The VTC-6660E is a CW coupled cavity TWT that produces 40 kilowatts of power over a frequency range of 5.850 GHz to 6.425 GHz. This device is anode switched, has a single stage depressed collector and has 35 dB of gain. Custom configurations are available. These variations include alternate RF connections and locations, and a multiple stage depressed collector. Typical Operating Parameters Features • • • • • • • • • 5.850 GHz to 6.425 GHz 40 kW OUTPUT POWER ANODE SWITCHED 35 dB GAIN DEPRESSED COLLECTOR FORCED LIQUID COOLED INTEGRAL SOLENOID FOCUSED WR 159 WAVEGUIDE OUTPUT TYPE N COAXIAL INPUT PARAMETER Cathode Voltage Cathode Current Heater Voltage Heater Current Collector Voltage Solenoid Voltage Solenoid Current RF Drive Power Body Current Duty Cycle Anode Current Cooling Flow Rate: Collector Body Solenoid Weight Dimensions MIN -36 --6.5 --.77Ek ----------- ----- MAX -39 9.0 8.5 10.0 0.83Ek 120 30 6.0 250 CW 20 UNITS kV a V A kV V A W mA % 50.0 6.0 2.0 300 gal/min gal/min gal/min lbs inches 24 dia X 48 lg mA The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For additional information on CPI MPP products contact: CPI MPP, Coupled Cavity TWT Operation - 3120 Hansen Way, Palo Alto, CA 94303-0750 Phone: 650-846-3073, Fax: 650-857-1708, Email: [email protected], www.cpii.com/mpp