Switchcraft, Inc. 5555 North Elston Avenue Chicago, IL 60630 Tel 773.792.2700 Fax 773.792.3075 www.switchcraft.com CERTIFICATE OF COMPLIANCE – RoHS2 General Compliance Statement This statement confirms that Switchcraft is aware of the requirements of EU Directive 2011/65/EU (RoHS2) and intends to comply with the requirement in regards to material content for products identified as RoHS compliant. Many legacy products and customer specific products continue to be offered, and in the original configuration will not be RoHS compliant. In most cases RoHS compliant versions of the legacy products are available and are identified by adding an”X” suffix to the part number. Customer specific products are converted and re-identified as requested. The plastic resins, base metals, metal plating or coatings used to manufacture RoHS compliant Switchcraft products do not have any intentionally added: • Hexavalent Chromium (0.1%) • Poly-brominated biphenyls (PBBs) (0.1%) • Poly-brominated diphenyl ethers (PBDEs), including Deca-BDE (0.1%) • Cadmium (0.01%) • Mercury (0.1%) • Lead * (0.1%) *Per EU Directive 2011/65/EU (RoHS 2), Exemption 6c, copper alloys may contain up to 4% Lead. **Per EU Directive 2011/65/EU (RoHS 2), Exemption 8b, electrical contacts may contain Cadmium or its compounds. Specific product RoHS2 Certificates of Compliance are available on request. We reserve the right to make material substitutions in our product that will not impact this certification. None of our materials were analyzed for content, relying on the material supplier for Certifications and available MSDS. The signature below certifies that the statements above, including but not limited to any material composition data, are valid and accurate. Signature: ___ ____ Date: _08 January 2016__ Name: Brian Smeenge Phone: _773-792-2700 X375_ Title: Director of Engineering email: [email protected]