SKS 1910N B6U 1280 V16 Electrical Characteristics Symbol Conditions min Electrical Data TAMBIENT = 45°C ; No overload ID Maximum DC current VAC Maximum AC voltage (+/-10%) VBUS DC Bus voltage PTOTAL Maximum stack power Stack power loss (TAMBIENT = 45°C) PLOSS Environnmental Data Symbol Diode Presspack stack Conditions typ max 1 910 500 670 1 280 min Mechanical Data SEMIKRON document number.revision.version Drawing Approximate total weight Weight Installation altitude without derating Altitude IEC 60529 Protection Pollution degree EN 50178 typ Unit A VAC VDC kW W max 12062002.00 111.1 1 000 IP00 2 Unit kg m - SEMISTACK® CLASSICS - B6U Three phase uncontrolled rectifier Stack Protection Symbol Preliminary Data RC Circuit Ordering No. Description 08785106 SKS 1910N B6U 1280 V16 Type R C Conditions RC in parallel with bridge rectifier Resistance (80W) min typ 33 0.47 max Unit Ohm µF Features • Non-isolated power stacks • SKN 2000/16 • Heatsink U3/515 • Natural cooling • RC circuit included Typical Applications • Power supplies • Rectifier for AC/DC motor control Remarks This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee, expressed or implied, is made regarding delivery, performance or suitability. B6U © by SEMIKRON Rev. 1 - 06.08.2015 1 SKS 1910N B6U 1280 V16 Dimensions This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev. 1 - 06.08.2015 2