000
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
29
Competitor Products Cross Reference
Edgeboard Connectors
Vishay Dale
EDAC
VISHAY DALE
1
2
3
4
5
345
346
305
306
307
060
100
030
018
050
540
520
500
525
520
2
8
2
1
2
02
01
03
01
08
1
1
EB4 1
EB6 1
EB7 1D
EB7 1S
EB8 1
-
EDAC
3
2
1 4, 5
K
C
A
B
K
30
50
15
18
25
SG XF
SG W
SG Z
SG W
GF Y
1. Product series:
345 = 0.100" C-C x 0.200" row
spacing
Insulator material:
Diallyl Phthalate
Contact plating:
0.000030 µ" gold inlay,
nickel tin alloy contacts
EB4 = 0.100" C-C x 0.200" row
spacing
1
= Diallyl Phthalate
SG = 0.000030 µ" gold on
contact area with gold
flash on terminal
346 = 0.125" C-C x 0.250"
row spacing
Insulator material:
Diallyl Phthalate
Contact plating:
0.000030 µ" gold inlay,
nickel tin alloy contacts
EB6 = 0.125" C-C x 0.250" row
spacing
1
= Diallyl Phthalate
SG = 0.000030 µ" gold on
contact area with gold
flash on termnal
305 = 0.156" C-C x 0.140"
row spacing
Insulator material:
Diallyl Phthalate
Contact plating:
0.000030 µ" gold inlay,
nickel tin alloy contacts
EB7*D = 0.156" C-C x 0.140" row
spacing
1
= Diallyl Phthalate
SG = 0.000030 µ" gold on
contact area with gold
flash on termnal
306 = 0.156" C-C
single readout
Insulator material:
Diallyl Phthalate
Contact plating:
0.000010
µ"
to
0.000020 µ" gold over
nickel
EB7*S = 0.156" C-C
single readout
1
= Diallyl Phthalate
GF = 0.000010 µ" gold over
nickel
3407 = 0.156" C-C x 0.200" row
spacing
Insulator material:
Diallyl Phthalate
Contact plating:
0.000010
µ"
to
0.000020 µ" gold over
nickel
EB8 = 0.156" C-C x 0.200" row
spacing
1
= Diallyl Phthalate
GF = 0.000010 µ" gold over
nickel
2.Number of contact positions:
345 = 5, 6, 8, 10, 12, 13, 14,
15, 16, 17, 18, 19, 20,
22, 24, 25, 28, 30, 31,
32, 33, 35, 36, 37, 38,
40, 41, 43, 48, 49, 50,
51, 60, 61, and 65
346 = 6, 7, 10, 15, 22, 24, 25,
28, 30, 31, 35, 36, 40,
43, and 50
305 = 6, 10, 12, 15, 18, 22,
25, 28, 30, 36, and 43
VISHAY DALE
1
2
3
4
5
345
346
305
306
307
060
100
030
018
050
540
520
500
525
520
2
8
2
1
2
02
01
03
01
08
1
1
EB4 1
EB6 1
EB7 1D
EB7 1S
EB8 1
-
3
2
1 4, 5
K
C
A
B
K
30
50
15
18
25
SG XF
SG W
SG Z
SG W
GF Y
3. Terminal style:
345 and 346
520 = 0.025" sq. x 0.210" long
dip solder
521 = 0.025" sq. x 0.150 "long
dip solder
540 = 0.025" sq. x 0.560" long
wire wrap™
EB4 and EB6
C =
0.025" sq. x 0.175"
long dip solder
D =
0.025" sq. x 0.115" long
dip solder
K =
0.025" sq. x 0.560" long
wire wrap™
305, 306, and 307
500 = Solder eyelet
520 = 0.213" long dip solder
521 = 0.125" long dip solder
525 = 0.213" long dip solder
with 30 µ" gold inlay
EB7*D, EB7*S and EB8
A =
Solder eyelet
K =
0.200" long dip solder
C =
0.125" long dip solder
K =
0.200" long dip solder
specify SG for 30 µ"
selective gold in
contact area
4. Readout insulator style:
EB4 =
Dual readout, see
mounting style for flush
or offset designation
EB6 =
Dual readout, see
mounting style for flush
or offset designation
345, 2 = Dual readout flush
mounting
8
=
Dual readout offset
mounting
346, 2 = Dual readout flush
mounting
8
=
Dual readout offset
mounting
305, 2 = Dual readout flush
mounting
301, 2 = Center single readout
flush mounting
EB7*D = Dual readout
mounting
EB7*S = Center single readout
flush mounting
EB8 =
Dual readout,
mounting
0.128" Dia. clearance
hole
W =
No mounting lugs
03 =
Floating bushing
X =
0.128" Dia. clearance
hole
08 =
4 to 40 threated insert
XF =
0.128" clearance hole
with flush mounting
for EB4 and EB6
Z =
Floating bushing
Y =
4 to 40 threated insert
YF =
4 to 40 threated insert
with flush mounting for
EB4 and EB6
307, 2 = Dual readout flush
mounting
EB4 = 10, 12, 15, 18, 20, 22,
25, 28, 30, 31, 35, 36,
40, 43, 44, 48, 49, 50,
and 60
EB6 = 6, 10, 14, 15, 18, 22,
24, 25, 28, 30, 31, 32,
35, 36, 40, 43, 44, 49,
and 50
EB7*D = 6, 10, 15, 18, 22, 36
and 43
306 = 6, 8, 10, 12, 15, 18, 22,
24, 25, 28, 30, 36, and
43
EB7*S = 6, 10, 12, 15, 18, and
22
307 = 6, 7, 10, 11, 12, 13, 14,
15, 18, 20, 22, 24, 25,
28, 30, 36, and 43
EB8 = 6, 10, 12, 15, 18, 22,
24, and 25
flush
flush
5.Mounting style:
01 = No mounting lugs
02 =
Notes
• This cross reference guide is designed to cross the competitor model number to the Vishay Dale model number. Each model number is
segmented in order to give a comparable explanation of what each part of the model number means.
