RF6525 Production Qualification Report Page 1 of 1 QLT-04346, Rev.1 Product Description WLAN FEM including a single DP2T switch, and Power Amplifier with LNA Qualification # 09‐QUAL‐1246 Date Issued 10/27/2010 FOR IMPORTANT INFORMATION REGARDING THESE MATERIALS INCLUDING DISCLAIMERS REGARDING USE IN CERTAIN APPLICATIONS, SEE STANDARD DISCLAIMER FOR PRODUCT DOCUMENTS Test Name Test Standard and Conditions # Samples x # Lots Test Results High Temperature Operating Lifetime JESD22‐A108 125°C, 1000 hours 1x22 lot Pass Temperature Humidity with Bias (THB, HBT8D PA die sleep mode) JESD22‐A101 85%RH / 85°C, 500 hours 1x22 lot Pass Temperature Humidity with Bias (THB, FET2D die sleep mode) JESD22‐A101 85%RH / 85°C, 500 hours 1x22 lot Pass ESD Human Body Model JESD22‐A114 3 x 1 lot Pass 500V Class 1B ESD Charge Device Model JESD22‐C101 3 x 1 lot Pass 1000V Class IV Moisture Sensitivity Level 2 IPC/JEDEC J‐STD‐020 Reflow 260°C, 6x reflow 1x22 lot Pass Temperature Cycling JESD22‐A104, 500 cycles Condition B (‐55°C/+125°C) (use MSL2 preconditioned parts) 1x22 lot Pass Solderability JESD22‐B102, 8 hr steam aging 22x3 lots Pass High Temperature Storage JESD22‐A103, 1000 hours Condition B (150°C) 25 x 3 lots Pass Characterization Data Sheet 5 x 3 lots Pass Conclusion This part meets RFMD’s qualification requirement. Sample size and lot quantities reported are the minimum required for this qualification. For additional information please contact your RFMD Customer Quality Engineer Form QAL-04-1049 Rev C