Specifications Remote control NP-PH1202HL Method (Included accessory) 3 chip DMD reflection type Specifications of main parts Size Main panel 3 × 0.65" 1080p (aspect ratio: 16:9) Pixels * 1 2,073,600 (1,920 dots × 1,080 lines) Zoom Projection lenses Power-adjustable (range depends on lens) Focus Power-adjustable Lens shifting Light source Blue laser diode Normal mode Light source (laser diode) Life * 2 ECO1 / ECO2 / Longlife 27,000 H / 40,000 H / 30,000 H 5 piece prism Light output * 3 * 4 Normal mode 12,000 lm ECO1 / ECO2 / Longlife Approx. 80 % / 50 % / 90 % Contrast ratio * 4 (all white / all black) Options 10,000:1 with dynamic contrast Screen size See option lens specifications Colour reproducibility Lenses 10-bit colour processing (approx. 1.07 billion colours) Quietness (ECO2 / ECO1 / Normal mode / Longlife) Horizontal Scan rate 43 dB / 45 dB / 47 dB / 55 dB Analogue: 15 kHz, 24 to 100 kHz (24 kHz or greater for RGB inputs), conforms to VESA standards Digital: 15 kHz, 24 to 153 kHz, conforming to VESA standards Vertical Max. display resolution (horizontal × vertical) Analogue: 48 Hz, 50 to 85 Hz, 100, 120 Hz conforming to VESA standards Digital: 24, 25, 30, 48 Hz, 50 to 85 Hz, 100, 120 Hz conforming to VESA standards Analogue: 1,920 × 1,200 (with Advanced AccuBlend) / Digital: 4,096 × 2,160 (with Advanced AccuBlend) Computer / component Mini D-Sub 15-pin × 1, 5BNC × 1 HDMI ® input terminals TypeA 19-pin HDMI® connector with HDCP × 1 HDMI ® output terminal TypeA 19-pin HDMI® connector with HDCP × 1 HDBaseT TM NP-9LS08ZM1 NP-9LS12ZM1 NP-9LS13ZM1 NP-9LS16ZM1 NP-9LS20ZM1 NP-9LS40ZM1 RJ45 × 1 (IEEE 802.3 / 802.3u 10BASE-T / 100BASE-TX), shared with Ethernet DisplayPort TM Boards DisplayPort 20-pin connector × 1 BNC (CV) BNC × 1 (shared with computer 5BNC) BNC (Y/C) BNC × 2 (shared with computer 5BNC) PC control connector D-Sub 9-pin × 1 GPIO D-sub 37-pin female × 1 USB port USB type A × 1 Ethernet port RJ-45 × 1, (supports 100BASE-TX, shared with HDBaseT) Remote connector Stereo mini jack × 1 3D SYNC output terminal 5 V / 10 mA, synchronized signal output for 3D use Option slot OPS type × 1 Usage environment 3G/HD/SD-SDI: SB-04HC HD/SD-SDI: SB-01HC Operating temperature: 5 to 40 °C *5, operating humidity: 20 to 80 % (with no condensation) Storage temperature: -10 to 50 °C, storage humidity: 20 to 80 % (with no condensation) Operating altitude: 0 to 2,600 m Power supply Power consumption PH1202HL 20,000 H Optical unit Input / output connectors Installation Projector Power-adjustable (range depends on lens) OPS single board controller (computer) 200 to 240 V AC, 50/60 Hz Normal 1,392 W ECO1 1,110 W ECO2 752 W Longlife 1,291 W Standby (Normal) 1.83 W Standby (HDBaseT) 5.7 W Rated input current 9.2 A Dimensions (W × H × D) 680 × 333 × 860 mm (net dimensions, not including protruding parts) Weight 68.0 kg (net weight, not including lens) N8000-8865 / N8000-8866 N8000-8830 / N8000-8822 *1: Effective pixels are more than 99.99 %. *2: Time at which the laser light source is at half brightness; not a guaranteed time. *3: Light output value when the [PRESET] mode is set to [HIGH-BRIGHT] and the [LIGHT MODE ADJUST] is set to [100] while using the NP-9LS12ZM1 or NP9LS16ZM1. *4: Compliant with ISO21118-2005. These specifications and the product’s design are subject to change without notice. Cabinet dimensions Lens specifications 1081 744 928.5 860 Model name 164.5 333 382 Unit: mm NP-9LS13ZM1 NP-9LS16ZM1 NP-9LS20ZM1 NP-9LS40ZM1 Zoom Zoom Zoom Zoom Zoom Zoom Zoom / Focus Power Power Power Power Power Power 1.56 F (Wide-tele) 680 NP-9LS12ZM1 Lens type Zoom ratio Lens centre NP-9LS08ZM1 f 1.5 1.43 1.58 1.67 1.87 2.5 - 3.0 2.5 2.5 2.5 2.5 2.5 13.3 - 19.9 mm 18.6 - 26.7 mm 20.7 - 32.7 mm 25.2 - 42.0 mm 32.2 - 60.3 mm 62.1 - 97.8 mm 4.31- 6.77 0.90 - 1.35 1.27 - 1.82 1.41 - 2.23 1.71‐ 2 .87 2.25 - 4.18 Screen size 70 - 600 100 - 500 100 - 500 100 - 500 100 - 500 60 - 500 Brightness 11,000 lm 12,000 im 11,700 lm 12,000 lm 11,800 lm 12,300 lm 2.25kg 2.36kg 2.34kg 2.36kg 2.28kg 1.7kg Throw ratio (1080p) Weight 45.2 566 · This product is equipped with a laser module. This product is classified as Class 1 of IEC60825-1 Third edition 2014. · When turning on the projector, make sure no one within projection range is looking at the lens. Do not look into the lens while the projector is on. · Please read the user's manual carefully before using the projector and keep the manual handy for future reference. NaViSet is a trademark or registered trademark of NEC Display Solutions, Ltd. in Japan, the United States and other countries. DLP and the DLP logo are registered trademarks or trademarks of Texas Instruments. Microsoft is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. DisplayPort and the DisplayPort Compliance Logo are trademarks owned by the Video Electronics Standards Association in the United States and other countries. HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. CRESTRON and CRESTRON ROOMVIEW are trademarks or registered trademarks of Crestron Electronics, Inc. AMX is a trademark or registered trademark of AMX in the United States and other countries. PJLink trademark is a trademark under application for trademark rights in Japan, the United States of America and other countries and areas. VESA is a trademark of a nonprofit organization, Video Electronics Standard Association All other trademarks are the property of their respective owners. The images in this brochure