Options Specifications Replacement lamp NP25LP (for PH1400U) PH1400U PH1000U Projector type 3 chip DLP DLP size HD/SD-SDI board 3G/HD/SD-SDI Board NP03FT SB-01HC SB-04HC 0.96 inches (Aspect ratio 16:10) 1 Resolution* 1920 x 1200 pixels Lens NP02LM1 / NP02LM2 / NP02LM3 Vertical : Max -0.4 to +0.55 Model name of the optional wireless LAN unit varies depending on the country where the unit is used (or to be used). NP02LM1 : United States, Canada, Mexico, Taiwan, Brazil, Colombia NP02LM2 : Europe, United Arab Emirates, Saudi Arabia, Oman, South Africa, Turkey, Ukraine, Egypt, Israel, Australia, New Zealand, Japan, Thailand, China, Hong Kong, Singapore, South Korea, Sri Lanka, Pakistan, Vietnam, India, Indonesia, Philippines, Peru, Chile, Argentina, Ecuador NP02LM3 : Russia Horizontal : Max ±0.2 (NP26ZL, NP27ZL, NP28ZL, NP29ZL, NP32ZL) Lamp (Eco mode on / Eco mode off) Lamp life*3 (Eco mode on / Eco mode off) 360 W / 465 W AC 320 W / 400 W AC 3000 H / 2500 H 2500 H / 2000 H Image size (Projection distance) See the chart of Lens specifications shown on below Colour reproduction 10-bit signal processing (1.07 billion colours) (VIEWER, NETWORK : 16.7 million colours) Light output* * Eco mode off (with NP27ZL) Eco mode on 13500 ANSI lumens 11000 ANSI lumens Approx. 75 % of Eco mode off Contrast ratio (white / black)*5 2000:1 (with dynamic contrast on) Maximum resolution WUXGA (1920 x 1200) Keystone correction Horizontal 15 kHz to 108 kHz (RGB : 24 kHz or over) conforms to the VESA standard Vertical 48 Hz to 120 Hz (HDMI : 50 Hz to 85 Hz) conforms to the VESA standard Manual Approx. ±35 degrees Max Horizontal Vertical Input terminals 2 x Mini D-Sub 15 pin (1&2 IN), 1 x 5 BNC (3 IN) HDMI PH1400U / PH1000U Cabinet dimensions Manual Approx. ±30 degrees Max Computer/Component 39.5 Unit : mm 1 x HDMI Type A 1 x DisplayPort DisplayPort 1 x Mini Din 4 pin S-Video 499 578 653 Scan rate 1 x BNC Video Output terminal Produce images of up to 800 inches with high brightness of 13500 lumens and WUXGA resolution *1 Mini D-Sub 15 pin (only computer 1 input can be output) USB port 1 x Type A (for mouse, keyboard, USB memory) Wireless LAN (USB Port) 1 x Type A Wired LAN Port 1 x RJ-45 (10BASE-T / 100BASE-TX) 1 x Stereo Mini Jack Remote 1 x D-sub 9 pin PC control Operational temperatures 558 0 - 40 °C ([ECO MODE] is set automatically to [ON] at 35 - 40 °C), Lens centre 119.9 20 - 80 % Humidity (non-condensing) Power requirement -10 - 60 °C, 20 - 80 % Humidity (non-condensing) Power consumption (100 - 130 V AC / 200 - 240 V AC) Standby Mode Lens centre 200 - 240 V AC, 50/60 Hz 100 - 240 V AC, 50/60 Hz 6.2 A 11.2 A (100-130 V) / 5.4 A (200-240 V) Input current Eco mode off dual (Single) 1215 W (705 W) Eco mode on dual (Single) 985 W (585 W) 155.3 Storage temperatures 235 Environment 1100 W / 1050 W (600 W / 580 W) 880 W / 840 W (500 W / 490 W) Normal 90 W Network standby 60 W 480 283.7 Control terminal Installation Projector (included accessory) 430 4 5 Remote control Wireless LAN unit See the chart of Throw Distance and Screen Size shown on below 2 628 *2 *1 PH1400U with NP32ZL *2 PH1400U with NP27ZL 48.7 Lens shift* / NP22LP (for PH1000U) Replacement filter 0.5 W Power-saving Calorific value MAX: 4146 BTU Net dimensions (W x H x D) Lens shift range MAX: 3754 BU 447 x 235 x 578 mm (not include protrusions) Gross dimensions (W x H x D) *Shift range will vary depending on the lens you use. 700 x 333 x 653 mm (with rigger) Width of projected image Desk/front projection Weight (Not including lens) 39.5 kg Gross weight 50.5 kg Accessories Power cord, Remote control, Batteries, CD-ROM (User's set manual), 0.55V Quick setup guide, Important information, 1V Anti-theft cap for LAN unit, Power cord stopper Regulations For United States UL Approved (UL 60950-1), Meets FCC Class A Requirements For Canada C-UL Approved (CSA 60950-1), Meets DOC Canada Class A Requirements For Europe Meets EMC Directive (EN55022 Class A, EN55024, EN61000-3-2, EN61000-3-3), 0.4V meets Low Voltage Directive (EN60950-1, TÜV GS approved) Height of projected image 0.2H 1H 0.2H 0.2H 1H 0.2H IEC60950-1, Meets AS/NZS CISPR.22 Class A For Asia/Oceania For Korea KC (safety : K60950-1, EMC : K00022, K00024, K61000-3-2) For China GB4943, GB9254, GB17625.1 For Russia Gost R 60950-1, 51318.22, 51317.3.2./3.3. Ceiling/front projection 0.4V SASO IEC60950-1 For Saudi Arabia 1V *1 : Effective pixels are more than 99.99 % *2 : The Lens Shift function is not available for the NP25FL. 0.55V *3 : Lamp life is defined as the average time span for the brightness of the lamp to be reduced by half.It does not refer to the warranty period for the lamp. *4 : This is the light output value (ANSI lumens) when the [PRESET] mode is set to [HIGH-BRIGHT] If any other mode is selected as the [PRESET] mode, Height of projected image the light output value may drop slightly. *5 : Compliance with ISO21118-2005 All specifications are subject to change without notice. Lens specifications NP25FL Throw Distance and Screen Size (Aspect ratio 16:10) NP32ZL NP26ZL NP27ZL NP28ZL NP29ZL Option Lens Fixed Short Throw Lens Lens Type Zoom Lens Zoom/Focus Manual focus Zoom Ratio Throw Ratio F f (mm) Screen Size (inches) − 0.67 : 1 2.5 14.6 80-200 1.2 0.9-1.1 : 1 2.5-2.7 19.4-23.3 40-800 12640 lm 10300 lm 0 13000 lm 10600 lm -0.4 V to +0.5 V Light Output Lens Shift Weight PH1400U PH1000U Vertical Horizontal 0 6.5 kg Width of projected image Powered zoom and focus 1.3 1.6 1.39 -1.87 : 1 1.87-2.56 : 1 2.56-4.16 : 1 4.16-6.96 : 1 2.5 28.8-38.9 39.0-53.4 52.4-85.3 84.9-142.0 100-500 13000 lm 10600 lm 13500 lm 12390 lm 11000 lm 10100 lm -0.4 V to +0.55 V ±0.2 H 4.5 kg 6.0 kg · The projector can be unplugged during its cool down period after it is turned off. Parts of the projector will become heated during operation. Use caution when picking up the projector immediately after it has been operating. · Use caution when putting the projector in the soft case immediately after the projector has been operating. The projector cabinet is hot. 5.0 kg 12020 lm 9800 lm Unit : m Lens model name Screen size (inches) NP25FL NP32ZL NP26ZL NP27ZL NP28ZL NP29ZL 40" — 0.7-0.9 — — — — 60" — 1.1-1.4 — — — — 80" 1.1 1.5-1.9 — — — — 100" 1.4 1.9-2.3 2.9-4.0 4.0-5.5 9.0 12.0-15.0 120" 1.7 2.3-2.8 3.5-4.8 4.8-6.6 9.0-10.8 12.0-18.0 150" 2.2 2.9-3.5 4.4-6.0 6.0-8.2 9.0-13.5 13.5-22.4 200" 3.0 3.9-4.7 5.9-8.0 8.0-11.0 11.1-17.9 17.9-29.8 240" — 4.7-5.7 7.1-9.6 9.6-13.2 13.3-21.4 21.4-35.7 300" — 5.9-7.1 8.9-12.0 12.1-16.6 16.5-26.8 26.7-44.5 400" — 7.9-9.5 11.9-16.1 16.1-22.1 22.0-35.6 35.5-59.3 500" — 9.9-12.0 14.9-20.1 20.2-24.0 27.4-44.5 44.3-74.0 600" — 11.9-14.4 — — — — 800" — 15.9-19.2 — — — — DLP and the DLP logo are registered trademark or trademark of Texas Instruments. HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. DisplayPort and DisplayPort Certified Logo are trademarks of the Video Electronics Standards Association registered in the U.S. and other countries. Microsoft,Windows7, Windows Vista, Windows XP are registered trademarks or trademarks of Microsoft Corporation. Trademark PJLink is a trademark applied for trademark rights in Japan and other countries. All other trademarks are the property of their respective owners. The images in this brochure are samples. Cat.No.WDPJ-1307-524N http://www.nec-display.com/ap/ Installation model meets the requirement for large screens in exhibitions and large venues with easily adjustable stacking function as well as high brightness and high image quality. Multi screen function allowing near seamless joins between screens Achieves High Brightness and High Image Quality *1 This method requires a high degree of installation precision and an appropriate graphics board that support edge blending is required. There are two methods to do this. One method involves no limit on the number Projection of large images with a high brightness of 13500 lumens*1 When you need higher brightness, up to 54000 lumens *2 can be achieved by stacking projectors and using multi screen tool *3. *1 With PH1400U. In case of PH1000U 11000 lumens. *2 When using four projectors and the value is with PH1400U. With PH1000U, the value is 44000 lumens. *3 The software is downloadable at http://www.nec-display.com/ap/ 3-chip DLP system for high image quality To produce high quality images, a 3 chip DLP system is used. This Cinema quality video using Hollywood Quality Video processing HD-like vivid and crisp DVD images can be projected through of the projectors that can be used and that there is no limit to the display resolution. Manual edge blending is a standard function of the projector.