PSAZC SERIES 2 Watt, AC/DC PCB Mount Power Supplies Rev B FEATURES RoHS Compliant 3.3V, 5V, 12V, 15V, and 24V Single Output Models Isolation Class II PCB Mountable Switching Power Supply 3000VAC I/O Isolation -40°C to +80°C Operating Temperature Range 2 Watts Output Power Universal Input Voltage Range: 90-305VAC (120- Fully Encapsulated Plastic Case < 0.3W No Load Input Power 430VDC) Short Circuit and Over Voltage Protection UL/cUL, CE, and CB Safety Approvals (Pending) DESCRIPTION Size: 1.12 x 1.02 x 0.67 inches 28.5 x 25.8 x 17.0 mm The PSAZC series of AC/DC power supplies provides 2 watts of output power in a 1.12” x 1.02” x 0.67” encapsulated PCB mountable package. This series consists of 3.3,V 5V, 12V, 15V, and 24V single output models with a universal input range of 90-305VAC (120-430VDC). Some features include 3000VAC I/O isolation, -40°C to +80°C operating temperature range, and over power and short circuit protection. All models are RoHS compliant and have UL/cUL, CE, and CB (pending) safety approvals. MODEL SELECTION TABLE Efficiency Maximum Capacitive Load Output Current Model Number Input Voltage PSAZC-3.3S PSAZC-5S Output Voltage Ripple & Noise Output Power Min Load Max Load 3.3 VDC 0% 600mA 300mVp-p 2W 66% 7000µF 5 VDC 0% 400mA 300mVp-p 2W 70% 4000µF PSAZC-9S 90~305 VAC 9 VDC 0% 222mA 300mVp-p 2W 73% 1200µF PSAZC-12S (120~430 VDC) 12 VDC 0% 167mA 300mVp-p 2W 73% 500µF PSAZC-15S 15 VDC 0% 133mA 300mVp-p 2W 73% 350µF PSAZC-24S 24 VDC 0% 83mA 300mVp-p 2W 75% 110µF DERATING 07/27/2015 BLOCK DIAGRAM Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797website: www.wallindustries.com • e-mail: [email protected] Page 1 of 3 PSAZC SERIES 2 Watt, AC/DC PCB Mount Power Supplies Rev B SPECIFICATIONS: PSAZC SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS AC input voltage range DC input voltage range Input Voltage 90 120 47 Input Frequency Input Current Inrush Current (<2ms) At 115VAC and full load At 230VAC and full load At 115VAC and cold start At 230VAC and cold start No Load Input Power External Fuse (recommended) External Varistor 305 VAC 430 VDC 63 Hz 75 mA 55 30 A 50 0.3 W 3.15A slow blow type 10S471K OUTPUT SPECIFICATIONS Output Voltage Voltage Accuracy Line Regulation Load Regulation Output Power Output Current Minimum Load Ripple & Noise (20MHz BW) Max Capacitive Load Hold-up Time Temperature Coefficient -6 -5 -6 Low Line to High Line 10% - 100% full load See Table +6 +5 +6 See Table See Table % % % 0 Measured with 0.1µF and 47µF capacitors in parallel At 100~240VAC At 230VAC % mVp-p 300 See Table 15 -0.02 ms %/°C +0.02 PROTECTION Hiccup mode, indefinite (autorecovery) Hiccup technique, auto-recovery Short Circuit Protection Over Power Protection GENERAL SPECIFICATIONS Efficiency Isolation Voltage Leakage Current At 230VAC Input to Output < 240VAC See Table 3000 VAC mA 0.25 ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Humidity Cooling MTBF With derating (see derating curve) 25°C (MIL-HDBK-217F) -40 -40 +80 +85 95 Free air convection 350,000 °C °C % RH hours PHYSICAL SPECIFICATIONS Weight Case Material Dimensions (L x W x H) TBD Plastic resin with fiberglass (Flammability to UL 94V-0) 1.12 x 1.02 x 0.67 inches (28.5 x 25.8 x 17.0 mm) SAFETY & EMC Safety Approvals EMC 07/27/2015 EMI (Conducted and Radiated Emissions) EMS (Noise Immunity) UL/cUL, CE, CB EN 55022 class B EN 55024 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797website: www.wallindustries.com • e-mail: [email protected] Page 2 of 3 Rev B PSAZC SERIES 2 Watt, AC/DC PCB Mount Power Supplies MECHANICAL DRAWING PIN # 1 2 3 4 5 Single +DC OUT -DC OUT AC IN (N) AC IN (L) NC COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 07/27/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. • 5 Watson Brook Road, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797website: www.wallindustries.com • e-mail: [email protected] Page 3 of 3