TECHNICAL DATA SHEET RayMark Six labels MATERIAL DESCRIPTION: Computer-printable zero halogen label material. Permanent pressure sensitive acrylic adhesive. Thermally stabilised white polyester film with special ink receptive latent cure epoxy coating on the label surface. After printing, the surface is heat cured, embedding the image within a tough polymeric layer. USE: RayMark Six labels have outstanding abrasion and fluid resistance without the need for an overlay. Ideal for applications where high performance variable data labels are needed, for example in defence, marine, rail and aerospace applications. Can be used as a wire/cable wraparound marker for substrates not less than 6mm (0.25 inches) diameter. Not recommended for outdoor use. PRINT METHOD/RIBBON: Dot Matrix: Tyco LQ870, Tyco TMS-SYSTEM-SIX-RIBBON-A. CURING CONDITIONS: 5 minutes at 150ºC (302ºF) in an air circulating oven. Small curing unit with automatic drive available (“Permatizer”). Curing also possible with hot air gun. Contact Tyco for details. SHELF LIFE/STORAGE CONDITIONS: Can be stored unopened for 12 months at temperatures not exceeding 35ºC (95ºF). Once opened, product should be stored below 25ºC (77ºF) and 80% relative humidity and used within 6 months. SERVICE TEMPERATURE: Wiring marking: -40ºC to +85ºC (-40ºF to +185ºF) continuous. Panel marking: -40ºC to +105º (-40ºF to +221ºF) continuous. Excursion Temperature: 200ºC (392ºF) for 2 hours. INSTALLATION TEMP: +10°C to +40°C (+50°F to +104°F). COLORS: White. www.idento.com Business locations: N America: + 1 650 361 3860 (West Coast) Germany: + 49 (0) 6074 89080 UK: + 44 (0) 1495 244000 (Labels) Japan: + 81 (0) 44 900 5102 Document number: TTDS-032 Date: Octobeter 2001 Issue: 1 Pages: 3 N America: + 1 401 751 6505 (East Coast) France: + 33 (0) 476 099696 UK: + 44 (0) 1793 528171 (Other products) Singapore: + 65 (0) 4866 151 All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification. RayMark Six labels PERFORMANCE: PROPERTY Tensile Strength Fungus Resistance Weathering, carbon arc Weatherometer Light fastness, xenon arc Continuous humidity Salt spray resistance Thermal Ageing Thermal cycling Low temperature impact Dry abrasion resistance Toxicity index Smoke index Oxygen index Adhesion to: Stainless steel Stainless Steel Aluminum Acrylic Paint ABS Nylon PVC TEST METHOD ASTM D882 BS2011 Part 2.1 JV1 1500h, BS3900 F3 250h, ASTM G26A RESULT 200N/25mm Rating 1 (max) Legible, <3 gray scale change, 15 N/25mm adhesion Legible, <3 gray scale change, 20 N/25mm adhesion Legible, 15 N/25mm adhesion 168h, 40ºC (104ºF)/95% RH JEDEC 22A101-A 30days at 35ºC (95ºF), ASTM B117 168h at 150ºC (302ºF), ISO 188 10 cycles, -55ºC (-67ºF) to 150ºC (302ºF), MIL-STD-810 503.3 RTM 2592 500 cycles, 500g, CS10 wheel BS4781-1990 A7 NES 713 NES 711 NES 714 2.8 4 >29 installed FINAT FINAT FINAT FINAT FINAT FINAT FINAT 15 N/25mm 10 N/25mm 20 N/25mm 20 N/25mm 20 N/25mm 15 N/25mm 15 N/25mm FTM1, 23ºC FTM1, 85ºC FTM1, 23ºC FTM1, 23ºC FTM1, 23ºC FTM1, 23ºC FTM1, 23ºC www.idento.com Business locations: N America: + 1 650 361 3860 (West Coast) Germany: + 49 (0) 6074 89080 UK: + 44 (0) 1495 244000 (Labels) Japan: + 81 (0) 44 900 5102 Legible, 15N/25mm adhesion Legible, 30N/25mm adhesion Legible, 25N/25mm adhesion No cracking Legible Document number: TTDS-032 Date: Octobeter 2001 Issue: 1 Pages: 3 N America: + 1 401 751 6505 (East Coast) France: + 33 (0) 476 099696 UK: + 44 (0) 1793 528171 (Other products) Singapore: + 65 (0) 4866 151 All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification. RayMark Six labels PRINT PERMANENCE: THREAT White spirit /IPA mixture 23ºC (73ºF) Fluid splash resistance: Brake fluid 23ºC (73ºF) Petrol 23ºC (73ºF) Fluid Immersion (followed by peel test): Methylated spirit 24h 23ºC (73ºF) Isopropyl alcohol 24h 23ºC (73ºF) Petrol 24h 23ºC (73ºF) Hydraulic fluid 28 days 50ºC (122ºF) Lubricating oil 28 days 50ºC (122ºF) Hydraulic fluid 24h 23ºC (73ºF) Aviation Fuel 24h 23ºC (73ºF) Diesel fuel 24h 23ºC (73ºF) Boiling water 2h TEST METHOD RESULT MIL-STD-202F 215F Legible RW 2029 RW 2029 Legible Legible MIL-M-81531 4.6.2 MIL-M-81531 4.6.2 MIL-M-81531 4.6.2 MIL-M-81531 4.6.2 MIL-M-81531 4.6.2 MIL-M-81531 4.6.2 MIL-M-81531 4.6.2 MIL-M-81531 4.6.2 MIL-M-81531 4.6.2 Legible; min 15N/25mm adhesion Legible; min 15N/25mm adhesion Legible; min 5N/25mm adhesion Legible; min 15N/25mm adhesion Legible; min 15N/25mm adhesion Legible; min 15N/25mm adhesion Legible; min 15N/25mm adhesion Legible; min 15N/25mm adhesion Legible; min 15N/25mm adhesion Note: see Tyco specification RW2029 for full performance & dimensional details. www.idento.com Business locations: N America: + 1 650 361 3860 (West Coast) Germany: + 49 (0) 6074 89080 UK: + 44 (0) 1495 244000 (Labels) Japan: + 81 (0) 44 900 5102 Document number: TTDS-032 Date: Octobeter 2001 Issue: 1 Pages: 3 N America: + 1 401 751 6505 (East Coast) France: + 33 (0) 476 099696 UK: + 44 (0) 1793 528171 (Other products) Singapore: + 65 (0) 4866 151 All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.