Errata: CS4265 Rev. C0 Silicon Reference CS4265_DS657F1 Data Sheet The quiescent voltage present on VQ is typically (0.45 x VA) VDC. The MUTEC output pin drives high when the device is in reset. When the device is released from reset, the MUTEC pin will remain high until the device is taken out of power-down mode and a mute condition is met. Contacting Cirrus Logic Support For all product questions and inquiries, contact a Cirrus Logic Sales Representative. To find the one nearest you, go to http://www.cirrus.com http://www.cirrus.com Copyright © Cirrus Logic, Inc. 2006 (All Rights Reserved) DECEMBER '06 ER657F1