Multilayer Ceramic Capacitors SOLUTIONS Electronic Components High Voltage Surface Mount Why Choose KEMET Applications KEMET Electronics Corporation is a leading global supplier of electronic components. We offer our customers the broadest selection of capacitor technologies in the industry, along with an expanding range of electromechanical devices, electromagnetic compatibility solutions and supercapacitors. Our vision is to be the preferred supplier of electronic component solutions for customers demanding the highest standards of quality, delivery and service. • • • • • • • • • • • • • • Power supply DC/DC converter HID lighting Industrial equipment/control Computer (LAN/WAN interface) Motor control circuits (hybrid automotive, industrial) High voltage power supply LCD fluorescent backlight ballast Telecommunications equipment Medical equipment/control Switch mode power supply Input filter Resonators Tank circuit • • • • • • • • Snubber circuit Output filter High voltage coupling High voltage DC blocking Voltage multiplier circuits Coupling capacitor/Cuk Input protection for LAN/telecom products RF antenna transmitter circuits Features & Benefits • Industry-leading CV values • Pb-Free, RoHS and REACH compliant • 100% pure matte tin-plated termination finish allowing for excellent solderability • SnPb-plated termination finish option available upon request (5% Pb min) • Rated voltages of 500 V – 3,000 V • Non-polarized • High volumetric capacitance with low leakage current • Extremely low ESR and ESL • High thermal stability • High ripple current capability • Preferred capacitance solution at frequencies exceeding 100 kHz • Lead-free solder process capability (260°C) • Automotive grade available • RoHS compliant (when ordered with standard 100% Sn termination finish) Electrical/Physical Characteristics Case Size Tolerances Dielectric Options Temperature Range Voltage Options Capacitance Values 0603 0805 1206 1210 1808 1812 1825 2220 2225 2824 3040 3640 4540 ± 0.25 pF to ± 20% C0G (1 pF – 150 nF) -55°C to +125°C 500 V 630 V 1,000 V 1,500 V 2,000 V 2,500 V 3,000 V 1.0 pF to 560 nF C0G Dielectric High Voltage Ordering Information C Product Checklist Ceramic • Is your application frequency greater than 100 kHz? • Do you prefer a surface mount solution? • Do you require a non-polarized solution? • Is ripple current a concern? • Are ESL and/or ESR a concern? • Is your solder process Pb-Free? • Do you require stricter testing protocol and inspection criteria (Automotive grade) For more information, samples and engineering kits, please visit us at www.kemet.com or call 1.877.myKEMET. SA0316 X7R (10 pF – 560 nF) 1210 C 332 J Case Size (L”x W”) Specification/ Series Capacitance Code (pF) Capacitance Tolerance1 0805 1206 1210 1808 1812 1825 2220 2225 2824 3040 3640 4540 C = Standard 2 Sig. Digits + Number of Zeros B = ±0.10 pF C = ±0.25 pF D = ±0.5 pF F = ±1% G = ±2% J = ±5% K = ±10% M = ±20% X = Flexible Termination C Rated Voltage (VDC) C = 500 B = 630 D = 1,000 F = 1,500 G = 2,000 Z = 2,500 H = 3,000 1 Additional capacitance tolerance offerings may be available. 2 Additional termination finish options may be available. Contact KEMET for details. G A C TU Packaging/ Grade (C-Spec) Dielectric Failure Rate/ Design Termination Finish2 G = C0G A = N/A C = 100% Matte Sn L = SnPb (5% Pb min) See “Packaging C-Spec Ordering Options Table” on next page Copyright © 2016 KEMET Multilayer Ceramic Capacitors SOLUTIONS Electronic Components High Voltage Surface Mount Packaging C-Spec Ordering Options Table Packaging Type1 Packaging/Grade Ordering Code (C-Spec) Bulk Bag / Unmarked Not required (Blank) 7” Reel / Unmarked TU 13” Reel / Unmarked 7411 (EIA 0603 and smaller case sizes) 7210 (EIA 0805 and larger case sizes) 7” Reel / Unmarked / 2 mm pitch2 7081 13” Reel / Unmarked / 2 mm pitch2 7082 Default packaging is “Bulk Bag.” An ordering code C-Spec is not required for “Bulk Bag” packaging. The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain capacitors that have not been laser marked. Please contact KEMET if you require a laser marked option. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. 1 1 X7R Dielectric High Voltage Ordering Information 1 C 1210 C 154 K C R A C TU Ceramic Case Size (L”x W”) Specification/ Series Capacitance Code (pF) Capacitance Tolerance Rated Voltage (VDC) Dielectric Failure Rate/ Design Termination Finish1 Packaging/ Grade (C-Spec) 0603 0805 1206 1210 1808 1812 1825 2220 2225 C = Standard 2 Sig. Digits + Number of Zeros J = ±5% K = ±10% M = ±20% C = 500 B = 630 D = 1,000 F = 1,500 G = 2,000 Z = 2,500 H = 3,000 R = X7R A = N/A C = 100% Matte Sn See “Packaging C-Spec Ordering Options Table” below X = Flexible Termination L = SnPb (5% Pb min) Additional termination finish options may be available. Contact KEMET for details. X7R HV Packaging C-Spec Ordering Options Table Packaging Type1 Packaging/Grade Ordering Code (C-Spec) Bulk Bag / Unmarked Not required (Blank) 7” Reel / Unmarked TU 13” Reel / Unmarked 7411 (EIA 0603 and smaller case sizes) 7210 (EIA 0805 and larger case sizes) 7” Reel / Marked TM 13” Reel / Marked 7040 (EIA 0603 and smaller case sizes) 7215 (EIA 0805 and larger case sizes) 7” Reel / Unmarked / 2 mm pitch2 7081 13” Reel / Unmarked / 2 mm pitch2 7082 Default packaging is “Bulk Bag.” An ordering code C-Spec is not required for “Bulk Bag” packaging. The terms “Marked” and “Unmarked” pertain to laser marking option of capacitors. All packaging options labeled as “Unmarked” will contain capacitors that have not been laser marked. Please contact KEMET if you require a laser marked option. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. 1 1 SA0316 Copyright © 2016 KEMET