Packaging: Radial Aluminum Capacitors www.vishay.com Vishay BCcomponents Aluminum Capacitors TAPING BCcomponents radial, aluminum and solid aluminum capacitors in sizes up to Ø D = 16 mm, are available in taped versions corresponding to “IEC 60286-2” or “JIS C 0805” respectively. They are most suitable for use on automatic insertion machines, mounting robots or cutting and forming equipment and are supplied in boxes (ammopacks). CAUTION Packages must be handled with care to avoid bent leads The information contained within this part is valid for the following series: • 013 RLC • 036 RSP • 116 RLL For catalog numbers, refer to the relevant detail specification in this data book. P P2 ØD Δp Δh Δp Δh A H1 F P1 Ød 2.5 max. P1 1.5 max. H 11 max.9 ± 0.5 H0 6 min. 18 ± 0.5 1 max. (1) 12.7 ± 0.3 (1) 4 ± 0.2 Tolerance over any 20 pitches: ± 1.0 mm A 0.9 max. detail A Fig. 1 - Form TNA and TFA, straight leads Fig. 2 - Form TFA, formed leads Table 1 DIMENSIONS in millimeters PARAMETER ØD A Ød P P1 P2 F h p H H0 H1 Revision: 11-Nov-15 FORM TNA: F = 2.5 5 x 11 (straight leads) 5.5 12 0.5 12.7 5.1 6.35 2.5 0 0 18 32 NOMINAL CASE SIZE (Ø D x L) FORM TFA: F = 5 5 x 11 8.2 x 11 (formed leads) (straight leads) 5.5 8.7 12 12 0.5 0.6 12.7 12.7 3.85 3.85 6.35 6.35 5.0 5.0 0 0 0 0 18 18 16 32 32 TOLERANCE max. max. ± 0.05 ± 1.0 ± 0.7 ± 0.7 + 0.6 / - 0.1 ± 2.0 ± 1.3 + 1.5 / - 0 ± 0.5 max. Document Number: 28360 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging: Radial Aluminum Capacitors www.vishay.com Vishay BCcomponents Table 2 QUANTITIES PER PACKAGING UNIT NOMINAL CASE SIZE (Ø D x L) (mm) CASE CODE 5 x 11 8.2 x 11 BULK PER BOX TAPED AMMOPACK (1) FORM CA FORM CB FORM TFA FORM TNA 11 1000 1000 2000 2000 13 1000 1000 1000 1000 Note (1) Ammopack taping (Form TFA) case Ø D x L = 8.2 mm x 11 mm. To ensure optimum straightness of the leads and correct position of the capacitors in the folding area of the zig-zag shaped tape, every 25th capacitor is omitted. 340 max. 54 max. 305 max. Fig. 3 - Ammopack; Forms TFA and TNA Revision: 11-Nov-15 Document Number: 28360 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging: Radial Aluminum Capacitors www.vishay.com Vishay BCcomponents The information contained within this part is valid for the following series with a case Ø D = 4 mm to 8 mm: • 134 RLP 5 • 097 RLP 7 • 038 RSU • 142 RHS • 150 RMI P P2 Δp ØD Δh Δh Δp A H1 P1 F 2.5 max. Ød P1 1.5 max. H H0 11 9.0 max. ± 0.5 12.5 18 ± 0.5 A 1.0 max. 4 ± 0.2 D x L = 5 x 11 to 8 x 12 (1) Tolerance over any 20 pitches: ± 1.0 mm 0.9 max. 12.7 ± 0.3 (1) D x L = 5 x 11 to 8 x 12 detail A Fig. 4 - Form TNA, straight leads Fig. 5 - Form TFA, formed leads Table 3 DIMENSIONS in millimeters NOMINAL CASE SIZE (Ø D x L) in mm PARAMETER FORM TNA FORM TFA TOLERANCE 5 x 11 6.3 