Product Sheet

V I S H AY I N T E R T E C H N O L O G Y, I N C .
Capacitors - Max. Capacitance Range: 200 μF/6 V to 6.8 μF/125 V
AND TEC
I
INNOVAT
O L OGY
M35
N
HN
TANTALUM CAPACITORS
O
19
62-2012
Surface-Mount Wet Tantalum Capacitors
KEY BENEFITS
•
•
•
•
•
Molded, surface-mount design
Internal all-tantalum hermetic cell
Tin/lead or 100 % tin (compliant to RoHS directive 2002/95/EC) terminations
All industry standard axial leaded wet tantalum “T1” case size ratings
Maximum capacitance range: 200 µF/6 V to 6.8 µF/125 V
APPLICATIONS
• AMS (avionics, military, space) power supplies
RESOURCES
• Datasheet: http://www.vishay.com/doc?40095
• Wet tantalum capacitor product portfolio: http://www.vishay.com/capacitors/tantalum/
tantalum-wet/
• Technical support: tantalum@vishay.com
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
PRODUCT SHEET
1/2
VMN-PT0078-1203
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
INNOVAT
O L OGY
M35
Vishay
19
Wet Tantalum Capacitors,
62-2012
Wet Tantalum
Capacitors
Surface
Mount,
Molded Case
Surface
Mount,
Molded
Case
FEATURES
• Molded surface mountable design
Pb-free
• Terminations: standard tin/lead (SnPb),
100 % tin (RoHS compliant) available
Available
RoHS*
• Industry standard ratings
COMPLIANT
• Model M35 wet tantalum electrolytic chip capacitors
incorporate the advantages of all the varieties of
electrolytic capacitors and eliminate most of the
disadvantages. These units have a 3 V reverse voltage
capability at + 85 °C and a higher ripple current capability
than any other electrolytic type with similar combinations of
capacitance and case size.
• Compliant to RoHS directive 2002/95/EC
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Life Test: Capacitors are capable of withstanding a 2000 h
life test at a temperature of + 85 °C or + 125 °C at the
applicable rated DC working voltage.
Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 %
standard. ± 10 %, ± 5 % available as special.
Following life test:
DC Leakage Current (DCL Max.): At + 25 °C and above:
Leakage current shall not exceed the values listed in the
Standard Ratings Tables.
1. DCL, measured at + 85 °C rated voltage, shall not be in
excess of the original requirement.
2. The equivalent series resistance shall not exceed 150 %
of the initial requirement.
3. Change in capacitance shall not exceed 10 % from the
initial measurement.
ORDERING INFORMATION
M35
C
826
M
125
B
Z
S
L
MODEL
CASE
CODE
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
TERMINATION AND
PACKAGING
RELIABILITY
LEVEL
TEMP
ESR
See
Ratings
and
Case
Codes
Table
This is
expressed in
picofarads.The
first two digits
are the
significant
figures. The
third is the
number of zeros
to follow.
K = ± 10 %
M = ± 20 %
This is expressed in V.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point
is indicated by an “R”
(6R3 = 6.3 V).
A = 100 % tin (RoHS
compliant), bulk
B = Std, tin/lead, bulk
Z = Non-ER
S = Std.
S = Std.
L = Low
Packaging: The use of formed plastic trays for packing bulk components is standard.
TH
H
TW
DIMENSIONS in millimeters
Revision 09-Sep-09
Capacitors - Max. Capacitance Range: 200 μF/6 V to 6.8 μF/125 V
I
TANTALUM CAPACITORS
M35
AND TEC
N
HN
O
W
L
P
CASE CODE
L (MAX.)
W
H
P (MIN.)
TW
TH (MIN.)
M35
21.2
8 ± 0.3
7.5 ± 0.3
3.0
6.0 ± 0.3
1.9
* Pb containing terminations are not RoHS compliant, exemptions may apply.
www.vishay.com
1
PRODUCT SHEET
For technical questions, contact: tantalum@vishay.com
2/2
Document Number: 40095
Revision: 09-Sep-09
VMN-PT0078-1203
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000