V is h ay I n tertec h n o l o g y, I n c . I INNOVAT AND TEC O L OGY 096 PLL-4TSI N HN VISHAY BCcomponents O 19 62-2012 Capacitors - Long Life, 4-Terminal, Snap-In 096 PLL-4TSI Long-Life 4-Terminal Snap-In Aluminum Power Capacitors Key Benefits • • • • • • • • • • Up to 500 V available Case sizes larger than standard snap-in, 35 x 50 mm up to 45 x 100 mm 4-terminal snap-in for stable mounting on PC board Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, minimized dimensions, cylindrical aluminum case, insulated with a blue sleeve Pressure relief on the side of the aluminum case Very long useful life: 5000 hours at 85 °C Temperature range up to 85 °C Keyed polarity Low ESR, high ripple current capability APPLICATIONS • • • • Solar systems Uninterruptible power supplies (UPS) Motor drives Wind energy systems Resources • Datasheet: 096 PLL-4TSI - http://www.vishay.com/doc?28392 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 RoHS One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components COMPLIANT e3 PRODUCT SHEET 1/2 VMN-PT0221-1204 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FEATURES FEATURES FEATURES • Polarized aluminum electrolytic capacitors, • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Polarized aluminum electrolytic capacitors, non-solid electrolyte non-solid • Large types, electrolyte minimized dimensions, cylindrical • Large types, minimized dimensions, cylindrical aluminum case, insulated with a blue sleeve • Large types, minimized dimensions, cylindrical aluminum case, insulated with a blue sleeve AND TEC aluminum case, insulated withaluminum a blue sleeve • Pressure relief on the side of the case N • Pressure relief on the side of the aluminum case O case • Pressure relieflife: on the side of 85 the°C aluminum • Very long useful 5000 h at • Very long useful life: 5000 •h Very at 85long °C useful life: 5000 h at 85 °C • Temperature range up to 85 °C • Temperature range up to 85 °C • Temperature • Keyed polarity range up to 85 °C • Keyed polarity • Keyed polarity • Low ESR, high ripple current capability • Low ESR, high ripple current capability • Low ESR, ripple current capability • Compliant to high RoHS Directive 2002/95/EC • Compliant to RoHS Directive 2002/95/EC Vishay BCcomponents • Compliant to RoHS Directive 2002/95/EC1 9 6 2 0 1 2 V is h ay I n tertec h n o l o g y, I n c . I INNOVAT 096 PLL-4TSI APPLICATIONS -2 4-Terminal Snap-In Aluminum Power Capacitors APPLICATIONS and industrial systems • Telecommunication • Telecommunication and industrial systems longer life 096 095 • Telecommunication industrial systems • Smoothing and filteringand applications longer life 096 095 • Smoothing and filtering applications longer life 096 095 • Smoothing and filtering applications • Switched mode power supplies www.vishay.com • Switched