Packaging: SMD Aluminum Capacitors www.vishay.com Vishay BCcomponents Aluminum Capacitors TAPE AND REEL DATA The information contained within this part is valid for the following series: • 139 CLL For catalog numbers, refer to the relevant detail specification in this data book. Vishay BCcomponents SMD aluminum capacitors are available in taped version based on IEC 60 286-3. They are most suitable for use on automatic placement machines and are supplied in blister tape on reel. 4 + 0.1 (1) 1.5 + 0.10 2 ± 0.1 0.4 typ. 1.75 ± 0.1 F W B0 B1 0.75 min. A0 1.5 min. T2 P1 feed direction Note (1) Tolerance over any pitches: ± 0.2 mm Fig. 1 - Blister tape Table 1 BLISTER TAPE: DIMENSIONS in millimeters AND PACKAGING QUANTITIES PARAMETER CASE CODE 139 CLL TOLERANCE 2 3 - Lnom. 14.3 14.3 - Wnom. 6.2 7.6 - Hnom. 6.9 8.2 - W 24 24 ± 0.3 max. CASE SIZE T2 7.7 9.1 F 11.5 11.5 ± 0.1 P1 12 12 ± 0.1 A0 6.5 7.9 ± 0.2 B0 14.8 14.8 ± 0.2 B1 15.5 15.5 max. Quantity per reel 700 700 - Revision: 11-Nov-15 Document Number: 28359 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging: SMD Aluminum Capacitors www.vishay.com Vishay BCcomponents The information contained within this part is valid for the following series: • 153 CRV • 140 CRH • 150 CRZ / 250 CRZ-V • 146 CTI / 246 CTI-V • 160 CLA / 260 CLA-V • 180 CPS • 181 CPL For catalog numbers, refer to the relevant detail specification in this data book. 4 ± 0.1 1.75 ± 0.1 1.5 + 00.1 2 ± 0.1 0.4 typ. F W B0 A0 P1 T2 feed direction Fig. 2 - Blister tape (0405 to 1216) 4 + 0.10 1.75 ± 0.1 (2 x) 0.5 typ. 0.2 ± 0.05 F B0 W A0 T2 2 ± 0.1 P1 4 ± 0.1 Fig. 3 - Blister tape (1616 to 1821) Table 2 BLISTER TAPE: DIMENSIONS in millimeters AND PACKAGING QUANTITIES PARAMETER CASE CODE CASE SIZE Lnom. Wnom. Hnom. W T2 F P1 A0 B0 Quantity per reel Revision: 11-Nov-15 0405 153 CRV; 140 CRH; 150 CRZ; 146 CTI; 160 CLA; 250 CRZ-V; 246 CTI-V; 260 CLA-V 0505 0605 0807 0810 1010 1012 1014 1213 1216 1616 1621 1816 1821 TOLERANCE - 4.0 4.0 5.3 12 6.0 5.5 8 5.0 5.0 2000 5.0 5.0 5.3 12 6.0 5.5 12 6.0 6.0 1000 18.0 18.0 21.0 44 23.4 20.2 32 19.4 19.4 100 ± 0.3 max. ± 0.1 ± 0.1 ± 0.3 ± 0.3 - 6.3 6.3 5.3 16 6.0 7.5 12 7.0 7.0 1000 8.0 8.0 6.5 16 7.0 7.5 12 8.7 8.7 1000 8.0 8.0 10.0 24 11.6 11.5 16 8.7 8.7 500 10.0 10.0 10.0 24 11.6 11.5 16 10.5 10.5 500 10.0 10.0 12.0 24 13.0 11.5 16 10.5 10.5 250 10.0 10.0 14.0 24 15.4 11.5 16 10.5 10.5 250 12.5 12.5 13.0 24 16.2 11.5 20 13.5 13.5 250 12.5 12.5 16.0 32 18.5 14.2 24 13.5 13.5 200 16.0 16.0 16.0 44 18.9 20.2 28 17.4 17.4 150 16.0 16.0 21.0 44 23.4 20.2 28 17.4 17.4 100 18.0 18.0 16.0 44 18.9 20.2 32 19.4 19.4 125 Document Number: 28359 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Packaging: SMD Aluminum Capacitors www.vishay.com Vishay BCcomponents Table 3 BLISTER TAPE: DIMENSIONS in millimeters AND PACKAGING QUANTITIES PARAMETER CASE CODE CASE SIZE Lnom. Wnom. Hnom. W T2 F P1 A0 B0 Quantity per reel 0506 0604 0606 180 CPS; 181 CPL 0608 0807 0812 1008 1013 TOLERANCE - 5.3 5.3 5.7 12 6.2 5.5 12 5.7 5.7 1000 6.6 6.6 4.4 16 5.8 7.5 12 7.0 7.0 1000 6.6 6.6 5.9 16 6.2 7.5 12 7.0 7.0 1000 6.6 6.6 7.7 16 8.3 7.5 12 7.0 7.0 1000 8.4 8.4 12.0 16 13.0 11.5 16 8.7 8.7 400 10.4 10.4 7.7 24 10.0 11.5 16 10.7 10.7 500 10.4 10.4 12.6 24 14.0 11.5 16 10.7 10.7 400 ± 0.3 ± 0.2 ± 0.1 ± 0.1 ± 0.2 ± 0.2 - Nmin. W1 50 50 50 50 50 14 18 26 34 46 8.4 8.4 6.7 16 6.8 7.5 12 8.7 8.7 1000 13 ± 5 0. Nmin. Amax. W1 Fig. 4 - Reel for blister tape Table 4 REEL DIMENSIONS in millimeters TAPE WIDTH 085 CS 139 CLL 12 16 24 32 44 330 330 - Amax. 153 CRV; 140 CRH (2); 150 CRZ (2); 146 CTI (2); 160 CLA (2); 250 CRZ-V (2); 246 CTI-V (2); 260 CLA-V (2); 180 CPS; 181 CPL CASE SIZE 1012, 1014 CASE SIZE 1010, 1213 380 380 330 330 or 380 (1) 380 380 Notes (1) Depending on production location (2) Delivered with plastic reel • General remarks: - ESD plastic reel material: polystyrene (PS) - Electrostatic resistance according to IEC 61340-5-3: 105 < Rx 1012 (applied voltage: 100 V) Revision: 11-Nov-15 Document Number: 28359 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000