HOT FEED Information on New Products from Cole Hersee Company Blocks for Plug-in Fuses & Circuit Breakers • Accepts standard two-blade ATC or ATO fuses or circuit breakers 6V - 32V DC. • Contacts are recessed for safety. • Standard 1/4" snap-on quick connect automotive style terminals. With Common Hot Feed & Common Ground Terminal bus With Common Hot Feed only COMMON HOT FEED ONLY: COMMON HOT FEED & COMMON GROUND: Part No. 46377-6 46377-8 46377-10 46377-12 46377-14 46377-18 Part No. 46379-6 46379-8 46379-10 46379-12* 46379-14* 46379-18* Positions 6 8 10 12 14 18 Length 2.47" (62.73mm) 3.09" (78.48mm) 3.72" (94.48mm) 4.34" (110.23mm) 4.97" (126.23mm) 6.22" (157.98mm) Positions 6 8 10 12 14 18 Length 3.77" (95.75mm) 4.39" (111.50mm) 5.02" (127.50mm) 5.64" (143.25mm) 6.27" (159.25mm) 7.52" (191.00mm) 25A maximum per circuit, 150A total. Recessed area in the middle of the block accepts a label for ready identification of circuits. Width: 3.375" (85.72mm) Height: 0.812" (20.62mm). Hot feed: 10-32 stud. Ground feed: 10-32 stud and .250" blades. Mounting: accepts four No.10 screws. * Available by special order. Cole Hersee Plug-in Fuses & Circuit Breakers Type I and Type II For a wide range of other Cole Hersee Fuses and Circuit Breakers, request Hot Feed D-581 Type III ATC98108 series Fuses ATC/ATO Circuit Breakers 30147 Universal In-line Fuse Holder Available in 5A, 10A, 15A, 20A, 25A, 30A and 40A. Part number ATC98108-5 etc. 30409, 30411 and 30413 series. Available in 10A, 15A, 20A, 25A and 30A. To specify amperage in part number add suffix -10, -20 etc. Easy to install, easy to change fuse or breaker. Accepts ATC/ATO fuses and breakers from 3A to 20A (not supplied). 16AWG insulated copper leads, 4.0" long (101.6mm). Brass electrical contacts. Cole Hersee Co. 20 Old Colony Avenue, Boston, MA USA 02127-2467 • (617) 268-2100 • Fax (617) 268-9490 See our interactive product catalog at www.colehersee.com All specifications and information is subject to change without notice. © Copyright Cole Hersee Co. D•601 Rev 01