ay V I S H AY I N T E R T E C H N O L O G Y, I N C . Hybrid Storage Capacitors 196 HVC ENYCAP™ Hybrid Storage 196 HVC ENYCAP™ Capacitors KEY BENEFITS • • • • • • • • Polarized storage capacitor with high capacity and high energy density Alternative product to rechargeable backup batteries Soft and low transient-voltage-controlled charging characteristic Low profile (2.5 mm) to fit portable and compact designs Various layouts (flat, stacked, pins, tabs) Very long self-discharge time (months) Non-harzadous electrolyte RoHS-compliant APPLICATIONS • Power backup for memory controller, flash backup, RAID system, SRAM, DRAM • Power failure and write cache protection for enterprise SSD and HDD • Real-time clock power source • Burst power support for flashlights and wireless transmitters • Backup power for industrial PCs and industrial controls 196 HVC • Storage device for energy harvesting BCcomponents • Emergency light and micro UPS power source 196 HVC RESOURCES pacitors components • Datasheet: 196 HVC ENYCAP™ - http://www.vishay.com/doc?28409 • For technical questions contact [email protected] ors • Material categorization: For definitions of compliance please see storage capacitor http://www.vishay.com/doc?99912 argeable backup apacitor One of the World’s Largest Manufacturers of hole (STH), surface atbackup configurations (LFC) with , surface PRODUCT SHEET urations (LFC) with necessary Discrete Semiconductors and Passive Components 1/2 VMN-PT0394-1410 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC density DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 y 4.2 V, 5.6 V, 7.0 V, and 8.4 V FEATURES 196 HVC ENYCAP™ • Polarized energy storage capacitor with high capacity and energy density • Voltage flexibility: V (single V I S H1.4AY I N T Ecell) R T to E C2.8H VN /O L O G Y, I N C . 4.2 V / 5.6 V / 7.0 V / 8.4 V (multiple cells) • Available in stacked through-hole (STH, radial), surface-mount flat (SMF) and lay flat configurations (LFC) with wire and connectors • Useful life: 1000 h at 70 °C / 85 °C • No cell balancing necessary • Soft andFEATURES low transient-voltage-controlled charging characteristic • Polarized energy storage capacitor with high • Non-hazardous electrolyte capacity and energy density • Maintenance-free, service necessary • Voltagenoflexibility: 1.4 V (single cell) to 2.8 V / • Evaluation 4.2 kitsV for are Vavailable / 5.6engineering V / 7.0 V / 8.4 (multiple under cells) ordering code: MAL219699001E3 • Available in stacked through-hole (STH, radial), • Material categorization: for definitions of compliance surface-mount flat (SMF) and lay flat please see www.vishay.com/doc?99912 configurations (LFC) with wire and connectors www.vishay.com Vishay BCcomponents Storage Capacitors Hybrid EnergyHybrid Storage Aluminum Capacitors 196 ENYCAP™ 196HVC HVC ENYCAP™ www.vishay.com Vishay BCcomponents Hybrid Energy Capacitors Hybrid StorageStorage 196 HVCAluminum