V ishay I n t e r t e chn o l o g y, I nc . Capacitors - High Reliability and Life Expectancy AND TEC I INNOVAT O L OGY HDMKP N HN VISHAY ESTA POWER CAPACITORS O 19 62-2012 Capacitors for Power Electronics Key Benefits • • • • • • High RMS current rating: up to 150 A High impulse current rating: up to 25 kA Low self-inductance of 70 nH High reliability and life expectancy Withstands heavy-duty shock and vibration Non-polar dielectric APPLICATIONS • • • • • • DC-linking and DC filtering in industry and traction converters DC-linking in low-power drives DC-linking in wind turbine converters Impulse discharge capacitors for magnetizing and welding Replacement of aluminum electrolytic capacitors (lower capacitance, higher currents) AC filter in UPS Resources • Datasheet: HDMKP - http://www.vishay.com/doc?13115 • For technical questions contact [email protected] One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT9067-1201 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Vishay ESTA Capacitors Power Ele QUICK REFERENCE DATA QUICK DATA I n t e r t e chn o lREFERENCE o g y,for I nc . DESCRIPTION DESCRIPTION AND TEC Dielectric Dielectric N O) Dissipation factorfactor (tan δ(tan Dissipation δ0) 0 INNOVAT I VISHAY ESTA POWER CAPACITORS APPLICATIONS Capacitance tolerance Capacitance tolerance Operating temperature (hot spot) Operating temperature (hot spot) Inductance Inductance 19 Lifetime expectancy Lifetime expectancy 62-2012 Reliability Reliability Test voltage Test voltage Casing material Casing material FillingFilling Standards Standards Capacitors for Power Electronics ± 0.5 27 27 Bergamid Bergamid Aluminum Aluminum Rating Rating plated plated 35 ±1 35 ± 1 DESCRIPTION Dielectric Dissipation factor (tan δ0) 9.2 A FEATURES ± 0.5 Rating Rating Aluminum Aluminum plated platedM H±1 Operating temperature (hot spot) ± 0.5 A Bergamid Bergamid QUICK REFERENCE DATA High RM High imp Low selfHigh relia Withstan Non-pola APPLICA T Capacitors for Power Electronics < 2 x 10-4/1 kHz ±5% θmin. - 40 °C Capacitance tolerance 9.2 ± 0.5 M8 x 12M8 x 12 E-016-651 (2 x) (2 x) E-016-651 Torque Torque 6 Nm 6 Nm brass nickel brassplated nickel plated VALUE Metallized polypropylene H±1 DESCRIPTION Dielectric Dissipation factor (tan δ0) • • • • • • • DC-linkin converte • DC-linkin • DC-linkin • Impulse d • Replacem M8 M E-016-658 (2 x) capacitan E-016-658 (2 x)Torque T brass nickel brassplated nickel plated • AC filter A A DIMENSIONS DIMENSIONS Vishay ESTA QUICK REFERENCE DATA ±1 Ø 84.4 Ø 84.4 ± 1 •Ø 84.4 High RMS current rating: up to 150 A Ø 84.4 • High