V I S H AY I N T E R T E C H N O L O G Y, I N C . Vishay Esta Power Capacitors PhMKP and PhMKPg ESTAprop / ESTAdry Low-Voltage Power Capacitors KEY BENEFITS • • • • Compact design to fit 300 mm cubicle modules Very low losses and small diameters for excellent heat dissipation Stacked assembled winding elements reduce the risk of device breakdown Highest overcurrent capability of up to three times rated current; and inrush current capability of 300 times rated current • Life expectancy of > 150 000 operating hours • Highest outputs of up to 37 kvar • Two versions available: oil-filled and dry, gas-filled APPLICATIONS • Recommended for power factor correction and filters in low-voltage applications ≤ 1000 VRMS RESOURCES • Datasheet: PhMKP and PhMKPg - www.vishay.com/doc?13004 • For technical questions contact [email protected] A WORLD OF SOLUTIONS Product Sheet 1/2 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-PT9025-1602 www.vishay.com V I S H AY I N T E R T E C H N O L O G Y, I N C . Vishay Esta Power Capacitors PhMKP and PhMKPg ESTAprop / ESTAdry PhMKP..., PhMKPg..., Cylindrical, LVAC www.vishay.com Low-Voltage Power Capacitors Vishay ESTA CAPACITORS IN CYLINDRICAL CASING TECHNICAL DATA STANDARDS IEC 60831-1 + 2, EN 60831- 1 + 2, UL810 LATEST EDITIONS, UL/ULC - FILE E97723 Overvoltages (in accordance with the above standards) Ucn + 10 % (up to 8 h daily) Ucn + 15 % (up to 30 min daily) Ucn + 20 % (up to 5 min, only 200 times in the life of the capacitor) Ucn + 30 % (up to 1 min, only 200 times in the life of the capacitor) Please also refer to “Terms and Definitions”. Overcurrent (in accordance with the above standards) 1.3 x In, 1.43 x In with 10 % overvoltages, 10 % over capacitance and harmonics included, continuous operation Please also refer to “Terms and Definitions”. Tolerance on capacitance -5 %/+10 % in accordance with the standards ± 5 % as Vishay ESTA standard Test voltage, terminal/terminal 2.15 x Ucn, VAC , 2 s (routine test) Test voltage, terminal/casing 4800 VAC, 2 s (routine test) Inrush current 300 times rated current In Losses 0.25 W/kvar to 0.45 W/kvar (without discharge resistors) Statistical life expectancy > 150 000 operating h (ESTAprop)* > 130 000 operating h (ESTAdry)* Degree of protection IP20 clamp terminal with mounted discharge resistor unit or IP00 (terminal cover for higher protection class upon request), indoor Ambient temperature category -25/D (max. 55 °C) ESTAprop , -40/D (max. 55 °C) ESTAdry Permitted casing temperature Max. 65 °C (measured on top of the can) Cooling Naturally air-cooled Permissible relative humidity Maximum 95 % Maximum allowed altitude 2000 m above sea level Mounting position Vertical and horizontal Mounting and grounding Threaded M12 stud at the bottom of the container Safety features All-phase overpressure tear-off fuse, self-healing Casing Aluminum can Dielectric Polypropylene film, self-healing Filling agent Natural oil, non-PCB, biodegradable (ESTAprop) or dry/gas - filled (ESTAdry) Ø 64 mm IP20 M5 terminal block A (D-351), 2.0 Nm, max. 16 mm2 drawing 1 max. current, depending on ambient conditions: 34 A (1-phase)/25 A (3-phase) Ø 84 mm IP00 M5 screw terminals (D-203), 2.0 Nm, max. 25 mm2 drawing 2, feed through max. current, depending on ambient conditions: 57 A (1-phase)/52 A (3-phase) IP20 M5 terminal block A (D-351), 2.0 Nm, max. 16 mm2 drawing 3 max. current, depending on ambient conditions: 57 A (1-phase)/52 A (3-phase) Terminals per casing Ø QUICK REFERENCE Series Description Type Ø 116 mm IP20 M5 terminal block B (D-352), 2.0 Nm, max. 25 mm2 drawing 4 max. current, depending on ambient conditions: 60 A (3-phase) DATA Ø 136 mm PhMKP…, cylindrical PhMKPg…, cylindrical IP20 M5 terminal block B (D-352), 2.0 Nm, max. 25 mm2 drawing LVAC Power5Capacitors - Oil - INDOOR, IP00 - IP20 LVAC Power Capacitors - Dry - INDOOR, IP00 - IP20 max. current, depending on ambient conditions: 60 A (3-phase) Capacitors, fixed, low voltage Capacitors, fixed, low voltage Technolo gy QUICK REFERENCE DATA MKP, metallized polypropylene film Voltage max. (V) MKP, metallized polypropylene film 1000 Revision 04-Jun-14 1000 Document Number: 13004 3 For technical questions, [email protected] 3-phase D: 3 xcontact: 11.5, 3-phase Y: 3 x 83.6, 1-phase: 49.7 3-phase D: 3 x 11.5, 3-phase Y: 3 x 83.6 Capacitance min. (µF) THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT 3-phase D: 3 x 335.0, 3-phase 3 x 219.3,1-phase: 332.2 3-phase D: 3 x 335.0, 3-phase Y: 3 x 219.3 Capacitance (µF) ARE SUBJECTmax. TO SPECIFIC DISCLAIMERS, SET FORTH ATY:www.vishay.com/doc?91000 Revision: 04-Jun-14 Output min. (kvar) 2 2 Output max. (kvar) 37.1 37.1 * Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of quality or durability. Product Sheet 2/2 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-PT9025-1602 www.vishay.com