x 11 8 x 12 8 x 15 5 x 11 6.3 x 11 8 x 12 8 x 15 ØD 5.5 6.8 8.5 8.5 5.5 6.8 8.5 8.5 max. A 12.5 12.5 13.0 16.0 12.5 12.5 13.0 16.0 max. Ød 0.5 0.5 0.6 0.6 0.5 0.5 0.6 0.6 ± 0.05 P 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 ± 1.0 P1 5.1 5.1 4.6 4.6 3.85 3.85 3.85 3.85 ± 0.7 P2 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 ± 1.0 F 2.5 2.5 3.5 3.5 5.0 5.0 5.0 5.0 + 0.8 / - 0.2 h 0 0 0 0 0 0 0 0 ± 2.0 p 0 0 0 0 0 0 0 0 ± 1.3 H 18.5 18.5 18.5 18.5 18.5 18.5 20.0 20.0 ± 0.75 H0 - - - - 16.0 16.0 16.0 16.0 ± 0.5 H1 32.2 32.2 32.2 35.2 32.2 32.2 33.7 36.7 max. Revision: 11-Nov-15 Document Number: 28360 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging: Radial Aluminum Capacitors www.vishay.com Vishay BCcomponents P P2 ØD Δp Δp F P1 Δh A H1 Ød 1.5 max. 1.5 max. H H0 11 9.0 ± 0.5 max. 6.0 18 ± 0.5 min. A 1.0 12.7 ± 0.3 (1) 4 ± 0.2 0.9 max. D x L = 4 x 5 to 6.3 x 7 (1) Tolerance over any 20 pitches: ± 1.0 mm detail A Fig. 6 - Form TFA and TNA Table 4 DIMENSIONS in millimeters NOMINAL CASE SIZE (Ø D x L) PARAMETER FORM TFA TOLERANCE 4x5 5x5 6.3 x 5 4x7 5x7 6.3 x 7 ØD 4.5 5.5 6.8 4.5 5.5 6.8 max. A 6.0 6.0 6.0 8.0 8.0 8.0 max. Ød 0.45 0.45 0.45 0.45 0.45 0.45 ± 0.05 P 12.7 12.7 12.7 12.7 12.7 12.7 ± 1.0 P1 3.85 3.85 3.85 3.85 3.85 3.85 ± 0.7 P2 6.35 6.35 6.35 6.35 6.35 6.35 ± 1.0 F 5.0 5.0 5.0 5.0 5.0 5.0 + 0.8 / - 0.2 h 0 0 0 0 0 0 ± 2.0 p 0 0 0 0 0 0 ± 1.3 H 17.5 17.5 17.5 17.5 17.5 17.5 ± 0.75 H0 16 16 16 16 16 16 ± 0.5 H1 32.2 32.2 32.2 32.2 32.2 32.2 max. Revision: 11-Nov-15 Document Number: 28360 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging: Radial Aluminum Capacitors www.vishay.com Vishay BCcomponents Table 5 DIMENSIONS in millimeters NOMINAL CASE SIZE (Ø D x L) PARAMETER FORM TNA TOLERANCE 4x5 5x5 6.3 x 5 4x7 5x7 6.3 x 7 ØD 4.5 5.5 6.8 4.5 5.5 6.8 max. A 6.0 6.0 6.0 8.0 8.0 8.0 max. Ød 0.45 0.45 0.45 0.45 0.45 0.45 ± 0.05 P 12.7 12.7 12.7 12.7 12.7 12.7 ± 1.0 P1 5.1 5.1 5.1 5.1 5.1 5.1 ± 0.7 P2 6.35 6.35 6.35 6.35 6.35 6.35 ± 1.0 F 2.5 2.5 2.5 2.5 2.5 2.5 + 0.8 / - 0.2 h 0 0 0 0 0 0 ± 2.0 p 0 0 0 0 0 0 ± 1.3 H 17.5 18.5 18.5 17.5 18.5 18.5 ± 0.75 H0 16 - - - - - ± 0.5 H1 32.2 32.2 32.2 32.2 32.2 32.2 max. 340 max. 54 max. 305 max. Fig. 7 - Ammopack; Form TFA and TNA Revision: 11-Nov-15 Document Number: 28360 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging: Radial Aluminum Capacitors www.vishay.com Vishay BCcomponents The information contained in this part is valid for the following series with a case Ø D = 10 mm to 16 mm: • 146 RTI / 246 RTI-V • 038 RSU • 148 RUS • 048 RML • 150 RMI / 250 RMI-V • 136 RVI • 152 RMH • 140 RTM • 160 RLA • 142 RHS P P2 ØD Δh Δh P2 P2 A P P H1 P1 F Ød 1.5 max H P1 P1 9 ± 0.5 12 min 18 ± 0.5 4 1.5 ± 0.2 max. 12.7 ± 0.3 (1) A 0.9 max. Ø D = 12.5 mm Ø D = 16 mm