15KP17-15KP280 15000W TRANSIENT VOLTAGE SUPPRESSOR High-reliability discrete products and engineering services since 1977 FEATURES Axial and radial available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. Available in both axial leaded and radial packages (“R” prefix for radial packages) Selections for 170 to 280 volts standoff voltage Suppresses transients up to 15000 watts @ 10/10000µa and 100000 watts @ 8/20µs Fast response MAXIMUM RATINGS Rating Value Peak Pulse Power Dissipation @ 25°C 15000 watts at 10/1000µs Impulse Repetition Rate (Duty factor) 0.05% tclamping (0 volts to V(BR) min): < 100ps theoretical for unidirectional and < 5 ns for bidirectional Operating and Storage Temperature: -65 to +150°C Thermal Resistance: 20°C/W junction to lead or 80°C/W junction to ambient when mounted on FR4 PC board with 4mm2 copper pads and track width 1 mm, length 25 mm Steady-State Power dissipation: 6 watts at TL = 30°C or 1.56 watts at TA = 25°C when mounted on FR4 PC board described for thermal resistance Forward Surge Voltage: 200A, 8.3 ms half-sine wave Solder Temperatures: 260°C for 10 s (maximum) ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Reverse Stand-Off Voltage VWM(1) Breakdown Voltage V(BR) V(BR) @ Volts 15KP17 15KP17A l(BR) Maximum Clamping Voltage VC @ lPP Maximum Standby Current lD @ VWM Maximum Peak Pulse Current lPP Maximum Temperature Coefficient of V(BR) αV(BR) Volts mA Volts µA A mV/°C 17 18.9 50 32.3 5000 464 19 17 18.9 50 29.3 5000 512 17 15KP18 18 20.0 50 34.2 5000 439 20 15KP18A 18 20.0 50 30.9 5000 485 18 15KP20 20 22.2 20 37.9 1500 396 24 15KP20A 20 22.2 20 34.3 1500 437 21 15KP22 22 24.4 10 41.1 500 365 27 15KP22A 22 24.4 10 37.1 500 404 24 15KP24 24 26.7 5 45.0 150 333 30 15KP24A 24 26.7 5 40.7 150 369 27 15KP26 26 28.9 5 48.7 50 308 32 15KP26A 26 28.9 5 44.0 50 341 29 15KP28 28 31.1 5 52.4 25 286 35 15KP28A 28 31.1 5 47.5 25 316 31 15KP30 30 33.3 5 56.2 15 267 27 15KP30A 30 33.3 5 50.7 15 296 34 15KP33 33 36.7 5 66.0 10 227 46 Part Number Rev. 20150527 15KP17-15KP280 15000W TRANSIENT VOLTAGE SUPPRESSOR High-reliability discrete products and engineering services since 1977 Reverse Stand-Off Voltage VWM(1) Breakdown Voltage V(BR) V(BR) @ Volts 15KP33A l(BR) Maximum Clamping Voltage VC @ lPP Maximum Standby Current lD @ VWM Maximum Peak Pulse Current lPP Maximum Temperature Coefficient of V(BR) αV(BR) Volts mA Volts µA A mV/°C 33 36.7 5 54.8 10 274 38 15KP36 36 40.0 5 66.0 10 227 46 15KP36A 36 40.0 5 59.7 10 251 41 15KP40 40 44.4 5 72.8 10 206 51 15KP40A 40 44.4 5 65.8 10 228 46 15KP43 43 47.8 5 77.1 10 195 55 15KP43A 43 47.8 5 69.7 10 215 50 15KP45 45 50.0 5 80.7 10 186 57 15KP45A 45 50.0 5 73.0 10 205 52 15KP48 48 53.3 5 85.9 10 175 62 15KP48A 48 53.3 5 77.7 10 193 56 15KP51 51 56.7 5 91.5 10 164 66 15KP51A 51 56.7 5 82.8 10 181 60 15KP54 54 60.0 5 96.8 10 155 70 