impulse current rating: up to 25 kA M12 - 10 Nm- 10 Nm M12 - 10 Nm- 10 Nm < 70 nH M12 M12 • Low self-inductance of < 70 nH M8 Operating temperature (hot spot) Ø 17 Ø 17 M8 100 000 h at UR and < 70 °C hotspot • High reliability and life expectancy Ø 15 Ø 15 Inductance 100 FIT Ø vibrati 16 Ø 1 • Withstands heavy-duty shock and M8 (19) (19) M8 100 000 Lifetime • Non-polar dielectric Terminal/terminal = 1.5 x URDC, 10 s terminal/case = 2 x URDC + 1000 VAC,expectancy 60 s ±1 ±1 Capacitance tolerance ±1 16 16 ±1 θmax. + 80 °C Inductance Lifetime expectancy Reliability Test voltage Casing material Filling Standards 32 (4) ± 0.5 ± 0.5 32 (4) APPLICATIONS ± 0.5 9.2 32 9.2 Vishay ESTA Reliability Test voltage Casing material Filling Standards ± 0.5 HDMKP Capacitors for Power Electronics Aluminum/bergamid 3700 UF ± 0.5 32 ± 0.5 Terminal/terminal = 1.5 x URD Ø1 • DC-linking and DC-filtering in Ø 17 indus Alum convertersA (2:1) A (2:1) A( • DC-linking in low - power drives IEC 61071 • DC-linking in windturbine converters Drawing 1 Drawing 2 Drawing 1 Drawin HDMKP 900, UNDC = 900 V, UN = 220 VRMS DIMENSIONS i.e.:•HDMKP...-...I i.e.: HDMKP...-... Impulse discharge capacitors for i.e.: HDMKP...-...I i.e.:magnet HDMK VOLTAGE DIMENSIONS RthM8 Imax. IP Rs CNM8 x 12 M8 x 12DIA. Î HEIGHT WEIGHT PACKAGING M8DRAWING x 12 • Replacement of aluminum electrolytic E-016-651 E-016-658 (2 x) TYPE (2 x) E-016-658 (2 x) E-016-651 (2 x) UNIT Torque[mm] 6 Nm Torque 6 [A] Nm Torque 6 Nm Torque NO. 6 Nm M8 x 12 Vishay ESTA [A] [mm] [kg] V M8 [uF] [mΩ] [K/W] [A] DC capacitance, higher currents) brass nickel plated www.vishay.com For technical qu brass nickel plated www.vishay.com For E-016-658 (2 x) techni brass nickel plated A brass nickel plated E-016-651 (2 x) E-016-658 (2 x) Torque 6 Nm Torque 6 Nm A 1 nickel plated brass nickel plated 1 brass•nickel 900-360 900 2.4 6.0 32.0 1309 3928 105 84.4 0.7 4 brass 1 and 3 ACplated filterAin UPS A360 A ± 0.5 ± 0.5 273.2 900-460 460 900 5.4 29.0 1258 27 3775 135 84.4 0.9 4 1 andA 3 Bergamid ± 0.5 27 ± 0.5 27 Bergamid Bergamid Bergamid Bergamid Bergamid 900-720 720 900 1.3 3.2 59.0 1329 3988 185 QUICK 84.4 REFERENCE 1.2 4DATA 1 and 3 Bergamid Aluminum DESCRIPTION VALUE Aluminum Rating Rating Aluminum 900-950 950 900 1.7 2.7 56.0 1300 3899 Rating 235 84.4 1.6 4 1 and Aluminum Rating3 Rating Aluminum Aluminum Rating Ratin Aluminum plated plated Dielectric Metallized polypropylene plated plated plated plated 900-1080 1080 900 0.9 2.2 85.0 1316 3948 plated260 84.4 1.7 4 FEATURES 1 and 3 ±1 Ø 84.4 Dissipation factor (tan δ0) Ø 84.4 ± 