ENYCAP™ Capacitors FEATURES • Useful life: 1000 h at 70 °C / 85 °C APPLICATIONS Image is not to scale QUICK REFERENCE DATA DESCRIPTION SINGLE CELL 7 x 2.5 12 x 2.5 7 x 7 x 2.5 Nominal case size (Ø W x L x H in mm) 12 x 12 x 2.5 Surface-Mount Flat (SMF) Nominal case size (W x L x H in mm) 14.5 x 12 x 2.5 Lay Flat (LFC) Image is not to scale 4.0 F Rated capacitance range, CR 15.0 F Nominal case size (Ø D x L in mm) Stacked Through-Hole (STH) • •Polarized energy storagecontroller, capacitor with highRAID Power backup for flash backup, • No cellmemory balancing capacity energy density necessary systems,and SRAM, DRAM • Soft and low transient-voltage-controlled charging • •Voltage flexibility: 1.4 Vcache (single cell) to for 2.8enterprise V / Power failure and write protection 4.2 V /and 5.6HDD Vcharacteristic / 7.0 V / 8.4 V (multiple cells) SSD •clock Non-hazardous Real timein powerthrough-hole sourceelectrolyte • •Available stacked (STH, radial), • Maintenance-free, noand service flatfor flash (SMF) laynecessary flat •surface-mount Burst power support lights, wireless transmitters • Evaluation for are available under (LFC) withkits wire and connectors •configurations Backup power for industrial PC’s andengineering industrial controls ordering MAL219699001E3 Storage device for harvesting • •Useful life: 1000 h energy at code: 70 °C / 85 °C Emergency light and micro UPS power source • Material categorization: for definitions of compliance • •No cell balancing necessary see www.vishay.com/doc?99912 • MARKING Soft and please low transient-voltage-controlled charging characteristic The capacitors are marked with the following information: APPLICATIONS • •Non-hazardous electrolyte Rated capacitance (in F) • Power backup for memory controller, flash backup, RAID Rated voltage (in V)no SRAM, • •Maintenance-free, serviceDRAM necessary systems, Date code• Power • •Evaluation kits forfailure engineering available under and writeare cache protection for enterprise •ordering Negativecode: / positive terminal MAL219699001E3 SSD and HDD identification • PACKAGING Material categorization: forpower definitions • Real time clock source of compliance please see www.vishay.com/doc?99912 Supplied in •ESD trays only support for flash lights, wireless transmitters Burst power • Backup power for industrial PC’s and industrial controls APPLICATIONS • Storage device controller, for energy flash harvesting • Power backup for memory backup, RAID •VALUE Emergency systems, SRAM, DRAM light and micro UPS power source 2 CELLS 3 CELLS 4 CELLS 5 CELLS CELLS • Power failure and write cache protection 6for enterprise MARKING 7x5 7and x 7.5HDD 7 x 10 7 x 12.5 7 x 15 SSD12 12 x 5 x 7.5The capacitors 12 x 10 are marked 12 x 12.5with the 12following x 15 information: • Real clock 35 power 35 x 25 x 7.5 35 xtime 25 x 10 x 25 xsource 15 • Rated capacitance (in F) 7 x 14 x 2.5• Burst 13 x 14 x 2.5 support 14 x 14for x 