612 SERIES PANEL INDICATOR LED Marl Part Number LED Colour 612-301-04 612-325-04 612-324-04 612-330-04 612-934-04 612-998-04 612-301-20 612-325-20 612-324-20 612-330-20 612-934-20 612-998-20 612-301-21 612-325-21 612-324-21 612-330-21 612-934-21 612-998-21 612-301-23 612-325-23 612-324-23 612-330-23 612-934-23 612-998-23 612-301-24 612-325-24 612-324-24 612-330-24 612-934-24 612-998-24 Red Yellow Green Red/Green Bi-Colour Blue Cool White Red Yellow Green Red/Green Bi-Colour Blue Cool White Red Yellow Green Red/Green Bi-Colour Blue Cool White Red Yellow Green Red/Green Bi-Colour Blue Cool White Red Yellow Green Red/Green Bi-Colour Blue Cool White FEATURES BENEFITS • • • • • • • • • • • • • • • • Ø6.35mm mounting Black anodised aluminium housing Sealed to IP67 - weatherproof Wide viewing angle - smoked lens Internal potting Range of LED colour options Range of voltage options Standard industrial mounting size Suitable for portable equipment Suitable for external applications Smoked lens gives good on/off contrast ratio Suitable for high vibration applications Suitable for status panel indication Manufactured with internal resistor Outstanding reliability Vandal resistant Typical Voltage DC Vopr Typical Current DC Iopr Typical LED Luminous Intensity Typical LED Wavelength λd Operating Temp Topr * Storage Temp Tstg 1.85 ** 2.0 ** 3.2 ** 2.0/2.2 ** 3.2 ** 3.2 ** 5-6 5-6 5-6 5-6 5-6 5-6 12 12 12 12 12 12 24-28 24-28 24-28 24-28 24-28 24-28 48 48 48 48 48 48 Vdc 20 20 20 20 20 20 19 18 16 20 20 16 18 18 19 20 19 18 17 @ 28V 17 @ 28V 16 @ 28V 17 @ 28V 14 @ 28V 14 @ 28V 12 12 12 12 10 12 mA 33 401 1010 20 225 1194 33 401 830 20 225 932 33 401 1010 20 225 1194 27 308 830 20 @ 20mA 175 932 18 208 615 20 @ 20mA 125 648 mcd 640 590 525 625/568 469 See Below 640 590 525 625/568 469 See Below 640 590 525 625/568 469 See Below 640 590 525 625/568 469 See Below 640 590 525 625/568 469 See Below nm -40 to +85 -40 to +85 -30 to +85 -40 to +85 -30 to +85 -30 to +85 -40 to +85 -40 to +85 -30 to +85 -40 to +85 -30 to +85 -30 to +85 -40 to +85 -40 to +85 -30 to +85 -40 to +85 -30 to +85 -30 to +85 -40 to +85 -40 to +85 -30 to +85 -40 to +85 -30 to +85 -30 to +85 -40 to +85 -40 to +85 -30 to +85 -40 to +85 -30 to +85 -30 to +85 °C -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 -40 to +85 °C Typical Emission Colours Cool White LED X 0.296 0.283 0.330 0.330 Y 0.276 0.305 0.360 0.318 OPTIONAL FLYING LEAD TERMINATORS Marl Part No Suffix Wire Length Wire Colour No/Diameter of Conductors Diameter of Insulation Wire Specification 612-301-04-15 150mm 612-301-04-19 1000mm Red - Anode Black - Cathode 19/0.16mm 1.2mm Type 44, 22 Gauge High Performance Wire NOTES Intensities (lv) and colour shades of white (X-Y co-ordinates) may vary between LEDs within a batch. Additional LED Colours, Voltage Options and Flying Lead lengths available for semicustom projects. Please contact our Sales Team. All LED components are supplied in anti-static packaging. * LED Characteristics stated at Ta = 25°C. For operating temperature derating graphs, please refer to sheet 2. ** These are Current models and the voltage shown is Vf at 20mA, not Vopr. Additionally, there is no reverse protection diode in Current models. To order please contact us on +44 (0) 1229 582 430 F +44 (0) 1229 585 155 | E [email protected] | www.leds.co.uk marlleds marlinternationallimited company/marl-international-limited Q 05480 DSN 612 Version 2015-10-01-133500. Page 1 of 2 612 SERIES PANEL INDICATOR LED TECHNICAL CHARACTERISTICS Series Max. Power Dissipation Max. Reverse Voltage Panel Cutout Nut Mounting Torque Min. Mounting Centres Min. - Max. Panel Thickness 612 500 3*/75^ 6.35 0.6 11.0 1.5 - 7.0 mW Vdc mm Nm mm mm * = Current version ^ = Voltage version TECHNICAL DRAWING Weight (g): 5 Dimensions in mm (typical). Not to scale. Mounting hole to be clean and burr free. Anode termination denoted by long pin. 6.35 2.54 10 + 0.1 0 PUSH ON CONNECTOR 11.8 9 5.1 15 0.65 Sq 2.5 909-000-00 is gold plated, 910-000-00 is tin plated - for use with 612 series lamps. Dimensions in mm (typical). Not to scale. Mounting Hole 30 20 30 20 10 10 0 40 20 40 60 80 Ambient Temperature Ta (°C) 100 0 Cool White LED 40 30 20 10 8.5 0 50 Forward Current If (mA) 40 Blue / Green LED 50 Forward Current If (mA) Red / Yellow LED 50 Forward Current If (mA) Forward Current If (mA) DE-RATING GRAPHS 20 40 60 80 Ambient Temperature Ta (°C) 100 0 0 Red+Green Bi-Colour LED 40 30 R 20 G 10 8.5 0 50 20 40 60 80 Ambient Temperature Ta (°C) 100 0 0 7.5 5 20 40 60 80 100 Ambient Temperature Ta (°C) MATERIALS Body Nut Panel Seal Lens Encapsulation Lock Washer Termination Black Anodised Aluminium Nickel Plated Brass Viton Polycarbonate Black Polyurethane Spring Steel Silver Flash Coated Brass DESIGN CONSIDERATIONS Electro-Static Discharge (ESD) Build up of electro-static discharge occurs in many situations involving people moving and handling products.The range of possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and despatch. Marl recommend all users of LED based products follow the guidelines of BS 100015. it is operated. Therefore, care must be taken to operate the LED at the correct voltage / current values, depending upon the ambient temperature. Marl should be contacted if the device is to be operated outside the temperature range specified. Marl accept no liability for any product that is operated outside the stated voltage or temperature range. Voltage, Current and Temperature The forward voltage / current value of an LED is dependent upon the ambient temperature of the environment in which To order please contact us on +44 (0) 1229 582 430 F +44 (0) 1229 585 155 | E [email protected] | www.leds.co.uk marlleds marlinternationallimited company/marl-international-limited Q 05480 DSN 612 Version 2015-10-01-133500. Page 2 of 2