mode power supplies Fig. 1 • Switchedenergy mode power • Renewable power supplies converters Fig. 1 • Renewable energy power converters Fig. 1 • Renewable power converters • Energy storageenergy in pulse systems FEATURES • Energy storage in pulse systems ininmillimeters AND AVAILABLE FORMS • Energy storage pulse systems • DIMENSIONS For excellent mounting stability QUICK •REFERENCE DATA electrolytic capacitors, Polarized aluminum • For excellent mounting stability QUICK REFERENCE DATA • For excellent mounting stability QUICKnon-solid REFERENCE DATA VALUE DESCRIPTION electrolyte PRINTED WIRING MARKING DESCRIPTION VALUE DESCRIPTION Nominal case size types, minimized dimensions, 35 VALUE x 50 cylindrical MARKING • Large MARKING The capacitors are marked (where possible) with the Nominal case size 35 x 50 case, insulated with (D xNominal L in mm) toThe 45a35 xblue 100 aluminum case size x 50sleeve are marked capacitors possible) with the (where possible) with the (D x L in mm) to 45 x 100 following information: The(where capacitors are marked (D xcapacitance L in mm) to 45 x 100 390 μF to 2700 μF Rated range C following information: R •390 Pressure relief following information: μF to 2700 μFon the side of the aluminum case Rated capacitance range CR • Rated capacitance (in μF) 390 μF to 2700 μF Rated capacitance range CR ± 20 % Tolerance on C R • Rated capacitance (in μF) • Very± long 20 %useful life: 5000 h at 85 °C Tolerance on CR • Rated capacitance (in μF) capacitance, code letter in • Tolerance code on rated ± 20 Tolerance CR UR 350 V to 500%V Rated voltageon range, capacitance, code letter • 350 Temperature accordance with IECon 60062 (Mincapacitance, for ± 20 %) code letter in V to 500 V range up to 85 •°CTolerance code on rated Rated voltage range, UR • Tolerance code rated 500 Rated voltage range,range UR Category temperature - 40 350 °Caccordance toV +to85 °CV with IEC 60062 (M for ± 20 %) accordance with •- 40 Keyed Category temperature range °C topolarity + 85 °C • Rated voltage (in V) IEC 60062 (M for ± 20 %) Categorytest temperature - 40 °C to + 85 °C Endurance at 85 °C range 2000 h • Rated voltage (in V) Endurance test at 85 °C 2000 h • Rated voltage (in V) • Low ESR, high ripple current 5000 capability • Date code (YYMM) Endurance test 2000 h Useful life at 85 °Cat 85 °C h code Date (YYMM) ØD Useful life at 85 °C 5000 h to RoHS Directive•2002/95/EC • Dateofcode (YYMM) • Name manufacturer + 1 max. Useful life at 85 5000 h Useful life• atCompliant 40 °C,°C • Name 200 000 h of manufacturer Useful life at 40 °C, • Name manufacturer 1.4Useful x IR applied • Code for of factory of origin life at200 40 000 °C, h 1.4 x IR applied APPLICATIONS 200 000 h •1000 Code 1.4life x IRatapplied Shelf 0 V, 85 °C h for factory of origin • Code foridentify factory the of origin • “-” sign to negative terminal, visible from the Shelf life at 0 V, 85 °C 1000 h •sectional Telecommunication and industrial systems • “-” sign terminal, visible from the terminal, visible from the top and side the capacitor Shelfonlife at 0 V, www.vishay.com 85 °C 1000 h to identify the negative Based • “-” sign to of identify the negative Vishay BCcomponents IECapplications 60384-4/EN130300 longer life 096 095 L+ top and side of the capacitor Based on sectional • Smoothing and filtering specification IECon60384-4/EN130300 top number and side of theLcapacitor 5 max. Based sectional • Code specification IEC 60384-4/EN130300 • Code number specification Climatic category IEC 60068 40/085/56 • Switched mode power supplies • Code number • Climatic category in accordance with IEC 60068 Climatic category IEC 60068 40/085/56 www.vishay.com DIMENSIONS inIEC millimeters AND FORMS Fig. 1 •AVAILABLE Climatic category in accordance withcategory IEC 60068 Climatic 60068 40/085/56 • category Renewable energy power converters • Climatic in accordance with IEC 60068 www.vishay.com 4.9 • Energy storage in pulse systems Vishay PRINTED WIRING CCA976-1 (Ø D x L in SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES mm)BCcomponents ± 0.2 SELECTION CHART FOR CR•, For UR,excellent AND RELEVANT SIZESNOMINAL (Ø D x L inCASE mm)in millimeters mounting QUICK REFERENCE DATA DIMENSIONS FORMS SELECTION CHART FOR stability C NOMINAL , U , AND CASE RELEVANT SIZES (Ø DAND x L inAVAILABLE mm) 1 3 - 2 Capacitors - Long Life, 4-Terminal, Snap-In Capacitors 096Aluminum PLL-4TSI Long-Life Power Long Life 4-Terminal Snap-In APPLICATIONS O L OGY 096 PLL-4TSI www.vishay.com HN VISHAY BCcomponents 096 PLL-4TSI 096 PLL-4TSI UR (V) R R CR UR (V) AVAILABLE FORMS in millimeters AND (μF)DIMENSIONS UR (V) WIRING - Printed wiring 350 385 400 420 Fig.22.5 450 pin version 500 C MARKING R PRINTED 385 400 420 450 500 Ø D = 35 mm) (Case (μF) 390The capacitors - 350 - 385 possible) with - 400the - 420 - 450 35 x 500 60 (where PRINTED- WIRINGare marked 35 x 60 following information: x 60 470390 - - - - - 35 35 x 70 35 x 70 470 - (in μF) 35 x 70 35 x 70 • Rated capacitance 560 35 x 60 2.5 35 x 70 40 35 x 60 -code letter in 35 x 60 x 70 • Tolerance code - on rated capacitance, 40 x 60 235 x 60 560 40 x 60 35 x 50 35 x 60 35 x 60 35 x 70 35 x 80 60062 (M for ± 20 35 %)x 60 680 accordance - IEC 35 x 50 with 35 x 70 40 x 50 35 x 80- 40 x 503 Ø D 35 x 60 40 x 50 40 35 x 50 40 35 x 70 35 x 50 x 60 35 x 60 35 x 70 x 80 + 1 max. • Rated (in- V) 40 x 50 40 xvoltage 50 40 x 50 40 x 50 15 ± 0.1 40 x 70 680 40 x 50 40 x 50 40 x 50 40 x 50 40 x 70 35 x 50 35 x 60 35 x 60 35 x 70 35 x 80 35 x 100 820• Date 35code x 60 (YYMM) 35 x 60 40 x 50 35 x 70 40 x 50 35 x 80 40 x 60 35 x 100 401 x 60 40 35 x 40 4035 x 80 x 50 35 x 60 35 x 60 35 x 70 35 