2.5 power flash lights, wireless transmitters • Rated 12 x 24 x 2.5 22 x 24 x 2.5 24 xvoltage 24 x 2.5 (in V) • Backup for industrial PC’s and industrial controls - power • Date code • Storage device for energy harvesting • Negative / positive terminal identification 14.5 x 24 x 2.5 14.5 x 36 x 2.5 14.5 x 48 x 2.5 14.5 x 60 x 2.5 14.5 x 72 x 2.5 • Emergency light and micro UPS power source 4.0 F 15.0 F 90.0 F Tolerance on CR at 20 °C 2.8 V Rated voltage, UREFERENCE QUICK DATA1.4 V R 1.6 V 3.2 V Maximum surge voltage, US (max. 30 s) DESCRIPTION 4 Ws 9 Ws SINGLE CELL Minimum stored energy 17 Ws 35 Ws 7 x 2.5230 Ws is not NominalImage case size (ØtoDscale x L in mm) 12 x 2.5 Energy density 4.0 F PACKAGING 4.0 F 4.0 F MARKING 15.0 F F Supplied15.0 in ESD trays15.0 onlyF 4.0 F 15.0 F 90.0 F 90.0 F with the following information: The capacitors are marked -20 % to +80 %(in F) • Rated capacitance V V 7.0 V 8.4 V • Rated4.2 voltage (in V)5.6 4.8 V 6.4 V 8.0 V 9.6 V VALUE • Date13 code Ws 18 Ws 22 Ws 27 Ws CELLS 3 CELLS 4 CELLS 5 CELLS • 2Negative identification 52 Ws/ positive 70terminal Ws 87 Ws 105 Ws 6 CELLS 7 x 345 5 Ws 7 x460 7.5Ws 7 x 10 7 x 12.5 7 x 15 PACKAGING 12 x 59 Ws/g to 13 12Ws/g x 7.5 12 x 10 12 x 12.5 12 x 15 Stacked Through-Hole (STH) 35 x 25 x 7.5 35trays x°C25 10 °C 35 x 25 x 15 Supplied in 4.0ESD F: -20 toxonly +70 Category temperature range 7 x 7 x 2.5 7 x15.0 14 Fx /2.5 14tox+85 2.5°C 14 x 14 x 2.5 90.0 F: 13 -20x°C Nominal case size (Ø W x L x H in mm) 12 x 12 x 2.5 12 x 24 x 2.5 22 24tox+85 2.5°C 24 x 24 x 2.5 temperature range -40x°C Surface-Mount Flat (SMF) QUICKStorage REFERENCE DATA - 1000 h 4.0 F: -at 70 °C: 1000 h 15.0- F / 90.0 F: at 85 °C: VALUE Nominal size (W x L x H in mm) at 55 °C: 2800 at 70 °C: x2800 Useful life at Ucase R DESCRIPTION 14.5 x 12 x 2.5 14.5hx 24 x 2.5 14.5 x 36 x 2.5 14.5 x 48 2.5 h14.5 x 60 x 2.5 14.5 x 72 x 2.5 SINGLE CELL 2atCELLS 4 CELLS at 605°C: CELLS 6 CELLS Lay Flat (LFC) 45 °C: 5600 h 3 CELLS 5600 h 7 x 2.5 7.5 category 7 xF 12.5 4.0 7F x 5 4.0 Fx upper 4.07 Fx 10 4.0 4.07 Fx 15 4.0 F Shelf size life (Ø D xwww.vishay.com 1000 h7at temperature Nominal case L in mm) 12 Fx 7.525/085/21 12FxVishay 10 12 xF 12.5 12 Fx 15 Rated capacitance range, CR 12 x 2.5 15.012F x 5 15.0 15.0 15.0 15.0 15.0 F BCcomponents Climatic category IEC 60068 Stacked Through-Hole (STH) 35 x 25 x 7.5 35 x F 25 x 10 35 x F25 x 15 90.0 90.0 90.0 F- 196 HVC ENYCAP™ Revision 14-Oct-14 7 x 7 x 2.5 7 x 14 x 2.51 13 x 14 x 2.5 14-20 x 14%x to 2.5+80 %Document Number: 28409 °C 14-Oct-14 NominalRevision: caseTolerance size (Ø W on x LCxRHatin20mm) 12 x, 12 12 xAT 2.5UPPER 22 x 2.5 24 24 x 2.5 1.4xV24contact: 2.8x V24 4.2xV 5.6 V- (UCT) 7.0 V8.4 V Rated voltage, UR SELECTION CHART FOR C U-Rx, 2.5 AND FORM CATEGORY TEMPERATURE For questions, [email protected] Surface-Mount Flat (SMF) R technical 30 s) WITHOUT 1.6 VNOTICE. THEU 3.2 V 4.8 V HEREIN AND 6.4THIS V