DATASHEET Rev. A PSHF100W SERIES 85~132 / 170~264VAC Input Selectable by Switch Up to 108 Watts Output Power 5, 7.5, 12, 13.8, 15, 24, & 48VDC Single Outputs AC/DC Switching Power Supplies FEATURES RoHS Compliant 7.83” x 3.86” x 1.54” Enclosed Case ±10% Voltage Adjustment Range 100W Output Power Free Air Convection 100% Full Load Burn-in Tested 85~132/170~264VAC Input Selectable by Switch Short Circuit, Over Current, Over Voltage Protection High Reliability UL, ETS/LVD/EMC, and CE Approvals Single Outputs DESCRIPTION The PSHF100W series of AC/DC power supplies offers up to 108W of output power in a 7.83” x 3.86” x 1.54” enclosed case. This series consists of 5, 7.5, 12, 13.8, 15, 24, and 48VDC single output models with an input voltage range of 85~132 / 170~264VAC selectable by switch. These supplies have a ±10% output adjustment range and are protected against short circuit, over current, and over voltage conditions. This series is RoHS compliant and has UL, ETS/LVD/EMC, and CE approvals. 01/04/2012 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 1 of 4 PSHF100W Series Single Outputs Up to 108 Watts AC/DC Switching Power Supplies Rev. A SPECIFICATIONS: PSHF100W SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION INPUT SPECIFICATIONS Input Voltage Range Inrush Current Input Frequency OUTPUT SPECIFICATIONS Output Voltage Output Voltage Adjustment Range Line Regulation Load Regulation Output Current Output Power Ripple & Noise Rise Time Hold-up Time PROTECTION Over Current Protection Over Voltage Protection Short Circuit Protection GENERAL SPECIFICATIONS Efficiency TEST CONDITIONS Selected by switch At 115VAC At 230VAC Cold start Nom Max Unit 85~132 / 170~264VAC 20 A 40 47 63 Hz -10 -0.5 Full load Full load Full load See Table +10 +0.5 0.5 See Table See Table See Table 50 20 ms ms 130 150 % % 110 115 % % % Yes See Table Input to Output Withstand Voltage Input to FG Output to FG Leakage Current At 230VAC ENVIRONMENTAL SPECIFICATIONS Operating Temperature Operating Humidity non-condensing Storage Temperature Storage Humidity non-condensing Cooling Method PHYSICAL SPECIFICATIONS Weight All for 1 minute Dimensions (L x W x H) SAFETY & EMC CHARACTERISTICS Safety Standards EMC Standards 01/04/2012 Min 3000 1500 500 VAC 0.7 -10 20 -20 20 mA +50 °C 93 % RH +85 °C 95 % RH Free air convection 1.4 lbs (650g) 7.83 x 3.86 x 1.54 inches (199 x 98 x 39 mm) UL60950, EN60950, GB4943 GB9254, EN55022 Class B, EN55024, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 2 of 4 PSHF100W Series Single Outputs Up to 108 Watts AC/DC Switching Power Supplies Rev. A MODEL SELECTION TABLE Model Number Input Voltage Range Output Voltage Output Current Ripple & Noise Output Power Efficiency 5 VDC 20.0A 100mVp-p 100W 77% 7.5 VDC 13.5 A 100mVp-p 101W 78% 12 VDC 8.5A 100mVp-p 102W 82% 13.8 VDC 7.5 A 100mVp-p 103.5W 82% PSHF100W-SF-15 15 VDC 6.7A 100mVp-p 100.5W 82% PSHF100W-SF-24 24 VDC 4.5A 100mVp-p 108W 82% PSHF100W-SF-48 48 VDC 2.2A 150mVp-p 105.6W 82% PSHF100W-SF-5 PSHF100W-SF-7.5 PSHF100W-SF-12 PSHF100W-SF-13.8 85~132 / 170~264 VAC (selectable by switch) MECHANICAL DRAWING Unit: inches (mm) 0.26 (6.5) 7.48 (190) 1.13 (28.7) 3 - M3 0.14 (3.5) 0.40 (10.2) 0.71 (18) 0.78 (19.7) 1.13 (28.7) 1.54 (39) Ø0.14 (Ø3.5) 6.18 (157) 0.87 (22) 7.83 (199) 0.18 (4.5) 6 - M3 Ø0.14 (Ø3.5) 2.44 (62) 01/04/2012 3.86 (98) 3.15 (80) 3.37 (85.5) 0.14 (3.5) 0.35 (9) 0.28 (7) 7.58 (192.5) 4.72 (120) Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 0.24 (6) Page 3 of 4 Rev. A PSHF100W Series Single Outputs Up to 108 Watts AC/DC Switching Power Supplies COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 01/04/2012 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 5 Watson Brook Rd. Exeter, NH 03833 Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 Page 4 of 4