SKS 430F B6U 290 V16 SU Electrical Characteristics Symbol Conditions min Electrical Data ID Maximum DC current Tamb = 35°C ; No overload Maximum AC Voltage (+/-10%) VAC VBUS DC Bus voltage Maximum stack power PTOTAL Stack power loss (TAMBIENT = 35°C) PLOSS Environnmental Data Symbol Diode Presspack stack Fan Data Three phase uncontrolled rectifier Type VFAN fFAN IFAN PFAN Ordering No. Description 08785123 SKS 430F B6U 290 V16 SU min Stack protection Symbol • Isolated power stacks • SKKD 162/16 • Heatsink P16/200 SPack2 • Forced Air cooling • RC circuit included • Fuses with microswitches • Thermal trip included RC circuit Type R C VDC kW W typ max 13,0 1 000 IP00 2 RC in parallel with bridge rectifier Resistance (11W) typ kg m - VAC 230 50/60 0.60/0.68 135/154 min Unit - SKF 16A-230-11 Conditions Unit A VAC 11091206.00.B SEMIKRON fan designation Fan voltage Fan frequency Fan maximum input current Fan power Features max 430 500 670 290 Mechanical Data SEMIKRON document number.revision.version Drawing Approximative total weight Weight Installation altitude without derating Altitude IEC 60529 Protection Pollution degree EN 50178 SEMISTACK® CLASSICS - B6U Preliminary data Conditions typ Hz A W max Unit 1/6 RC47 47 0.22 Ohm µF 30 400 A V kA²s Fuses Size IN RMS UN Typical Applications I²t • Power supplies • Rectifier for AC/DC motor Control 1 fuse per phase, with microswitches Caliber Nominal Voltage (IEC) Total at Un at room temperature (approx. 20…25°C ) Bimetal thermal trip Switching temperature over which thermal trip is open TS ITC MAX Maximum permissible current at 240VAC at 30VDC 690 126 75 1 3 °C A A Remarks This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee, expressed or implied is made regarding delivery, performance or suitability. B6U © by SEMIKRON Rev. 0 - 06.08.2015 1 SKS 430F B6U 290 V16 SU Dimensions This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev. 0 - 06.08.2015 2