*1 Another method, easy installation than the first method can also be used. It *2 *2 The software is downloadable at http://www.nec-display.com/ap/ Hollywood Quality Video which excels at following points and enrich uses the detection of image distortion by use of a web camera and software , Blending area your cinematic experience. whereby the software will automatically perform the distortion correction. No resolution limitation ・Random and Mosquito ・Detail Enhancement Noise Reduction ・Full 10-bit Processing, Scaling and Warping ・Video and Film Cadence Detection (3:2 and 2:2 pull down) ・Per-pixel Motion Adaptive De-interlacing system produces lifelike image tones. The rich colour gradation 3 : 2 Pull down Detection reproduction improves the initial picture quality. Diagonal Interpolation to remove “jaggies” Utilises a high resolution WUXGA panel that enables the reproduction of even high-quality full HD content in its original beauty. Easy Installation Expandability for future-proofing your investment Professional 3D capability* Wide range of input/output terminals such as HDMI and DisplayPort The projector provides 3D images to users wearing commercially available LCD shutter eyeglasses. WUXGA (1920×1200) panel compatible with full HD displays Blending area Compatible with PJLink and AMX beacon *Only for PH1400U. The input signal is 1920 x 1080 at 120Hz Left and Right eye Interleaving (Frame sequential method) PC Control Utility Pro4 (for Windows) / 5 (for Mac) is compatible with Windows 7/Vista/XP NVIDIA®3D VisionTM Pro supported* *The software is downloadable from our website The projector allows you to view 3D images by using with supported New installation features graphics board or software. *Only for PH1400U. Compatible with wired / wireless LANs (optional) Dual lamp can support 24/7 operation Supports dual layers stacking Stacking to two layers can be facilitated by using the supplied columns. In this case, 27000 lumens* of high brightness projection is available. Lens memory function can adjust image to a preset memorized position using the inbuilt signal table even if the signal input changes * With PH1400U. In case of PH1000U 22000 lumens. Stacking column Stacking column Upper projector The stacking columns can facilitate not only vertical but also horizontal projection angle adjustment. Creston RoomView supported Terminals (The panel is illuminated by LEDs) Seamless switching When the input is switched, the image displayed before switching is DisplayPort IN held so that you can see smooth image changing without black image. HDMI IN COMPUTER 2 IN VIDEO IN LAN Port COMPUTER 1 IN To tilt the upper projector horizontally, use the lower projector’s horizontal adjustment knob. Lower projector OPS-compliant SBCs and HD/SD-SDI board supported USB Port SYNC (BNC) IN STEREO DVI SYNC (BNC) OUT S-VIDEO IN Terminal of 3D for PH1400U Geometric correction* This feature adjusts the image when projecting onto specially PC CONTROL REMOTE COMPUTER 3 IN MONITOR OUT shaped screen as below to expand your installation options. *The software is downloadable at http://www.nec-display.com/dl/en/pj_soft/eula/index_gct4.html Optional Slot Terminals Controls Example of installing NP27ZL *Stacking Columns of PH1400U are detachable. Six types of lenses available to suit the projection distance Six types of lenses are available, from short focal types to long focul types. Since it accommodates screen sizes from 40 to 800 inches, Spherical Surface Vertical Convex Cylindrical Surface Horizontal Convex Cylindrical Surface Horizontal Concave Cylindrical Surface which gives the installation more flexiblity. *The lenses are not included with this unit. Lens shutter that lets you blank the projected image when necessary Vertical Concave Cylindrical Surface PH1400U 13500ANSI lumens WUXGA 39.5kg Not including lens PH1000U 11000 ANSI lumens WUXGA 39.5kg Not including lens ( ) ( )