V I S H AY I N T E R T E C H N O L O G Y, I N C . CAPACITORS 592D SERIES TANTALUM 592D Series Conformal-Coated Solid Tantalum Capacitors KEY BENEFITS • Highest capacitance offered in a low-profile case (case heights between 1.3mm - 2.0mm) • Low ESR: as low as 35 mΩ with the 591D Series • Very high capacitance: up to 2200 μF • Design convenience, efficiency and portability • Low ESL: inductance of conformal construction is 1/3 of molded chips • Cost-savings; ability to replace several lesser-value capacitors APPLICATIONS • Bulk capacitance used in voltage holdup for power amplifiers in wireless data communications • Filtering • Noise suppression • Timing • Coupling RESOURCES • Datasheet: http://www.vishay.com/doc?40004 • Tantalum product portfolio: http://www.vishay.com/capacitors/tantalum/ • FIT calculator: http://www.vishay.com/capacitors/tantalum/capacitors/tantalum/tantalum-wet/ tantalum-reliability-calculator-list/ • Technical questions: contact [email protected] • Sales contacts: http://www.vishay.com/doc?99914 • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 A WORLD OF SOLUTIONS PRODUCT SHEET 1/2 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-PT9148-1603 www.vishay.com D 0.295 [7.5] M 0.295 [7.5] R 0.283 [7.2] S X 0.169 ± 0.012 [4.3 ± 0.3] 0.248 ± 0.012 [6.3 ± 0.3] 0.236 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] 0.063 ± 0.012 [1.6 ± 0.3] 0.290 + 0.010/- 0.020 [7.37 + 0.25/- 0.5] www.vishay.com 0.138 [3.5] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.051 ± 0.016 [1.3 ± 0.4] 0.181 ± 0.024 [4.6 ± 0.6] 0.200 ± 0.024 [5.1 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.079 ± 0.012 [2.0 ± 0.3] 0.469 ± 0.024 [11.9 ± 0.6] 0.252 [6.4] 0.004 [0.1] 0.004 [0.1]N O L O G Y, I N C . V I S H AY I0.264 N T[6.7] ERTE CH 0.244 [6.2] 592D 0.004 [0.1] CAPACITORS Vishay Sprague 0.004 [0.1] 0.087 [2.2] 0.52® [13.2] 0.004 [0.1] Solid Tantalum Chip Capacitors TANTAMOUNT , 592D SERIES TANTALUM Low Profile, Low ESR, Conformal Coated, Maximum CV 0.571 [14.5] Notes • The anode termination (D less B) will be a minimum of 0.012" [0.3 mm] • For package height, please refer to specific rating in the “Standard Ratings” table FEATURES • New robust ratings for pulsed applications RATINGS AND CASE CODES μF 4V 6.3 V 10 V 1.0 1.5 2.2 3.3 4.7 A 6.8 A 10 A A/B 15 A/B B 22 A/B A/B A/B/C 33 B A/B/C/S C/D 47 C A/B/C/D B/D/R 68 B/C/D B/C/D/R B/C/D/R 100 A/B/C/D/R B/C/D/R B/C/D/R 120 C 150 B/C/D/R C/D/R C/D 220 C/D/R C/D/R D/R 330 C/D C/D/R D/R 470 C/D/R C/D/R PERFORMANCE CHARACTERISTICS 680 D/R R X www.vishay.com/doc?40088 1000 R R/X Operating Temperature: 55 °C to + 85 °C 1500 X M/R/X (To +2200 125 °C with voltage derating)X X 16 V • 1.0 mm 20to V 2.5 mm height 25 V 35 V 50 V B B/C C/D C C • Terminations: 100 % matte tin (2) A/Bstandard, tin/lead available B A Surface mount A/B • Mounting: B/C • 8 mm, 12 mm tape and reel packaging available per A/B C B/C/D/R C/R EIA 481 and reeling per IEC 60286-3 B/C C/D D/R R 7" [178 mm] standard B/C/D B/D/R R R 13" [330 mm] available A A/B B/C B/C/D B/C/D • B/C/D/R• B/C/R C/D • C/D D/R R C/D/R R Case code B/D/Rcompatibility with EIA 535BAAC and CECC 30801 R 592W for additional ratings designs for pulsed See also