1 < 2 x 10-4/1 kHz ± 0.5 ±1 ± 0.5 ± 1 Ø 116 ± 900-2050 Ø 84.42050 900 1.3 1.7 75.0 5610 16 830Ø 116 235 116 3.0 2Øand 4 84.4 Ø4116 • High RMS current rating: up to 150 A Capacitance tolerance ±5% High impulse current rating: up to 25 kA 900-2235 2235 900 0.6 1.6 120.0 8385 25 155 260 116 3.3 4 •M12 2 and 4 θmin. - 40 °C M12 - 10 Nm - 10 Nm M12 - 10 Nm M12 - 10 Nm M12 - 10 Nm M12 - 10 Nm Operating temperature (hot spot) • Low self-inductance of < 70 nH M12 10 Nm M8 Ø 17 θ HDMKP 1.1, 275 VRMS max. + 80 °C M8 Ø 17UNDC = 1100 V, UN = M8 • HighØreliability 17 Øand 15 life expectancy < 70 nH Ø 15 1.1-240 240 1100 2.9 4.1 28.0 1125 3375 105 Inductance 84.4 0.7 4 • Withstands 3 Ø 151 and Ø 16 heavy-duty shock and vibration M8 (19) Ø 16 (19) 100 000 h at UR and < 70 °C hotspot Lifetime expectancy ± 0.5 M8 • Non-polar dielectric Ø 16 50 1.1-325 325 1100 3.8(19) 4.8 27.0 1112 3335 135 84.4 0.9 4 1 and 3 M8 (19) ± 0.5 ± 0.5 50 Reliability 100 FIT 32 ± 0.5 32 ± 0.5 (4)1 and 3 1.1-480 480 1100 1.6 2.5 50.0 2250 6750 185 84.4 1.2 50 4 APPLICATIONS ± 0.5 Terminal/terminal = 1.5 x URDC, 10 s terminal/case = 2 x URDC + Test voltage 32 32 ± 0.5 (4) 17 1.1-650 650 1100 0.8 2.7 50.0 2220 6660 235 84.4 1.6 1 andand 3 DC-filtering in industry Øand (4)4 • DC-linking traction Casing material Aluminum/bergamid 3700 UF Ø 17 converters 1.1-720 720 1100 0.5 2.2 75.0 3375 10 125 260 84.4 1.7 4 1 and 3 A (1.5:1) A (2:1) Ø 17 Filling Resin dry, UL 94 V-0 in low 1.1-1310 1310 1.5 1.8 A (1.5:1) 72.0 4485 13 455 235 Standards 116 3.0 4 • DC-linking 2 and 4 - power drives A (1.5:1) A 1100 (2:1) A (2:1) IEC 61071-1, IEC 61881 and EN61071-1 • DC-linking in windturbine converters Drawing 2 Drawin 1.1-1425 1425 1100 0.6 1.7 114.0 6680 20 045 260 116 3.3 4 2 Drawing and 4 1 i.e.:discharge HDMKP...-...I i.e.: HDMKP...-...B i.e.: HDMK • Impulse capacitors for magnetizing and welding Drawing 4 Drawing 1 DIMENSIONS Drawing 2 Drawing 3 HDMKP 1.35, UNDC = 1350 V, UN = 325 VRMS • Replacement of aluminum electrolytic capacitors (lower i.e.: HDMKP...-...I i.e.: HDMKP...-...B i.e.: HDMKP...-...B M8 x 12 M8 M8 x 12 i.e.: HDMKP...-...I x) technicalTorque capacitance, currents)E-016-658 (2For questions, esta@visha E-016-658 (21x) and higher E-016-651 (2 x) 6 Nm contact: 1.35-160 160 1350 3.2 6.7 26.0 900 2699 105 E-016-651 84.4(2 x) 0.7Torque 6 Nm 4 www.vishay.com 3Torque 6 Nm brass nickel plated brass nickel plated brass nickel plated •1brass ACnickel filterplated in UPS A A 1.35-200 200 1350 1.2 4.6 51.0 893 2680 135 84.4 0.9 4 1 and 3 A www.vishay.com For technical questions, contact: [email protected] Document Number: 13115 ± 0.5 ± 0.5 27 27 320 1350 1.7 3.5 50.0 900 2699 185 Bergamid 84.4 1.2 4Revision: 1 and 3 1 1.35-320 17-Mar-10 QUICK REFERENCE DATA Bergamid Bergamid Bergamid 1.35-400 400 1350 2.4 3.1 45.0 820 2460 235 Aluminum 84.4 1.6 4 1 and 3 VALUE DESCRIPTION Rating Rating Aluminum Rating Aluminum Ra 1.35-480 480 1350 1.2 2.4 72.0 900 2699 260 84.4 plated1.7 4 Aluminum 1 and 3 polypropylene plated Dielectric Metallized plated pla ±1 84.4 1.35-910 910 1350 1.6 1.9 70.0 3735 11 205 235 116 3.0 4 2Øand Dissipation factor (tan δ 0) ± 0.5 < 24x 10-4/1 kHz ±1 Ø 116 Ø 84.4 Ø1 1.35-990 990 1350 0.7 1.8 108.0 5565 16 695 260 116 3.3 4 2 and 4 ± 5 % Capacitance tolerance 9.2 ± 0.5 9.2 8 H ±1 H±1 35 35 ±1 ±1 35 ± 1 ±1 Note 5.1 7.4 5.1 7.4 5.2 2.4 1.1 8.4 6.5 6.8 5.3 6.2 2.4 2.0 18.0 17.0 20.0 19.0 32 ± 0.5 (4) 21.0 52.0 84.0 8 ± 0.5 ±1 ±1 16 ± 1 H 16 27 27 ± 0.5 ± 0.5 105 84.4 135 84.4 (19) 185 84.4 ± 0.5 235 32 84.4 260 84.4 235 116 260 116 Drawing 1 i.e.: HDMKP...-...I H±1 35 35 ± 1 ±1 16 ± 1 M8 Ø 16 0.7 0.9 1.2 1.6 1.7 3.0 A (1.5:1) 3.3 Ø 17 Drawing 2 i.e.: HDMKP...-...B 9.2 ±1 35 H ±1 Rating plated Ø 116 ± 0.5 ±1 M12 - 10 Nm 4 4 450 ± 0.5 4 4 4 4 Aluminum (19) M8 3 1 and 1 and 3 Ø 16 1 and 3 1 and 3 1 and 3 Ø 17 2 and 4 A (1.5:1) 2 and 4 Drawing 3 i.e.: HDMKP...-...B M12 - 10 Nm Ø 17 Ø 15 50 M8 ± 0.5 (4) A (2:1) Drawing 4 i.e.: HDMKP...-...I • Other voltage, current and capacitance values are available on request Document Number: 13115 PRODUCT SHEET Revision: 17-Mar-10 www.vishay.com 1 For technical questions, contact: [email protected] For technical questions, contact: [email protected] 2/2 www.vishay.com 2 50 ± 0.5 (4) Dra i.e.: HD Docum R ± 0.5 8 ± 0.5 ±1 35 1 and 3 4 0.5 Ø 1162± and 4 Rating plated 2 and H±1 4 4 4 Aluminum 16 ± 0.5 8 ±1 35 16 M12 - 10 Nm 464 Ø 17 1391 Ø 15 419 1258 M8 464 1391 419 1258 450 1349 925 2775 A (2:1) 927 2781 4 1 andM83x 12questions, contact: [email protected] M8 x 12 E-016-658 (2 x) For technical E-016-651 (2 x) Torque 6 Nm Torque 6 Nm 1 and 3 brass4nickel plated brass nickel plated A A 4 ± 0.5 1 and 3 27 4 1 and 3 Bergamid Bergamid ± 0.5 2700 2700 2700 2700 2700 2700 2700 i.e.: HDMKP...-...B 9.2 40 50 80 100 120 220 240 i.e.: HDMKP...