V ishay I n t e rt e ch n o l o g y, I n c . Capacitors - High Power Aluminum, Long Life I INNOVAT AND TEC O L OGY 104 PHL-ST N HN VISHAY BCcomponents O 19 62-2012 104 PHL-ST High Power, High Ripple Current, Long Life Aluminum Capacitors with Screw Terminals Key Benefits • • • • • • • • • Long lifetime: 5000 h at 105 °C High reliability High ripple current up to 35 A at 100 Hz, 105 °C Available with high capacitance/voltage combinations (33 000 μF, 200 V to 6800 μF, 450 V; both in 90 mm x 220 mm cases) Available with 8 mm, M5 terminals and 13 mm, M6 terminals Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated with a blue sleeve Also available in bolt version (104 PHL-STB) Pressure relief in the sealing APPLICATIONS • • • • • Motor control (power from mains): single phase and three phase Inverter (power to mains): solar/wind and fuel cell Back-up power supplies, UPS Traction (trains, subways) Pulsed power supplies for X-rays, plasma physics, welding, and other medical/ industrial applications Resources • Datasheet: 104 PHL-ST - http://www.vishay.com/doc?28389 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of RoHS Discrete Semiconductors and Passive Components COMPLIANT e3 PRODUCT SHEET 1/2 VMN-PT0253-1204 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Aluminum AluminumCapacitors Capacitors Aluminum Capacitors Power Power High HighRipple Ripple Current Current Long Long Life LifeScrew ScrewTerminals Terminals Power High Ripple Current Long Life Screw Terminals FEATURES V ishay I n t e rt e ch n o l o g y, I n c . FEATURES FEATURES I INNOVAT 104 PHL-ST O L OGY VISHAY BCcomponents HN AND TEC • Polarized • Polarized aluminum aluminumelectrolytic electrolyticcapacitors, capacitors, • Polarized aluminum electrolytic capacitors, N O non-solid non-solid electrolyte electrolyte non-solid electrolyte • Large •aluminum Largetypes, types, cylindrical cylindricalaluminum aluminumcase, case, • Large types, cylindrical case, insulated with with a blue a blue sleeve sleeve insulated with a blue sleeveinsulated • Also •(104 Also available available in bolt in bolt version version (104 (104 PHL-STB) PHL-STB) • Also available in bolt version PHL-STB) • Pressure • Pressure relief relief in the in the sealing sealing • Pressure relief in the sealing 19 • Long • Long useful useful lifelife 62-2012 • Long useful life • Compliant • 2002/95/EC Compliant to to RoHS RoHS Directive Directive 2002/95/EC 2002/95/EC • Compliant to RoHS Directive 104 PHL-ST Vishay BCcomponents 104 PHL-ST High Power, High Ripple Current, APPLICATIONS APPLICATIONS APPLICATIONS Long LifeAluminum Aluminum Capacitors with Screw Terminals Capacitors www.vishay.com 104 PHL-ST 104104 102 PHL-ST PHL-ST PHR-ST 85 °C • Telecom •temperature Telecom and and industrial, industrial, high high temperature temperature systems systems • Telecom and industrial, high systems 102102 • Smoothing and and filtering filtering • Smoothing and filtering • Smoothing PHR-ST PHR-ST • Standard • Standard and and switched switched mode mode power power supplies supplies • Standard and switched mode power supplies • Energy • Energy storage storage in pulse in pulse systems systems • Energy storage in pulse systems 85 85 °C °C Capacitors - High Power Aluminum, Long Life Power High Ripple Current Long Life Screw Terminals Fig.Fig. 1 1 Fig. 1 FEATURES MARKING QUICK QUICK REFERENCE DATA DATA •REFERENCE Polarized aluminum electrolytic capacitors, QUICK REFERENCE DATA MARKING MARKING The capacitors areare marked marked with with thethe following following information: information: The capacitors are marked The with thecapacitors following information: VALUE VALUE DESCRIPTION • Rated capacitance capacitance (in (in μF)μF) capacitance • Large types, cylindrical• Rated aluminum case, (in μF)• Rated Nominal Nominal case (Ø90 (Ø D xD220 LxinL mm) in mm) 35 35 x 60 x 60 to 90 to 90 x 220 x 220 Nominal case size (Ø D x L in mm) 35case xsize 60size to • Tolerance • Tolerance on rated rated capacitance, capacitance, code code letter letter in accordance in accordance insulated with a blue sleeve • Tolerance on rated capacitance, code on letter in accordance Rated Rated capacitance capacitance range range in bolt versionwith Rated capacitance range with IECIEC 60062 60062 (± 20 (± 20 %)%) 60062 (± 20 %) with • Also available (104 PHL-STB) 150150 μF μF toIEC 33 to 33 000 000 μF μF 150 μF to 33 000 μF (E6(E6 series), series), CR CR (E6 series), CR • Rated • Rated voltage voltage (in (in V) V) • Rated voltage (in V) • Pressure relief in the sealing ± 20 ± 20 %% Tolerance Tolerance on on CR±C20 Tolerance on CR R % • Date • Date code code (YYMM) (YYMM) • Date code (YYMM) • Long useful life 200 V toVof 450 tomanufacturer 450 V V Rated Rated voltage voltage range, range, U U V to 450 VR RoHS Directive Rated voltage range, UR R to • Name • Name of of manufacturer manufacturer •200 Name • 200 Compliant 2002/95/EC • Code forfor factory factory of of origin origin Category temperature temperature range range -• 40 - 40 °C °C tofor 105 to factory 105 °C °C of origin • Code Code Category temperature range Category - 40 °C to 105 °C APPLICATIONS • “-” • “-” sign sign to to identify identify thefrom the negative negative terminal, visible visible from from thethe • “-”2000 sign terminal, visible the terminal, Endurance Endurance testtest at 105 at 105 2000 htohidentify the negative Endurance test at 105 °C 2000 h°C °C toptop and and side side of of thethe capacitor capacitor • Telecom and industrial, hightop temperature systems and Useful Useful lifelife at 105 at 105 °C °Ch 5000 5000 hside h of the capacitor Useful life at 102 105 °C 5000 • Code • Code number number • Smoothing and filtering • Code number 85 °C Shelf Shelf lifelife at 0atV,0 105 V, 105 °C 1000 1000 h h Shelf life atPHR-ST 0 V, 105 °C 1000 h °C • Climatic • Climatic category in accordance in accordance with with IECIEC 60068 60068 • Standard and switched mode power category supplies in accordance • Climatic withcategory IEC 60068 Based Based on on sectional sectional specification specification IEC IEC 60384-4/EN130300 60384-4/EN130300 Based on sectional specification IEC 60384-4/EN130300 Fig. 1 • “LL” forfor long long lifelife grade grade • Energy storage in pulse systems • “LL” for long life grade • “LL” non-solid electrolyte DESCRIPTION DESCRIPTION VALUE 104 PHL-ST Climatic Climatic category category IECIEC 60068 60068 40/105/56 Climatic category IEC 60068 DESCRIPTION 40/105/56 40/105/56 MARKING QUICK REFERENCE DATA The capacitors are marked with the following information: VALUE SELECTION SELECTION CHART CHART FOR FOR ,NOMINAL , RU, RAND , AND RELEVANT RELEVANT NOMINAL NOMINAL CASE SIZES SIZES (Ø(Ø D xD Lx in L in mm) mm) SELECTION CHART FOR CR, •URated RELEVANT CASE SIZES (Ø D x L inCASE mm) RC RU capacitance (inCμF) R, AND Nominal case size (Ø D x L in mm) 35 x 60 to 90 x 220 CR (μF) 150 μF to 33 000 μF Rated capacitance range (E6 series), CR 150 200 URcode (V) letter in accordance URU(V) R (V) on rated capacitance, CR•CTolerance R (μF) (μF) with IEC 60062 20 %) 200 200 250250 350350 250 (± 350 400 •150 Rated voltage (in V) 150 - -www.vishay.com - -www.vishay.com - 400400 PHL-ST 450450 104 PHL104 450 - - - 35 x 60 35 35 x 60 x 60 Vishay BCcompone - - Vishay BCcomponents • Date code (YYMM) - - x 60 x 60 35 35 x 80 x 80 35 x 60 - 35 x 8035 35 200 V to 450 V • Name of manufacturer 330330 - x 60 x 60 x 80 x 80 35 35 x 105 x 105 330 