A high output power CW magnetron that delivers 100 kW minimum continuous output power at typical 88% efficient operation. Features • 896, 915, 922 and 929 MHz • CW Power Output - 100 kW* • 88% efficiency, typical • Water-cooled anode • Coaxial launch into WR-975 • External electromagnet Characteristics: Frequency of Operation (fixed) 896, 915, 922, 929 MHz Frequency Variation ± 10 MHz Continuous CW Power Output* 100 kW (min) Anode Voltage 19.5 - 20 kV Anode Current 5.8 - 6.0 A Efficiency 83 - 88 % Filament Voltage (standby) 12.0 - 12.6 V Filament Current (standby) (see chart) 112 - 115 A Load VSWR (circulator required) 1.1:1 cooling requirements: Cooling (water flow, anode min) Cooling (air flow, cathode min.) Cooling (air flow, dome min) 4 gpm 5 cfm 40 cfm MECHANICAL: RF Launch Type Weight (max.) Overall Dimensions: Length Diameter Coaxial, into WR-975 15 lbs (6.8 Kg) 18.00 Inches 4.94 Inches * For operation of 100 kW magnetrons at power levels below 50 kW, contact Econco for operating instructions. The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI Econco for use in equipment design. For information on this and other CPI Econco products, visit our website at: www.cpii.com, or contact: CPI Econco, 1318 Commerce Avenue, Woodland, CA 95776 telephone: 1(800) 532-6626 fax : (530) 666-7760 | email : [email protected] CPI | 4CW50,000J ECONCO 100 K W L-BAND CW MAGNETRON 100kW L-Band CW Magnetron