• See the explanation listed below the perspective models.
www.vishay.com
30
For technical questions, contact: [email protected]
Document Number: 36000
Revision: 16-Feb-09
Competitor Products Cross Reference
Edgeboard Connectors
HOLMBERG
VISHAY DALE
1
1
2
3
4
5
6
A8
A7
B3
A2
A2
D
D
D
S
D
10
22
18
15
36
DS
WW
PE
DS
PE
29
29
08
09
49
A
B
C
A
B
J
J
1
1
1
1
1
EB4 3
EB6 3
EB8 3
EB7 3S
EB7 3D
-
3, 6
2
C
K
A
B
A
10
22
18
15
36
HOLMBERG
4
5
SG X
SG Y
GF W
G X1
SG Y
1. Product series:
A8D = 0.100" C-C x 0.200" row
spacing
Insulator material:
Glass-filled
thermoplastic
EB4 = 0.100" C-C x 0.200" row
spacing
3 = Glass-filled polyester
A7D = 0.125" C-C x 0.250"
row spacing
Insulator material:
Glass-filled
thermoplastic
EB6 = 0.125" C-C x 0.250" row
spacing
3 = Glass-filled polyester
B3D = 0.156" C-C x 0.200"
row spacing
Insulator material:
Glass-filled
thermoplastic
EB8 = 0.156" C-C x 0.200" row
spacing
3 = Glass-filled polyester
A2S = 0.156" C-C single
readout
Insulator material:
Glass-filled
thermoplastic
EB7*S = 0.156" C-C single
readout
3 = Glass-filled polyester
A2D = 0.156" C-C x 0.140" row
spacing
Insulator material:
Glass-filled
thermoplastic
EB7*D = 0.156" C-C x 0.140" row
spacing
3 = Glass-filled polyester
1
2
3
4
5
6
A8
A7
B3
A2
A2
D
D
D
S
D
10
22
18
15
36
DS
WW
PE
DS
PE
29
29
08
09
49
A
B
C
A
B
J
J
1
1
1
3., 6.Terminal style and length:
A8D and A7D
DS = Solder dip
J = 0.160 long
WW = Wire wrap™
J = 0.560" long
B3D
DS = Solder dip x 0.155" long
PE = Solder eyelet
A2D
DS = Solder dip x 0.220" long
PE = Solder eyelet
EB4 = 10, 12, 15, 18, 20, 22,
25, 28, 30, 31, 35, 36,
40, 43, 44, 48, 49, 50,
and 60
A7D = 10, 15, 18, 20, 22, 25,
28, 30, 35, 36, 40,43,
and 50
EB6 = 6, 10, 14, 15, 18, 22,
24, 25, 28, 30, 31, 32,
35, 36, 40, 43, 44, 49,
and 50
B3D = 6, 10, 12, 15, 18, 22,
24, 25, 28, 36, and 43
EB8 =
6, 10, 12, 15, 18, 22, 24
and 25
EB7*S = 6, 10, 12, 15, 18, and
22
1
1
EB4 3
EB6 3
EB8 3
EB7 3S
EB7 3D
-
3, 6
2
C
K
A
B
A
10
22
18
15
36
4
5
SG X
SG Y
GF W
G X1
SG Y
EB4 and EB6
C = Solder dip x 0.175" long
K = Wire wrap™ x 0.570"
long
EB8
K =
A =
Solder dip x 0.200" long
Solder eyelet
EB7*S
B = Solder dip x 0.220" long
A = Solder eyelet
EB7*D
K = Solder dip x 0.220" long
A = Solder eyelet
4. Plating options:
29 =
08 =
49 =
09 =
A8D = 10, 12, 15, 20, 22, 25,
28, 30, 35, 36, 40, 43,
50 and 60
A2D = 6, 10, 12, 15, 18, 22,
25, 28, 36, and 43
VISHAY DALE
1
A2S
DS = Solder dip x 0.220" long
PE = Solder eyelet
2.Number of contact positions:
A2S = 6, 10, 12, 15, 18, 22,
and 25
Vishay Dale
Selective 30 µ" Gold
over Nickel in contact
areas with 0.002 to
0.003
Sn/Pb
on
terminals
10 µ" Gold over Nickel
30 µ" Gold over Nickel
in contact area with
Gold
flash
on
terminals
30 µ" Gold over Nickel
SG = Selective 30 µ" Gold
over Nickel in contact
areas with 0.002 to
0.003 Sn/Pb on
terminals
GF = 10 µ" Gold overNickel
SG = 30 µ" Gold over Nickel
in contact area with
Gold flash on
terminals
G = 30 µ" Gold over Nickel
5.Mounting style:
A8D, A7D and B3D
A = 0.125" Dia. clearance
hole
B = 4 to 40 threaded insert
C = No mounting ears
EB4, EB6 and EB8
X = 0.125" Dia. clearance
hole
Y = 4 to 40 threaded insert
W = No mounting ears
A2S and A2D
A = 0.125" Dia. clearance
hole without pads
B = 4 to 40 threaded insert
C = No mounting ears
EB7*S and B7*D
X1 = 0.125" Dia. clearance
hole without pads
Y = 4 to 40 threaded insert
W = No mounting ears
EB7*D = 6, 10, 12, 15, 18, 22,
36, and 43
Notes
• This cross reference guide is designed to cross the competitor model number to the Vishay Dale model number. Each model number is
segmented in order to give a comparable explanation of what each part of the model number means.
• See the explanation listed below the perspective models.