x 80 x 100 40 x 50 40 x 50 40 x 60 40 x 60 40 x 80 Ø D 820 2 40 x 40 40 x 50 x 50 40 x 60 x 60 40 x 80 • Name of manufacturer 35 40 x 70 35 x40 100 35 x 60 40 x 100 + 40 1 max. 35 x 70 35 x 70 35 x 100 35 x 80 1000• Code 40 x 60 x 70 35 for x 70factory 35 x 80 40 x 100 3 Ø D 35 x 70 35 x 100 ØD L + 40 35 40 x 50 x 60 x 60 4540 x 70 40+x160 40 x 70 40 35 xof60origin x 70 40 x 60 45 40 x 80 45 x 70+ 45 x 100 x 50 x 60 max. 1 max. 1000 40 x 60 L 35 x 60 45 x 60 40 x 70 max. x5 50 40 x 50the45negative 40 x 60 40 x 6015 ± 0.1 45 x 70 • “-” sign to identify terminal, visible35from the 1.3 45 x 50 45 x 60 1 x 80 35of x 70 35 x 80 40 x 80 top and side the capacitor 35 x 80 (4 x) 1200 40 x 70 40 x 70 45 x 100 IEC1200 60384-4/EN130300 35 x 70 35 x 80 40 x 60 x 80 40 x 80 x 70 x 70 45 x 100 45 40 35 x 70 40 x 70 40 35 x 80 40 x 70 45 35 x 80L + x 60 • Code 40 x 60 40 number x 70 1200 40 x 70 45 x 70 40 x 70 45 x 100 L 7.5 ± 0.1 4.9 40 x 70 5 max. 40 x 60 45 x 60 45 x 70 40/085/56 x 60 L + IEC 60068 35 x 80 inL accordance 35 x45 100 CCA976-1 ± 0.2 category with 17.5 ±100 0.1 40 x 80 40 x 100 40 x 35 x 80 1500• Climatic 35 x 100 5 max. 40 x 100 4035 40 35 x 70 x 80 45 x 100 40 x 80 40 x 100 x 80 x 100 45 x 60 45 x 70 45 x 80 1500 40 x 70 40 x 80 1.3 40 x 80 45 x 70 45 40 40 x 100 45 x L + 5 max. x 60 x 70 L 100 40 x 100 1500 45 x 60 45 40 x 70 45 x 70 x 80 45 x 80 45 x 100 45 x 60 (4 x) 60 mm) 45 x 70 x 80 4.9 Fig. 2CASE -40 Printed wiring pin diagram45viewed from component side 45 x SIZES 60 x 70 Fig. 3 -40Mounting SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL (Øversion D x45 x100 Lx in x 80 40 40 x45 100 x 100 hole CCA976-1 www.vishay.com 1800 45 x=100 www.vishay.com ± 0.2 40 x 80 40 x 100 40 x 100 40 x 100 (Case Ø D = 35 mm) (Case Ø D 35 mm) 7.5 ± 0.1 45 x 60 45 x 70 45 x 80 45 x 80 1800 40 x 80 45 x 80 40 x4.9 100 45 x 80 40 x 100 45 x 100 40 x 100 (V) x 70 CR 45 x 60 1800UR 45 45 x 100 CCA976-1www.vishay.com 17.5 ± 0.1 x 60 45 ± x 0.2 70 45 x 80 45 x 80 40 x45 100 www.vishay.com (μF) 2200 40 45 45 x 100 350 385 420 450x 100 500x 100 40 x 100 400 www.vishay.com Fig. 2 - Printed wiring pin version 45 x 70 2200 45 x 70 - 2200 40 x 100 - 40 x 100 45 x 100 - 40 x 100 45 x 100 x 100 45 x 100 (Case Ø D = 35 - mm) -AVAILABLE 3545x 45 DIMENSIONS in millimeters AND AVAILABLE FORMS www.vishay.com DIMENSIONS in 390 millimeters AND FORMS x -70Printed wiring 2700 45Fig. x45 100 45 xpin 100version x60100 - 3 - Mounting hole-diagram 2 Fig. viewed 5.1 ± 0.1 from component side 2700 45 x 100 45 x 100 45 x 100 - 35 x 70 470 2.5 DIMENSIONS in AND AVAILABLE FORMS (Case Ø Dmillimeters = 3545 mm) (Case- Ø D = 35 mm) 2700 45 x 100 x 100 45 x 100 DIMENSIONS in millimeters AND AVAILABLE FORMS PRINTED WIRING PRINTED WIRING 35 x 70 DIMENSIONS in 560 millimeters AND -AVAILABLE FORMS - 15-Aug-11 35 x 