Cartridge Fuse Holders Enclosed Fuseholders > Panel Mounted 286/346 Series Flip-Top Shock-Safe Panel Mount Fuse Holders RoHS Pb Product Characteristics Compatible Fuses For 3AG, 3AB, 5×20mm, or 2AG Fuses Features FUSE CARRIER HOLDS SPARE FUSE LOW PROFILE DESIGN BARRIER-PROTECTED TERMINALS Agency Approvals Agency Agency File Number E14721 7316 * Ensure that proper fuse re-rating is factored in fuseholder selection. • Shock-Safe design eliminates any possibility of electrical shock, per IEC Standards IEC 60127-6. • Fuse carrier holds spare fuse for fast, easy fuse replacement and convenient servicing. • Low profile design Electrical Rating: See TABLE. Insulation Resistance:10,000 megohm minimum at 500 VDC. Contact Resistance: Less than 0.01 ohm. Mounting Snap-in mounting. No hardware required. Panel thickness range: .032” through .125”. Molded Parts Thermoplastic (UL94 V-0) black standard (other colors available as special). Fuse Carrier Spring-loaded. Unlocks with a press of the finger. Locks into place to prevent accidental circuit interruption. Permanently attached to fuseholder body to prevent loss. Extracts fuse from live terminals. Holds spare fuse. Terminals Copper alloy, tin plate. Accepts quick-connect or solder. Ambient Temperature –40ºC to +85ºC. Vibration 10-55-10 Hz at .06” double amplitude (Method 201, MIL-STD-202). Dimensions Additional Information A B D C Datasheet 286 Series Resources 286 Series Samples 286 Series Datasheet 346 Series Resources 346 Series Samples 346 Series Recomended Mounting Hole E F Ordering Information Catalog Number Fuse Size 346 877 3AG 286 677 5 × 20mm 286 377 2AG Q.C. Terminals .250” × .032” .072” Dia. Hole .187” × .032” .055” Dia. Hole .110” × .020” .048” Dia. Hole Max. Amps At 250V. A B C D E +.005”/-.000” F +.005”/-.000” 15 .75” 1.5” .27” 1.04” .688” 1.445” 10 .70” 1.03” .26” .94” .625” .953” 10 .61” .85” .20” .87” .550” .775” © 2015 Littelfuse, Inc. Specifications are subject to change without notice. Application testing is strongly recommended. Revised: 06/03/15