Document Number: 36000
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
31
Competitor Products Cross Reference
Edgeboard Connectors
Vishay Dale
TEKA
1
TP1
TP2
TP5
TP3
TP4C
-
VISHAY DALE
2
3
4
5
25
30
40
22
10
1
2
1
3
1
W
S
W
E
S
04
03
04
02
03
1
1
EB4 3
EB4 3
EB6 3
EB8 3
EB7 3S
-
TEKA
4
2
5
3
K
C
K
A
B
25 SG XF
30 G Y
40 SG X
22 GF Z
10 G X
1. Product series:
TP1 = 0.100 "C-C x 0.200" row
spacing with flush
mounting
Insulator material:
Glass-filled
thermoplastic
1
TP1 TP2 TP5 TP3 TP4C -
VISHAY DALE
2
3
4
5
25
30
40
22
10
1
2
1
3
1
W
S
W
E
S
04
03
04
02
03
1
1
EB4 3
EB4 3
EB6 3
EB8 3
EB7 3S
-
4
2
K
C
K
A
B
25 SG XF
30 G Y
40 SG X
22 GF Z
10 G X
5
3
3. Mounting style:
EB4 = 0.100" C-C x 0.200 row
spacing . Add the letter
F to the mounting style
designator for flush
mount
1=
2=
TP1
0.128" Dia .clearance
hole
with
flush
mounting
4 to 40 threaded insert
with flush mounting
XF =
YF =
EB4
0.125" Dia. clearance
hole with flush
mounting
4 to 40 threaded insert
with flush mounting
3 = Glass-filled polyester
TP2 = 0.100" C-C x 0.200" row
spacing with offset
mounting
Insulator material:
Glass-filled
thermoplastic
1=
EB4 = 0.100" C-C x 0.200" row
spacing. Offset
mounting standard
2=
TP2 and TP5
0.128" Dia .clearance
hole
with
offset
mounting
4 to 40 threaded insert
with offset mounting
X =
Y =
EB4 and EB6
0.128" Dia. clearance
hole
with
offset
mounting
4 to 40 threaded insert
with offset mounting
3 = Glass-filled polyester
TP5 = 0.125" C-C x 0.250" row
spacing with offset
mounting
Insulator material:
Glass-filled
thermoplastic
TP3 = 0.156" C-C x 0.200" row
spacing
Insulator material:
Glass-filled
thermoplastic
TP4C= 0.156" C-C single
readout
Insulator material:
Glass-filled
thermoplastic
1=
EB6 = 0.125" C-C x 0.250" row
spacing. Offset
mounting standard
TP3 and TP4C
0.128" Dia. clearance
hole
2=
4 to 40 threaded insert
3 = Glass-filled polyester
3=
Floating bushing
EB8 = 0.156" C-C row spacing
3 = Glass-filled polyester
EB7*S = 0.156" C-C
readout
Single
3 = Glass-filled polyester
X =
EB8 and EB7*S
0.128" clearance hole
Y =
4 to 40 threaded insert
Z =
Floating bushing
4.Terminal style:
TP1, TP2 and TP5
S = Solder dip x 0.170" long
W = Wire wrap™ x 0.560
long
EB4 and EB6
C = Solder dip x 0.175" long
K = Wire wrap™ x 0.570"
long
TP3
S = Solder dip x 0.170" long
E = Solder eyelet
EB8
K =
A =
TP4C
S = Solder dip x 0.170" long
E = Solder eyelet
EB7*S
B = Solder dip x 0.220" long
A = Solder eyelet
Solder dip x 0.200" long
Solder eyelet
2.Number of contact positions:
TP1 = 8, 10, 15, 18, 22, 25,
28, 30, 35, 36, 40, 43,
and 50
TP2 = 10, 15, 18, 22, 25, 28,
30, 35, 36, 40, 43, and
50
TP5 = 15, 18, 22, 25, 28, 30,
31, 35, 36, 40, 43, and
50
TP3 = 6, 10, 12, 15, 18, 22,
25, 28, 30, 36, and 43
TP4C = 6, 10, 12, 15, 18, 22,
25, 28, 30, 36, and 43
EB4 = 10, 12, 15, 18, 20, 22,
25, 28, 30, 31, 35, 36,
40, 43, 44, 48, 49, 50
and 60
EB4 = 10, 12, 15, 18, 22, 25,
28, 30, 31,35, 36, 40,
43, 44, 48, 49, 50 and
60
EB6 = 6, 10, 14, 15, 18, 22,
24, 25, 28, 30, 31, 32,
35, 36, 40, 43, 44, 49
and 50
EB8 = 6, 10, 12, 15, 18, 22,
24 and 25
5.Plating options:
02 = 10 µ" Gold
GF = 10 µ" Gold over Nickel
03 = 30 µ" Gold
G=
04 = 30 µ" Gold selective
on Copper Nickel
alloy
30 µ" Gold over
Nickel
SG = 30 µ" Gold over
Nickel in contact area
with Gold flash on
terminals
EB7*S = 6, 10, 12, 15, 18 and
22
Notes
• This cross reference guide is designed to cross the competitor model number to the Vishay Dale model number. Each model number is
segmented in order to give a comparable explanation of what each part of the model number means.
• See the explanation listed below the perspective models.