35 x 60 - 35 x 8035 35 35 x 10535 35 SELECTION CHART FOR C , U , AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) • Code for factory of origin - 40 °C to 105 °C R R SELECTION CHART RELEVANT -NOMINAL CASE D x L 35 in xmm) 470470 FOR CR-, UR, -AND xSIZES 80 x 80 (Ø 50 80 x 80 50 50 x 80 x 80 470 35 x 80 35 xthe 8035 35 x 80 35 • “-” sign to identify from UR (V) 2000 h CR the negative terminal, visible UR (V) CR 35 x 60 35 35 x 60 x 60 x 60 x 60 x 105 x 105 x 80 x 80 50 50 x 105 x 105 top and side of the capacitor 35 x 60 35 x 10535 35 50 x 8035 35 50 x 10550 50 (μF) 200 250 350 400 450 5000 h (μF) 680680 200 680 250 350 400 450 • Code number x 60 x 60 x 80 x 80 x 80 x 80 50 50 x 105 x 105 50 50 x 105 x 105 35 x 60 35 x 8035 35 50 x 8035 35 50 x 10550 50 50 x 105 50 x 105 65 x 105 76 x 146 76 x 220 1000 h 50 x 105 65 x 105 with IEC 6006876 x 146 76 x 220 • Climatic category in accordance 4700 35 35 x 80 x 80 35 35 x 105 x 105 65 65 x 105 x 105 35 x 105 65 x 105 4700 35 x 80 65 x 105 76 x 105 76 x 146 90 x 146 IEC 1000 1000 100060384-4/EN130300 65 xfor 105 76 x 105 76 x 146 90 x 146 • “LL” long life35grade 35 x 80 x 80 - - - - - Tolerance on CR ± 20 % 220 Rated voltage range, UR Category temperature range Endurance test at 105 °C Useful life at 105 °C Shelf life at 0 V, 105 °C Based on sectional specification 220220 - 104 PHL-ST 104 PHL-ST Vishay BCcomponents Vishay BCcomponents -65 x 105 -76 x 105 -76 x 146 76 x 220 90 x 220 65 x 105 76 x 105 76 x 146 76 x 220 90 x 220 6800 35 35 x 80 x 80 35 x 105 x 105 50 x 105 x 105 50 x 105 x 105 65 x 105 x 105 35 x 105 50 x76 105 50 x76 105 65 x 105 x35105 x50146 - 50 90 x65146 76 x 146 90 x 146 35 35 x 105 x 105 50 50 x 80 x 80 65 65 x 105 x 105 76 76 x 105 x 105 35 x 105 50 x 80 -76 x 105 65 x76 105 76 x76 105 x 146 x 220 90 x 220 76 x 105CASE 76 (Ø x 146 76 x 220 90 x 220 10 000SIZES SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL D x L in mm) 10 000 x 105 x 105 50 x 80 x 80 65 x 105 x 105 65 x 105 x 105 76 x 105 x 105 35 x 105 50 x 8035 35 65 x76 105 65 x 105 76 x90 105 x50 146 - 65 x65146 - 76 76 x 146 90 x 146 2200 2200U 2200 R (V) CR 50 D 50 x 80 80in 35 x 105 x 105SIZES 76 x 105 x 105 76 x 146 x 146 76 x35146 xD220 90 x76220 - 76 CHARTNOMINAL FOR UR,76AND CASE (Ø x- L- in mm) SELECTION CHART FOR CR, URSELECTION , AND RELEVANT (Ø xx L 50 x 80CR, CASE 35RELEVANT x 105 76 x76 105 x SIZES 146 76NOMINAL xmm) 220 90 x 220 - 76 x 146 15 000 (μF) 200 250000 350 400 15 - 50 x 146 - 76 - 76 x 80 x 80 x 105 x 105450 - 76 x 105 x 105 76 x 146 x 146 UR-(V)50 50 xU80 50 x 10550 50 76 x90 105 76 x 146 R (V) CR CR 90 x 146 3300 3300 3300 150 35 x 60 (μF)250 (μF) x65220 x 220 - 76 - - 50 50 x 105 x 105 65 x 105 x 105 - x 146 x 146 450 200 350 400 450 50200 x 105 65250 x 105 -76 x90 146 - 76 76 x 220 90 x 220 350 - 76400 22 000 22 000 220 35 x 60 35 x 80 146 50 x 105 65 x 105 x 146 76 50 x 105 65 76 x 105 -90xx220 90 x 146 - 76 x 146 - 76 x 220 4700 4700 Revision: Revision: 03-Nov-11 03-Nov-11 Document Document Number: 28389 28389 Revision: 03-Nov-11 Document Number: 33 000 90 x 220 35 x 105 - 28389 -Number: 330 35 135 x -8076 90 33- 000 90xx60 220 - 1 1- 90 x 146 65 x 105 76 x 105 x 146 x 146 65 76 x 105 76 x 105 x 146 For For technical questions, questions, contact: [email protected] For technical questions, contact: 470 - 65 76 35 x 80 [email protected] xtechnical 80 50 xcontact: [email protected] 65 x 105 76 x 105 x 146 x 220 x 220 x 105 76 76 x 105 76 90 x 146 x 220 90 x 220 THIS THIS DOCUMENT DOCUMENT IS SUBJECT IS SUBJECT TOTO CHANGE CHANGE WITHOUT WITHOUT NOTICE. NOTICE. THE THE PRODUCTS PRODUCTS DESCRIBED DESCRIBED HEREIN HEREIN AND AND THIS THIS DOCUMENT DOCUMENT 6800 6800 THIS DOCUMENT35 ISxSUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT 35 x 60 6076 x 105 35 x DIMENSIONS 105 50 xTO 80 50AVAILABLE x 10590 76 x 105 76 x 146 90 x 146 76 x 146 x 146 in millimeters AND FORMS ARE ARE SUBJECT SUBJECT TO SPECIFIC SPECIFIC DISCLAIMERS, DISCLAIMERS, SET SET FORTH FORTH AT AT www.vishay.com/doc?91000 www.vishay.com/doc?91000 ARE SUBJECT TO SPECIFICAND DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 680 DIMENSIONS in millimeters AVAILABLE FORMS 35 x 60 76 x 146 35 x 8076 76 50 x 8076 90 50 x 10576 x 220 50 x 10590 x 220 76 x 105 x 220 x 220 x 105 x 146 10 000 10 000 Lt 35 x 80 35 x 10576 90 - 90 x 146 65 x 105 Lt76 x 146 x 146 x 146 - L Safety 1000 Thread M x S Mb L Thread MxS Mb 76 x 146 x 220 - Vent x 146 76 x 220 90 x 220 35 x 80 76 x 220 - 76 90 - Safety Vent 15 000 15 000 lb lb 35 x 80 90 x 146 35 x 105 - 50 x 10590 x 146 50 dx1105 - 65 x 105 - d1 D 1500 D P 76 x 220 x 220 90 x 220 - A- D 35 x 1052290 50 x 8076 x 220 76 xD105 P 65 x 105 A22 000 000 B90 x 146 90 x 146 B x 105 35 x 105 50 x 80 65 x 105 65 76 x 105 2200 33 000 90 x 220 33 00090 x 220 - - 50 x 80 35 x 105 76 x 105 76 x 146 H Climatic category IEC 60068 40/105/56 www.vishay.com 35 x 80 6800 35 x 80 150076 x 105 www.vishay.com 1500 Revision 03-Nov-11 1500 50 x 80 3300 50 x 105 H - T 76 x 105 T 76 x 146 2 A: Standard M5 disc: Screw terminal (ST) and screw terminal bolt nut (STB) DIMENSIONS in millimeters AND 50 AVAILABLE FORMS DIMENSIONS in millimeters AND AVAILABLE FORMS x 105 65 x 105 76 x Screw 146 Fig. - screw Fig.-2 A: Standard M5 disc: terminal (ST) and terminal bolt nut (STB) L Revision: 03-Nov-11 L t t Document Number: 28389 1 L L Safety Thread M x S Mb Lt Safety Thread MM x bS For technical questions, contact: Vent [email protected] Safety Thread M x S Vent L Vent lb d DESCRIBED HEREIN AND THIS DOCUMENT lb THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS d1 1 D D d1 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Safety Vent Lt Thread M x S P A A D B H P B d1 B H T D P B H T B D Mb Mb L lb lb P D B H D D T T Fig. 2 A: Standard M5 disc: Screw terminal (ST) terminal bolt nut (STB) Fig.screw 2 B: High current M6 Screw terminal (ST) and screw terminal bolt nut (STB) Fig. and 2 A:screw Standard disc: terminal (ST)Screw and terminal boltscrew nutdisc: (STB) Fig.M5 2 B: HighScrew current M6 disc: terminal (ST) and terminal bolt nut (STB) Safety Vent Thread M x S d1 B Note NoteL Lt t •x SMaximum permissible torque which may be applied to the termination screws: 2 Nm for M5; 2.5 Nm for M6 Safety Mb be applied Thread M Mb for • Maximum torque which may termination screws: 2 Nm M5; 2.5 Nm for M6 L permissible L to the Vent For accessories refer to datasheet “Mounting Accessories”. For accessories refer to datasheet “Mounting Accessories”. lb capacitors are delivered with screws andlb washers. The The capacitors are delivered with screws and washers. d P B D B H 1 P D D D B T H T Fig. 2 B: High current M6 disc: Screw terminal (ST) and screw terminal bolt nut (STB) Fig. 2 B: High current M6 disc: Screw terminal (ST) and screw terminal bolt nut (STB) PRODUCT SHEET 2/2 Note Note • Maximum permissible torque which may •be Maximum applied to permissible the termination screws: Nm for 2.5 Nm fortermination M6 torque which2 may be M5; applied to the screws: 2 Nm for M5; 2.5 Nm for M6 For accessories refer to datasheet “MountingFor Accessories”. accessories refer to datasheet “Mounting Accessories”. The capacitors are delivered with screws washers. The capacitors delivered with screws and washers. THE PRODUCTS DESCRIBED HEREIN This document is and subject toare change without notice. SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-PT0253-1204 AND THIS DOCUMENT ARE SUBJECT TO