DOCUMENT 8.0 V 9.6 V Maximum surge voltage, US (max. (V) C THIS DOCUMENT IS SUBJECT TO CHANGE PRODUCTS DESCRIBED R R Nominal case size (W x L x H in mm) FORM ARE SPECIFIC FORTH 4 Ws 9 Ws 13 Ws 18 Ws 22 Ws 14.5TO x 12 x 2.5 DISCLAIMERS, 14.5 x 24 x4.2 2.5SET14.5 x 36ATx www.vishay.com/doc?91000 2.5 x 48 x 2.57.014.5 x 60 x 2.5 8.4 14.5 x 72 x 2.5 27 Ws (F) 1.4 SUBJECT 2.8 5.6 14.5 Lay Flat (LFC) Minimum stored 17 Ws 7.0 x 7.5 35 Ws 7.0 x 10.052 Ws 70 Ws 105 Ws A2 7.0energy x 2.5 7.0 x 5.0 7.0 x 12.5 7.0 x 87 15.0Ws 4.0 F 4.0 F 4.0 F 4.0 F 4.0 F 230 Ws 345 Ws 460 4.0 Ws F B2 Rated capacitance range, C 15.0 F 15.0 F 15.0 F 15.0 F 15.0 F 15.0 F 7.0 x 2.5 7.0 x 5.0 7.0 x 7.5 7.0 x 10.0 7.0 x 12.5 7.0 x 15.0 Energy 9 Ws/g to 13 Ws/g B3 densityR 90.0 F 90.0 F 90.0 F 4 4.0 F: -20 °C C 7.0 x 7.0 x 2.5 - to +70 °C Tolerance on Category CR at 20 °C -20 % to +80 % temperature range D 7.0 x 7.0 x 2.5 - to +85 °C 15.0 F / 90.0 F: -20 °C V x 2.5 2.8 xV 14.0 x 2.5 4.2 V x 14.0 x 2.5 5.6 V 7.0 V 8.4 V Rated voltage, UR E - range 7.01.4 x 14.0 13.0 14.0 - to +85 Storage temperature -40 °C °C (max. 30 s) 1.6 3.212.0 V x 7.5 4.8 12.0 V x 10.0 6.4 V 12.0 x 12.5 8.0 V 12.0 x 15.0 9.6 V Maximum surge voltage, US12.0 A2 x 2.5 12.0Vx 5.0 4.0 F: at 70 °C: 1000 h 15.0 F / 90.0 F: at 85 °C: 1000 h 4 Ws 9 Ws 13 Ws 18 Ws 22 Ws 27 Ws B2 x 2.5 12.0 12.0hx 10.0 70 Ws12.0 x 12.5 87 Ws 12.0 x 15.0 at 55 °C: at 70 °C: 2800 Useful life at U12.0 R Minimum stored energy 17 Wsx 5.0 35 12.0 Ws x 7.5 522800 Ws 105 Ws h B3 at 60 230 Ws- at 45 °C: 3455600 Ws h460 Ws C 12.0 x 12.0 x 2.5 - °C: 5600 h 15 ShelfDlife 12.0 x 12.0 x 2.5 1000 at Ws/g upper category Energy density 9 Ws/g -toh13 - temperature Climatic E category IEC 60068 12.0 x 24.0 x 2.5 22.0 x 24.0 x 2.5 24.0 24.0 4.0x F: -20x 2.5 °C to25/085/21 +70 °C Category temperature range F 14.5 x 12.0 x 2.5 14.5 x 24.0 x 2.5 14.5 x 36.0 x15.0 2.5 F /14.5 48.0 14.5°C x 60.0 x 2.5 14.5 x 72.0 x 2.5 90.0x F: -20x 2.5 °C to +85 G 14-Oct-14 Revision: Storage temperature range 135 x 25-40 90 35 x 25 x 7.5 35 x 25 x 10 x 15°C to +85 °C - Document Number: 28409 H 4.0 at 70 °C: 1000 h contact: [email protected] 15.0 F / 90.0 F: at 85 °C: 1000 h ForF:technical questions, at 55WITHOUT °C: 2800 hNOTICE. THE PRODUCTS DESCRIBED at 70 °C: 2800 AND h Useful life at UR THIS DOCUMENT IS SUBJECT TO CHANGE HEREIN THIS DOCUMENT in millimeters AVAILABLE at 45FORMS °C:DISCLAIMERS, 5600 at 60 °C: 5600 VMN-PT0394-1410 h AREAND SUBJECT TO SPECIFIC SET FORTH AT www.vishay.com/doc?91000 2/2h PRODUCTDIMENSIONS SHEET Shelf life 1000 h at upper category temperature STACKED THROUGH HOLE CONFIGURATION (STH): Examples VERTICAL MOUNT Climatic category IEC 60068 25/085/21 Ø Dmax. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC - PRODUCTS DESCRIBED HEREIN Revision: 14-Oct-14 Document Number: 28409 1 DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 For technical questions, contact: [email protected]