60 Revision: 1 40 x 60 PRINTED WIRING1 Fig. Number: 4 - Printed wiring Document pin versionNumber: 28392 DIMENSIONS in millimeters AND AVAILABLE FORMS Revision: 15-Aug-11 Document 28392 PRINTED WIRING Revision: Document Number: 28392 PRINTED WIRING For questions, 35 contact: 1 (Case Ø D = 40 mm) 35 x 50 35 x 60 15-Aug-11 35technical x 70 x 80 [email protected] 2.5 35 x 60 2.5 680 For technical questions, contact: [email protected] PRINTED WIRING 40 x 50 40THIS x 50DOCUMENT 40 50 40For x 50 40 contact: x [email protected] technical questions, IS xSUBJECT TO CHANGE WITHOUT NOTICE. PRODUCTS DESCRIBED HEREIN THIS DOCUMENT - 2.5 2.5 3 AND 2.5 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT 35 x 50 35 x 60 35 x 60 35 x 70 35 x 80 35 x 100 ARE TO SPECIFIC DISCLAIMERS, SETTHE FORTH AT www.vishay.com/doc?91000 FOUR TERMINAL SNAP-IN 2.5 THIS DOCUMENT IS SUBJECT SUBJECT TO CHANGE WITHOUT NOTICE. PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT 820 ØD ARE SUBJECT SET www.vishay.com/doc?91000 40 x 40 40 x 50 40 x 50 TO SPECIFIC 40DISCLAIMERS, xARE 60 +SUBJECT 40 FORTH x 60 AT DISCLAIMERS, 40 x 80 SET FORTH AT www.vishay.com/doc?91000 1 max. 2.5 TO SPECIFIC 2 4 35 x 70 35 x 100 35 x 60 35 x 70 35 x 80 40 x 100 20 ± 0.1 1000 40 x 60 240 x 70 60° 60° 2 40 x 50 40 x 60 40 x 60 45 x 70 Ø1D 45 x 50 45 x 60 3 - 2 1 3 - 1 1 2 4 2 3 - 5 3 2 096 PLL-4TSI 096 PLL-4TSI 096 PLL-4TSI 096 PLL-4TSI Vishay BCcomponents Vishay BCcomponents 096 PLL-4TSI Vishay BCcomponents 096 PLL-4T Vishay BCcompone Fi Vishay BCcomponents Vishay BCcomponents 1 4 2 Fig 5 3 1 4 1 1 2 1 5 3 5 3 - 3 3 - 1 2 3 - 2 3 2 - ØD ØD + 1 max. max. 35+x170 40 xØ60 D + 1 max. 35 x 80 40 x 70 L +x 60 L 45 5 max. 40 x 80 L 45 L +x 60 5 40max. x 100 L 454.9 x 70 CCA976-1 ± 0.2 45 x 100 35 x 80 40 x 70 2 ØD + 1 max. 1 2 12 1 2 1500 4 3 - 3 - 1200 ØD + 1 max. L+ 5 max. L+ 5 max. 40 x 80 45 x 60 3 2 1540 ± 0.1 x 70 1 -L 15 ± 0.1 35 x 80 15 ± 0.1 40 x 70 45 x 60 35 x 100 15 ± 0.1 40 x 80 45 x 70 40 x 100 45 x 80 3 Ø240 D x 80 + 1 max. D x 370Ø - L145 + 5 max. + 12 max. 3 140 x -100 3 40 x 100 1 15 ± 0.1 45 x 70 45 x 80 3 + 1 max. - 45 x 100 2 20 ± 0.1 Ø D15 ± 0.1 - 4 - 3 1 1.3 (5 x) 1 45 x 100 2 1 10 ± 0.1 L L + 5 max. + 1.3L + 5 max. L1.3 17.5 ± 0.1 1800 45L x 100 L 5 max. (4 x) (4 x) 20 ± 0.1 22.5 L Lmax. 1.3 5.1 ± 0.1 L+ 6.3 (5 ± 1x) 1.3 7.5 ± 0.1 1.3 7.5 ± 0.145 x 100 (4 x) 2200 100 45 x 100 - 1.3 4.9 405 xmax. (4 x) CCA976-1 ± 0.2 17.5 ± 0.1(4 x) Bottom view 1.3 17.5 ± 0.1 10 ± 0.1 7.5 ± 0.1 D 4.9 - (4 x) 2700 45 x 100 - 7.5 ± 0.1 Fig. version Fig. 5 - Mounting hole diagram viewed from component side 4.9 45 x 100 7.5 ± 0.14 - Printed wiring pinCCA976-1 ± 0.2 17.5 ± 0.1 CCA976-1 4.9 17.5 ± 0.1 5.1 ± 0.1 ± 0.2 17.5 ±viewed 0.1 (Case Øhole D = 40 mm) Ø D = 40 snap-in mm) Fig.