Download Data Sheet

PSATC SERIES
10 Watt AC/DC Encapsulated PCB Mount Power
Supplies
Rev H
FEATURES
• RoHS Compliant
• PCB Mountable Switching Power Supplies
• 10 Watts Output Power
• -25°C to +70°C Operating Temperature Range
• Low Ripple and Noise
• Optional -40°C~+70°C Operating Temperature Range
• Single and Dual Outputs
• Universal Input Voltage Range: 90-264VAC (120-370VDC)
• UL/cUL and CE Approvals
• Short Circuit, Over Power, and Over Voltage Protection
• Fully Encapsulated Plastic Case • Screw Terminal Mechanical Options Available
DESCRIPTION
The PSATC series of AC/DC switching power supplies provides 10 watts of output power in a
2.52” x 1.77” x 0.85” encapsulated PCB mountable package. This series consists of single and
dual output models with a universal input range of 90-264VAC (120-370VDC). Some features
include low ripple and noise, -25°C to +70°C operating temperature range, and over power, over
Size:
Weight:
2.52 x 1.77 x 0.85 inches 3.25oz (92g) voltage, and short circuit protection. The PSATC series also has two types of screw terminal
mechanical options and an extended operating temperature option available. All models are RoHS
64.0 x 45.0 x 21.5 mm
compliant and have UL/cUL and CE safety approvals.
MODEL SELECTION TABLE
SINGLE OUTPUT MODELS
Model Number Input Voltage
PSATC-3.3S
PSATC-5S
PSATC-12S
PSATC-15S
PSATC-24S
90~264 VAC
(120~370
VDC)
Output Current
Output
Line
Load Regulation Output
Efficiency
Voltage Min Load(1) Max Load Regulation
(5% - 100%)
Power
3.3 VDC
4%
3000mA
±0.5%
±1%
10W
65%
5 VDC
5%
2000mA
±0.5%
±1%
10W
71%
12 VDC
5%
833mA
±0.5%
±1%
10W
76%
15 VDC
3%
666mA
±0.5%
±1%
10W
75%
24 VDC
5%
426mA
±0.5%
±1%
10W
75%
Maximum
Capacitive Load
70,000µF
35,000μF
11,000μF
7000μF
2300μF
DUAL OUTPUT MODELS
Model Number Input Voltage
PSATC-5D
PSATC-12D
PSATC-15D
90~264 VAC
(120~370
VDC)
Output Current
Output
Line
Load Regulation Output
Efficiency
Voltage Min Load(1) Max Load Regulation
(5% - 100%)
Power
±5 VDC
1%
±800mA
±0.5%
±1%
8W
73%
±12 VDC
3%
±380mA
±0.5%
±1%
10W
75%
±15 VDC
1%
±300mA
±0.5%
±1%
10W
74%
Maximum
Capacitive Load
±22,000µF
±3000µF
±2000µF
NOTES
1. Some models require a minimum loading on the output to maintain specified regulations. Operation under no-load conditions will
not damage these devices; however, they may not meet all listed specifications.
2. For -40°C to +70°C extended operating temperature range please add the suffix –E1 to the model number (Ex: PSATC-12S-E1).
3. Screw terminal mechanical options available (see page 4). Please call factory for ordering details.
Due to advances in technology, specifications subject to change without notice.
MODEL NUMBER SET
PSATC
Series Name
-
12
S
Output Voltage
Output Quantity
3.3: 3.3 VDC
S: Single Output
5: 5 VDC
12: 12 VDC
15: 15 VDC
24: 24 VDC
5: ±5 VDC
12: ±12 VDC
15: ±15 VDC
09/03/2013
-
E1
A2
Operating Temperature Options
Screw Terminal Options
-25°C to +70°C Operating
Temp.
-40°C to +70°C Operating
E1:
Temp.
