V I S H AY I N T E R T E C H N O L O G Y, I N C . I INNOVAT AND TEC O L OGY T97 Tantalum N HN CAPACITORS O 19 62-2012 Capacitors - Ultra-low ESR Down to 0.015 Ω 75 V Rated Tantalum Capacitors Tantamount High-Reliability, Low ESR KEY BENEFITS • • • • • • Highest available capacitance and voltage High-reliability screening options available, including Weibull grading Surge current testing options per MIL-PRF-55365 State-of-the-art CV in a wide variety of case sizes Ultra-low ESR down to 0.015 Ω Tin/lead (Sn/Pb) terminations standard; 100 % tin available) APPLICATIONS • Power management • Military weapons systems including avionics, radar systems, and ruggedized electronics • Commercial avionics RESOURCES • Datasheet: http://www.vishay.com/doc?40092 • Tantalum product portfolio: http://www.vishay.com/capacitors/tantalum/ • FIT calculator: http://www.vishay.com/capacitors/tantalum/capacitors/tantalum/ tantalum-wet/ tantalum-reliability-calculator-list/ • Technical questions: contact [email protected] • Sales contacts: http://www.vishay.com/doc?99914 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT9207 1210 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 I INNOVAT T97 Tantalum PERFORMANCE CHARACTERISTICS 19 Capacitance Range: 10 μF to 1500 μF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 VDC to 75 VDC www.vishay.com/doc?40088 Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) O L OGY CAPACITORS Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. HN • Surge current testing per MIL-PRF-55365 options available • Ultra-low ESR • Tin/lead (SnPb) termination available V ISurface S H AYmount I N T E R T E C H N O L O G Y, I N C . • Mounting: • Material categorization: For definitions of compliance AND TEC N please see www.vishay.com/doc?99912 O 62-2012 Capacitors - Ultra-low ESR Down to 0.015 Ω ORDERING INFORMATION T97 R 227 K 020 E S A TYPE CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C TERMINATION/ PACKAGING (available options are series dependent) RELIABILITY LEVEL SURGE CURRENT See Ratings and Case Code table This is expressed in pF. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). E = Sn/Pb solder/ 7" (178 mm) reel L = Sn/Pb solder/ 7" (178 mm), 1/2 reel C = 100 % tin/ 7" (178 mm), reel H = 100 % tin/ 7" (178 mm), 1/2 reel A = 1.0 % Weibull B = 0.1 % Weibull (1) S = 40 h burn-in Z = Nonestablished reliability A = 10 cycles at + 25 °C B = 10 cycles at - 55 °C/ + 85 °C S = 3 cycles at 25 °C Notes (1) Available on select ratings. See “Standard Ratings” table. • We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. DIMENSIONS in inches [millimeters] J Tantalum wire nib identifies anode (+) terminal W D L H B A CASE CODE V D E R F Z M H N L (MAX.) 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.315 [8.0] 0.315 [8.0] 0.315 [8.0] W 0.173 ± 0.016 [4.4 ± 0.4] 0.173 ± 0.016 [4.4 ± 0.4] 0.173 ± 0.016 [4.4 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.260 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] 0.260 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] 0.260 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] H 0.079 [2.0 max.] 0.138 [3.5 max.] 0.157 ± 0.016 [4.0 ± 0.4] 0.142 ± 0.016 [3.6 ± 0.4] 0.185 ± 0.016 [4.7 ± 0.4] 0.236 ± 0.016 [6.0 ± 0.4] 0.142 ± 0.016 [3.6 ± 0.4] 0.205 ± 0.016 [5.2 ± 0.4] 0.252 ± 0.016 [6.4 ± 0.4] Note www.vishay.com • The anode termination (D less B) will be a minimum of 0.012" [0.3 mm] Revision: 11-Apr-12 A 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.055 ± 0.016 [1.4 ± 0.4] 0.055 ± 0.016 [1.4 ± 0.4] 0.051 ± 0.012 [1.3 ± 0.3] 0.055 ± 0.016 [1.4 ± 0.4] 0.056 ± 0.017 [1.4 ± 0.4] B 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.197 ± 0.024 [5.0 ± 0.6] 0.197 ± 0.024 [5.0 ± 0.6] 0.196 ± 0.025 [5.0 ± 0.6] D (REF.) 0.252 [6.4] 0.252 [6.4] 0.252 [6.4] 0.244 [6.2] 0.244 [6.2] 0.244 [6.2] 0.260 [6.6] 0.260 [6.6] 0.259 [6.6] J (MAX.) 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] T97 Vishay Sprague Document Number: 40092 1 RATINGS AND CASE CODES For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT DESCRIBED HEREIN μF 4V 6.3 V 10 V 16 V NOTICE. 20 VTHE PRODUCTS 25 V 35 V 50 V AND THIS 63 DOCUMENT V 75 V ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 10 D R 15 E/R R 22 R F 33 F 47 R Z/N 68 R F 100 F F 150 F 220 E R M 330 V E F H/F 470 V E E H 680 E E R 1000 E/R R F 1500 R STANDARD RATINGS PRODUCT SHEET 2/2 MAX. VMN-PT9207 1210 MAX. DF MAX. ESR AVAILABLE MAX. DCL RIPPLE CAPACITANCE AT + 25 °C AT + 25 °C RELIABILITY CASE CODE PART NUMBER AT + 25 °C 100 kHz (μF) 120 Hz 100 kHz (μA) DESCRIBED HEREIN AND THIS DOCUMENT ARE LEVELS THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS SUBJECT TO IRMS (A) (%) (m) SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 4 V AT + 85 °C; 2.7 V AT + 125 °C DC 470 V T97V477(1)004(2)(4)(5) DC 18.8 8 60 2.2 A, B, S, Z