(Case 6 - 4-Terminal Fig. 2 - Printed Fig. 3 - Mounting fromside component side 7.5from ± 0.1component 0.2wiring pin version 4.9 Fig. 2 -CCA976-1 Printed wiring pin±version Fig. 3 - Mounting hole diagram 17.5 ±viewed 0.1 diagram 20 ± 0.1 5.1 ± 0.1 ± 0.2 (Case = 35 mm) (Case Ø D = 3517.5 mm) Revision: (Case 15-Aug-11 Document 28392 Ø D = 35 mm)Ø DCCA976-1 (Case Ø D = 35 mm) ± 0.1 pinNumber: 1 Fig. 2 - Printed version side 3 - Mounting hole diagram viewed from component Fi si Fig. 2 - Printed wiring pin version Fig. 3 - Mounting hole diagram viewed wiring from component Fig. 4Fig. - Printed wiring pin version FOUR TERMINAL SNAP-IN Fig. 2 - Printed wiring pin version 3 - Mounting hole diagram viewed from(Case component side For technical questions,Fig. contact: [email protected] Ø D = 35 mm) (Case Øbe D =free 35 mm) Pin numbers 2, 3 and 4 (if present) should from the electrica L 40 x 100 45 x 70 40 x 100 45 x 80 (Case Ø D = 35 mm) Ø Dwiring = 35 pin mm) (Case Øhole D =diagram 40 mm) viewed from component side -(Case Printed Fig. 5 - Mounting Fig. 2 - Printed pin version Fig.DESCRIBED 3Fig. -DMounting diagramversion viewed from component side (Case Ø D = 35 IS mm) (Case Ø =4 35 mm)hole THIS DOCUMENT SUBJECT TOwiring CHANGE WITHOUT NOTICE. THE PRODUCTS THIS DOCUMENT (Case HEREIN Ø D(Case = 40AND mm) (Case D = 40 mm) (Case Ø DTO = 35 mm) Ø D = 35 mm) 60° B Ø60° ARE SUBJECT SPECIFIC DISCLAIMERS, 60°SET FORTH 60°AT www.vishay.com/doc?91000 FOUR TERMINAL SNAP-IN 2.5 2.5 1 1 FOUR TERMINAL SNAP-IN 4 4 2 5 3 Revision 15-Aug-11 2 20 ± 0.1 22.5 ØD + 1 max. 20 ± 0.1 Bottom view L L + 5 max. L + 5 max. L L + 5 max. L L + 5 max. L + 5 max. 5.1 ± 0.1 5.1 ± 0.1 5.1 ± 0.1 60° 4- 2 2 3 20 ± 0.1 3 4- 20 ±2 0.1 1 4 2Ø D 1 dummy ØD ØD + 13 max.- L4max. 2 A 2 2.5 dummy For technical questions, contact: aluminum C dummy 60° 60° TO CHANGE 60° WITHOUT NOTICE. THE PRO B THIS DOCUMENT IS SUBJECT 22.5 ± 0.1 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FOR 3 - 4 3 3 ØD + 1 max. FOUR TERMINAL SNAP-IN PRODUCT SHEET FOUR TERMINAL SNAP-IN 60° 60° 60° 60° FOUR TERMINAL SNAP-IN 60° 60° 3 5 1 5 5 L - 2 2 4 2 L 2.5 60°Ø D 3 60° 4 3 5 4 1 5 1 3 ØD + 1 max. ØD + 1 max. 60° 1 2 ØD + 1 max. Revision: 15-Aug-11 2.5 2.5 5.1 wiring ± 0.1 pin version Fig. 4 - Printed Fig. 4 - Printed wiring pin version 5.1 ± 0.1 (Case (Case Ø D = 40 mm)Ø D = 40 mm) Fig. 4 - Printed wiring pin version Fig. 4 - Printed wiring pin Ø version (Case D = 40 mm) FOUR TERMINAL SNAP-IN FOUR TERMINAL SNAP-IN Fig. 4 - Printed wiring pin version (Case Ø D = 40 mm) (Case Ø D = 40 mm) 60° Fig 1 CR VALUE (μF) 35 x 50 350 to 45 x 100 390 390 470μF to 2700 μF ± 20 % 560 350 V to 500 V - 680 40 °C to + 85 °C 2000 h 35 x 50 820 5000 h 40 x 40 200 000 h 35 x 60 1000 40 x 50 1000 h DESCRIPTION Nominal case size (D x L in mm) Rated capacitance range CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 85 °C Useful life at 85 °C Useful life at 40 °C, 1.4 x IR applied Shelf life at 0 V, 85 °C Based on sectional specification Climatic category IEC 60068 1 120 ± 0.1 1 Fig. 6 - 4-Terminal snap-in 22.5 Lmax. L + 5 max. L1.3 (5 x) 1.3 (5 x) 6.3 ± 1 A 3 dummy 2 6.3 ± 1 4 C 2 ± 0.1 (4 x) 20 ± 0.1 4 22.5 ± 0.1 2 ± 0.1 1 Dummy terminals (A and C) must be free from (4 thex)electrical circuit 22.5 Lmax. 6.3 ± 1 Fig. 7 - Mounting hole diagram Bottom view 10 ± 0.1 view4 1.3 (5 x) 10Bottom ±2,0.1 (5 x) the electrical circuit Pin numbers 3 and (if present) should be free1.3 from or connected to C) the minus Dummy terminals (A and must be freeterminal. from the electrical circuit Fig. 6 - 4-Terminal snap-in 17.5 ± 0.11.3 (5 x) 17.5 ± 0.1 10 ± 0.1 10 ± 0.1 6 - 4-Terminal 1.3 (5 x) Fig. 7 - Mounting hole diagram 20 ± 0.1 snap-in 20 ± Fig. 0.1 10 ± 0.1 17.5 ± 0.1 17.5 ± 0.1 17.5 ± 0.1 10 ± 0.1 Pin numbers 2, 3 and 4 (if present) should free from the 20be ± 0.1 20 ± 0.1 5.1 ± 0.1 2 Revision: 15-Aug-11 Document Number: 28392 17.5 ± 0.1 20 3 ± and 0.1 4 (if present) should be free from the electrical circuit or connected to the minus PinFig. numbers 2, terminal. 5 - Mounting hole diagram viewed from component side Fig. 5 - Mounting hole diagram viewed from component 20 ± 0.1 side For technical questions, contact: [email protected] 2/2 dummy ØD ØD electrica (Case Ø D = 40 mm) (Case Ø D = 40 mm) Fig.TO 4 -CHANGE Printed pin version Fig. 5 -HEREIN Mounting hole diagram viewed from component si Fig. 5 - Mounting hole diagram viewed wiring from component sideTHE PRODUCTS DESCRIBED THIS DOCUMENT IS SUBJECT WITHOUT NOTICE. AND THIS DOCUMENT Fig. 5 - Mounting hole diagram viewed side 15-Aug-11 (Case D = 40 mm) 2 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SETRevision: FORTH AT www.vishay.com/doc?91000 (Case Ø D = 40 mm) (Case from ØD =component 40 Ø mm) Fig. Ø 5 -DMounting (Case = 40 mm)hole diagram viewed from component side Revision: 15-Aug-11 Document Number: 28392 For technical questions, contact: aluminum 2 (Case Ø D = 40 mm) FOUR TERMINAL SNAP-IN For technical questions, contact:THIS [email protected] DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PR 60° 60° B ARE SUBJECT TO SPECIFIC B IS60° THIS60° DOCUMENT SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THISDISCLAIMERS, DOCUMENT SET FOR ARE TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 60° 60° B 60° 60° SUBJECT 60° 60°A B C60° B dummy C A 60° dummy VMN-PT0221-1204 dummy A 60° C 60° 60° 60° is subject to change without notice. THECPRODUCTS AB This document DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO A C ØD ØD dummy dummy dummy dummy 22.5 ± 0.1 A 22.5 ± 0.1 C dummy dummy SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ØD ØD D 2 ± dummy 0.1 (4 x) 2 ± 0.1 (4±x)0.1 22.5 dummy 22.5 ± 0.1 22.5 ± 0.1 2 ± 0.1