DATASHEET Rev. B PSDRHF150 SERIES 85~132 or 170~264VAC Input Voltage Range Up to 152 Watts Output Power 12, 13.8, 15, 24, & 48VDC Single Outputs DIN Rail AC/DC Switching Power Supplies FEATURES RoHS Compliant ±10% Voltage Adjustment Range Single Outputs High Reliability, Compact Design Short Circuit, Over Current, Over Voltage Protection Up to 152W Output Power 85~132 or 170~264VAC Input Voltage Ranges Available UL60950, UL508, EN60950, and CE Approvals (Selectable by Jumper which is set at Factory) Installed on DIN Rail TS35/7.5 or 15 DESCRIPTION The PSDRHF150 series of DIN rail AC/DC power supplies offers up to 152W of output power in a 4.27” x 3.29” x 4.29” package. This series consists of 12, 13.8, 15, 24, and 48VDC single output models with an input voltage range of 85~132VAC or 170~264VAC (selectable by jumper which is set at factory). These supplies have a ±10% output adjustment range and are protected against short circuit, over current, and over voltage conditions. This series is RoHS compliant and has UL60950, UL508, EN60950, and CE approvals. 07/10/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 4 PSDRHF150 Series Up to 152 Watts Single Outputs, DIN Rail AC/DC Switching Power Supplies Rev. B SPECIFICATIONS: PSDRHF150 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT SPECIFICATIONS TEST CONDITIONS Input Voltage Ranges Selectable by jumper which is set at factory Inrush Current Input Frequency OUTPUT SPECIFICATIONS Output Voltage Output Voltage Adjustment Range Line Regulation Load Regulation Output Current Output Power Ripple & Noise Rise Time Hold-up Time PROTECTION Over Current Protection Over Voltage Protection Short Circuit Protection GENERAL SPECIFICATIONS Efficiency Cold start; 230VAC Nom 85 170 Max Unit 132 264 VAC 40 47 -10 -0.5 Full load Full load Full load Delay shutdown 63 A Hz See Table +10 +0.5 0.5 See Table See Table See Table 50 20 ms ms 130 150 % % 110 115 % % % Yes See Table Input to Output Withstand Voltage Input to FG Output to FG Leakage Current At 230VAC ENVIRONMENTAL SPECIFICATIONS Operating Temperature Operating Humidity non-condensing Storage Temperature Storage Humidity non-condensing Cooling Method PHYSICAL SPECIFICATIONS All for 1 minute 3000 1500 500 VAC 0.7 -10 20 -20 20 mA +50 °C 93 % RH +85 °C 95 % RH Free air convection 7.83 x 4.33 x 1.97 inches (199 x 110 x 50 mm) 3P/6.35mm pitch 4P/6.35mm pitch, terminal block Dimensions (L x W x H) Connection SAFETY & EMC CHARACTERISTICS Safety Standards EMC Standards 07/10/2012 Min UL508, UL60950, EN60950 EN55022 Class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 4 PSDRHF150 Series Up to 152 Watts Single Outputs, DIN Rail AC/DC Switching Power Supplies Rev. B MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage Output Current Ripple & Noise Output Power Efficiency 12 VDC 12.5 A 120mVp-p 150W 82% 13.8 VDC 11.0 A 150mVp-p 151.8W 83% 15 VDC 10.0 A 150mVp-p 150W 83% PSDRHF150W-24A 24 VDC 6.3 A 150mVp-p 151.2W 85% PSDRHF150W-48A 48 VDC 3.1 A 200mVp-p 148.8W 86% PSDRHF150W-12B 12 VDC 12.5 A 120mVp-p 150W 82% 13.8 VDC 11.0 A 150mVp-p 151.8W 83% 15 VDC 10.0 A 150mVp-p 150W 83% PSDRHF150W-24B 24 VDC 6.3 A 150mVp-p 151.2W 85% PSDRHF150W-48B 48 VDC 3.1 A 200mVp-p 148.8W 86% PSDRHF150W-12A PSDRHF150W-13.8A PSDRHF150W-15A 85 ~ 132 VAC PSDRHF150W-13.8B PSDRHF150W-15B 170 ~ 264 VAC MECHANICAL DRAWING Unit: inches (mm) 4.29 (109) 4.27 (108.4) 07/10/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 3.29 (83.6) Page 3 of 4 Rev. B PSDRHF150 Series Up to 152 Watts Single Outputs, DIN Rail AC/DC Switching Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 07/10/2012 (603)778-2300 (888)587-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 4