-...B 16 ± 1 2.7-40 2.7-50 2.7-80 2.7-100 2.7-120 2.7-220 2.7-240 ±1 HDMKP 2.7, UNDC = 2700 V, UN = 660 M12 VRMS - 10 Nm 105 www.vishay.com 84.4 M8 0.7 E-016-658 (2 x) Torque 6 Nm 135 0.9 brass1nickel84.4 plated A 185 ± 0.5 84.4 1.2 27 235 1.6 Bergamid 84.4 260 84.4 1.7 Rating Aluminum plated 235 116 3.0 Ø 84.4 ± 1 260 116 3.3 ±1 530A 523 530 Rating plated 2235 3330 Ø 84.4 ± 1 1568 1590 1568 1590 6705 9990 H 39.0 Bergamid 37.0 Aluminum 56.0 56.0 90.0 M8 1590 x 12 Torque 6 Nm 9.2 ± 0.5 530 H 20.0 E-016-651 (2 x) 19.0 523 brass nickel plated ± 0.5 7.4 6.0 3.9 3.2 2.7 2.4 2.0 9.2 4.8 6.4 2.5 3.3 1.7 2.4 1.1 35 ± 1 2250 2250 2250 2250 2250 2250 2250 M12 - 10 Nm M8 84.4 4 1 and 3 Ø 16< 70 nH M8 (19) 1 and 3 Ø 16 84.4 0.9 4 (19) ± 0.5 100 000 h at UR and < 70 °C hotspot 50 84.4 1.3 4 1 and 3100 FIT ± 0.5 ± 0.5 32 32 (4) 84.4 1.6 4 = 1.5 x URDC 1 and Terminal/terminal , 103s terminal/case = 2 x URDC + 1000 VAC, 60 s Ø 17 Ø 17 84.4 1.7 4 1 and 3 Aluminum/bergamid 3700 UF A (1.5:1) A (1.5:1) A (2:1) 116 3.0 4 2 Resin and 4dry, UL 94 V-0 116 Drawing 3.3 1 4 IEC 61071-1, 2Drawing andIEC 4 261881 and EN61071-1 Drawing 3 i.e.: HDMKP...-...I ±1 55 75 110 150 165 320 345 105 135 185 235 260 235 260 27 ± 0.5 1778 M12 - 10 Nm 9.2 593 θmin. - 40 °C M8 θmax. + 80 °C ± 0.5 21.0 Inductance 20.0 585 1755 Lifetime expectancy 41.0 593 1778 Reliability 39.0voltage 586 1757 Test 60.0 material 593 1780 Casing Filling 60.0 2455 7365 Standards 90.0 3650 10 955 HDMKP 2.25, UNDC = 2250 V, UN = 550 VRMS DIMENSIONS 2.25-55 2.25-75 2.25-110 2.25-150 2.25-165 2.25-320 2.25-345 16 ± 0.5 9.2 9.2 8 ± 0.5 9.2 ± 0.5 ±1 35 H±1 7.2 5.9 3.8 3.1 2.7 2.1 1.9 16 ± 1 4.4 5.8 2.3 3.0 1.6 2.0 0.9 ± 0.5 2000 2000 2000 2000 2000 2000 2000 M12 - 10 Nm Ø 17 Ø 15 0.7 27 70 90 140 180 210 390 420 27 ± 0.5 ± 0.5 27 M12 - 10 Nm HDMKP 2.0, UNDC = 2000 V, UN = 500 V RMS temperature (hot spot) Operating 2.0-70 2.0-90 2.0-140 2.0-180 2.0-210 2.0-390 2.0-420 ±1 16 ± 1 16 16 ± 0.5 27 ± 0.5 9.2 ± 0.5 ±1 ±1 16 ±1 16 ± 1 H H H ±1 35 ± 1 35 ± 1 Capacitors for Power Electronics ±1 H±1 ± 0.5 8 ± 0.5 8 ± 0.5 ± 0.5 9.2 35 ± 1 ± 0.5 Resin dry, UL 94 V-0 IEC 61071-1, IEC 61881 and EN61071-1 HDMKP Revision 17-Mar-10 Capacitors - High Reliability and Life Expectancy HDMKP • DC-linking and DC-filtering in industry and traction converters • DC-linking in low - power drives • DC-linking in windturbine converters • Impulse discharge capacitors for magnetizing and welding • Replacement of aluminum electrolytic capacitors (lower capacitance, higher currents) • AC filter in UPS HDMKP FEATUR O L OGY High RMS current rating: up to 150 A High impulse current rating: up to 25 kA V ishay Low self-inductance of < 70 nH High reliability and life expectancy Withstands heavy-duty shock and vibration Non-polar dielectric HN • • • • • • 35 ± 1 FEATURES Document Number: 13115 Revision: 17-Mar-10 VMN-PT9067-1201 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000