V I S H AY I N T E R T E C H N O L O G Y, I N C . AND TEC I INNOVAT O L OGY ST/DSCC 93026 N HN TANTALUM CAPACITORS O 19 62-2012 Capacitors - DSCC 93026 approved, reliable operation in high-vibration environments SuperTan® Wet Tantalum, Hermetically-Sealed Capacitor KEY BENEFITS • • • • • • Provides the highest capacitance per unit volume Excellent temperature capability: - 55 °C to + 125 °C Very low ESR: typically 0.2 Ω to 1 Ω (depending on frequency) High ripple current rating: up to 3 A (depending on case size and voltage) Reliable operation in high-vibration environments DSCC 93026 approved APPLICATIONS • • • • Airborne, shipboard and ground-based support power supplies High-reliability and power management systems Commercial aircraft Oil and gas exploration equipment RESOURCES • Datasheets: –– ST http://www.vishay.com/doc?43000 –– DSCC http://www.vishay.com/doc?40136 • Wet tantalum capacitor product portfolio: http://www.vishay.com/capacitors/tantalum/ tantalum-wet/ • FIT calculator: http://www.vishay.com/capacitors/tantalum/capacitors/tantalum/ tantalum-wet/ tantalum-reliability-calculator-list/ • Technical support: [email protected] • Sales Contacts: http://www.vishay.com/doc?99914 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT9055-1203 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . I INNOVAT O L OGY ST/DSCC 93026 Vishay AND TEC N HN TANTALUM CAPACITORS ST O 19 62-2012 ® SuperTan Wet Tantalum, ® Super Tan Wet Tantalum Capacitors Hermetically-Sealed Capacitor with Hermetic Seal FEATURES Capacitors - DSCC 93026 approved, reliable operation in high-vibration environments • Terminations: Std. tin/lead (Sn/Pb) 100 % tin (RoHS compliant) available terminations • Very high capacitancE, 10 µF to 1800 µF • 25 VDC to 125 VDC • - 55 °C to + 125 °C • Very low ESR • High ripple current • All tantalum case, hermetically sealed • Low DCL • Compliant to RoHS Directive 2002/95/EC APPLICATION NOTES a) No continuous reverse voltage permissible. b) The peak of the applied AC ripple and the applied DC voltage must not exceed the DC voltage rating of the capacitor. c) Ripple current ratings by part number at 85 °C and 40 kHz are included in the table. Ripple current correction factors for other temperatures and frequencies are given on the next page. d)Transient reverse voltage surges are acceptable under the following conditions: The peak reverse voltage does not exceed 1.5 V and the peak current times the duration of the reverse transient does not exceed 0.05 As. In addition, the repetition frequency of the reverse voltage surge is less than 10 Hz. Vishay ST/DSCC 93026 represents a major breakthrough in wet tantalum capacitor technology. Its unique cathode system provides the highest capacitance per unit volume. The design facilitates a doubling of capacitance, lower ESR and higher ripple current rating compared with conventional wet tantalum products. Moreover, the ST has the capacitance stability of a solid tantalum capacitor and there are no circuit impedance restrictions. The ST/DSCC 93026 is housed in an all tantalum, hermetically sealed case and is manufactured to withstand hazardous environments. The ST/DSCC 93026 is used widely in the defense and aerospace industries and whenever there is a space problem DIMENSIONS in inches (millimeters) 0.250 (6.35) MAX. TERMINAL WELDED TO CASE 0.094 (2.38) MAX. E 0.025 + 0.002 (0.64 + 0.05) L CASE CODE D MAX. INSULATED D ± 0.016 (0.41) T1 0.219 (5.56) 0.188 (4.78) T2 0.312 (7.92) 0.281 (7.14) L2 0.312 (7.92) 0.281 (7.14) T3 0.406 (10.31) 0.375 (9.52) T4 0.406 (10.31) 0.375 (9.52) Notes 1. Material at egress is tantalum 2. Insulation sleeving will lap over the ends of the capacitor case. 3. Tinned nickel leads, solderable and weldable TERMINAL LOCATION WITHIN 0.031 OF CENTER “D” DIA. E L + 0.031 (0.79) UNINSULATED 0.453 (11.51) 0.641 (16.28) 1.008 (25.60) 0.766 (19.46) 1.062 (26.97) E ± 0.250 (6.35) MAX. 1.500 (38.10) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) Approx. Weight T1: 2.3 g, T2: 5.7 g T3: 9.4 g, T4: 14.8 g ST ORDERING INFORMATION ST 220 -100 T4 M I E3 SUPERTAN COMMERCIAL CAP. TYPE CAPACITANCE µF 85 °C RATED DC VOLTAGE CASE CODE CAPACITANCE TOLERANCE INSULATING SLEEVE RoHS COMPLIANT M = ± 20 % K = ± 10 % I = Insulated X = Uninsulated E3 = 100 % tin termination (RoHS compliant) Blank = SnPb termination (standard design) Revision 06-Nov-09 DSCC 93026 ORDERING INFORMATION 93026 -29 K DSCC DRAWING NUMBER DASH NUMBER CAPACITANCE TOLERANCE S K = ± 10 % M = ± 20 % DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO S = Sleeved U = Unsleeved DRAWING NO. 93026 * Pb containing terminations are not RoHS compliant, exemptions may apply PRODUCT SHEET 2/2 VMN-PT9055-1203 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000