SKS 1500F B6C 1010 V16 SU Electrical Characteristics Symbol Conditions min Electrical Data TAMBIENT = 35°C ; No overload ID Maximum DC current Maximum AC voltage (+/-10%) VAC VBUS DC Bus voltage Maximum stack power PTOTAL Stack power loss (TAMBIENT = 35°C) PLOSS Environnmental Data Symbol Thyristor Presspack stack Fan Data Three phase controlled rectifier Type VFAN fFAN IFAN PFAN Ordering No. Description 08785005 SKS 1500F B6C 1010 V16 SU min Stack Protection Symbol • Non-isolated power stacks • SKT 1200/16 • Heatsink P17/130 • Forced air cooling • RC circuit included • Fuses with microswitches • Thermal trip included RC Circuit Type R C VDC kW W typ max 49 1 000 IP00 2 230 50/60 0.36/0.51 81/115 min RC in parallel with each electrical switch Resistance (80W) typ Unit kg m - SKF 17A-230-11 Conditions Unit A VAC 12100422.00.B SEMIKRON fan designation Fan voltage Fan frequency Fan maximum input current Fan power Features max 1 500 500 670 1 010 Mechanical Data SEMIKRON document number.revision.version Drawing Approximate total weight Weight Installation altitude without derating Altitude IEC 60529 Protection Pollution Degree EN 50178 SEMISTACK® CLASSICS - B6C Preliminary Data Conditions typ VAC Hz A W max Unit 33 0.47 Ohm µF 33 1 600 A V kA²s Fuses Size IN RMS UN Typical Applications I²t • Regulated power supplies • Alternator excitation • Motor control 1 fuse per phase, with microswitches Caliber Nominal voltage (IEC) Total at Un at room temperature (approx. 20…25°C) Bimetal Thermal Trip TS Switching temperature over which thermal trip is open ITC MAX Maximum permissible current at 240VAC at 30VDC 600 2 900 100 1 3 °C A A Remarks This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee, expressed or implied, is made regarding delivery, performance or suitability. B6C © by SEMIKRON Rev. 1 - 18.01.2013 1 SKS 1200F B6C 800 V16 SU Dimensions This technical information specifies semiconductor devices but promises no characteristics. No warranty or guarantee expressed or implied is made regarding delivery, performance or suitability. © by SEMIKRON Rev. 1 - 18.01.2013 2