www.vishay.com
32
For technical questions, contact: [email protected]
Document Number: 36000
Revision: 16-Feb-09
Competitor Products Cross Reference
Edgeboard Connectors
VIKING
VISHAY DALE
1
2
3
4
5
6
3
3
3
3
2
2
VN
KT
KH
VT
VH
KH
50
36
28
49
22
10
/1
/ 02
/9
/ 02
/9
/9
J
J
C
C
A
A
ND
NH
ND
NJ
N
K
7
5
03
1
12
8
5
1.5
4
EB4
EB4
EB6
EB6
EB7D
EB7S
1
3
2
3
*
*
-
VIKING
6
3
2
K
K
K
C
A
B
50
36
28
49
22
10
G
SGF
GF
SG
G
GF
1
2
3
4
5
6
X
Y
XF
W
Z
X1
3
3
3
3
2
2
VN
KT
KH
VT
VH
KH
50
36
28
49
22
10
/1
/ 02
/9
/ 02
/9
/9
J
J
C
C
A
A
ND
NH
ND
NJ
N
K
All models
contacts
5. PC board openings and
contact spacing all models
shown except 0.062" boards
All models shown except 0.062"
boards
C=
A=
0.100" C-C x 0.200"
row spacing
0.125" C-C x 0.250"
row spacing
0.156 C-C single and
dual
2.Plating options:
KH = 10 µ" Gold over Nickel
between
EB4 = 0.100" C-C x 0.200" row
spacing
EB6 = 0.125" C-C x 0.250" row
spacing
EB7D = 0.156" C-C x 140" row
spacing
EB7S = 0.156" C-C x single
readout
GF
= 10 µ" Gold over Nickel
VH = 30 µ" Gold over Nickel
G
= 30 µ" Gold over Nickel
KT = 10 µ" Gold over Nickel
in contact area. Tin on
terminals
SGF = 10 µ" Gold over Nickel
in contact area. Gold
flash on terminals
VT = 30 µ" Gold over Nickel
in contact area. Tin on
terminals
SG
= 30 µ" Gold over Nickel
in contact area. Gold
flash on terminals
EB4
= 10, 12, 15, 18, 20, 22,
25, 28, 30, 31, 35, 36,
40, 43, 44, 48, 49, 50,
and 60
3. Number of contact positions:
J spacing,
3KH, 3VH and 3VN =
15, 18, 20, 22, 25, 28, 30,
31, 35, 36, 40, 43, 44, 49,
50, 55, 60, 65,and 70
J spacing,
3KT, and 3VT =
8, 15, 17, 18, 20, 22, 25,
28, 30, 31, 35, 36, 40, 43,
44, 49, 50, 55, 60, 65,
and 70
C spacing,
3KH, 3VH, 3KT and
3VT =
6, 10, 14, 15, 18, 22, 24,
28, 30, 31, 32, 35, 36, 40,
43, 44, 49, and 50
A spacing,
2KH, 2VH, and 2VN
Dual readout =
6, 10, 15, 18, 22, 36 and
43
A spacing,
2KH, 2VH
Single readout =
6, 10, 15, 18, 22, and 36
EB4
= Same as above
EB6
=
VISHAY DALE
7
1. Keying between contacts, all
numbers
J=
keying
Vishay Dale
6, 10, 14, 15, 18, 22,
24, 25, 28, 30, 31, 32,
35, 36, 40, 43, 44, 49,
and 50
EB7D = 6, 10, 12, 15, 18, 22,
36, and 43
EB7D = 6, 10, 12, 15, 18, and
22
7
5
03
1
12
8
5
4. Insulator material:
1 = Diallyl phthalate
9 = Phenolic
02 = Glass reinforced
polyester
1.5
4
EB4
EB4
EB6
EB6
EB7D
EB7S
1
3
2
3
*
*
1=
2=
3=
-
6
3
2
K
K
K
C
A
B
50
36
28
49
22
10
G
SGF
GF
SG
G
GF
7
X
Y
XF
W
Z
X1
Diallyl phthalate
Phenolic
Glass-filled polyester
6.Terminal style:
3**/*J Series
ND = 0.025" sq. x 0.570"
long
NH = 0.025" sq. x 0.625"
long
NJ = 0.025" sq. x 0.275"
long
EB4 Series
K = 0.025" sq. x 0.570"
long
K = 0.025" sq. x 0.625"
long
C = 0.025" sq. x 0.175"
long
3**/*C Series
ND = 0.025" sq. x 0.570"
long
NH = 0.025" sq. x 0.650"
long
NJ = 0.025" sq. x 0.250"
long
EB6 Series
K = 0.025" sq. x 0.375"
long
K = 0.025" sq. x 0.125"
long
C = 0.025" sq. x 0.200"
long
2**/*A dual readout
N = solder eyelet
V = 0.380" long dip solder
E = 0.132" long dip solder
DD = 0.195" long dip solder
EB7D Series
A = solder eyelet
B = 0.380" long dip solder
C = 0.132" long dip solder
K = 0.195" long dip solder
2**/*A single readout
K = 0.220" long dip solder
B = solder eyelet
EB7S Series
B = 0.220" long dip solder
A = solder eyelet
7. Mounting style:
3**/*J and 3**/*C Series
1 = 0.125" Dia. clearance
hole
with
flush
mounting
3 = 0.125" Dia. clearance
hole
with
offset
mounting
5 = 4 to 40 threaded insert
with offset mounting
12 = No mounting flange
EB4 and EB6
XF = 0.125 Dia. clearance
hole with flush
mounting
Y = 4 to 40 threaded
insert
with offset mounting
X = 4 to 40 threaded
insert with offset
mounting
W = No mounting flange
2**/*A Dual and single readout
3 = 4 to 40 threaded
inserts
5 = 0.128" Dia. clearance
hole
8 = Floating bushing
12 = No mounting flange
EB7D and EB7S Series
Y = 4 to 40 threaded
inserts
X = 0.128 Dia. clearance
hole
Z = Floating bushing
W = No mounting flange
Notes
• This cross reference guide is designed to cross the competitor model number to the Vishay Dale model number. Each model number is
segmented in order to give a comparable explanation of what each part of the model number means.
• See the explanation listed below the perspective models.
Document Number: 36000
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
33
Competitor Products Cross Reference
Edgeboard Connectors
Vishay Dale
SULLINS
VISHAY DALE
SULLINS
1
2
3
4
5
6
7
1. 3, 5
6
4
E
E
E
E
E
S
S
M
M
S
C
A
M
M
M
22
40
18
10
36
D
D
D
S
D
RM
RS
RX
SU
RY
H
D
F
N
1
EB4 3 EB6 3 EB8 3 EB7 3S EB7 3D -
K
C
C
B
B
22 GF X
40 GF XF
18 G Z
10 G W
36 GF Y
1. Phosphor
material
bronze
contact
2
7
All models - Phosphor bronze
contact material
3. Contact spacing
5. Dual or single row
**C*D = 0.100" C-C x
row spacing
**A*D = 0.125" C-C x
row spacing
**M*DRX and RU =
0.156" C-C x
row spacing
**M*S = 0.156" C-C
readout
**M*DRT and RY =
0.156" C-C x
row spacing
0.200"
0.250"
0.200"
single
EB4 = 0.100" C-C x 0.200" row
spacing
EB6 = 0.125" C-C x 0.250" row
spacing
EB8 = 0.156" C-C x 200" row
spacing
EB7S = 0.156" C-C single
readout
EB7D = 0.156" C-C x 140" row
spacing
0.140"
2.Plating options:
S
= 10 µ" Gold
GF = 10 µ" Gold over Nickel
M
= 30 µ" Gold
G
Z
= 10 µ" Gold on contact
area only.
