LS5B0 Surface Mount Schottky Rectifier Reverse Voltage 100V Forward Current 5A Features • • • • • • • Schottky barrier diodes Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 Solder dip 260 °C, 10 s Low profile， typical thickness 1.0mm AEC-Q101 qualified eSGB (SMAF) Typical Applications For use in low voltage,high freqency inverters,free wheeling, and polarity protection application Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Symbol LS5B0 Unit VRRM VRMS VDC 100 V 70 V 100 V 1) Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range Electrical Characteristics Parameter IF=1A, TA=25℃ IF=2A, TA=25℃ IF=5A, TA=25℃ IF=5A, TA=125℃ Maximum DC reverse TA=25℃ current at rated DC blocking TA=125℃ voltage Typical junction capacitance 4.0 V, 1 MHz Typical thermal resistance A 3.0 150 A - 55 to + 150 °C (TA = 25 °C unless otherwise noted) Test Conditions Symbol Instantaneous forward voltage 5.0 IF(AV) IF(AV)2) IFSM TJ, TSTG VF Min Typ Max - 0.49 - - 0.60 - - 0.78 0.82 - 0.61 0.70 0.5 IR 50 CJ 154 juntion to mount RθJM 1) juntion to ambient RθJA 2) 20 75 Unit Volts mA pF ℃/W Notes: 1)Thermal resistance RθJM is junction to mount. Free air,mounted on aluminum P.C.B with recommended copper pad 2)Thermal resistance RθJA is junction to ambient.Mounted on P.C.B with 8×8mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2014.06-Rev.A LS5B0 Surface Mount Schottky Rectifier Reverse Voltage 100V Forward Current 5A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 3. Typical Reverse Characteristics Figure 4. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance www.goodark.com 2/4 2014.06-Rev.A LS5B0 Surface Mount Schottky Rectifier Reverse Voltage 100V Forward Current 5A Package Outline Dimensions DIM Unit: mm Unit: inch MIN MAX MIN MAX A 0.92 1.08 0.036 0.043 A1 0 0.1 0.000 0.004 B 1.25 1.45 0.049 0.057 C 0.1 0.25 0.004 0.010 D 2.6 2.8 0.102 0.110 E 4.1 4.3 0.161 0.169 L 0.7 1.1 0.028 0.043 HE 4.8 5.2 0.189 0.205 Soldering footprint Packing Information Packing quantities: 10,000 pcs/Reel，12mm Tape, 13" Reel Tape & Reel Specification www.goodark.com 3/4 2014.06-Rev.A LS5B0 Surface Mount Schottky Rectifier Reverse Voltage 100V Forward Current 5A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.06-Rev.A