SGC201BSD

SGC201BSD
Surface Mount Schottky Rectifier
Reverse Voltage 100V Forward Current 20A
Features
•
•
•
•
•
•
•
•
•
Schottky barrier diodes
Low forward voltage drop
Low leakage current
Moisture sensitivity: level 1, per J-STD-020
Solder dip 260 °C, 10 s
Low profile - typical height of 1.1 mm
Heatsink design
High temperature soldering guaranteed: 260℃/10 seconds
Halogen-free according to IEC 61249-2-21 definition
eSGC (TO‐277) Anode 1
Cathode
& Heatsink
Anode 2
Typical Applications
For low voltage high frequency inverters, DC/DC converters and polarity protection application.
Maximum Ratings
(TA = 25 °C
C unless otherwise noted)
Parameter
Symbol
SGC201BSD
Unit
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
VRRM
VRMS
VDC
IF(AV)
100
70
100
20.0
V
V
V
A
Peak forward surge current 8.3
8 3 ms single
half sine-wave superimposed on rated load
IFSM
240
A
Operating junction and storage temperature
range
TJ, TSTG
-55 to +150
°C
Electrical Characteristics
Parameter
Maximum instantaneous forward voltage
Maximum DC reverse current at rated DC
blocking voltage
Typical junction capacitance
www.goodark.com
(TA = 25 °C unless otherwise noted)
Test Conditions
IF=1A
IF=2A
IF=3A
IF=5A
IF=10A
IF=20A
IF=5A
IF=20A
Symbol
TA=25℃
VF
TA=125℃
TA=25℃
TA=125℃
4.0 V, 1 MHz
VR=100V
1/4
IR
CJ
TYP.
MAX.
0.38
0.41
0.43
0.47
0.55
0.68
0.39
0.61
29.5
15.2
0.53
0.85
0.70
250
30
290
Unit
Volts
uA
mA
pF
2014.08-Rev.A
SGC201BSD
Surface Mount Schottky Rectifier
Reverse Voltage 100V Forward Current 20A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 1.Maximum Non‐Repetitive Peak Forward Surge Current
Figure 2. Typical Reverse Characteristics Figure 4. Typical Instantaneous Forward Characteristics Figure 3. Typical Junction Capacitance
Notes
1) Mounted on P.C.B with 30*30mm copper pad area
2) Fre air, Mounted on recommended copper pad area Figure 5.Forward Current Derating Curve
www.goodark.com
2/4
2014.08-Rev.A
SGC201BSD
Surface Mount Schottky Rectifier
Reverse Voltage 100V Forward Current 20A
Package Outline Dimensions
DIM
HE
E
D
B1
B2
A
C
L
L1
L2
L3
D1
E1
Unit: mm
Unit: inch
MIN MAX
64
6.4
66
6.6
5.6
5.8
4.1
4.3
1.7
1.9
0.8
1
1.05 1.2
0.3
0.4
0.85 1.1
4.2
4.4
3.52 Typ.
1.1
1.4
3
3.3
1.86 Typ.
MIN MAX
0 252 0.260
0.252
0 260
0.220 0.228
0.161 0.169
0.067 0.075
0.031 0.039
0.041 0.047
0.012 0.016
0.033 0.043
0.165 0.173
0.139 Typ.
0.043 0.055
0.118 0.130
0.073 Typ.
Soldering footprint
Packing Information
Packing quantities:
5000 pcs/Reel,12mm Tape, 13" Reel
Tape & Reel Specification
www.goodark.com
3/4
2014.08-Rev.A
SGC201BSD
Surface Mount Schottky Rectifier
Reverse Voltage 100V Forward Current 20A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the Suzhou
Good-Ark product best suited to the customer’s application; they do not convey any license under any
intellectual property rights, or any other rights, belonging to Suzhou Good
Good-Ark
Ark Electronics Co., Ltd.or a
third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of
any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs,
algorithms, or circuit application examples contained in these materials.
All information contained in these materials,
materials including product data,
data diagrams,
diagrams charts,
charts programs and
algorithms represents information on products at the time of publication of these materials, and are
subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product
improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark
Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product
information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no
responsibility for any damage,
damage liability,
liability or other loss rising from these inaccuracies or errors.
errors Please
also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various
means, including our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data, diagrams,
charts, programs, and algorithms, Please be sure to evaluate all information as a total system before
making
ki
a final
fi l decision
d i i
on the
th applicability
li bilit off the
th information
i f
ti
and
d products.
d t Suzhou
S h
Good-Ark
G dAk
Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the
information contained herein.
The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or
reproduce in whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on
these materials or the products contained herein.
www.goodark.com
4/4
2014.08-Rev.A