The VTC-5765A pulsed-coupled cavity TWT produces 75 kW of peak output power over 5.4 GHz to 5.9 GHz at a duty cycle of up to 2%. This device is ppm focused , non-intercepting grid pulsed, and has a single stage depressed collector. Custom configurations are also available. These variations include: cooling method (affects average power level), mechanical configuration, electrical and RF connections, and a multiple stage depressed collector. Typical Operating Parameters Features • • • • • • • • • 5.4 GHz to 5.9 GHz 75 kW PEAK OUTPUT POWER 2.0 % DUTY CYCLE NON-INTERCEPTING GRID PULSED 47 dB GAIN SINGLE STAGE DEPRESSED COLLECTOR FORCED LIQUID COOLED PPM FOCUSED COAXIAL INPUT, WR 187 WAVEGUIDE OUTPUT PARAMETER Cathode Voltage Cathode Current Heater Voltage Heater Current Collector Voltage Grid Bias Voltage Grid Pulse Voltage RF Drive Power Pulse Width Duty Cycle Cooling Flow Rate Pressure Drop Weight Dimensions MIN -39 --8 --25 -550 350 ------3.5 ------- MAX -37 12 10 8 28 -450 500 0.75 100 2.0 --40 55 6 X6X 40 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For additional information on CPI MPP products contact: CPI MPP, Coupled Cavity TWT Operation - 3120 Hansen Way, Palo Alto, CA 94303-0750 Phone: 650-846-3073, Fax: 650-857-1708, Email: [email protected], www.cpii.com/mpp UNITS kV a V A kV V v W µsec % gpm psig lbs inches