Surface Mount Multilayer Ceramic Capacitors PRODUCTS KPS Series Commercial and Automotive Grade X7R Dielectric Why Choose KEMET Programs Supported KEMET applies world-class service and quality to deliver industry-leading, high performance capacitance solutions worldwide. With 95% of possible dielectric solutions, KEMET offers the world’s most complete line of surface mount and through-hole capacitor technologies across tantalum, ceramic, film, aluminum and paper dielectrics. One world. One KEMET. Demanding alternative energy, industrial/lighting, automotive, military/aerospace and telecommunications applications: • Power supplies • Smoothing circuits • DC-to-DC converters • Input/output filters • Piezoelectric and mechanical noise reduction • Improving flex performance in board flex application Features & Benefits • • • • • • • • • • • • Electrical/Physical Characteristics Higher capacitance in the same footprint Potential board space savings Single and double chip options available Advanced protection against thermal and mechanical stress Provides up to 10 mm of board flex capability Reduces audible, microphonic noise Extremely low ESR and ESL Pb-free and RoHS-compliant Capable of Pb-free reflow profiles Non-polar device, minimizing installation concerns Tantalum and electrolytic alternative Automotive Grade (AEC-Q200) available Case Size Tolerances Dielectric Temperature Range Voltage Options Capacitance Values 1210, 1812, 2220 ±10%, ±20% X7R (Temperature characteristic = ±15% capacitance shift from -55° to +125°C) -55°C to +125°C 10 V, 16 V, 25 V, 50 V, 100 V, 250 V, 500 V, 630 V 0.1 µF to 47 µF Product Checklist • Do you require a device capable of Pb-free reflow profiles? • Do you require advanced protection against thermal and mechanical stress? • Is your circuit board subject to high levels of board flexure during assembly, mounting or depanelization? • Does your circuit have integrated current limitation? • Does your application have a direct battery or power source connection? • Do you prefer a high capacitance ceramic alternative to tantalum or aluminum capacitor technologies? • Do you require a device with high ripple current capability? Ordering Information Ceramic C 1 2 3 SA1112 Case Specification/ Capacitance Capacitance Size Code (pF) Tolerance1 Series (L”x W”) Rated Voltage (VDC) 2220 C 106 M 5 1210 1812 2220 C = Standard 2 Sig. Digits + Number of Zeros. K = ±10% M = ±20% 8 = 10 V 4 = 16 V 3 = 25 V 5 = 50 V 1 = 100 V A = 250 V C = 500 V B = 630 V Dielectric Failure Rate/ Design R 2 R = X7R 1 = KPS Single Chip Stack 2 = KPS Double Chip Stack Leadframe Packaging/ Grade Finish2 (C-Spec)3 C C = 100% Matte Sn 7186 7186 = 7” Reel Unmarked 7289 = 13” Reel Unmarked Double chip stacks (“2” in the 13th character position of the ordering code) are only available in M (±20%) capacitance tolerance. Single chip stacks (“1” in the 13th character position of the ordering code) are available in K (±10%) or M (±20%) tolerances. Additional leadframe finish options may be available. Contact KEMET for details. Additional reeling or packaging options may be available. Contact KEMET for details. Copyright © 2012 KEMET