None:
None:
Encapsulated PCB
Mount
A2: See page 4
A5: See page 4
D: Dual Output
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797
website: www.wallindustries.com • e-mail: [email protected]
Page 1 of 5
PSATC SERIES
10 Watt AC/DC Encapsulated PCB Mount Power
Supplies
Rev H
TECHNICAL SPECIFICATIONS: PSATC SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
AC input voltage range
DC input voltage range
Input Voltage
90
120
47
Input Frequency
At 115VAC and full load
At 230VAC and full load
Input Current
Standard Models
Inrush Current (<2ms)
“-E1” Suffix Models
At 115VAC
At 230VAC
At 115VAC
At 230VAC
External Fuse (recommended)
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
Low Line to High Line
Load Regulation
5% to 100% load
Output Power
Output Current
Minimum Load
Ripple
Measured at 20MHz BW and with a 47µF tantalum capacitor
Ripple & Noise
and a 0.1µF ceramic capacitor in parallel across the output.
Noise
Maximum Capacitive Load
Hold-Up Time
Temperature Coefficient
PROTECTION
Short Circuit Protection
Over Voltage Protection
Over Power Protection
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Input to Output
Isolation Voltage Input to FG
Output to FG
Leakage Current
ENVIRONMENTAL SPECIFICATIONS
Standard Models
Operating Temperature
“-E1” Suffix Models
Storage Temperature
Humidity
Cooling
MTBF
25°C (MIL-HDBK-217F)
PHYSICAL SPECIFICATIONS
Weight
With Baseplate
Case Material
Dimensions (L x W x H)
SAFETY & EMC
Safety Approvals
EMC
09/03/2013
EMI (Conducted and Radiated Emissions)
EMS (Noise Immunity)
264
370
440
200
130
10
20
23
46
1.5A slow blow type
See Table
+2
+0.5
+1
10
See Table
See Table
< 0.2% Vout +40mV max.
< 0.5% Vout +50mV max.
See Table
15
±0.02
-2
-0.5
-1
VAC
VDC
Hz
mA
A
A
%
%
%
W
Vp-p
ms
%/°C
Hiccup mode, indefinite (auto-recovery)
Zener diode clamp
Hiccup technique, auto-recovery
See Table
100
3000
1500
500
VAC
0.75
-25
-40
-40
KHz
+70
+70
+85
95
Free air convection
250,000
mA
°C
°C
% RH
hours
3.25oz (92g)
6.17oz (175g)
Plastic resin with fiberglass (Flammability to UL 94V-0)
2.52 x 1.77 x 0.85 inches (64.0 x 45.0 x 21.5 mm)
UL/cUL, CE
EN 55022 Class B
EN 50082-1
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797
website: www.wallindustries.com • e-mail: [email protected]
Page 2 of 5
Rev H
PSATC SERIES
10 Watt AC/DC Encapsulated PCB Mount Power
Supplies
DERATING CURVES
Standard Models
“-E1” Suffix Models
BLOCK DIAGRAMS
Single Output
Dual Output
MECHANICAL DRAWING
09/03/2013
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797
website: www.wallindustries.com • e-mail: [email protected]
Page 3 of 5
Rev H
PSATC SERIES
10 Watt AC/DC Encapsulated PCB Mount Power
Supplies
SCREW TERMINAL OPTIONS
PSATC-A2
PIN
1
2
3
4
5
6
7
8
PIN CONNECTIONS
SINGLE
DUAL
FG
FG
AC IN (N)
AC IN (N)
AC IN (L)
AC IN (L)
NO
NO
CONNECT
CONNECT
-DC OUT
-DC OUT
NO
COMMON
CONNECT
+DC OUT
+DC OUT
NO
NO
CONNECT
CONNECT
PSATC-A5
PIN
1
2
3
4
5
6
7
8
09/03/2013
PIN CONNECTIONS
SINGLE
DUAL
FG
FG
AC IN (N)
AC IN (N)
AC IN (L)
AC IN (L)
NO
NO
CONNECT
CONNECT
-DC OUT
-DC OUT
NO
COMMON
CONNECT
+DC OUT
+DC OUT
NO
NO
CONNECT
CONNECT
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797
website: www.wallindustries.com • e-mail: [email protected]
Page 4 of 5
Rev H
PSATC SERIES
10 Watt AC/DC Encapsulated PCB Mount Power
Supplies
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
E-mail:
Web:
Address:
09/03/2013
(603)778-2300
(888)597-9255
(603)778-9797
[email protected]
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-7789797
website: www.wallindustries.com • e-mail: [email protected]
Page 5 of 5