15KP54A 54 60.0 5 87.5 10 171 63 15KP58 58 64.4 5 104.0 10 144 76 15KP58A 58 64.4 5 94.0 10 160 68 15KP60 60 66.7 5 107.0 10 140 78 15KP60A 60 66.7 5 97.3 10 154 71 15KP64 64 71.1 5 115 10 130 84 15KP64A 64 71.1 5 104 10 144 76 15KP70 70 77.8 5 126 10 119 92 15KP70A 70 77.8 5 114 10 132 83 15KP75 75 83.3 5 135 10 111 100 15KP75A 75 83.3 5 122 10 123 89 15KP78 78 86.7 5 140 10 107 104 15KP78A 78 86.7 5 126 10 119 93 15KP85 85 94.4 5 152 10 99 113 15KP85A 85 94.4 5 137 10 109 102 15KP90 90 100 5 160 10 94 120 15KP90A 90 100 5 146 10 103 109 15KP100 100 111 5 179 10 84 134 15KP100A 100 111 5 162 10 93 121 15KP110 110 122 5 196 10 77 147 Part Number Rev. 20150527 15KP17-15KP280 15000W TRANSIENT VOLTAGE SUPPRESSOR High-reliability discrete products and engineering services since 1977 Part Number Reverse Stand-Off Voltage VWM(1) Breakdown Voltage V(BR) V(BR) @ l(BR) Maximum Clamping Voltage VC @ lPP Maximum Standby Current lD @ VWM Maximum Peak Pulse Current lPP Maximum Temperature Coefficient of V(BR) αV(BR) Volts Volts mA Volts µA A mV/°C 15KP110A 110 122 5 178 10 84 133 15KP120 120 133 5 214 10 70 161 15KP120A 120 133 5 193 10 78 145 15KP130 130 144 5 231 10 65 174 15KP130A 130 144 5 209 10 72 157 15KP150 150 167 5 268 10 56 202 15KP150A 150 167 5 243 10 62 183 15KP160 160 178 5 287 10 52 216 15KP160A 160 178 5 259 10 58 195 15KP170 170 189 5 304 10 49 229 15KP170A 170 189 5 275 10 55 207 15KP180 180 200 5 321 10 47 242 15KP180A 180 200 5 291 10 52 219 15KP200 200 222 5 356 10 42 269 15KP200A 200 222 5 322 10 47 243 15KP220 220 245 5 393 10 38 297 15KP220A 220 245 5 356 10 42 269 15KP240 240 267 5 428 10 35 324 15KP240A 240 267 5 38/8 10 39 293 15KP260 260 289 5 464 10 32 352 15KP260A 260 289 5 419 10 36 317 15KP280 280 311 5 500 10 30 378 15KP280A 280 311 5 452 10 33 342 Note 1: Transient voltage suppressors are normally selected with reverse “Stand-Off Voltage” VWM which should be equal or greater than the dc or continuous peak operating voltage level. Note 2: For bidirectional construction, indicate C or CA suffix after the part number. SYMBOLS AND DEFINITIONS Symbol VWM PPP VBR Definition Working peak (stand-off voltage) Peak pulse power Breakdown voltage Symbol IPP VC I(BR) Definition Peak pulse current Clamping voltage Breakdown current for V(BR) Symbol ID Definition Standby current Rev. 20150527 High-reliability discrete products and engineering services since 1977 15KP17-15KP280 15000W TRANSIENT VOLTAGE SUPPRESSOR MECHANCIAL CHARACTERISTICS Case Digi I Marking Body-painted, alpha numeric Polarity Cathode band. Bidirectional not marked for polarity. Case 5R Marking Body-painted, alpha numeric Polarity Cathode band. Bidirectional not marked for polarity. Rev. 20150527 High-reliability discrete products and engineering services since 1977 15KP17-15KP280 15000W TRANSIENT VOLTAGE SUPPRESSOR Rev. 20150527