May 2002 LM9628 Color CMOS Image Sensor VGA 30 FPS General Description Applications The LM9628 is a high performance, low power, 1/3” VGA CMOS Active Pixel Sensor capable of capturing color digital still or motion images and converting them to a digital data stream. f f f f f In addition to the active pixel array, an on-chip 12 bit A/D convertor, fixed pattern noise elimination circuits, a video gain and separate color gain amplifier are provided. Furthermore, an integrated programmable smart timing and control circuit allows the user maximum flexibility in adjusting integration time, active window size, gain and frame rate. Various control, timing and power modes are also provided. The excellent linear dynamic range of the sensor can be extended to above 100dB by programming a non linear response curve that matches the response of the human eye. Features f f f f f f f f f f Video or snapshot operations Programmable pixel clock, inter-frame and inter-line delays. Programmable partial or full frame integration Programmable gain and individual color gain adjustment Horizontal & vertical sub-sampling (2:1 & 4:2) Programmable digital video response curve Windowing External snapshot trigger & event synchronisation signals Auto black level compensation Flexible digital video read-out supporting programmable: - polarity for synchronisation and pixel clock signals - leading edge adjustment for horizontal synchronization f Programmable via 2 wire I 2 C compatible serial interface f Power on reset & power down mode Dual Mode Camera Digital Still Camera Security Cameras Machine Vision Automotive Key Specifications Array Format Total: 664H x 504V Active: 648H x 488 V Effective Image Area Total: 4.98 mm x 3.78 mm Active: 4.86 mm x 3.66 mm Optical Format 1/3“ Pixel Size 7.5µm x 7.5µm Video Outputs 8,10 & 12 Bit Digital Frame Rate 30 frames per second Dynamic Range 62dB in linear mode 110dB in non linear mode Electronic Shutter Rolling reset FPN 0.1% PRMU 1.5% Sensitivity 2.7 V/lux.s Quantum Efficiency 27% Fill Factor 47% Color Mosaic Bayer pattern Package 48 CLCC Single Supply 3.3 V +/-10% Power Consumption 120 mW Operating Temp -40 to 85 o C G mux 12 Bit A/D B oe Digital Video Framer AMP Black Level C ompensation APS Array R Bad Pixel Detect & Correct Row Address Decoder Horizontal Shift Register Column CDS Overall Chip Block Diagram d[11:0] pclk hsync vsync POR Reset Gen Row Address Gen Vertical Timing Horizontal Timing Gain Control Register Bank Clock Gen reset mclk Controller (sequencer) Master Timer extsync 2002 National Semiconductor Corporation snapshot Power Control I2C Compatible Serial I/F sda sclk sadr pdwn www.national.com LM9628 Color CMOS Image Sensor VGA 30 FPS ADVANCE INFORMATION Item Description Part Number LM9628 LM9628, 30 frames per second color CMOS image sensor. This sensor is shipped in a 48 pin ceramic leadless chip carrier package. Minimum order quantity, one tray of 96 units. LM9628IEA Sample Kit This kit includes 5 LM9628 samples and complete product datasheet. LM9628SAMPLE-KIT Headboard This is a small PCB that houses the LM9628 sensor together with all necessary discrete components. The headboard is supplied with C-MOUNT lens block (lens not included) and documentation. M12 Lens mounts (not included) can be mounted on this board. LM9628HEADBOARD The evaluation kit is a complete software/hardware solution designed to give the system designer a complete raw data evaluation toolset for the LM9628 sensor. Evaluation Kit LM9628EVAL-KIT The kit contains a LM9628 headboard (see above), C-MOUNT lens, capture and display board, power supply, SNAPS EVAL version Windows application software and documentation. 1/3” Lens Kit The 1/3” lens kit consists of four 1/3” M12 lenses and an M12 mount that can be attached to any LM9628 headboard (see above). All lenses in the kit have been tested by National Semiconductor and are supplied with documentation and test data. LM96XXLENS-KIT LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support @ nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support @ nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: [email protected] National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. LM9628 LM9628 Color CMOS Image Sensor VGA 30 FPS Ordering Information (Product, Samples & Design In Tools)