SGF = 10 µ" Gold on contact
area with Gold flash
on terminals all over
Nickel
= 30 µ" Gold over Nickel
4. Number of contact positions:
E*C*D = 10, 12, 15, 18, 20, 22,
25, 28, 30, 31, 35, 36,
40, 43, 44, 49, 50,
55, 60, 61, 65, and 70
EB4 = 10, 12, 15, 18, 20, 22,
25, 28, 30, 31, 35, 36,
40, 43, 44, 48, 49, 50,
and 60
E*A*D = 6, 10, 14, 15, 18, 22,
28, 30, 31, 32, 35, 36,
40, 44, 49, and 50
EB6 = 6, 10, 14, 15,
24, 25, 28, 30,
35, 36, 40, 43,
and 50
EB8 = 6, 10, 12, 15,
24, and 25
E*M*DRX and RU =
6, 8, 10, 12, 15, 18, 20,
22, 25, 28, 30, 31, 36,
40 and 43
18, 22,
31, 32,
44, 49,
18, 22,
E*M*S = 6, 8, 10, 12, 15, 18, 20,
22, 25, 28, 30, 31, 36,
40 and 43
EB7S = 6, 10, 12, 15, 18, and
22,
E*M*DRT and RY =
6, 8, 10, 12, 15, 18, 20,
22, 25, 28, 30, 31, 36,
40, and 43
EB7D = 6, 10, 12, 15, 18, 22,
36, and 43
VISHAY DALE
1
2
3
4
5
6
7
1. 3, 5
6
4
E
E
E
E
E
S
S
M
M
S
C
A
M
M
M
22
40
18
10
36
D
D
D
S
D
RM
RS
RX
SU
RY
H
D
F
N
1
EB4 3 EB6 3 EB8 3 EB7 3S EB7 3D -
K
C
C
B
B
22 GF X
40 GF XF
18 G Z
10 G W
36 GF Y
2
7
6.Terminal style:
E*C*D and E*A*D
RM = 0.025" sq. x 0.560"
long
RS = 0.025" sq. x 0.190"
long
EB4 and EB8
K = 0.025" sq. x 0.570"
long
C = 0.025" sq. x 0.175"
long
E*M*D
RX = 0.137" long dip solder
RU = 0.225" long dip solder
RE = solder eyelet
EB8
C =
K =
A =
0.125" long dip solder
0.200" long dip solder
Solder eyelet
E*M*S
SU = 0.210" long dip solder
RE = Solder eyelet
EB7S
B =
A =
0.220" long dip solder
Solder eyelet
E*M*D
RT = 0.137" long dip solder
RY = 0.381" long dip solder
RE = Solder eyelet
EB7D
C =
B =
A =
0.125" long dip solder
0.375" long dip solder
Solder eyelet
7. Mounting style:
E*C*D and E*A*D
H = 0.125" Dia .clearance
hole
I = 4 to 40 threaded insert
N = No mounting ears
D = Floating bushing
E*M*D and E*M*S
H = 0.125" Dia .clearance
hole
I = 4 to 40 threaded insert
N = No mounting ears
F = Floating bushing
EB4 and EB6
X = 0.125" Dia. clearance
hole
Y = 4 to 40 threaded insert
W = No mounting ears
XF = 0.125" Dia. clearance
hole
with
flush
mounting
EB8, EB7D and EB7S
X = 0.128" Dia. clearance
hole
Y = 4 to 40 threaded insert
W = No mounting ears
Z = Floating bushing
Notes
• This cross reference guide is designed to cross the competitor model number to the Vishay Dale model number. Each model number is
segmented in order to give a comparable explanation of what each part of the model number means.
• See the explanation listed below the perspective models.
www.vishay.com
34
For technical questions, contact: [email protected]
Document Number: 36000
Revision: 16-Feb-09
Competitor Products Cross Reference
Edgeboard Connectors
CINCH
1. Product series:
VISHAY DALE
2
CINCH
1
1
4
5
3
EB4
EB4
EB8
EB8
EB7
EB7
3 1 3 1 3S 1D -
K 25 SGF XF
D 22 SGF W
BE 18 GF X
A
6 SGF X
B 10 SGF X
C 15 SGF W
EB4 = 0.100" C-C x 0.200" row
spacing .
3 = Glass-filled polyester
3. Mounting style:
Vishay Dale
VISHAY DALE
1
1
4
EB4
EB4
EB8
EB8
EB7
EB7
3 1 3 1 3S 1D -
K 25 SGF XF
D 22 SGF W
BE 18 GF X
A
6 SGF X
B 10 SGF X
C 15 SGF W
EB4
XF =
YF =
EB4 = 0.100" C-C x 0.200" row
spacing.
