VISHAY EB71SA18SGFXA

EB7S
Vishay Dale
Edgeboard Connectors, Single Readout
FEATURES
ELECTRICAL SPECIFICATIONS
Current Rating: 5 amps.
Test Voltage Between Contacts:
At sea level: 1800VRMS.
At 70,000 feet [21,336 meters]: 450VRMS.
Insulation Resistance: 5000 Megohm minimum at 500VDC
potential.
Contact Resistance: 30 millivolts maximum at rated current
(with gold plating).
Operating Temperature: - 55°C to + 125°C.
Humidity: 96 hours at 90% relative humidity at + 40°C, dried
at room temperature for 3 hours minimum, insulation
resistance 5000 Megohm.
Durability: (With gold plating.) After 500 cycles of insertion
and withdrawal of 0.070" [1.78mm] thick steel test gauge,
contact resistance less than 0.030V at 5 amps and individual
contact retention force when measured with a 0.054" [1.37mm]
thick steel test slug greater than 1/2 ounce.
Shock: Three 50g shocks in each of 3 mutually perpendicular
planes with no loss of continuity.
Vibration: 2 hours in each of 3 mutually perpendicular
planes, frequency sweep 10 to 55cps at 0.06 double amplitude
with no loss of continuity.
PHYSICAL SPECIFICATIONS
Contact Type: Bifurcated bellows.
Number of Contacts: 6, 10, 12, 15, 18 and 22 per side.
Contact Spacing: 0.156" [3.96mm] center to center.
Card Thickness: 0.054" to 0.071" [1.37mm to 1.80mm].
Card Slot Depth: Single Readout = 0.300" [7.62mm].
• 0.156" [3.96mm] C-C.
• Bifurcated bellows contacts provide 2 flexing contact surfaces
to assure positive contact under adverse conditions such as
vibration or PC board irregularities.
• Accepts PC board thickness of 0.054" - 0.071"
[1.37mm - 1.80mm].
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without loss
of a contact position.
• Selective gold plating.
• Polarizing key is reinforced nylon, may be inserted by hand,
requires no adhesive.
• Protected entry, provided by recessed leading edge of
contact, permits the card slot to straighten and align the board
before electrical contact is made. Prevents damage to
contact which might be caused by warped or out of tolerance
boards.
• Recognized under the Component Program of
Underwriters Laboratories, Inc. Listed under File E65524,
Project 77CH3889.
APPLICATIONS
For use with 0.062" [1.57mm] printed circuit boards requiring
an edgeboard type connector on 0.156" [3.96mm] centers.
MATERIAL SPECIFICATIONS
Body: (Standard) Glass-filled phenolic per MIL-M-14, dark
green, flame retardant (UL 94V-0).
(Optional - See Ordering Information):
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F
green, flame retardant (UL 94V-0).
“3” thermoplastic polyester, glass-filled, black, flame retardant
(UL 94V-0).
Contacts: Phosphor bronze.
Polarizing Key: Glass reinforced nylon, flame retardant
(UL94H-B).
Contact Plating: Gold (See Ordering Information).
NOTE: High temperature burn-in, edgeboard connectors,
0.156" [3.96mm] center to center are on page 20 of this catalog.
ORDERING INFORMATION
EB7
MODEL
1
BODY MATERIAL
Optional Body
Material
1 = Diallyl
Phthalate
3 = Glass-filled
Polyester
Omit for
standard
phenolic.
Document Number 36004
Revision 14-Aug-02
S
SINGLE
READOUT
A
22
STANDARD TERMINAL CONTACTS
VARIATIONS
A or B
6, 10,
12,
15, 18
or 22
SG
CONTACT
PLATING
X
A
MOUNTING POLARIZING
VARIATIONS
KEY
POSITIONS
SG = Selective Gold Plating
(0.00003"
[0.000762mm]
Key(s) are
minimum thick) on contact area
located to
with Gold Flash on terminal.
right
of
SGF = Selective Gold Plating
position(s)
(0.00001"
[0.000254mm]
designated.
minimum thick) on contact area
Required
with Gold Flash on terminal.
only when
All Gold Plating over 0.00005"
polarizing
[0.00127mm] minimum Nickel
keys are to
Underplate.
be factory
Contact factory for additional
installed.
plating options.
For technical questions, contact [email protected]
www.vishay.com
11
EB7S
Vishay Dale
Edgeboard Connectors, Single Readout
DIMENSIONS in inches [millimeters]
Section C-C
0.062 ± 0.010
[1.57 ± 0.254]
R Typ.
Type “A”
0.030 [0.762]
0.054 - 0.071
[1.37 - 1.80]
A
0.300 [7.62]
Depth of
Card
Insertion
B
D
E
C
C
0.156 ± 0.005
[3.96 ± 0.127]
Non-Cumulative
See Table
for Mounting
Variations
0.250
[6.35]
See Table
for Contact
Variations
0.328 ± 0.010
[8.33 ± 0.254]
0.440
[11.18]
# OF CONTACT
POSITIONS
0.016 [.410]
A
B
D
E
6
1.78 [45.21]
1.531 [38.89]
1.218 [30.94]
1.100 [27.94]
10
2.41 [61.21]
2.156 [54.76]
1.843 [46.81]
1.724 [43.79]
12
2.72 [69.09]
2.468 [62.69]
2.156 [54.76]
2.036 [51.71]
15
3.19 [81.03]
2.937 [74.60]
2.624 [66.65]
2.504 [63.60]
18
3.66 [92.96]
3.406 [86.51]
3.093 [78.56]
2.972 [75.49]
22
4.28 [108.71]
4.031 [102.39]
3.717 [94.41]
3.596 [91.34]
TERMINAL VARIATIONS in inches [millimeters]
POLARIZING KEY
Type “A”
Pierced
0.028
[.711]
0.230
[5.84]
0.245
[6.22]
Type “B”
Solder Dip
To fit
0.051 [1.30]
Dia. Eyelet
To fit 3,
#22 AWG
Wires
0.086
[2.18]
When ordering polarizing keys
individually, specify Model
Number: PK-7 between contacts.
Hand insertion tool, TPK-7, provided
on request.
www.vishay.com
12
0.220 ± 0.015
[5.59 ± 0.381]
For technical questions, contact [email protected]
0.220 ± 0.015
[5.59 ± 0.381]
Document Number 36004
Revision 14-Aug-02
EB7S
Edgeboard Connectors, Single Readout
Vishay Dale
MOUNTING VARIATIONS in inches [miilimeters]
Type “V”
Clearance Hole
0.250 [6.35]
Ref.
0.142 [3.61] Dia.
Type “XI”
Clearance Hole
No Mounting Pad
Type “VI”
Clearance Hole
No Mounting Pad
0.220 [5.59]
Ref.
Document Number 36004
Revision 14-Aug-02
Type “X”
Clearance Hole
0.250 [6.35]
Ref.
0.250 [6.35]
Ref.
0.010 [.254]
0.000 [.000]
0.142
[3.61]
Dia.
0.220 [5.59]
Ref.
0.128 [3.25] Dia.
Type “Y”
Threaded Insert
Type “Z”
Floating Bushing Radial Float .047 [1.19]
0.250 [6.35]
Ref.
0.250 [6.35]
Ref.
0.250 [6.35]
Ref.
0.128
[3.25]
Dia.
Type “W”
No Mounting Flange
4-40
UNC-2B
0.218 [5.54]
Ref.
0.116
[2.95]
Dia.
NOTE: Overall body length
increased by .060 [1.52].
0.250 [6.35] Dia.
0.270 [6.86]
For technical questions, contact [email protected]
www.vishay.com
13
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1