are samples. All rights reserved. All specifications are subject to change without notice. May 2015 Cat.No. WDPJ-1505-0021N http://www.nec-display.com/ap/ A bright 3-chip DLP laser installation projector delivering all the benefits associated with the latest laser light source technology. The PH1202HL presents super dust protection and professional installation features for superior projection performance. Fantastic cinema quality picture Equipped with NEC’s NV1301 4,096 × 2,160 scaler chip and the 3rd-generation contrast enhancement circuit This 10-bit video processor represents an enormous leap in video processing, with true flagship performance in noise reduction, de-interlacing and scaling. Advanced installation capabilities High brightness and outstanding images Tilt-free and portrait installation support 4K Ultra HD support (4,096 × 2,160 / 3,840 × 2,160) 12-bit gamma correction Advanced colour correction (6-axis saturation and hue adjustment / skin tone) Video and film cadence detection (multi-cadence) Per-pixel motion adaptive de-interlacing Detail enhancement Super resolution correction (3rd-generation contrast enhancement) 3D random, mosquito and block noise reduction Compatible with diverse signal sources The projector realizes a brightness of 12,000 lumens through use of The projector can be rotated freely a high-brightness laser light source, so vivid images are projected (360 ° ) to point up or down depending in large spaces such as halls and auditoriums. Furthermore, use of on the installation requirements and a Full-HD (1,920 × 1,080 pixels) 3-chip DLP® that allocates a single can be rotated (along with the screen Simplify your installations with HDBaseT, which is optimized for video The slot technology allows for the integration of Open Pluggable if necessary) to a vertical alignment so applications and supports uncompressed Full HD digital video, audio, Specification (OPS*) boards and other option slot products without projection that greatly surpasses that of 1-chip types. In addition, that portrait content can be viewed Ethernet, and various control signals. With only a single cable (up to the need to store additional external equipment. This offers the greater a unique high resolution function, 3rd generation contrast without black bars on the sides when 100 m) to run, infrastructure and labor costs are reduced, installations flexibility customers require. landscape mode is used. are significantly easier, and there is no cable clutter to manage. *OPS is a standard established by Intel Corporation. ® DLP chip to each RGB color realizes high-resolution, largescreen enhancement, increases the sense of contrast of the border areas of Built-in HDBaseT support Expansion Slot With uncompressed HD video support, images have never been images to realize more more stunning. What’s more, control signals are contained in vivid and sharper image Built-in edge blending projection. Terminals the same cable. Service This function seamlessly The 3rd generation contrast enhancement function increases the sense of contrast. PC control Wide selection of inputs and outputs such as HDMI and DisplayPort high-resolution image. USB Port HDBaseT / Ethernet (RJ-45) BNC IN connect HDMI, DisplayPort, computer (analogue), 5-core BNC, and maintenance-free operation Multi-display capabilities and tiling technologies are integrated into possible due to the laser light the PH series. This projector is also equipped with multiple digital source. GP I/O and compatible with a variety of image sources, which lets you Multiscreen function SLOT video sources. HDMI OUT DisplayPort IN 3D SYNC input and HDMI output terminals that can connect multiple projectors in a digital daisy chain. These cutting-edge functions produce * Actual hours may vary depending on usage conditions. Not a guaranteed time. a beautiful high-resolution image, including a 4K/2K high-resolution display using 4 PH1202HL projectors and various Light source and optical light path image picture in picture / picture by picture configurations. 3,840 A dustproof design supported by NEC’s unique closed-loop cooling system 1,920 1,920 1,920 1,080 2,160 The projector has a dustproof design to prevent the staining of optical components from the ingress of dust and the deterioration of Daisy chain Daisy chain Other useful functions and features Seamless switching Lens shutter Program timer with real time clock / off timer Remote control ID Silent design for 43 dB in ECO2 mode Direct power on/off, auto power on/off PIN security Network control NaViSet Administrator 2 / PC control / Alert mail CRESTRON ROOMVIEWTM / AMX BEACON PJLink / HTTP server (projector adjustment) brightness and image quality. Heat within the Digital daisy chain dustproof unit is exhausted from a heatsink, and the external air used for Geometric Correction cooling does not directly Projection isn’t confined to a standard flat screen or wall with the contact the optical system, NEC PH series. Geometric correction allows these models to project so the design offers both an image on spheres, cylinders, corner angles and many more excellent dustproofing and non-standard surfaces. cooling. COMPUTER IN REMOTE The projector is equipped with a wide range of input/output terminals Up to 20,000 hours* of 3D Service blends multiple projected images to display a single No more lamp replacements HDMI IN PH1202HL 12,000 ANSI lumens Full-HD 68.0 kg* *Not including lens