1 = Diallyl phthalate
X =
W =
EB8
X =
EB8 = 0.156" C-C x 0.200" row
spacing
3 = Glass-filled polyester
Y =
EB7
X =
EB8 = 0.156" C-C x 0.200" row
spacing
1 = Diallyl phthalate
W =
EB7*S = 0.156" C-C Single
readout
3 = Glass-filled polyester
3
0.125" dia. clearance
hole with flush mounting
4 to 40 threated insert
with flush mounting
0.125" dia. clearance
hole with offset mounting
No mounting ears
0.125" dia. clearance
hole with offset mounting
No mounting ears
0.125" dia. clearance
hole with offset mounting
No mounting ears
EB4
C = 0.025" sq. x 0.175" long
dip solder
D = 0.025" sq. x 0.115" long
dip solder
K = 0.025" sq. x 0.570" long
dip solder wire wrap
EB7
C = 0.025" sq. x 0.175" long
dip solder
B = 0.375" long dip solder
A = Solder eyelet
EB8
K = 0.200" long dip solder
A = Solder eyelet
BE = 0.375" long dip solder,
card extender
L = 0.156" long dip solder
5.Plating options:
SGF = 10 µ" Gold over Nickel in
contact area with Gold
flash on terminal
EB43 = 12, 15, 18 ,20, 22, 25,
28, 30, 31, 36, 40, 43,
44, 49, 50, and 60
EB41 = 15, 22, 36, 40, 43, and
50
EB83 = 6, 10, 12, 15, 18, 22, 24,
and 25
EB81 = 6, 12, 15, 18, 20, 22,
and 25
5
4.Terminal style:
EB7*D = 0.156" C-C x 0.140"
row
spacing
1 = Diallyl phthalate
2. Number of contact
positions:
2
EB7*S = 6, 10, 12, 15, 18, and
22
GF = 30 µ" Gold over Nickel
EB7*D = 6, 10, 12, 15, 18, and
22
Notes
• This cross reference guide is designed to cross the competitor model number to the Vishay Dale model number. Each model number is
segmented in order to give a comparable explanation of what each part of the model number means.
• See the explanation listed below the perspective models.
Document Number: 36000
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
35
Competitor Products Cross Reference
Vishay Dale
Edgeboard Connectors
CINCH/VISHAY DALE PART NUMBER X-REF
CINCH/VISHAY DALE PART NUMBER X-REF
CINCH
VISHAY DALE
50-12SN-11
EB43-C12SGFXF
50-15SN-11
EB43-C15SGFXF
50-18SN-11
EB43-C18SGFXF
50-20SN-11
EB43-C20SGFXF
50-22SN-11
EB43-C22SGFXF
50-25SN-11
EB43-C25SGFXF
50-28SN-11
EB43-C28SGFXF
50-30SN-11
EB43-C30SGFXF
50-31SN-11
EB43-C31SGFXF
50-36SN-11
EB43-C36SGFXF
50-40SN-11
EB43-C40SGFXF
50-43SN-11
EB43-C43SGFXF
50-44SN-11
EB43-C44SGFXF
50-49SN-11
EB43-C49SGFXF
50-50SN-11
EB43-C50SGFXF
50-60SN-11
EB43-C60SGFXF
Contact material: Spring brass
Phosphor bronze
Terminal plating: Tin
Gold
Terminal dimension: 0.031 x 0.010, 0.025 Square
50-12SN-12
EB43-C12SGFW
50-15SN-12
EB43-C15SGFW
50-18SN-12
EB43-C18SGFW
50-20SN-12
EB43-C20SGFW
50-22SN-12
EB43-C22SGFW
50-25SN-12
EB43-C25SGFW
50-28SN-12
EB43-C28SGFW
50-30SN-12
EB43-C30SGFW
50-31SN-12
EB43-C31SGFW
50-36SN-12
EB43-C36SGFW
50-40SN-12
EB43-C40SGFW
50-43SN-12
EB43-C43SGFW
50-44SN-12
EB43-C44SGFW
50-49SN-12
EB43-C49SGFW
50-50SN-12
EB43-C50SGFW
50-60SN-12
EB43-C60SGFW
50-12SN-13
EB43-C12SGFYF
50-15SN-13
EB43-C15SGFYF
50-18SN-13
EB43-C18SGFYF
50-20SN-13
EB43-C20SGFYF
50-22SN-13
EB43-C22SGFYF
50-25SN-13
EB43-C25SGFYF
50-28SN-13
EB43-C28SGFYF
50-30SN-13
EB43-C30SGFYF
50-31SN-13
EB43-C31SGFYF
50-36SN-13
EB43-C36SGFYF
50-40SN-13
EB43-C40SGFYF
50-43SN-13
EB43-C43SGFYF
50-44SN-13
EB43-C44SGFYF
50-49SN-13
EB43-C49SGFYF
50-50SN-13
EB43-C50SGFYF
50-60SN-13
EB43-C60SGFYF
50-30C-20-1
EB41-D15SGFW
50-44C-20-1
EB41-D22SGFW
50-72C-20-1
EB41-D36SGFW
50-80C-20-1
EB41-D40SGFW
50-86C-20-1
EB41-D43SGFW
50-100C-20-1
EB41-D50SGFW
50-30C-30-1
EB41-K15SGFX
CINCH
50-44C-30-1
50-72C-30-1
50-80C-30-1
50-86C-30-1
50-100C-30-1
Contact material:
Alloy 688
Brass
50-12SN-1
50-20SN-1
50-24SN-1
50-30SN-1
50-36SN-1
50-44SN-1
50-48SN-1
50-50SN-1
50-12SN-3
50-20SN-3
50-24SN-3
50-30SN-3
50-36SN-3
50-44SN-3
50-48SN-3
50-50SN-3
Contact material: Spring brass
Terminal plating: Tin
Terminal length: 0.156
50-12SN-2
50-20SN-2
50-24SN-2
50-30SN-2
50-36SN-2
50-44SN-2
50-12SN-4
50-20SN-4
50-24SN-4
50-30SN-4
50-36SN-4
50-44SN-4
Contact material: Spring brass
Terminal plating: Tin
Card insertion depth: 0.333
50-6SN-5
50-10SN-5
50-12SN-5
50-15SN-5
50-18SN-5
50-22SN-5
50-6SN-6
50-10SN-6
50-12SN-6
50-15SN-6
50-18SN-6
50-22SN-6
Contact material: Spring brass
Terminal plating: Tin
Terminal length: 0.156
Card insertion depth: 0.333
VISHAY DALE
EB41-K22SGFX
EB41-K36SGFX
EB41-K40SGFX
EB41-K43SGFX
EB41-K50SGFX
Phosphor bronze
EB83-K6SGFX
EB83-K10SGFX
EB83-K12SGFX
EB83-K15SGFX
EB83-K18SGFX
EB83-K22SGFX
EB83-K24SGFX
EB83-K25SGFX
EB83-K6SGFW
EB83-K10SGFW
EB83-K12SGFW
EB83-K15SGFW
EB83-K18SGFW
EB83-K22SGFW
EB83-K24SGFW
EB83-K25SGFW
Phosphor bronze
Gold
0.200
EB73D-C6SGFX
EB73D-C10SGFX
EB73D-C12SGFX
EB73D-C15SGFX
EB73D-C18SGFX
EB73D-C22SGFX
EB73D-C6SGFW
EB73D-C10SGFW
EB73D-C12SGFW
EB73D-C15SGFW
EB73D-C18SGFW
EB73D-C22SGFW
Phosphor bronze
Gold
0.260
EB73S-B6SGFX
EB73S-B10SGFX
EB73S-B12SGFX
EB73S-B15SGFX
EB73S-B18SGFX
EB73S-B22SGFX
EB73S-B6SGFW
EB73S-B10SGFW
EB73S-B12SGFW
EB73S-B15SGFW
EB73S-B18SGFW
EB73S-B22SGFW
Phosphor bronze
Gold
0.220
0.300
Notes
• This cross reference guide is designed to cross the competitor model number to the Vishay Dale model number. Each model number is
segmented in order to give a comparable explanation of what each part of the model number means.
