High-reliability discrete products and engineering services since 1977 2KBP005-2KBP10M SINGLE PHASE BRIDGE RECTFIERS FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS Rating Symbol 2KBP 2KBP 2KBP 2KBP 2KBP 2KBP 2KBP 005M 01M 02M 04M 06M 08M 10M Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Maximum average forward output rectified current at TA = 50°C IF(AV) 2.0 Amps Peak forward surge current single half-sine wave superimposed on rated load TJ= 150°C IFSM 60.0 Amps 2 It 15.0 A2s RӨJA 30.0 RӨJL 11.0 TJ, Tstg -55 to +165 Rating for fusing (t < 8.3ms) Typical thermal resistance per leg (1) Operating and storage temperature range Volts °C/W °C Note 1: Thermal resistance from junction to ambient and from junction to lead mounted on PCB with 0.47 x 0.47” copper pads. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Characteristic Maximum instantaneous forward voltage drop per leg at 3.14A Symbol VF 2KBP 2KBP 2KBP 2KBP 2KBP 2KBP 2KBP 005M 01M 02M 04M 06M 08M 10M 1.1 Units Volts Maximum DC reverse current at rated DC blocking voltage per leg TA = 25°C IR TA = 125°C Typical junction capacitance(2) µA 5 500 CJ 25 pF Note 2: Measured at 1.0 MHz and applied reverse voltage of 4.0V. Rev. 20130423 High-reliability discrete products and engineering services since 1977 2KBP005-2KBP10M SINGLE PHASE BRIDGE RECTFIERS MECHANICAL CHARACTERISTICS Case: Digi M Marking: Body painted, alpha-numeric Polarity: Cathode band Rev. 20130423 High-reliability discrete products and engineering services since 1977 2KBP005-2KBP10M SINGLE PHASE BRIDGE RECTFIERS Rev. 20130423