PRODUCTS Surface Mount Multilayer Ceramic Capacitors Commercial Off-the-Shelf (COTS) X7R and C0G Dielectrics Why Choose KEMET Programs Supported KEMET applies world-class service and quality to deliver industry-leading, high performance capacitance solutions worldwide. With 95% of possible dielectric solutions, KEMET offers the world’s most complete line of surface mount and through-hole capacitor technologies across tantalum, ceramic, film, aluminum and paper dielectrics. One world. One KEMET. Typical applications include military, space-quality and high-reliability applications. Features & Benefits • Same high-quality and high-reliability components as up-screened products, but at a lower cost to the customer • Eliminates need for customer-specific drawings to achieve required application reliability level • All COTS testing includes voltage conditioning and post-electrical testing per MIL PRF-55681 • Destructive Physical Analysis (DPA) per EIA-469 option • Humidity, steady state, low voltage (85/85) per MIL-STD 202, Method 103, Condition A option • All COTS-tested products include a certificate of compliance (C Of C) Test Level A Test Level B Test Level C Voltage Conditioning DWV IR@25°C CAP DF Voltage Conditioning DWV IR@25°C CAP DF Voltage Conditioning DWV IR@25°C CAP DF PDA 8% PDA 8% PDA 8% C of C DPA DPA C of C 85/85 C of C Electrical/Physical Characteristics C0G Dielectric EIA Case Sizes 0402, 0603, 0805, 1206, 1210, 1812, 1825, 2220 & 2225 Capacitance Tolerances ±0.25pF, ±0.5pF, ±1%, ±2%, ±5%, ±10% & ±20% Product Checklist DC Voltage Ratings 10V, 16V, 25V, 50V,100V & 200V • Do you require a device for a high-reliability or critical application? • Do your components require an additional level of screening in order to eliminate infant mortal failures? • Does your capacitance requirement exceed MIL-SPEC availability? • Does available board space impose case size limitations not currently offered in a MIL-SPEC? • Is a lower cost solution required? • Will COTS test criteria meet your screening requirements? Operating Temperature Range -55°C to +125°C Capacitance Change with Reference to ±30PPM/ºC +25°C and 0 VDC Applied (TCC) Aging Rate (Max % Cap Loss/Decade Hour) 0% Ordering Information CxxxTxxxxxGxx EIA Case Sizes 0402, 0603, 0805, 1206, 1210,1808, 1812, 1825, 2220 & 2225 Capacitance Tolerances ±5%, ±10% & ±20% DC Voltage Ratings 6.3V, 10V, 16V, 25V, 35V, 50V,100V, 200V & 250V Operating Temperature Range -55°C to +125°C Capacitance Change with Reference to ±15% +25°C and 0 VDC Applied (TCC) For more information, samples and engineering kits, please visit us at www.kemet.com or call 1.877.myKEMET. SA0812 Aging Rate (Max % Cap Loss/Decade Hour) 3.0% Ordering Information CxxxTxxxxxRxx Copyright © 2012 KEMET