• See the explanation listed below the perspective models.
www.vishay.com
36
For technical questions, contact: [email protected]
Document Number: 36000
Revision: 16-Feb-09
Competitor Products Cross Reference
Edgeboard Connectors
Vishay Dale
CINCH/VISHAY DALE PART NUMBER X-REF
CINCH/VISHAY DALE PART NUMBER X-REF
CINCH
50-6SN-7
50-10SN-7
50-12SN-7
50-15SN-7
50-18SN-7
50-22SN-7
50-6SN-8
50-10SN-8
50-12SN-8
50-15SN-8
50-18SN-8
50-22SN-8
Contact material: Spring brass
Terminal plating: Tin
Card insertion depth: 0.333
50-12SN-9
50-20SN-9
50-24SN-9
50-30SN-9
50-36SN-9
50-44SN-9
50-48SN-9
50-50SN-9
50-12SN-10
50-20SN-10
50-24SN-10
50-30SN-10
50-36SN-10
50-44SN-10
50-48SN-10
50-50SN-10
Contact material: Spring brass
Terminal plating: Tin
50-12S-30-1
50-20S-30-1
50-24S-30-1
50-30S-30-1
50-36S-30-1
50-44S-30-1
50-12S-30-2
50-20S-30-2
50-24S-30-2
50-30S-30-2
50-36S-30-2
50-44S-30-2
Contact material: Spring brass
Terminal plating: Tin
Card insertion depth: 0.333
50-12A-30
50-20A-30
50-24A-30
50-30A-30
50-36A-30
50-44A-30
50-50A-30
Contact material: Spring brass
CINCH
50-12A-10
50-10A-10
50-24A-10
50-30A-10
50-36A-10
50-44A-10
50-50A-10
Contact material: Spring brass
Terminal length: 0.156
50-6A-20
50-10A-20
50-12A-20
50-15A-20
50-18A-20
50-22A-20
Contact material: Spring
Card insertion depth: 0.333
50-6B-10
50-10B-10
50-12B-10
50-15B-10
50-18B-10
50-22B-10
Contact material: Spring
Card insertion depth: 0.333
Terminal length: 0.156
50-12S-30
50-20S-30
50-24S-30
50-30S-30
50-36S-30
50-44S-30
50-50S-30
50-12H-30-1
50-20H-30-1
50-24H-30-1
50-30H-30-1
50-36H-30-1
50-44H-30-1
50-12H-30-2
50-20H-30-2
50-24H-30-2
50-30H-30-2
50-36H-30-2
50-44H-30-2
Card insertion depth: 0.333
50-12S-20
50-20S-20
50-24S-20
50-30S-20
50-36S-20
50-44S-20
50-50S-20
Terminal length: 0.234
VISHAY DALE
EB73S-A6SGFX
EB73S-A10SGFX
EB73S-A12SGFX
EB73S-A15SGFX
EB73S-A18SGFX
EB73S-A22SGFX
EB73S-A6SGFW
EB73S-A10SGFW
EB73S-A12SGFW
EB73S-A15SGFW
EB73S-A18SGFW
EB73S-A22SGFW
Phosphor bronze
Gold
0.300
EB83-A6SGFX
EB83-A10SGFX
EB83-A12SGFX
EB83-A15SGFX
EB83-A18SGFX
EB83-A22SGFX
EB83-A24SGFX
EB83-A25SGFX
EB83-A6SGFW
EB83-A10SGFW
EB83-A12SGFW
EB83-A15SGFW
EB83-A18SGFW
EB83-A22SGFW
EB83-A24SGFW
EB83-A25SGFW
Phosphor bronze
Gold
EB73D-C6SGFW
EB73D-C10SGFW
EB73D-C12SGFW
EB73D-C15SGFW
EB73D-C18SGFW
EB73D-C22SGFW
EB73D-C6SGFX
EB73D-C10SGFX
EB73D-C12SGFX
EB73D-C15SGFX
EB73D-C18SGFX
EB73D-C22SGFX
Phosphor bronze
Gold
0.260
EB83-A6SGFX
EB83-A10SGFX
EB83-A12SGFX
EB83-A15SGFX
EB83-A18SGFX
EB83-A22SGFX
EB83-A25SGFX
Phosphor bronze
VISHAY DALE
EB83-K6SGFX
EB83-K10SGFX
EB83-K12SGFX
EB83-K15SGFX
EB83-K18SGFX
EB83-K22SGFX
EB83-K25SGFX
Phosphor bronze
0.200
EB73S-A6SGFX
EB73S-A10SGFX
EB73S-A12SGFX
EB73S-A15SGFX
EB73S-A18SGFX
EB73S-A22SGFX
Phosphor bronze
0.300
EB73S-B6SGFX
EB73S-B10SGFX
EB73S-B12SGFX
EB73S-B15SGFX
EB73S-B18SGFX
EB73S-B22SGFX
Phosphor bronze
0.300
0.220
EB83-BE6GFX
EB83-BE10GFX
EB83-BE12GFX
EB83-BE15GFX
EB83-BE18GFX
EB83-BE22GFX
EB83-BE25GFX
EB71D-C6SGFW
EB71D-C10SGFW
EB71D-C12SGFW
EB71D-C15SGFW
EB71D-C18SGFW
EB71D-C22SGFW
EB71D-C6SGFX
EB71D-C10SGFX
EB71D-C12SGFX
EB71D-C15SGFX
EB71D-C18SGFX
EB71D-C22SGFX
0.260
EB81-K6SGFX
EB81-K10SGFX
EB81-K12SGFX
EB81-K15SGFX
EB81-K18SGFX
EB81-K22SGFX
EB81-K25SGFX
0.200
Notes
• This cross reference guide is designed to cross the competitor model number to the Vishay Dale model number. Each model number is
segmented in order to give a comparable explanation of what each part of the model number means.