detail A Ø D = 10 mm Tolerance over any 20 pitches: ± 1.0 mm (1) Fig. 8 - Form TFA Table 6 DIMENSIONS in millimeters PARAMETER ØD A Ød P P1 P2 F h H H1 B 10 x 12 10.5 13.5 0.6 12.7 3.85 6.35 5.0 0 18.5 10 x 16 10.5 17.5 0.6 12.7 3.85 6.35 5.0 0 18.5 10 x 20 10.5 22 0.6 12.7 3.85 6.35 5.0 0 18.5 54 62 62 NOMINAL CASE SIZE (Ø D x L) 12.5 x 20 12.5 x 25 16 x 20 13.0 13.0 16.5 22 27 22 0.6 0.6 0.8 25.4 25.4 25.4 3.85 3.85 8.95 6.35 6.35 12.7 5.0 5.0 7.5 0 0 0 18.5 18.5 18.5 H1 = H + A 62 68 68 340 max. 16 x 25 16.5 27 0.8 25.4 8.95 12.7 7.5 0 18.5 16 x 31 16.5 33.5 0.8 25.4 8.95 12.7 7.5 0 18.5 68 75 TOLERANCE max. max. ± 0.05 ± 1.0 ± 0.7 ± 1.3 + 0.8 / - 0.2 ± 3.0 ± 0.75 max. B max. 310 max. Fig. 9 - Ammopack; Form TFA Note (1) Ammopack taping (Form TFA). To ensure optimum straightness of the leads and correct position of the components in the folding area of the zig-zag shaped tape, where necessary, one capacitor is omitted at each folding edge. Revision: 11-Nov-15 Document Number: 28360 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging: Radial Aluminum Capacitors www.vishay.com Vishay BCcomponents The information contained within this part is valid for the following series: • 128 SAL-RPM T P2 P Δh Wb 0.2 max. P1 H1 Ød 0.5 max. 11 max. 6 ± 0.5 H 9 ± 0.5 - 0.2 A 18 ± 0.5 F 12.7 ± 0.2 (1) 4 ± 0.2 0.9 max. → direction of tape transport for Form TR + (positive leading) (1) Tolerance over any 20 pitches: ± 1.0 mm detail A Fig. 10 - Capacitors on tape Table 7 TAPING DIMENSIONS in millimeters 128 SAL-RPM MAX. HEIGHT 9.5 mm PARAMETER TOLERANCE CASE CODE 10 20 30 40 50 60 T 3.0 3.5 4.0 5.0 5.0 6.0 max. Wb 7.0 7.0 7.0 7.0 8.0 8.0 max. Ød 0.6 0.6 0.6 0.6 0.6 0.6 + 0.02 / - 0 P 12.7 12.7 12.7 12.7 12.7 12.7 ± 1.0 P1 3.85 3.85 3.85 3.85 3.85 3.85 ± 0.7 P2 6.35 6.35 6.35 6.35 6.35 6.35 ± 1.0 F 5.2 5.2 5.2 5.2 5.2 5.2 ± 0.2 h 0 0 0 0 0 0 ± 1.0 H 18.5 18.5 18.5 18.5 18.5 18.5 ± 0.75 H1 28 28 28 28 28 28 max. Revision: 11-Nov-15 Document Number: 28360 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging: Radial Aluminum Capacitors www.vishay.com Vishay BCcomponents 52 max. 340 max. 4 30 77 85.6 355 178 max. 5 22 3 3 1 1 = capacitor 2 = tape 3 = paper 4 = flange 5 = cylinder preferred packaging Fig. 11 - Ammopack; Form TFA 2 42 52 Fig. 12 - Reel; Form TR+ Table 8 QUANTITIES PER PACKAGING UNIT TAPED PER REEL TAPED PER BOX FORM CB FORM TR+ FORM TFA 1000 1000 1000 1000 1000 1000 1000 30 1000 1000 1000 1000 9.5 x 7.0 x 5.0 40 1000 1000 1000 1000 9.5 x 8.0 x 5.0 50 1000 1000 1000 1000 9.5 x 8.0 x 6.0 60 1000 1000 1000 1000 CASE SIZE Hmax. x Wmax. x Tmax. (mm) CASE CODE FORM CA 9.5 x 7.0 x 3.0 10 1000 9.5 x 7.0 x 3.5 20 9.5 x 7.0 x 4.0 Revision: 11-Nov-15 BULK PER BOX Document Number: 28360 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000