applications R Material categorization: For definitions please see www.vishay.com/doc?99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. Capacitance Range: 1 μF to 2200 μF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 VDC to 50 VDC ORDERING INFORMATION Revision: 09-Mar-12 592D 106 Document Number: 40004 2 010 B 2 T 15H For technical questions, contact: [email protected] THISCAPACITANCE DOCUMENT IS SUBJECT TO CHANGE WITHOUTRATING NOTICE. THECASE PRODUCTS DESCRIBED HEREIN TYPE CAPACITANCE DC VOLTAGE TERMINATION REELAND SIZETHIS ANDDOCUMENT SUFFIX ARE SUBJECT TO SPECIFICATDISCLAIMERS, SET CODE FORTH AT www.vishay.com/doc?91000 TOLERANCE + 85 °C PACKAGING X0 This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = ± 20 % X9 = ± 10 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). See Ratings and Case Codes table 2 = 100 % tin 4 = Gold plated 8 = Solder plated 60/40 Special order T = Tape and reel 7" [178 mm] reel W = 13" [330 mm] reel Maximum height (mm) see Standard Ratings table Note • Preferred tolerance and reel sizes are in bold. We reserve the right to substitute form-fit-function replacement products with higher voltage rating, tighter capacitance tolerance or lower www.vishay.com ESR (e.g., 591D series). 592D Vishay Sprague DIMENSIONS in inches [millimeters] Tantalum wire nib identifies anode (+) terminal W L MAX. B D REF. J MAX. A J MAX. Revision: 09-Mar-12 Document Number: 40004 1 H For technical questions, contact: [email protected] THISCODE DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED THIS DOCUMENT CASE L MAX. W A B HEREIN AND D REF. J MAX. ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 0.071 ± 0.012 0.031 ± 0.012 0.087 ± 0.016 A 0.146 [3.7] 0.114 [2.9] 0.004 [0.1] [1.8 ± 0.3] [0.8 ± 0.3] [2.2 ± 0.4] 0.110 ± 0.012 0.031 ± 0.012 0.098 ± 0.016 B 0.157 [4.0] 0.138 [3.5] 0.004 [0.1] [2.8 ± 0.3] [0.8 ± 0.3] [2.5 ± 0.4] C 0.28 [7.1] D 0.295 [7.5] M 0.295 [7.5] R 0.283 [7.2] S 0.138 [3.5] X 0.571 [14.5] 0.126 ± 0.012 [3.2 ± 0.3] 0.169 ± 0.012 [4.3 ± 0.3] 0.248 ± 0.012 [6.3 ± 0.3] 0.236 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] 0.063 ± 0.012 [1.6 ± 0.3] 0.290 + 0.010/- 0.020 [7.37 + 0.25/- 0.5] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.031 ± 0.012 [0.8 ± 0.3] 0.051 ± 0.016 [1.3 ± 0.4] 0.173 ± 0.024 [4.4 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.200 ± 0.024 [5.1 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.079 ± 0.012 [2.0 ± 0.3] 0.469 ± 0.024 [11.9 ± 0.6] 0.236 [6.0] 0.004 [0.1] 0.252 [6.4] 0.004 [0.1] 0.264 [6.7] 0.004 [0.1] 0.244 [6.2] 0.004 [0.1] 0.087 [2.2] 0.004 [0.1] 0.52 [13.2] 0.004 [0.1] Notes • The anode termination (D less B) will be a minimum of 0.012" [0.3 mm] • For package height, please refer to specific rating in the “Standard Ratings” table RATINGS AND CASE CODES μF 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 1.0 A/B 2/2 1.5 B 2.2 A A/B B/C DOCUMENT IS SUBJECT 3.3 TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND B/C C/D 4.7TO SPECIFIC DISCLAIMERS, SET A FORTH AT A www.vishay.com/doc?91000 A/B C B/C/D/R DOCUMENT ARE SUBJECT 6.8 A A/B B/C C/D D/R 10 A A/B B/C B/C/D B/D/R R PRODUCT SHEET THIS THIS 50 V B C C C/R R R VMN-PT9148-1603 www.vishay.com