• See the explanation listed below the perspective models.
Document Number: 36000
Revision: 16-Feb-09
For technical questions, contact: [email protected]
www.vishay.com
37
Competitor Products Cross Reference
Vishay Dale
Edgeboard Connectors
CINCH/VISHAY DALE PART NUMBER X-REF
CINCH/VISHAY DALE PART NUMBER X-REF
CINCH
50-12H-10
50-20H-10
50-24H-10
50-30H-10
50-36H-10
50-44H-10
50-50H-10
50-6H-20
50-10H-20
50-12H-20
50-15H-20
50-18H-20
50-22H-20
Card insertion depth: 0.333
50-12H-30
50-20H-30
50-24H-30
50-30H-30
50-36H-30
CINCH
50-44SH-30
50-50SH-30
50-6H-10
50-10H-10
50-12H-10
50-15H-10
50-18H-10
50-22H-10
Card insertion depth: 0.333
Terminal length: 0.156
50-6S-10
50-10S-10
50-12S-10
50-15S-10
50-18S-10
50-22S-10
Card insertion depth: 0.333
Terminal length: 0.234
VISHAY DALE
EB81-L6SGFX
EB81-L10SGFX
EB81-L12SGFX
EB81-L15SGFX
EB81-L18SGFX
EB81-L22SGFX
EB81-L25SGFX
EB71S-A6SGFX
EB71S-A10SGFX
EB71S-A12SGFX
EB71S-A15SGFX
EB71S-A18SGFX
EB71S-A22SGFX
0.300
EB81-A6SGFX
EB81-A10SGFX
EB81-A12SGFX
EB81-A15SGFX
EB81-A18SGFX
VISHAY DALE
EB81-A22SGFX
EB81-A25SGFX
EB71S-B6SGFX
EB71S-B10SGFX
EB71S-B12SGFX
EB71S-B15SGFX
EB71S-B18SGFX
EB71S-B22SGFX
0.300
0.220
EB71S-B6SGFX
EB71S-B10SGFX
EB71S-B12SGFX
EB71S-B15SGFX
EB71S-B18SGFX
EB71S-B22SGFX
0.300
0.220
Notes
• This cross reference guide is designed to cross the competitor model number to the Vishay Dale model number. Each model number is
segmented in order to give a comparable explanation of what each part of the model number means.
• See the explanation listed below the perspective models.
www.vishay.com
38
For technical questions, contact: [email protected]
Document Number: 36000
Revision: 16-Feb-09
Build Vishay
into your Design
worldwide sales contacts
Visit www.vishay.com for product information or select below
for a current list of sales offices, representatives and distributors.
The Americas
EUROPE
United States
Germany
Vishay Americas
One Greenwich Place
Shelton, CT 06484
United States
Ph: +1-402-563-6866
Fax: +1-402-563-6296
Vishay Electronic GmbH
Geheimrat-Rosenthal-Str. 100
95100 Selb
Germany
Ph: +49-9287-71-0
Fax: +49-9287-70435
Asia
France
Singapore
Vishay S.A.
199, BLVD DE LA MADELEINE
06003 NICE, CEDEX 1
France
Ph: +33-4-9337-2920
Fax: +33-4-9337-2997
Vishay intertechnology
Asia Pte Ltd.
25 Tampines Street 92
Keppel Building #02-00
Singapore 528877
Ph: +65-6788-6668
Fax: +65-6788-0988
P.R. China
Vishay Trading (Shanghai) Co., Ltd.
15D, SUN TONG INFOPORT PLAZA
55 HUAI HAI WEST ROAD
SHANGHAI 200030
P.R. China
PH: +86-21-5258-5000
FAX: +86-21-5258-7979
UNITED KINGDOM
VISHAY LTD.
Suite 6C, Tower House
St. Catherine’s Court
Sunderland Enterprise Park
Sunderland SR5 3XJ
united kingdom
Ph: +44-191-516-8584
Fax: +44-191-549-9556
Japan
vishay japan CO., LTD.
MG Ikenohata Bldg. 4F
1-2-18, Ikenohata
Taito-ku
Tokyo 110-0008
Japan
Ph: +81-3-5832-6210
fax: +81-3-5832-6260
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
EDGEBOARD CONNECTORS
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
D ata B ook
World Headquarters
Vishay Intertechnology, Inc.
63 Lancaster Avenue
Malvern, PA 19355-2143
United States
© Copyright 2009 Vishay Intertechnology, Inc.
® Registered trademarks of Vishay Intertechnology, Inc.
All rights reserved. Printed in Germany.
Specifications subject to change without notice.
w w w. v i s h a y. c o m
VSE-DB0034-0907